hi all
i put shekars rom on my xda ii . tomtom 6 running fine after i replaced it with the hex edited tomtom 6 version on the other thread without having to install cab file permissions
however when i put fone on vibrate ,then put it back to on ... then ring mytself from another phone ... altho volume still says on not vibrate/off it will still vibrate
howevr if i leave phone until screen goes blank and into standby mode and then ring it it will ring as normal
btw way flight mode working fine on my xda ii so i even treid changing to flight mode then back to on still not good
Related
I flash the my hima with the TofClock 2.01a32WWE ROM, and it works fine, and I'm very glad with it.
But now, some time I turn off my hima by pressing the power button, the screen went black, after a while, I want to light it to operate, the hima keeping black, and the hima cannot operate any more, and I tried to call my phone(hima), the hima didn't ringing. Also, SMS, MMS, all function dead. But the same time, the 2 leds, Blue and Green/Red, flash like normal.
At this time, the only way to operate hima normally was soft-reset it by press the hole with my pen.
:shock: :shock: :shock: :shock:
Is there someone experience this situation, and is there some way to solve the problem.
:idea: :idea:
ps: in the Settings --> System --> Power --> Advanced page, the 2 options can set "Turn off device if not used for" some minutes, when "turn off" time out, the same problem occurs like above, I called it Auto Turn Off
My device is Dopod 696 (Maybe Chinese mainland version of O2 XDA II).
:wink: :wink:
I also experienced similar problems, but with the 64 version.
After a while, when I tried to turn it back on, it began to act strange. First the automatic turn off backlight option was every time reset to 10 sec and then after a day or 2 I noticed that the screen was sometimes still showing some black lines. Changing the volume still gave the corresponding sounds, but nothing else seemed to work (or wasn't visible). Normal operating mode was only reinstated after a soft-reset.
I gave it a hard reset and restored a backup (using SPB). It's operating again, but it already contains the 10 sec change.
So probably have to start clean again and install everything from the beginning, but before I do I would like to make sure it will not happen again.
Appears like the Power Off option is screwed, no matter in which way I use it (button or a program).
Anyone have any thoughts on it?
zplei
yes, i have same problem on my O2 XDA ATOM
with last rom and other
I have the same problem too, the only ay to have it back is softreset
i was using spb to toggle display mode.
someone said can be solve by reegedit. but how to.
anyone found a solution..?
Hey all, I am having an issue with my Tilt locking up after it goes into sleep mode or stand-by mode. Not sure which one, but it happens when I'm on a call or when I soft-press the power button, to force stand-by mode. I already disabled the "Fast sleep" & "Sleep", but it sucks the battery like crazy. I want to leave that feature on, but after a call ends after the phone goes to sleep, all I get is a black screen, like it's in sleep mode. All buttons don't respond, including the "power" button, so all I can do it a soft-reset. One thing I figured is that when I lock it BEFORE it goes into sleep/stand-by mode, I can still access it if I need to by waking it up.
I don't want to do a hard-reset right now, for those who are thinking that, & it was working fine on my stock AT&T rom, but noticed it on Dutty's 6.1 rom and now, Sleuth's 3.03 rom. I was wondering if there was a way to program WM6.1 to lock the device before it goes into sleeps/stand-by mode. I installed MortScript, but have no idea how to attach that file to run BEFORE an automatic sleep mode, forced by WM6. Any help or suggestions would be great!!! Thanks!!
This is a well known issue with the Tilt/Kaiser. It particullarly affects devices when BT or WIFI is left on & unattended.
I have used both Dutty & Sleuths 6.1 ROMs on both my devices, a Tilt & a TYTNII, without this issue occuring.
It did occur on the stock ROM, but only when left to sleep while using WIFI, GPS or BT. This can especially happen if you mess with the power properties of the devie with KaiserTweak, etc.
I got FRX06 loaded on a microSD, configured with RHOD500, popped it in the HTC Touch Pro II (Sprint), and all was happy the first time. Made a phone call from XDAndroid, all was going good.
Subsequent runs, XDAndroid is stuck in airplane mode. To resolve, I've tried:
1) Turning airplane mode off in settings. Every time I go back, I find airplane mode turned on again.
2) Seeing if in Windows, airplane mode is turned on. It is not.
3) Starting from scratch and replacing everything on the microSD card from the original FRX06 contents / download. Booted up, went through install again, after install, ended up in airplane mode again.
Any ideas? What was done for XDAndroid is sweet, I wanna show the franken-phone!
Hi i have Qtek S200 and i put WM 6.1 now it loads to 100 % when instaling and then the phone has shut down . After 5 minutes of waiting i turn it on and boom 3 colors apear i think i dont meet the System Requairments. Now i even cat start it, or if i start it come this screen with 3 colors for 2 seconds and booom black screen like its turned on now i cant go back my phone to original Rom how to fix it if someone know help.
Hi,I got a HTC Touch Pro T7272(Raphael 100)and last week while i was pressing down the volume down, the device shut down automatically and since then...when i on it the screen will boot up with tricolour.I tried to re-flash the ROM but it still boot up in the same way.The device do work(start up windows mobile) when I press down the on button+center button+soft reset.But after that the screen will keep blinking up the volume column and when i tried to increase the volume, it automatically decrease it again(still blinking).And I am wondering that any expert here can teach me how to save my T7272??Is there anyway to make it back to normal start up??
PSlease......help if any expert read this and know how to fix it...
Thanks in advance...
SPL-1.90.OliNex
TAEL ROM