Related
I have been searching all over for this but it's probaly right in front of my face. I read that you need to get rid of SPL.nbh from official ROMS before flashing back with HardSPL. The problem is, the official T-Mobile Wing ROM that I downloaded is an .exe file. How do I go about removing the SPL.nbh file since it doesn't display folder contents or anything, just runs the RUU?
Sorry for the double post, I realized I was in the wrong forum
flipside123 said:
I have been searching all over for this but it's probaly right in front of my face. I read that you need to get rid of SPL.nbh from official ROMS before flashing back with HardSPL. The problem is, the official T-Mobile Wing ROM that I downloaded is an .exe file. How do I go about removing the SPL.nbh file since it doesn't display folder contents or anything, just runs the RUU?
Sorry for the double post, I realized I was in the wrong forum
Click to expand...
Click to collapse
I'm uploading a zip file which will have the entire thing already to go.
Just flash your device as you would with any other rom.
Hang tight the link will be available within 10 mins.
Thank you sir. Greatly appreciated
flipside123 said:
Thank you sir. Greatly appreciated
Click to expand...
Click to collapse
Done:
Remove HARD-SPL On The Wing
This is the same tool used to flash your device when it was not HARD-SPL.
I replaced the RUU_Signed file and SPL.nh file already.
It will bring your wing back to the stanard rom as when you first got it.
One more question. I'm looking to keep HardSPL but I have to revert to original to upgrade ROMS don't I? I want to upgrade to your OT 6.5 ROM
flipside123 said:
One more question. I'm looking to keep HardSPL but I have to revert to original to upgrade ROMS don't I? I want to upgrade to your OT 6.5 ROM
Click to expand...
Click to collapse
Okay,
I thought you wanted to go back to the original T-Mobile rom.
If your trying to HARD-SPL your device to install one of my roms or another cooks roms then thats another story.
Please read my FAQ or one of the stickies.
Ok, I think I got it now. So I don't need to revert to the original ROM to flash it since I have HardSPL? Thanks for the help
wen i did this i think i bricked my fone now its at the tmobile screen and it jus staying there
I tried the file that you uploaded here...And it went thru the whole process of flashing the ROM, but after it updated my wing just stays on the T-Mobiel screen and never boots past that.
It had that open touch software on it and I don't want open touch. I want plan old WM 6.0 on there.
I called T-Mobile and got an offical 6.0 update from them, but when I try that one it gets to 1% then says it has a disconneted and I get a connection error.
ttran001 said:
Done:
Remove HARD-SPL On The Wing
This is the same tool used to flash your device when it was not HARD-SPL.
I replaced the RUU_Signed file and SPL.nh file already.
It will bring your wing back to the stanard rom as when you first got it.
Click to expand...
Click to collapse
So does this work? The two people who did this had problems. I need the phone to be all stock so I can have t-mobile send a free replacement because the screen is going on this wing.
***EDIT:*** Oka so this is the same as http://forum.xda-developers.com/showthread.php?t=364543&page=2 the first time I tried it it froze at 15% on step 2 so I installed the RAPI CAB like it says. Step two completed, phone rebooted and had white screen then I got error 260 I think. I have the stock t-mobile rom on it and had it on before I did this but it still has the yang from when I did a hard spl. Is there another way to get it to stock or am I doing something wrong? Plug in phone, let it sync, run herald-uspl.exe hit enter and so forth.
***EDIT*** Ok so this time it completed but is now stuck at the T-Mobile screen and I am now unable to even flash because I can't get past it And that damn yang still shows up in bootloader. Well went into bootloader and flashed from there so phone works but the damn yang is still there. And on a side note: Has anyone ever had a problem with their screen going very dark after flashing a rom from here? Phone was fine then I flashed OTP v7.4 TouchFlo 2D Lite.nbh yesterday and at night screen started going dark, would light up when opened in keyboard mode, then switched and then both were very dark and hard to see. I then flashed to OTP v7.3.1 TouchFlo 2D Final.nbh and still dark. Then I flashed to stock rom and have been able to see the screen since.
This is stupid easy to do... im shocked there isnt a post going into detail.
5 steps to going back.
http://forum.xda-developers.com/showpost.php?p=2998657&postcount=4
smokeingit said:
This is stupid easy to do... im shocked there isnt a post going into detail.
5 steps to going back.
http://forum.xda-developers.com/showpost.php?p=2998657&postcount=4
Click to expand...
Click to collapse
Did not work. Do I need to install the cab files again? I know I deleted a file out of the stock rom so it would not overwrite or verify or something but I put that file back, should I not have? This has been a few weeks and still can't get the yang off. Screen on my girls phone is almost dead, she can't even slide it any more so I need to fix the spl so I can send back to t-mobile....anyone ?
this is what i do to get back to the tmobile orginal. download the software from tmobile. I downloaded the newest update from tmobile site. REMOVE YOUR SD CARD. Connected my phone via usb. Launched the update. It has never failed me yet. It is just like updating your phone. tmobile has to take it, it is their update. They sent me a new phone noproblem, matter of fact i have to do it again, the back on the phone keeps getting loose on me. so they are sending me another phone again. hope this helps.
Alternatively you can use the combination of uspl and stock rom ruu to return your device to stock tmobile rom...
1. Enter in to uspl like you were falshing one of ttran001 roms... You can get this HERALD-USPL-beta3 from http://rapidshare.com/files/79249048/Flash_Center.rar
2. ONLY use steps 1 and 2 from the black screen (getting the white screen on your device)...
3. For step 3 in the flasher exit out of the black screen (windows cmd screen) by pressing ctrl+C...
4. Fire up the official ruu from tmobile found here http://forum.xda-developers.com/showthread.php?t=358030 or alternatively if you have a tmobile account still active you can get the most up to date rom from http://www.t-mobile.com/wmupgrade/
5. Fallow on screen instructions...
6. Back to stock rom...
Brick dopod C858
ttran001 said:
Done:
Remove HARD-SPL On The Wing
This is the same tool used to flash your device when it was not HARD-SPL.
I replaced the RUU_Signed file and SPL.nh file already.
It will bring your wing back to the stanard rom as when you first got it.
Click to expand...
Click to collapse
Hello freind,
I have been downloaded the above "Remove_HARD-SPL_On_The_Wing.rar" files and flash it to my Dopod C858 which has the Chiness language, I suppose to change the language from chinesse to Englis, After flashing the above files, now the phone is only in bootloader mode.
If you start the phone it will stuck on white screen and turn off.
Please help me how to revive my phone back.
Thanks and best regards
Jhemzz
Hey I'm having the same problem as most of these guys who tried the file. The phone just idles on the white Tmobile screen... does anyone know what to do or how to help?
Please and thank you!
angest90 said:
wen i did this i think i bricked my fone now its at the tmobile screen and it jus staying there
Click to expand...
Click to collapse
im having the same problem can anyone help me please?
hotsammysliz said:
im having the same problem can anyone help me please?
Click to expand...
Click to collapse
Being stuck at the Tmobile screen isn't a true brick. Just reflash your ROM. (If you're not HardSPL'd, reflash your RUU.)
Remove Hard SPL from bootloader
Hi,
Anyone out there knows if we can remove hardspl from bootloader of Wing. Problem is my mobile displays splash screen, then switch offs by itself. Its been quite some time that I have hardspled it and have been using it. But recently I am facing this issue, so I am trying to move to original RUU and try if it works.
So for that anyone knows if we can remove hardspl from bootloader, because I am only able to enter bootloader. Moreover I tried several original roms from Flash Center as well as through SD card as well, but still be SPL version is 4.70.yang. Anyone knows any other alternative.
Also, if anyone has faced similar problem then kindly advice how you resolved.
Thanks in advance!
Regards,
Pankaj
Hi,yesterday I flashed a new rom for my wizard.
the rom is:TNT.20273_Professional_Wizard_HTC_Home_FREE
after the first reboot(soft restart)the phone is stuck in the first splash screen(where you see the IPL/SPL), even hard reset is not working(Comm manager+voice button+reset).
what can I do-please help!!!
go into bootloader mode and flash with wizard love rom thats the rom every wizard owner should have ,,and also remember before flashing to any rom 1st flash to wizard love rom
how to go into bootloader mode?
and where to get love rom from?
keep camera button in while switching phone on ,,,,and use the search option
to find the love rom
o.k I figure out the bootloader part.
but now how to flash a new rom to it?
thanks
I did it and it works alright
thank you
ohhh yey another one beats da death screen lol ,,,,,share your knowlegde
well as you said I went into the bootloader mode.
got the love rom from somewhere around here
flashed it(the installation is in Itlain I think which was somehow wierd )amd that is nowI have the love rom.
I'm currently at work so I only have vista around here.
when I'll get home I try to reflash the wm 6.1 rom again.
Thanks for the help
ok so before flashing ,1st run softspl thn flash ,well thats what i do cos if i dont it always fail.ok so wen you run softspl wait till the screen turns white then run ruu and flash ya wizard dude,btw whr do you work what country
yeahh that what I did.
I think what messed it up was that I tried to install ahh let's say unauthorized hebrew package(I'm from Israel) and after it messed it up I searshed the net and found that it can cause things like that.
I work in a start up company. we develop SW
ok sure dude me in south africa ,ya and try using xp like you said ,hope now you know how to bring the dead to life lol keep up the flashing ,WORK AT MWEB ISP OF SOUTH AFRICA
OH ANYWAY WHEN YOU KNOW ABOUT SOME NEW STUFF FOR THE WIZARD HIT ME ON MY [email protected]
oh and i think you should also change the post name,under advance
but how can I know what is safe for me?
I mean-I already know for sure I have a G4 device(I used the wizard service tool ).but how do I know if I have cid unlock or not?and how do I know what method to use?(i.e. soft/hard)?
And also I wanted to ask if you can recommend on a good rom for me?
oops double post...sorry
ok as you can see me also anewbie i only use g4 safe roms ,also got a g4 device ,if you can use more than one operator on your device its unlocked ---cell operator,,,i neva go for hardspl just soft not sure what the results are for hardspl ---so i keep clear for now ,will investigate and get bck to u,,,,the rom that i like the most is WIZFLO it got the diamond touch interface and a cool photo zooming thing ,lot off apps preinstalled another rom is slim diamond project also cool rom
I tried flashing my vox to a new rom.Since then I the unit is only letting me enter the bootloder screen!.I have tried to uspl etc but there is no connection to my pc on .It seems like the whole unit has been wiped!.Any suggestions please!
try to flash a original htc rom or an rom provided by your carrier
take out the battery first install it again directly after reboot done by romupdate! should be healed
andywareuk said:
I tried flashing my vox to a new rom.Since then I the unit is only letting me enter the bootloder screen!.I have tried to uspl etc but there is no connection to my pc on .It seems like the whole unit has been wiped!.Any suggestions please!
Click to expand...
Click to collapse
As far as i know, lot of people mentioned this problem many times but there is no S/W solution for this in this forum. Although lot of suggestions came like flash with original ROM, can u find ur original ROM, do you know its exact details??? There is no orginal ROM matching you found anywhere on net, i am sure. Try flasing cooked ROMs but not a single one will work in this situation.
Finally at last, i am 101% sure you must have to take it to service center for repair. So don't waste time and rush to a nearby service center to have a peace of mind.
Thanks for your reply!.I have already sent it back to B.T.
Andy w.
Hello guys...
Iam not new, and i have already flashed my first(it was wasted not by my fault)KAISER, it was one year ago and i did it with HARDSLPv1, and lately added some new roms cooked by sakajati(respect)...
Yesterday i bought new one(but one year old) so i tried to flash him as well, i have used HARDSPL 1.93, and then i tried to put Sakajati"s 4th feb ROM, but i come across one big trouble, everytime i try to put it on i encounter the same RUU error:
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue. Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
what to do...????
i am very afraid that i destroyed my Kaiser...???
what it means that Wince is destroyed...
Please help me, i am desperate...
Iam not new,
Click to expand...
Click to collapse
But the solution could be found here (search)
If you see the tri color screen everythng is ok, just win mobile is destroyed. Try to flash a rom from your sd card
Thank you very much...
I hope it will work, i really did search for about an hour and tried to put rom on sevral times, but i didnt find nothing 100% secure, i dont want to indanger the unit any more that i did...
thanks again, i will try it tommorow morning at my job, thats where my SD card is...
)))
greganovak said:
Thank you very much...
I hope it will work, i really did search for about an hour and tried to put rom on sevral times, but i didnt find nothing 100% secure, i dont want to indanger the unit any more that i did...
thanks again, i will try it tommorow morning at my job, thats where my SD card is...
)))
Click to expand...
Click to collapse
Part of the problem is that 1.93 is a jump spl and should be used to upgrade to Hard spl 3.29 or 3.56, not as an spl on its own. You need to run jump spl 1.93 from your device and make sure you are connected to your computer, when you see the bootloader you need to unplug your USB, count to 10 and plug your USB back in then flash a hard spl to your phone! Again 1.93 is not a Hard Spl by itself, it is only a middle man to flash a Hard Spl.
I think the best would be to flash a stock rom at first, cause therefore you don't need an other bootloader. Then flash Hardspl (3.29 if you have a kaiser or 3.56 if you have a tilt) and then flash any rom you want
i obviusly have a lot to learn, mate how do I asses if I have TILT or KAISER, what is the main difference...
[email protected]: i have already DL the stock rom before i posted the tread, i hoped on that resolution if there were no answer...
in about 10 hours from now i will get my hands on my tilt/kaiser and hope to arranged the mess i done; I drop by in any case at that time and notify you about condition and my successes...
p.s.:sorry for my poor english...
greganovak said:
i obviusly have a lot to learn, mate how do I asses if I have TILT or KAISER, what is the main difference...
[email protected]: i have already DL the stock rom before i posted the tread, i hoped on that resolution if there were no answer...
in about 10 hours from now i will get my hands on my tilt/kaiser and hope to arranged the mess i done; I drop by in any case at that time and notify you about condition and my successes...
p.s.:sorry for my poor english...
Click to expand...
Click to collapse
It realy doesnt make that much of a difference, I have a tilt and I use 3.29 and I would recomend it to anyone over 3.56 so flash either one, they will both work! And your english is great so no need to say sorry!
greganovak said:
i obviusly have a lot to learn, mate how do I asses if I have TILT or KAISER, what is the main difference...
[email protected]: i have already DL the stock rom before i posted the tread, i hoped on that resolution if there were no answer...
in about 10 hours from now i will get my hands on my tilt/kaiser and hope to arranged the mess i done; I drop by in any case at that time and notify you about condition and my successes...
p.s.:sorry for my poor english...
Click to expand...
Click to collapse
A Tilt is a At$T branded Kaiser, a TyNT II is a HTC branded Kaiser. Tilt has a different keyboard and OEM rom., only differences. People say use 3.56 if you have a Tilt because that is an AT$T Spl, but I use 3.29 on My Tilt and it works great so it doesn't really matter.
hey...
nothing seems to work...
I have tried to put default rom dl from here: http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs but the problem is that it is not bootable from SD, that has to be because the USB conection isnt on (i selected the 3.34.721.2) so i given up that way
Then i flashed the HARD spl 3.29(have kaiser) via SD steb by step first with this instruction: http://forum.xda-developers.com/showthread.php?t=433835; and it dint go through
so i tried with this instruction: http://forum.xda-developers.com/showthread.php?t=420683
it didnt work either, they are the same I know(noticed later);
So problem is that i stuck at WHITE screen that says "LOADING..."
nothig else...???
finally i manage to load/boot the htc rom from xda-wiki site, but i have to chose another one
I have tried to put default rom dl from here: http://wiki.xda-developers.com/index...me=Kaiser_ROMs but the problem is that it is not bootable from SD, that has to be because the USB conection isnt on (i selected the 3.34.721.2) so i given up that way
Click to expand...
Click to collapse
Hey man, nice to see that your device rewakes, you can flash every rom from sd card, simply rename the nbh file to kaisimg.nbh than restart into bootloader and it will automatically take the one from the card
Unfortanly, althought i would like you to be right, you are not. When i tried to do it via SD, i stuck at white screen saying LOADING...(blue) and nothih further... and i tried also the Cmonex_s Hard SPL3.29_SD which also stucks at same screen
So now (after updatig with default rom) that i have basicly normal working device i startet from the top. Using @mskip"[email protected] tutorial called: Flasing your first rom (for noobs); it all goes well, till i start to update RUU(sakajati 4 feb) if it matters, and i tried both (spls 1.56 and 1.93), it stops updatig at 17% and notrhin else then works just puting back the HTC default rom from wikiXDA side(thank god for that)
i am thinking of MTTY, although i dont know what it does guys here almoste all say it fix bad rom flash, but i am not sure if thats my main problem, i rahter think it has something with spls...
if someone has some good advice i will be very grateful...
greganovak said:
Unfortanly, althought i would like you to be right, you are not. When i tried to do it via SD, i stuck at white screen saying LOADING...(blue) and nothih further... and i tried also the Cmonex_s Hard SPL3.29_SD which also stucks at same screen
So now (after updatig with default rom) that i have basicly normal working device i startet from the top. Using @mskip"[email protected] tutorial called: Flasing your first rom (for noobs); it all goes well, till i start to update RUU(sakajati 4 feb) if it matters, and i tried both (spls 1.56 and 1.93), it stops updatig at 17% and notrhin else then works just puting back the HTC default rom from wikiXDA side(thank god for that)
i am thinking of MTTY, although i dont know what it does guys here almoste all say it fix bad rom flash, but i am not sure if thats my main problem, i rahter think it has something with spls...
if someone has some good advice i will be very grateful...
Click to expand...
Click to collapse
Hi,
I couldn´t flash my Kaiser via SD at the first time and tried something that worked.
The SD´s are formatted in Fat16 usually, try to format to Fat32... It seems like a stupid thing, but worked for me.
Reagards and good luck.
SD must be formated FAT32, to work, also I sugest a smal card, 512 or something like that, SHDC usual doesn't work
I have 1GB SD and its not shdc, so thats ok.and i have done it right now, like you two guys said so i formated it with FAT32 but still no succes.
I guess that this tree lines in red/green/blue screen arent right:
KAIS130
SPL-3.02.0000
CPLD-8
i thing this SPL has to da something to do with all this mess a have done
I have flashed a couple of roms( i had three devices) and i flashed a few for my friends and all was OK till now, and i dont know what else to do...
greganovak said:
I have 1GB SD and its not shdc, so thats ok.and i have done it right now, like you two guys said so i formated it with FAT32 but still no succes.
I guess that this tree lines in red/green/blue screen arent right:
KAIS130
SPL-3.02.0000
CPLD-8
i thing this SPL has to da something to do with all this mess a have done
I have flashed a couple of roms( i had three devices) and i flashed a few for my friends and all was OK till now, and i dont know what else to do...
Click to expand...
Click to collapse
Yes, you still have a stock spl on there. It needs to be hard spl'd before you flash anymore. Check out the stickies at the top of the forum.
hi again...
Well, I respect the "rules" of forum, thats why i wouldnt ask for insructions that are already written(thanks for the authors) with that i mean stickys, because i read them, almost all...
But I still tried once again, and I came across the same thing, i stuck at 17% when loading RUU or if i choose the VIA SD i stuck at white screen with blue text saying (LOADING...)...
nothing else helps than loading the dafault ROM by HTC... as i already said once again...
if i manage to solve the problem i will be in touch; what do you thing about MTTY
Edit 1:
i have done everything as it says in the instruction, and just like some of you "replyed" me...
but i always stuck at 17%when loading RUU, when i flash it with SPL 1.56 or 1.93 i never get stuck at white screen it always apeare the mentioned SPLs nimbers and some other text in yellow but when i then load RUUs i stuck at excatly 17% nothing less nothing more
edit 2:
yupi....yupi
i made it...
http://forum.xda-developers.com/showthread.php?t=354061 here is my lifesavior...
those instruction were the one that helped my problem...
it is very nice to ba a part of this community....
Hello everyone.
Yesterday I saw that there was a new update of my favourite rom EnergyRom. So today I downloaded it, installed it, everything went well. Until I restarted my Raphael ( raph300 btw). It kept stucking on the bootscreen.. even after I installed the rom again it still stucked at bootscreen. So I began trying to fix it with installing my hardSPL again, that didn't work either, still no further than my bootscreen.. after a while I decided to downgrade my spl to my stock-spl. that went well but still stuck on bootscreen. So I tried to install my stock-rom from my provider: (t-mobile netherlands). But then the Rom updater stuck at 0% and I received the well-known [262] error. Suddenly I saw that I stupidly accidentally installed the cdma version of EnergyRom instead of the one I needed: GSM. That explained why it wouldn't boot in the first place. Now I tried to install the olinex hardspl, but the updater stopped everytime with the 262 error. I connected my device to another computer with windows XP, but there I saw that the computer recognized it as a CDMA device.
I know it is a stupid mistake, but is there anybody who knows what I could try? I also tried to hard-reset it, but that wouldn't help either. Any help would SO be appreciated
try to search a tool called MTTY maybe it helps
lvxincad said:
try to search a tool called MTTY maybe it helps
Click to expand...
Click to collapse
Thanx, but how can I use this in combination with my problem?
As I remember 2 years ago,HardSPL is somehow depended on RadioROM. Maybe the ROM influenced the Radio with HardSPL,so try to reflash HardSPL again and Radio. Or it works absolutely not?
http://forums.techarena.in/hardware-peripherals/1161954.htm
http://forum.xda-developers.com/showthread.php?t=371154
http://htcwiki.wetpaint.com/page/RUU+Error+List
TomasNM said:
As I remember 2 years ago,HardSPL is somehow depended on RadioROM. Maybe the ROM influenced the Radio with HardSPL,so try to reflash HardSPL again and Radio. Or it works absolutely not?
http://forums.techarena.in/hardware-peripherals/1161954.htm
http://forum.xda-developers.com/showthread.php?t=371154
http://htcwiki.wetpaint.com/page/RUU+Error+List
Click to expand...
Click to collapse
No, I can't update any ROM. So now i'm stuck with my stock SPL, therefore I wanted to Hard SPL my device, but that didn't work and since then I haven't been able to update any ROM.. would flashing on a different PC help maybe? now I am on a Win7 Pc but maybe it will work in WinXP..
It is also not a bad idea to try different PC with XP to flash. I remember apx.1 month ago I tried to update HTC Trinity with WM6.5 ROM and it keeps failed with some errormessage(nowadays I can't remember which,but the syndroms was similar). Then I considered it as "bricked",until I tried another PC and everything wents correctly and the phone is in its productivity again. Yes,tfirst PC was company notebook with lot of safety kind of software(firewall,this,that,etc...) and the second one was my private laptop at home,just equipeed with regular antivirus software,all updates disabled(instead of AV).
Btw,what about trying to flash official ROM,while you are with stockSPL? Maybe it helps you to startup again the device and then HardSPL again afterwards...
TomasNM said:
Btw,what about trying to flash official ROM,while you are with stockSPL? Maybe it helps you to startup again the device and then HardSPL again afterwards...
Click to expand...
Click to collapse
yeah, that's what I thought too. I tried that also, also tried other custom roms btw before going to the stock rom. But with the stock rom it also stuck at 0% on the update
so, today I tried to flash my rom with two different computers: one with win7 and one with winXP. didn't work either.. I read the MTTY thread and after I installed the custom driver I was able to connect trough MTTY. But what commands should I use to clear the ROM and is there any way that I can update my rom via MTTY?
search MTTY on the forums the first link has all you need to clear the rom and flash via MTTY
I think you may be screwed. You should've asked for help before you started messing with the spl. I don't understand why you thought reverting to the stock spl would be a good approach; it may well be the end of your device. What you should have done is just flashed a stock rom-that would probably have restored your device. Re-flashing hard spl is kind of pointless. The only thing that can over-write hard spl is the special 'stock spl' that olinex put together. It's not entirely stock, and I am not sure that it can be over-written by hard spl. The sole purpose of the 'return to stock spl' is so that you can flash a stock rom, then restore the spl so that you can return your device for warranty/service without being dinged for having unofficial firmware on the device. When you do this, you aren't anticipating getting the device back, so I'm not sure that hard spl can over-write it. I know there have been discussions on whether or not it can be over-written, but I'm not sure that there was ever a clear answer. Anyway, with the 'stock spl' on the device, you can't flash any cooked roms to the device. If you are very lucky, you may be able to flash a stock rom. So, my advice is to try a few stock roms.
I'm pretty sure you'll need hard spl to run mtty/task 29, so I wouldn't waste your time on that. I really doubt it works, and I'm not sure what it's going to buy you, anyway. You really need to be able to flash a rom to the device, and you can't flash a cooked rom with that spl. Maybe you can flash a stock rom, but maybe not. I'm not sure which carrier it will let you upgrade to, either.
NeoTokyo22 said:
search MTTY on the forums the first link has all you need to clear the rom and flash via MTTY
Click to expand...
Click to collapse
yes I did, but the problem is that I can't access my Internal Storage, so I can't put any ROM's on that. Tonight I tried to flash a ROM via my SD card, but when I put my device in bootloader-mode it kept saying that it was 'loading...'
If the bootloader just says 'loading', then you probably need to either reformat the card to FAT32 or rename the image to RAPHIMG.nbh. Make sure you get the extension correct (not RAPHIMG.nbh.nbh).
But you're not going to flash anything with the stock spl, anyway. You need hard spl. I'm not sure you can even flash a stock rom off of the sd card-it probably needs to do it over usb.
I updated lot of smartphones already,but it was already few years ago. However I think,that SP's are flashed with MTTY. For that I needed ROM image in nbh file and with some commands you tell the PC,that it should flash it. Don't forget to disable USB connection in Activesync on XP in case MTTY will connect.
TomasNM said:
I updated lot of smartphones already,but it was already few years ago. However I think,that SP's are flashed with MTTY. For that I needed ROM image in nbh file and with some commands you tell the PC,that it should flash it. Don't forget to disable USB connection in Activesync on XP in case MTTY will connect.
Click to expand...
Click to collapse
I already managed to connect my device with MTTY, the only thing I need to know is which commands I can use to flash the ROM through MTTY. It just sucks that I am not able to go to my Internal Storage, otherwise it would be much simpler I think.
Farmer Ted said:
I think you may be screwed. You should've asked for help before you started messing with the spl. I don't understand why you thought reverting to the stock spl would be a good approach; it may well be the end of your device. What you should have done is just flashed a stock rom-that would probably have restored your device. Re-flashing hard spl is kind of pointless. The only thing that can over-write hard spl is the special 'stock spl' that olinex put together. It's not entirely stock, and I am not sure that it can be over-written by hard spl. The sole purpose of the 'return to stock spl' is so that you can flash a stock rom, then restore the spl so that you can return your device for warranty/service without being dinged for having unofficial firmware on the device. When you do this, you aren't anticipating getting the device back, so I'm not sure that hard spl can over-write it. I know there have been discussions on whether or not it can be over-written, but I'm not sure that there was ever a clear answer. Anyway, with the 'stock spl' on the device, you can't flash any cooked roms to the device. If you are very lucky, you may be able to flash a stock rom. So, my advice is to try a few stock roms.
I'm pretty sure you'll need hard spl to run mtty/task 29, so I wouldn't waste your time on that. I really doubt it works, and I'm not sure what it's going to buy you, anyway. You really need to be able to flash a rom to the device, and you can't flash a cooked rom with that spl. Maybe you can flash a stock rom, but maybe not. I'm not sure which carrier it will let you upgrade to, either.
Click to expand...
Click to collapse
Oke, thanx for your input. I tried to reset my ROM memory with mtty/task 29, but that didn't work, just like you predicted. So my next question is: 'Is there any app that can perform the task 29 without MTTY?'. I googled it, but I could only find the task 29 app for the HTC HD2.. And further, does anybody have a recovery ROM for my RAPH300? I tried the stock ROM on the XDA thread of HTC Raphael, but still got the 262 error
There's really no point in doing Task 29. The bad rom isn't what's killing you now, it's the SPL. It's going to block task 29, no matter what you try (that's one of it's jobs). You should just try to get hard spl back on the device, or try flashing every stock rom you can find. I tend to doubt that either will work, though. The only other option would be to look up the jump spl developed by PoF. I don't remember the name (search for threads started by him), but it was a universal soft spl that would temporarily CID unlock devices so you could flash custom roms. I've never used it before, and I don't know how it loads. You may not be able to load it onto your device with its current state, and it may not even be compatible with a Raphael (it's 3 or so years old), but it's probably worth at least checking out.
Edit: here's the jump spl link. I think you may have to activate it off the device.