I have 2 questions:
1. Internet over wifi doesn't work. I think wifi is working fine, becouse conmanager easiliy find my home AP and conect to AP.
But IE dosn't working at all over wifi,and over usb(activsync) IE working fine. Any solution??
2. Can i use activesync over wifi or join to my local network over wifi?
I have Qtek 8310
ROM: Greek WM6 ROM v5 by NiTroGen
OS: WM6 5.2.1616.18120 - Radio: 02.61.01 - SPL: 2.00.0014
budy wi-fi connection has some issues, that it gets connected with pc, or ppc, coz the connection settings are stored in router.. but as the connection remains down so IE wont work atall..and on wi-fi router u cant guess net connection is working or not.. check with ur net connection..
malhaar said:
.. check with ur net connection..
Click to expand...
Click to collapse
i think i don't understand u...
i can connect my laptop on my AP,
solution is maybe in aplicatio "Tornado Wi-Fi Settings "
siouxNS,
I had similar problem on XDA IQ. WIFI was connected to the AP, but IE was stuck in 'locating', and after some time (about 1 minute) error message appeared. I noticed, that when pinging my phone IP from laptop (also in my home network) few pings were ok (just after wifi connected to the AP), and rest of them timeouted. Sometimes, but very rarely, all ping responses were ok (I used ping -t on windows).
So, what I did to get wifi connection working:
1. started IE, when wifi is off
2. started wifi
3. shortly after wifi connected to my AP, I opened some internet page in IE (try to use one, that is not cached) - and it worked
And this works for me every time now.
Few more things:
- check that IE uses the same connection, to which wifi is assigned.
- you can use WLAN IP manager to manually set your IP, gateway and DNS servers
- my system is: windows mobile 6, OS 5.2.318, build 15341.0.0.1
hey guys,
I have the same problem. just flashed the new v3.6, can connect to the router, can even ping the mobile from my laptop via wlan, but still get the no connection error - from IE and opera.
what can I do?
EDIT:
finally got it. just had to change the type of internet from 'private/work' to 'internet'. thats it. stupid comment about vpn under it confused me...
fikol5 said:
siouxNS,
I had similar problem on XDA IQ. WIFI was connected to the AP, but IE was stuck in 'locating', and after some time (about 1 minute) error message appeared. I noticed, that when pinging my phone IP from laptop (also in my home network) few pings were ok (just after wifi connected to the AP), and rest of them timeouted. Sometimes, but very rarely, all ping responses were ok (I used ping -t on windows).
So, what I did to get wifi connection working:
1. started IE, when wifi is off
2. started wifi
3. shortly after wifi connected to my AP, I opened some internet page in IE (try to use one, that is not cached) - and it worked
And this works for me every time now.
I will try that
Few more things:
- check that IE uses the same connection, to which wifi is assigned.
its ok
- you can use WLAN IP manager to manually set your IP, gateway and DNS servers
Click to expand...
Click to collapse
whatkind manager u use? i use "tornado WI-FI settings"
on home network i use static IP's
adsl router, 192.168.1.1 (gateway)
wirelles AP 192.168.1.252
phone is connecting with 192.168.1.5 ,
can i use DHCP and DNS?
one more thing, when i go in some caffe with hotspot i don't have any problems with connecting and surfing.
anyone know of a program that will automatically power on the wifi when a data connection is required?? I would like a program that not only did this, but would attempt to connect to any available wifi access point, and if none were available to then allow the gprs connection and power down the wifi
Hi,
At my university they have WiFi in all the buildings.
I can connect to the modem without a problem, but to have acces to the internet I have to connect through VPN otherwise it won't let me browse the web.
So I go to Settings>connections>VPN and I put all the data in it like pptp,username,pass and server, I don't know what I have to chose for 'Make connection from (internet, work, mss, wap, ipaq wap)... and Make connection with(internet, work, mss, wap, ipaq wap)..."
My question is how can I activate that VPN setting?
I connect to wifi but there is no such thing as launching the vpn settings in it...
Plz help, thx!
grtz
i dont have a wiriles network at home so my question is wen i connect my diamond 2 to the pc can i use my internet of my pc then? i hope so because with GPRS i exspensef sorry for my bad english
hope someone reply
THANX
If you connect your device via usb activesync than it will automatically use the computer's internet connection. (I think this is the default windows mobile behavior).
remakeru said:
If you connect your device via usb activesync than it will automatically use the computer's internet connection. (I think this is the default windows mobile behavior).
Click to expand...
Click to collapse
thnx man i'm happy to hear this
because with GPRS it is really exspensif
i cant really scan the network in my house, how?
wenxi said:
i cant really scan the network in my house, how?
Click to expand...
Click to collapse
For a wireless network do the following....
Make sure that your router is not set to hide your network (Broadcast Network option should be on).
If you have used mac protection (an option on your router) then you will need to first get the mac address of your Topaz and put into into your router security.
On your Topaz do the following:
1) Go to the communications option under the setting page.
2) Turn WiFi on.
3) Press on the Wi-Fi option and it will show a screen of networks it finds and the signal strength
4) Press on your network
5) If your network is passcode or wep enabled then you will be prompted to enter the key
6) Save the connection (move to first preference if possible so it is faster to connect)
You can now select to hide your network on your router if you want to
If you set the network to autoconnect then when you turn on your WiFi in the future the network will connect automatically if in range
I have an issue with a Sprint TP2 with WIFI. I'm able to connect the router but not able to access the internet. If I connect my phone to the laptop I can use the internet if I change the (Connections:connections: network management) from Sprint to My Work Network but I'm not able to connect via WIFI. I have (Connections: wifi:configure network adapters) to WORK or THE INTERNET for Broadcom 802.11 DHD Network Adapter but it doesn't help. Under Connections: tasks:MY WORK NETWORK:Set up my proxy server I check the box next to THIS NETWORK CONNECTS TO THE INTERNET but it won't stay checked. The profile for the router has been deleted and recreated with no success. I've tried other WIFI routers with no success. My touch pro has no issues. BTW: I'm using version WM6.5.