I can't get Pocket MSN to work, Internet explorer works fine but whenever I try to use pocket msn, i get the error:
"logon to the msn messenger service failed because the service is not responding. please try again later."
Anyone know why this could be happening?
thanks
if it's an older rom then ms have a patch which need to be installed it can be found on their page
I dont think its an older rom, i just updated with the AKU2 for the O2 Mini S. I also cant find any patch/update on the Msn mobile page
phenom9 said:
I can't get Pocket MSN to work, Internet explorer works fine but whenever I try to use pocket msn, i get the error:
"logon to the msn messenger service failed because the service is not responding. please try again later."
Anyone know why this could be happening?
thanks
Click to expand...
Click to collapse
Hi there, i had the same problem, dont know if you allready searched the forum about it, but a sort of answer can be found!!
Anyway, have you tried login in while conected to a Wi-Fi network?
If this is the case i have the same problem for now, i cant login while connected to a wireless network, but when i put th wizard in the craddle and i try from there i always am able to connect.
So try connecting while plug-in trough the cradle, this is the only way for now that at least for me works.
Greetings, RightOn
The Problem: I cannot get Exchange to sync correctly when using any 6.1 ROMs.
AT&T Tilt
AT&T SIM
Exchange 2003
Radio: 1.58.26.20
I really need to be able to Exchange sync in order to accomplish my job. From reading though the many 6.1 threads and searching around, I have found that people seem to be occasionally running into this problem, but there hasn't been any resolutions mentioned yet. The problem for me is that synchronization will not occur in ActiveSync. At one point, it would sync my contacts even though it said the sync failed. Others have reported that it will sync contacts and calendar but not email.
The Active Sync error code that I get after flashing a new 6.1 ROM and setting up Exchange the normal way is:
Result: Synchronization could not be completed. Try again later.
Support Code: 0x80830003
Here is a list of things that I have tried so far from searching and asking around that did not work:
1. Didn't work: Installing "remove hidden proxy" .cabs.
2. Didn't work: "What, exactly, are you having issues with? It's not an Exchange 2k3 incompatibility, as mine is synching fine. I did have to go into Settings > Connections > USB and turn off advanced network capabilities, though."
http://forum.xda-developers.com/showpost.php?p=1940649&postcount=1155
3. Verify the following Exchange setting (already checked): "On the Exchange server, launch Internet Services Manager. Right click on the Microsoft-Server-ActiveSync virtual directory and choose Properties. Select the Directory Security tab. Click the Edit button in the Secure Communications section and select the option to 'Ignore client certificates.'"
http://download.microsoft.com/downl...ices-Deploying_Microsoft_Mobile_Messaging.doc
4. Verify the following Exchange setting (not running Exchange 2007): "I also had trouble syncing with Exchange. I run Exchange 2007 and had to enable the option to allow the enrolment of non-supported devices in my ActiveSync policy. With WM5.0 or 6.0 it always worked flawlessly."
http://forum.xda-developers.com/showpost.php?p=1938858&postcount=1025
5: After trying kewlair's suggestion:
"The first issue I had was the initial setup. I set up my account properly, but ActiveSync would report that it cannot sync at this time. I knew that I had to uncheck the Use Proxy for this Connection option to solve this issue, but I couldn't find where to get to that setting for the MEdia Net connection that was being used. I finally found it in Settings -> Connections -> Advanced Tab, then tap the Select Networks button and where it says "Programs that automatically connect..." select MEdia Net instead of My ISP and then you can tap the Edit... button and remove the proxy server selection."
http://forum.xda-developers.com/showpost.php?p=1957501&postcount=3
...attempting to force a sync gives this. I also tried changing "Programs that automatically connect..." to My ISP with the same result:
ActiveSync tries to connect using either MEdia Net or My ISP and then says:
"Cannot Connect
Dialed: Cannot connect for an unknown reason. To check your connection settings and change them if needed, tap Settings. If the problem continues, reset your mobile device according to your manufacturer's documentation and try again."
ActiveSync Reports: "Waiting for network"
Right i am pissed so i might be being a ****, but, it would help if you told us
a) what version of exchange you are running.
b) whether you are using ssl to sync with the server
c) whether you are talking about syncing when connected to the pc, over gprs or such, or both.
Rob
Yeah, I have noticed some issues as well. I'm using dutty's official 6.1 release.
The first issue I had was the initial setup. I set up my account properly, but ActiveSync would report that it cannot sync at this time. I knew that I had to uncheck the Use Proxy for this Connection option to solve this issue, but I couldn't find where to get to that setting for the MEdia Net connection that was being used. I finally found it in Settings -> Connections -> Advanced Tab, then tap the Select Networks button and where it says "Programs that automatically connect..." select MEdia Net instead of My ISP and then you can tap the Edit... button and remove the proxy server selection.
The second issue I have found is that after a while (not sure on specific time) ActiveSync just seems to stop working, almost as if it is hung up. When I go to the ActiveSync window and tap Sync, it does absolutely nothing. Basically the only way i've found to get it to start working again is doing a soft reset.
Hopefully this will help you or other people out, because it took me FOREVER to figure this out. I am curious if anybody else is having problems with ActiveSync stopping responding with 6.1 also.
Same here
Hello,
I am having the same problem here.
I am using DCS 1.5 and windows Vista (Windows Mobilde Device Center). It has been working beautifully for a week..
But now I cannot connect the device to my computer through USB. When I do the charge led is on, but the device is not seen by vista.
I checked off "enable advanced network functionnality" in the USB to PC settings.... But nada!
Any help from otehrs would be appreciated.
Juju
I'm sorry, I might not have been clear. ActiveSync on the device hangs up, not on my computer. I haven't had any issues with ActiveSync on my computer so I think this is a different issue.
rjefferis said:
Right i am pissed so i might be being a ****, but, it would help if you told us
a) what version of exchange you are running. Exchange 2003
b) whether you are using ssl to sync with the server. No SSL.
c) whether you are talking about syncing when connected to the pc, over gprs or such, or both. The PC sync works fine, but over the air it does not.
Rob
Click to expand...
Click to collapse
See answers.
kewlair said:
Yeah, I have noticed some issues as well. I'm using dutty's official 6.1 release.
The first issue I had was the initial setup. I set up my account properly, but ActiveSync would report that it cannot sync at this time. I knew that I had to uncheck the Use Proxy for this Connection option to solve this issue, but I couldn't find where to get to that setting for the MEdia Net connection that was being used. I finally found it in Settings -> Connections -> Advanced Tab, then tap the Select Networks button and where it says "Programs that automatically connect..." select MEdia Net instead of My ISP and then you can tap the Edit... button and remove the proxy server selection.
The second issue I have found is that after a while (not sure on specific time) ActiveSync just seems to stop working, almost as if it is hung up. When I go to the ActiveSync window and tap Sync, it does absolutely nothing. Basically the only way i've found to get it to start working again is doing a soft reset.
Hopefully this will help you or other people out, because it took me FOREVER to figure this out. I am curious if anybody else is having problems with ActiveSync stopping responding with 6.1 also.
Click to expand...
Click to collapse
Lots of good info there. Thanks and I will let you know if this works the next time I flash.
kewlair said:
I'm sorry, I might not have been clear. ActiveSync on the device hangs up, not on my computer. I haven't had any issues with ActiveSync on my computer so I think this is a different issue.
Click to expand...
Click to collapse
juju-35's is a different issue. I agree. I am talking about over the air sync/push. I will try to edit the thread title to be more clear.
Camp said:
juju-35's is a different issue. I agree. I am talking about over the air sync/push. I will try to edit the thread title to be more clear.
Click to expand...
Click to collapse
Sorry for the confusion, I thought you were talking USB since you mentionned the PC to USB thing. Still annoying though . I will repost in the DCS thread!
Direct push works without issues over AT&T's network on 3.0 Sleuth. My job depends on it working too. I've used it over MEdiaNet and My ISP connections although you need to be able to use my ISP to get it to work correctly (without 7minute delays). You can tell if its using the correct connection by waiting for direct push to connect after a reset then tapping on the big 3G icon. It should say its connected using My ISP (this assumes you let the connection wizard discover your provider and set you up of course).
The only difference between your settings and mine is that my email system uses SSL.
Certs aren't an issue if your exchange implementation doesn't need SSL.
I would really like to see the exact activesync error code you are getting btw.
Sleuth255 said:
Direct push works without issues over AT&T's network on 3.0 Sleuth. My job depends on it working too. I've used it over MEdiaNet and My ISP connections although you need to be able to use my ISP to get it to work correctly (without 7minute delays). You can tell if its using the correct connection by waiting for direct push to connect after a reset then tapping on the big 3G icon. It should say its connected using My ISP (this assumes you let the connection wizard discover your provider and set you up of course).
The only difference between your settings and mine is that my email system uses SSL.
Certs aren't an issue if your exchange implementation doesn't need SSL.
I would really like to see the exact activesync error code you are getting btw.
Click to expand...
Click to collapse
It also happened to me on your newest 6.1 ROM Sleuth, thanks for chiming in here. I can only work on this issue during the weekend because come Monday I have to reflash to a working 6.0 ROM. I just reflashed with Dutty's newest 6.1 ROM and here are my updates (updated in first post also):
The ActiveSync error code that I originally got with all of the 6.1 ROMs is:
Result: Synchronization could not be completed. Try again later.
Support Code: 0x80830003
After trying kewlair's suggestion:
"The first issue I had was the initial setup. I set up my account properly, but ActiveSync would report that it cannot sync at this time. I knew that I had to uncheck the Use Proxy for this Connection option to solve this issue, but I couldn't find where to get to that setting for the MEdia Net connection that was being used. I finally found it in Settings -> Connections -> Advanced Tab, then tap the Select Networks button and where it says "Programs that automatically connect..." select MEdia Net instead of My ISP and then you can tap the Edit... button and remove the proxy server selection."
I get this ActiveSync error code. I also tried changing "Programs that automatically connect..." to My ISP with the same result:
ActiveSync tries to connect using either MEdia Net or My ISP and then says:
"Cannot Connect
Dialed: Cannot connect for an unknown reason. To check your connection settings and change them if needed, tap Settings. If the problem continues, reset your mobile device according to your manufacturer's documentation and try again."
ActiveSync Reports: "Waiting for network"
Thanks for all the help so far everyone.
Anyone else have any other ideas that I can try?
Have you tried not letting the network communication run and enter the att network connections manually. Just say No to configure your network config. I have had issues with the network communications auto setup.
1) Set up My Isp to use either wap.cingular or isp.cingular (depending on you data plan) and not setup the proxy.
2) Set up the work connection as medianet to use wap.cingular with the proxy setting
3) Set up MMS connection using the correct setting and using work connection (medianet) with proxy.
It really sounds like your issue is related to the network settings. If you look up your active sync error code on google all seem to point to the ATT proxy issues.
Good Luck
All
I use push Mail and have tries Sleuths and duttys 6.1 ROM without issues
SSL based Authentication
Cheers
Mario said:
All
I use push Mail and have tries Sleuths and duttys 6.1 ROM without issues
SSL based Authentication
Cheers
Click to expand...
Click to collapse
Same for me DCS 1.5 and now 1.7 with SSL no problem at all
Everyone does not need to post that yes it does work. Mine works as well as 99% of other people. This thread is just for the OP and any others whose does not work.
Yes, It does work for 99% to 99.9% of people!
eagle 1 said:
Everyone does not need to post that yes it does work. Mine works as well as 99% of other people. This thread is just for the OP and any others whose does not work.
Yes, It does work for 99% to 99.9% of people!
Click to expand...
Click to collapse
Thx but in that case error code would help. Because not working could come from many factor.
More strange is not working config when "upgrading" from WM6 to WM6.1 with STRICTsame config...
So if people could put more details it will help
The error code indicates that your exchange server is set to use client certs btw. Here's the exact recommendation to fix:
1. On the Exchange server, launch Internet Services Manager. Right click on the Microsoft-Server-ActiveSync virtual directory and choose Properties. Select the Directory Security tab. Click the Edit button in the Secure Communications section and select the option to “Ignore client certificates.”
Click to expand...
Click to collapse
This is a server-side fix though. If you're not the IT staff that did this, then you need to get them to give you the client cert again.
your upgrade to WM6.1 caused your client side cert to disappear. The cert store on WM6.1 contains different certs in the root store as well which could cause WM6.0 to have the cert your exchange server requires but not this beta version of WM6.1.
Exchange installations which require client side certs are very rare btw which is why everybody is saying "works great here". Generally, server certs are used instead (require SSL must be checked in this case)
eagle 1 said:
Have you tried not letting the network communication run and enter the att network connections manually. Just say No to configure your network config. I have had issues with the network communications auto setup.
1) Set up My Isp to use either wap.cingular or isp.cingular (depending on you data plan) and not setup the proxy.
2) Set up the work connection as medianet to use wap.cingular with the proxy setting
3) Set up MMS connection using the correct setting and using work connection (medianet) with proxy.
It really sounds like your issue is related to the network settings. If you look up your active sync error code on google all seem to point to the ATT proxy issues.
Good Luck
Click to expand...
Click to collapse
Solved. Thanks for everybody's help on this issue. eagle 1's answer above helped me find out what was wrong.
It was a really simple solution, but I have never had to mess with any of these settings on any of my previous WM devices. The solution was: The "Connection Setup" wizard did not set up my connection settings correctly. I had to set BOTH "Programs that automatically connect..." drop down options in the advanced connection settings to MEdia Net.
Thanks again to everyone that helped out.
surprising that you got a 0x80830003 error instead of the more common 0x8500200B (failed to contact server) message
Hi,I'm having problem, connecting internet, using internet explorer.Each time I try to access any site,it says 'The addressis not valid.Check the address and try again.'
sans33 said:
Hi,I'm having problem, connecting internet, using internet explorer.Each time I try to access any site,it says 'The addressis not valid.Check the address and try again.'
Click to expand...
Click to collapse
Try installing opera 9.5, after that you can comletly forget about PIE
Cheers
orb3000 said:
Try installing opera 9.5, after that you can comletly forget about PIE
Cheers
Click to expand...
Click to collapse
Friend, please guide from where to get it.
Downloaded opera,but it doesn't open certain wap sites.Seems lik it doesn't support xml pages.
Any help with internet explorer settings?
pie dont really have it's own settings it should just use the normal connection settings as
messenger and opera
unless you setup some proxy dns or other wrong connection settings for your operator
It's not a software issue. I would go for DNS lack. How do you connect to the internet, GPRS or WiFi?
I use both gprs and wifi.Till three days ago,everything was fine.Now Opera and Iris browser are ok,but explorer shows same error message for both connections.It doesn't even try to connect to gprs.
Hi people.
I have an HP IPAQ 514 Voice Messenger, I was using Operamini 3.x before in my phone. I updated to rom 2.05.x and tried to install Operamini 4.1 but it hangs at the end. It downloads the jar/jad files, starts the setup, asks me to use the internet connection, I say "use and dont ask again", it starts the other installation process but the process bar never fulfils. It hangs always at the same place. I close the java interface, open again and it says: "Operamini application paused, would you like to continue", I say yes, and it sometimes comes to the point where it hanged or sometimes starts over and hangs at the same place again.
I tried to install Operamini 3.x back, but it wont either install anymore. It says "you dont have an internet connection". I tried with both Wi-Fi and ActiveSyncs RNDIS, but no luck. With the both connections I test the internet with IE; I can surf all the places, but Opera claims that I dont have a connection. I even tried opening the both Wi-Fi and RNDIS connections at the same time.
Btw, I am using the Operamini installation file for IPAQ 514 and with no signature.
Anyone knows whats the problem and how to solve it?
Thanks in advance.
For a while now my Portable Internet Explorer mobile or QuickGPS won't connect. I thought only the QuickGPS was the problem but then someone on the forum indicated that I check out iexplore.exe and lo and behold it also wasn't connecting. Not with wifi, gprs or even activesync. I'm loath to try a hard reset but I really want them to work (especially the quickgps).
Am using an original Polaris windows 6.1 rom.
Radio 1.58.26.20
The actual error says, "The address is not valid. Check the address and try again."
This occurs whether I'm connected with Activesync, wifi or EDGE/3G/GPRS. As a result, my QuickGPS won't connect either. HELP!
Fiddling around in AdvancedConfig has brought my Internet Explorer back into working status but am not getting the same luck with QuickGPS updates.
Am still getting "Connection failed. Please try again." So am trying to find a good guide on what to do to fix it but the forum isn't very forthcoming.
(BTW am replying over and over so that my efforts can be a guiding light for others, and hopefully I'll get a reply that will help me finish this.)
Did you sync it to a PC with proxies? the phone will automatticly use them, if you did, try disabling them
How I go about that? Cuz I sync it to my PC alot but am not sure if I sue proxies.
"Start, Control Panel, Internet Options, Lan Settings" if the boxes are filled in, you use Proxies
Nope. And let me reiterate, I've got Portable Internet Explorer working again but QuickGPS still isn't.