Database Info

Playing music thru wired headset, incoming call forces play thru built-in speaker??

this is a major annoyance... I've had a Samsung i760 for a couple months now and have found it seems to have a serious design flaw.
I like to listen to music at work, through my phone using a wired headset (two way headset with mic). I work in a quiet office environment. I always set my ring to silent/vibrate while at work. If I'm listening to music, and happen to receive a call, the music will stop playing through the headset and will start playing through the built in speaker of the phone for all my coworkers and supervisor to hear.
The music would continue to play like this even after answering the call... I have to bring up the player and stop it manually. I was able to partially alleviate this by disabling the 'play in background' setting. With that, the music will still play through the external speaker briefly, roughly 3 seconds, before the player pauses the song. Which is still unacceptable.
I have tried TCPMP and Windows Media and had the same result.
Also, if I have the phone set to ring audibly, the ring is forced through the speaker as well, and the music I was listening to AND the ringtone will play at the same time for those 3 or so seconds.
what I'm hoping someone can help me with is a) a way to make ringtones play through the wired headset if possible, or b) at least keep the sound from being forced through the external speaker when the wired headset is connected and I recieve a call. As it stands, I either can't listen to music at work (a big part of why I bought the phone), or I have to turn the phone receiver off and risk missing calls. Either option sucks and is making consider another phone... though I don't know if this is a WM6 issue or an issue with this specfic phone.
any help would be greatly appreciated!

*bump* anyone?
any way thru the registry to disable the built in speaker alltogether while leaving the headphones operational?

On Acer s200, you can change the value of registry key HKLM\Software\Acer\Scenario\HeadsetIn to 1...
Maybe that can help...

Fuze - connect A2DP to car stereo for music, and HFP to Jawbone at same time?

Hi,
I searched the forum, wiki, etc., but didn't find an answer.
I have an AT&T Fuze with the stock ROM (WM 6.1). I know the Fuze is supposed to support multiple simultaneous bt connections. What I would like to do is connect A2DP to my Pioneer stereo for music playback, and also connect handsfree to my Jawbone 2 headset for phone calls while in the car.
I can successfully connect A2DP to my stereo for music by itself.
I can successfully connect HFP to my Jawbone 2 by itself.
I *have* managed to connect to both at the same time, by staying on an active phone call with my Jawbone, then telling my Fuze to connect to the car stereo. However, no music could be heard (from either Mortplayer or WMP). The phone call stayed up just fine though.
Anyone know if there's a way to get both working at the same time?
(And before you ask, I would just use the hands-free capability of my Pioneer stereo for phone calls too, but I've found my car is too noisy for anyone to hear me with the Pioneer's microphone unless I hold it right in front of my mouth, which defeats the "hands free" goal...)
Thanks for any help you can offer.
Best,
Chris

In your case I do not think that is possible since the concept of being able to juggle 2 devices at the same time requires 1 to relinquish control while the other goes active. It turns off the music so you do not get distracted while talking and reconects the music after the call is over.
It seems to be a software protocol if anything. Yes both can be connected at the same time, but both cannot be "active" as in doing both music playback and voice calls.
I have a bt headset that handles 2 profiles at once and according to the protocol, if a call comes in, it pauses my ipod and then picks up the call and then resets back to normal after the call.. Either you have to mess with the coding itself or someone has to come up with a workaround, but I do not think that is possible.

Thanks for the reply. I had hoped it might be possible for the Fuze to route stereo audio to one BT profile (A2DP), while non-stereo audio (e.g., phone call, system tones, etc.) to the HFP profile, almost as though the profiles acted as addressable "service ports" (ala HTTP, SMTP, etc.).
But, unlike with TCP/IP, I admit to knowing next to nothing about how the BT stack works and how profiles are applied to certain types of data (or, how data is routed to a given BT association based on profile).
Thanks again,
Chris

well the thing is.. the fuze can connect to multiple devices simultaneously, but based on the music and voice call order, it is prohibited from doing both at the same time. so therefore when there is no call, the music plays, but when a call comes it, the music is paused and resumed after the call is done. (obviously the call has higher priority here).
My only suggestion is to leave it as it is since it is done so that you do not get distracted while talking and probably while you're driving.
Multitasking is difficult when you're listening to 2 things, responding to 1, and driving at the same time. The more you multitask the less you are able to devote to your main activity (in your case, driving).
but yeah. if you can find someone who can mess with that and allow for both to be active at the same time, then congrats. Otherwise just think of it as a safety measure.

Except that, when I had both the headset and the stereo connected to the Fuze, the music *didn't* pause. It just didn't output (as though the volume was muted). In fact, in both Mortplayer and WMP, it appeared as though it was playing at ~2X the normal rate (just watching the track playback time counter).
I know what you're talking about re: listen to music, call comes in, music pauses, call ends, music resumes. That's the behavior I get when I use the car stereo for both handsfree and A2DP.
The behavior when connected to two different devices seemed to be different, though, so I hoped that might mean it was in fact possible.
-Chris

yeah I know what you mean, but maybe the fact that it tried to do both tripped it up and so it took the call as a higher priority and focused the data towards the call.
atleast that is what I think.

I have almost the exact same configuration, except I am using a Sony car stereo but have a jawbone. What I have to do every time I get in the car is the following.
1. Let my stereo connect to both hands free and wireless headphone services.
2. Open bluetooth settings
3. Manually connect to my Jawbone.
It works great.
ATT Fuze
Energy Rom 072209
Old jawbone
Sony XPLOD Car Stereo

I'll also add it's pretty neat to be able to push the jawbone to activate MS Voice Commander and choose what music I want to play over my car stereo.

frankrizzo said:
What I have to do every time I get in the car is the following.
1. Let my stereo connect to both hands free and wireless headphone services.
2. Open bluetooth settings
3. Manually connect to my Jawbone.
It works great.
Click to expand...
Click to collapse
Thanks for the reply. I'll give that a shot. I'm not sure that my Pioneer stereo will automatically connect both handsfree and A2DP. I know it will do handsfree automatically. We'll see...
-Chris

[Q] Audio to non A2DP headset

Hi,
I'm wondering if there is any way to stream audio music and/or FM radio from Windows Phone 7 (I have the HTC HD7) to a non A2DP Bluetooth headset (I have the Jabra EasyGO).
It seems that I can only make and receive calls with it.
I've searched all over the place (and web) and cannot find a way to do that.
The only way is to get a new Bluetooth headset with A2DP capability?
Is there is a workaround, please let me know.
Thanks.

I don't know of one. As far as I know, the Headset profile is mono-channel only (plus another channel for the mic) anyhow, and probably quite low bandwidth, so it would likely sound awful.

Thanks for your answer GoodDayToDie.
But I don't mind for quality... Actually I'm not interested to listen for audio.
I just want, for example, to hear drive directions when I'm driving using navigation software (Navigon) instead of hearing from the loudspeaker.

Hmm... I thought the phone *would* use Headset profile for driving directions. Weird. I find the WP7 implementation to be so bad that I prefer to keep using a 4-year-old Garmin Nuvi instead, but I could have sworn I tested it and it came over the BT (and my car only has Headset, not A2DP). Maybe poke around in Settings?
Alternatively, if your car has Aux In, you could use a ripping cable (double-ended headphone cord, they're very cheap) and then the phone will play instructions over the cable into the car's stereo. This is also a great way to use the phone's music player, including Zune Pass if you have it, to play music in the car (I do this all the time). It uses less battery than having Bluetooth transmitting constantly would anyhow.

[Q] A bluetooth work-around needed?

Hello everyone,
I have a specific problem with a bluetooth device and with my limited knowledge I haven't worked out how to fix it, so I am asking for your help. I will explain it best I can...
I have a third-party bluetooth stereo in my car that has a built in mic for voice calls. However, the microphone is of terrible quality and as it's in the stereo unit it's quite far from me when I'm driving meaning it is almost useless to use for voice calls. Because of this I purchased a seperate good quality bluetooth speaker/mic that fits on to the car's sun visor. The problem I have is when I get in to my car my phone connects to the stereo only and not the small speaker. I want my phone to connect to the stereo via b/t so I can play my music through it, which is great, but not for voice calls. I see in the b/t options on my phone (HTC One) that you can check/uncheck boxes for the type of connections, in this case 'Phone Audio' and 'Media Audio'. If I just have the Media Audio setting checked, the phone fails to connect to the stereo at all, not even for music, so in order for it to automatically connect to the stereo I need the Phone Audio option enabled too, causing it to then not connect to the seperate device, thus diverting all calls through the stereo, which is really inconvenient. There are no options within the stereo that isolates these individual settings.
Are there any apps or methods you can advise me on that will allow my phone to connect to the stereo automatically but with voice disabled? I have looked in to Tasker but I am not skilled enough to work out how to set it up, so if this is the best option can somebody talk me through this please?
I appreciate the help on this, and I hope I've explained it adequately.
Simon

Question bluetooth & notifications through phone only

Hello
When I have my bluetooth ear buds connected, I only want audio/calls coming through.
I don't want notification sounds (like a new email or chat message) coming through the ear buds.
Any way to do this?
I use Bixby routines as well, so if the solution is through routines, I can.
Thanks.

What about Separate app sound in Settings and set these apps to have notifications only on the phone, not in the Bluetooth ear buds?

Monipeev said:
What about Separate app sound in Settings and set these apps to have notifications only on the phone, not in the Bluetooth ear buds?
Click to expand...
Click to collapse
sort of would work but not really
for example, I don't want to hear incoming notifications for whats app
but if I select whats app to play through phone only, then I cannot hear voice messages or videos received in whats app

In Goodlock's Sound Assistant, the reverse option is there. Play alerts through headphones only.
I want the opposite.

I've been wanting this feature for ages, but for a different reason.
Every time I'm in my car, or other vehicle, my phone connects over Bluetooth and I hear NO notifications, unless the car head unit is streaming using the Bluetooth.
So if I'm just listening to radio, the notification audio seems to be sent over Bluetooth and doesn't come out anywhere.
There really should be a notification manager that sets the rules or something.

Gasman said:
I've been wanting this feature for ages, but for a different reason.
Every time I'm in my car, or other vehicle, my phone connects over Bluetooth and I hear NO notifications, unless the car head unit is streaming using the Bluetooth.
So if I'm just listening to radio, the notification audio seems to be sent over Bluetooth and doesn't come out anywhere.
There really should be a notification manager that sets the rules or something.
Click to expand...
Click to collapse
yep
same issue more or less
When connected to bluetooth and Android 13/One UI 5, I can control output of sound between phone or bluetooth but thats with apps (like whats app, youtube, chrome, reddit, etc etc).