Related
i originally had faria's wm6 on my phone, but then i wanted to try xplore core 2.0. i flashed it, but when it finished it would start. it wouldnt go past the second splash screen. i tried a hard reset using the hard keys, but when i try it, it says format failed. i have tried to reflash using bootloader using the OEM carrier roms from both t-mobile and cingular. i am having the same issue no matter what i do. if there is anything i can do to fix this.. please help me because i constantly use my wizard and i don't no what i can do without it. i really appreciate any input. thanks
im not sure what to do but i figured i'd respond just so you know people are trying to help. I've heard of the format failed problem, but im not sure what the solution was. Good luck!
What device do you have ? A G3 ?
How I fixed my Format failed problem...
This is a quote from thread
http://forum.xda-developers.com/showthread.php?t=276963&highlight=splash+screen+freezing
I followed these steps with an SD card fresh from the package...
Drug_Store said:
...
2- Get a clean SD card (in qtek 9100 / Htc Wizard case is MiniSD) with 128MB (some people say 64MB, but I personally used a 128MB, maybe a 64MB is enough)
3- Kill (task manager) wescomm.exe (this is related with activesync installed on your PC). Insert the blank SD card on the phone.
4- Get your phone in bootloader mode. Like this : Phone powered off, press Camera button + Power On, will enter in bootloader mode (RGB screen).
5- Now connect your USB cable to your phone. And start MTTY_updateROM.exe (http://wiki.xda-developers.com/uploads/romupdate.rar). After open, on Port selection, choose \\.\WCEUSBSH001 and press OK. A window will open with a blank sheet.
6- Type "r2sd all" and hit enter... wait to the end (at end shows "cmd>"). On your phone screen u can follow backup progress... small bar will appear down the RGB screen.
7- Power off the phone (or remove battery), enter bootloader mode (camera button + power on) and this time RGB won´t appear right away. Will ask if u want to "download SD image", press voice dial button to agree, and writting will begin. Wait to the end. Power off and power on normally. Now your phone should be working ok. Not even needed to reflash the phone after this.
Thanks to all and hope this helps more people with this problem
Click to expand...
Click to collapse
thanks guys... im going to try that.. and just so all of you know, its a g3
thanks everyone who helped me out. my wizard is working perfectly again. i appreciate all the help
wow that's awsome
idd, mtty is last chance weapon.
woah...
Guess I'll post this...
For the record, the Core 2.0 rom ****ED my phone up too. When I tired to flash back a different rom because of all the changed **** in Core 2.0 my phone flipped out. I had to flash it 3 or 4 times to get it to even boot.
I recommend anyone thinking of tyring Core 2.0 to stay away from it unless they don't plan on changing roms after going to it.
GldRush98 said:
woah...
Guess I'll post this...
For the record, the Core 2.0 rom ****ED my phone up too. When I tired to flash back a different rom because of all the changed **** in Core 2.0 my phone flipped out. I had to flash it 3 or 4 times to get it to even boot.
I recommend anyone thinking of tyring Core 2.0 to stay away from it unless they don't plan on changing roms after going to it.
Click to expand...
Click to collapse
yes, i edited it.
I believe operator error isnt something to blame on the rom. Anyone that openly drops the "F" bomb when discussing a cell phone really should get a life.
GldRush98 said:
woah...
Guess I'll post this...
For the record, the Core 2.0 rom ****ED my phone up too. When I tired to flash back a different rom because of all the changed **** in Core 2.0 my phone flipped out. I had to flash it 3 or 4 times to get it to even boot.
I recommend anyone thinking of tyring Core 2.0 to stay away from it unless they don't plan on changing roms after going to it.
Click to expand...
Click to collapse
anichillus said:
You are an asshole, pardon my language. My rom doesn't **** systems up, mabe you just don't know what you are doing.
I won't release any more roms. I am just tired of all this SH**. I stay calm and watch people who only know how to complain and don't give a F*** about all the work that's put up just for free, but this does it. I am giving up.
I can't afford to brick my Wizard for people like you who are simply here as ignorant sharks.
Click to expand...
Click to collapse
You sound like Faria...LOL!
Really, that's why I put what I did in my thread about saying "My phone is stuck in bootloader..." (remember the fillet knife?) ROM's DO NOT MESS UP A PHONE UNLESS THEY ARE CID LOCKED, THE FLASHING PC HAS ISSUES, OR BECAUSE OF OTHER OPERATOR ERRORS.
Don't let it get you down. You're doing a good work and if one or two people out of a thousand can't get it right, then they need to be running carrier ROMs, and you can stay calm and happy helping those who really need it.
See, that's not so bad now is it?
GldRush98 said:
woah...
Guess I'll post this...
For the record, the Core 2.0 rom ****ED my phone up too. When I tired to flash back a different rom because of all the changed **** in Core 2.0 my phone flipped out. I had to flash it 3 or 4 times to get it to even boot.
I recommend anyone thinking of tyring Core 2.0 to stay away from it unless they don't plan on changing roms after going to it.
Click to expand...
Click to collapse
i went form core 2.0 back to the tmobile rom and then to the core 2.0n and it worked fine. did you lose connection during the flash or somthing?
anichillus said:
You are an asshole, pardon my language. My rom doesn't **** systems up, mabe you just don't know what you are doing.
I won't release any more roms. I am just tired of all this SH**. I stay calm and watch people who only know how to complain and don't give a F*** about all the work that's put up just for free, but this does it. I am giving up.
I can't afford to brick my Wizard for people like you who are simply here as ignorant sharks.
Click to expand...
Click to collapse
Boy, I know more about what I'm doing then most people here put together.
Your rom ****ed my phone right in the ass.
Luckily I recovered from it.
You call your Rom "stock" yet YOU CHANGED ALL KINDS OF STUPID STUFF IN IT.
Like the alignment screen graphic?
Why the hell would you do that.
Or putting on 3 different boot screens. wtf?
Oh yeah, not to mention it runs like **** before even loading any more software on it since you used the OLD WM6 build.
Don't release any more.
You're terrible at it.
kthx bye.
jawnsixteen said:
i went form core 2.0 back to the tmobile rom and then to the core 2.0n and it worked fine. did you lose connection during the flash or somthing?
Click to expand...
Click to collapse
Nope, flash went to 100% then the phone tried to reboot and nothing happened.
I do all my flashing on that machine because it's stable and I have never had a problem flashing until the Core 2.0 rom. That is the first and only rom I have had any trouble with.
golfernutnflorida said:
I believe operator error isnt something to blame on the rom. Anyone that openly drops the "F" bomb when discussing a cell phone really should get a life.
Click to expand...
Click to collapse
OMG, he used a naughty word.
Like you don't hear it daily?
Get real.
GldRush98 said:
Boy, I know more about what I'm doing then most people here put together.
Your rom ****ed my phone right in the ass.
Luckily I recovered from it.
You call your Rom "stock" yet YOU CHANGED ALL KINDS OF STUPID STUFF IN IT.
Like the alignment screen graphic?
Why the hell would you do that.
Or putting on 3 different boot screens. wtf?
Oh yeah, not to mention it runs like **** before even loading any more software on it since you used the OLD WM6 build.
Don't release any more.
You're terrible at it.
kthx bye.
Click to expand...
Click to collapse
I do my rom as I please, you can't question that.
For YOU to know all roms have 3 (boot =NOT) splash screens You're just too SMARTass to notice.
You can quote multiple post in same message, in case that slipped your soo full-of-knowledge mind.
I used old WM6 build ? Please explain to me what you mean ...i am not that wize
I did not called my rom STOCK ! I called it Core . But you are probably too smart to actually even read anything.
In case you don't understand the word "CUSTOM", then let me explain it to you : I can change whatever i want in it. All of it if I like to.
Ah yeah, and i almoust forgot ... please read this
http://forum.xda-developers.com/showpost.php?p=1241040&postcount=1
It's been there from day 1, just made it bigger now, so that you can see too
And next time, keep your opinions to yourself. No need for public -> "Ooh, look at me how tough I am ! " stunts.
....
whether you like it or not...
I'm confused by people who choose to post cooked ROMs in a public forum, invite people to use and comment, but them complain if the feedback it not all roses and accolades.
You may have done this for free, and many if not most, appreciate your time and effort. That being said, some have legitimate complaints and are posting them because they have experienced problems with your ROM. I’ve been reading your reaction to any negative feedback and you are highly defensive, never conceding that there may be issues to address.
All cooks say that you are not responsible if the ROM bricks someone’s device or if they have problems, and no one has asked for you to pay for their repairs or replace their devices.
There is no place for foul language or insults in such a forum. It's childish and may simply help support the complainant’s point.
If this is your reaction to complaints, then yes do us all a favor and stop posting and keep your work for your personal enjoyment and benefit.
If you can't stand the heat, then get out of the kitchen. No pun intended.
Well if it doesn't work for you then try a different ROM. I tried all the ROMs and pretty much gonna stay with Faria The Real Thing
I tried Xplore 1.0 and i had alot of troube so I dont think im gonna try 2.0. If it works dont change
Funny thing is I have flashed this ROM to my wizard 6 times, and each time something else didn't work. But let me explain...
I want a stripped version of windows, I don't do any messaging at all. And since the Explorer ROMS are known for their stability, it seemed a logical choice. So I have been using package tools, to create packages with option.XML files for each package so you can choose, what parts of the OS get installed.
But back to the point...
Each time I flashed something went wrong... Something I did, a "tmail not found warning when activesync starts", to once I got a 260(?) error once when flashing at 63% so I started it while holding the voice command button. It booted into Bootloader, I flashed it to Cingular 2.25.11 and immediately flashed back to the same ROM successfully.
There are hundreds of people Ecstatic with the Xplorer ROMs, for each one of you here complaining. I for one would think it a travesty, for a few unappreciative people to ruin it for hundreds of others. By pissing off one of our cookers. Maybe had you posted your problems here we would have been able to help you.
But please don't be so accusing, just read, and if you can't find an answer. Then ask nicely, and thank the cook for the time he spends cooking for us! If you don't like the answer you get or you decide you don't like this ROM try one of the many others...
Hello, I have an Axim X51v that I bought off someone who didn't want to deal with it anymore. Anyway when you turn it on it hangs at the dell logo or sometimes at the windows start up logo, rarely it makes it into windows but it freezes up after a little while. I've tried flashing several different roms on it (so did the previous owner) but each time it's the same result. I've checked diagnostics mode (record+power+reset) and everything seems to check out (flash has a green zero) and every time I flash a rom it makes it through without any problems. Also the bootloader is a10_g3 is this version known to be unstable? Could it be flashed wrong? That's the only thing I can really think of.
You know this forum is for HTC devices?
Im not familiar with Dell PDA's but i cant imagine flashing roms willy nilly will work on a dell which are designed for HTC devices. Give me a link for the ROM which you are currently trying to use.
Have you tried flashing original rom back on, thats wm5 yes?
Yeah I know it's for htc devices (this is where I get roms for my kaiser). But I've also seen roms for the x51 here too and I assumed someone may know something about em here. Anyway I have the "stock" wm5 rom flashed right now (flashed with sdloader) and it's pretty much in the same shape.
We don't frown upon answering questions for other devices. This forum is meant to help people. If you can get your answer here.. cheers on that.. hope you will.
mbannick said:
Yeah I know it's for htc devices (this is where I get roms for my kaiser). But I've also seen roms for the x51 here too and I assumed someone may know something about em here. Anyway I have the "stock" wm5 rom flashed right now (flashed with sdloader) and it's pretty much in the same shape.
Click to expand...
Click to collapse
sorry wasnt meaning to sound sarcastic, ive had some experience of axim but mostly wm5, just wasnt too clear on ur issues, what exactly happens? you say it freezes but what do you do that makes it so?
Well that's the thing it freezes randomly, even just sitting there it will freeze. I want to say its the flash but every time I check it the test comes out clear. So the the only thing I can think of is the bootloader is messed up.
Ive just been to the dell support site and wow, alot of un happy people, i can see why your friend didnt want it anymore...
After doing some reading there i can only suggest you download their official rom and rom updates and see if you can get it running normally. What i dont understand is flashing a new rom should clear everything, i dont think it is the bootloader if the system boots up fully correctly, it has to be a rom issue (or hardware of course).
check out these sites, doesnt make good reading im afraid :
http://search.euro.dell.com/results...~srd=False&ipsys=False&advsrch=False&~ck=anav
http://en.community.dell.com/forums/3530.aspx?PageIndex=2
good luck and let me know how you get on.
Well as I said it takes several tries to get into windows (sometimes it wont work at all until I leave it without the battery for an hour or so) so its not booting up normally at all . Anyway I had the wm5 a12 rom on there for a while but it still has the same problems (I used sd flash since I really cant sync and flash with the way it freezes). So yeah I'm not sure what I can do
mmm.....
If youve had several different roms on it, including official ones, it could mean a hardware problem too.......
Im no chef, but i would have expected a bootloader issue to be resolved with a known working official rom?
How old is the Dell? Just a thought, have you tried the online help with a technical rep from Dell, they were good when trying to sort out an issue with my 4 year old laptop? Sorry but im running out of ideas........
Hey I think I got it! Seems the previous owner modified the battery latch. After messing around a bit I stuck a toothpick on the "button" that is depressed when the door is closed and it seems to be running perfectly stable! I even did a few resets and each time it boots just fine. Thanks to everyone who replied and offered advice.
hoorah! saved by a tooth pick, now ive heard it all haha. congrats!
I created a GTX boot splash and decided to share it in the ✰✰✰✰ Everything GTX ✰✰✰✰ thread. Since it was made for the HD2 I thought I would reference it here. The direct post is HERE
I will take any requests for boot splash screens GTX style or not if you upload a 480 x 800 image for me I will create the NBH.
take it theres nobody interested in a custom boot splash screen?
I'm fine thanks, but on a completely unrelated question... What was ****e about the k750i? I kinda loved Sony Ericssons back then, and I used that phone a lot. On days when my HD2 annoys me, I sometimes think back to it
smeddy said:
I'm fine thanks, but on a completely unrelated question... What was ****e about the k750i? I kinda loved Sony Ericssons back then, and I used that phone a lot. On days when my HD2 annoys me, I sometimes think back to it
Click to expand...
Click to collapse
It was ok at first like most SEs but then the problems. The d-pad stick became really un responsive, I had to really mash it to get it to select a word while texting. One day the keypad seemed to completely 're-wire' itself as in my phone crashed one day and when I went to type in my PIN code random things like 1 went to the right and 6 deleted backwords in other words it ended up blocking my SIM card. Then after I got my PUK code started working again. Then few weeks later it died completely. Im not having SEs ever again. My wife had a w810i that randomly died. When I learnt about flashing etc I managed t fix her c902 when it randomly lost its entire file structure. Have had t do the same to a friends c902 and again for someones c905. I find they just seem to destroy themselves in general SEs.
By far the best phone (or at least my fondest memories) are of the Nokia 7610. Amazing phone and it had multi tasking which i really missed with the SE. Rant over
Haha thanks for the reply, wow that sounds like a bad build of phone. I found mine (I went through about four of that generation) got battered after about a year but generally held up, and I lovd their music players and cameras, although not much else However they were still my favourite type of phones until the HD/HD2 came out - I'm still not a giant fan of typing on touchscreens, although I think that's down to the HD2's particularly awful out-of-the-box texting client. (I can't stand iPhones, but if I touch one I always open the keyboard and find I can rattle along with no problems)
I'm interested in an alternative boot screen... however haven't a clue what I want as yet lol
nutmegy said:
I'm interested in an alternative boot screen... however haven't a clue what I want as yet lol
Click to expand...
Click to collapse
Well let me know when you decide. U sound like my wife not knowing what ya want LOL
Im looking for a new slash screen...so intrested in this.
Keep it plain and simple!
Maybe remove the GTX (but keep the styling?)
fracmo2000 said:
Im looking for a new slash screen...so intrested in this.
Keep it plain and simple!
Maybe remove the GTX (but keep the styling?)
Click to expand...
Click to collapse
I'm not the worlds best with a graphics editor but i will try. i was mainly just going to convert existing images into nbh's. However what are you after? the same as the one i have done without the GTX logo? what colours do you want background and text. if you have an image already post it here and i can convert it.
Hey all,
I'm getting my G Tablet tomorrow and I'd just like to get some things clarified.
I know, the first thing some will say is USE SEARCH! Well, I did - and that's actually why I just want to get some things straight before I go down the path of modifying the device software. See, reading it all has managed to confuse me more than help me get a definitive instruction set for forging ahead.
I'm seeing the update "****s on CWM" according to a user...and then a 'fix' for that. Than I see that Gapps causes FCs for some, while it works for others. So...yeah, a little back and forth on what to do and who's instructions to follow.
Alright, so first thing's first....Should I flash the Clockwork Mod that I'm seeing available - 0.8? or is there something else I should consider or that I've missed? or maybe wait for a newer version? Should I even flash CWM if I get the newest (and I WILL be getting the newest) S/W version? Are there any downsides at all to flashing CWM on there in terms of messing with OTA updates, etc?
I read this:
"All the ROMS use a standard firmware updater that can be used by non-technical users. Here is an explanation on how it works:...."
Sooo, does that mean I can live without CWM? If an update doesn't work for some reason, will I be able to fix it or overwrite it somehow if I can't get into the tablet at all from the tablet itself? I read something about going into APX mode and putting things on through Windows, is this an infallible method?
Second of all, I read the FAQ thoroughly (I think and hope) but I'm still not 100% on what Gapps to DL or how to put a working Android Market on there especially with this new S/W update. I've seen how to 'fix' the Market to see missing apps, but not how to actually install it on the G Tablet. I may have missed that post somewhere on here.
I'm also unclear if I should get Gapps or not at all, as I've read that some have FCs on there while others do not - so what's the general consensus in light of this update that was just released as of Dec. 21, 2010?
Ultimately, here is what I'd like from my GTab:
I'd like to run the new official Tapn'Tap released recently first and foremost.
I'd like to have the official/unofficial (w/e) Google Market.
I'd like to run Google Apps (Gtalk, Gmail, etc.).
IF I don't like Tapn'Tap, and this is a worse case scenario situation, as in if I HATE TnT - I'd like to have the option to slap something else on there and I'd like to make sure I don't brick my Tablet. Whether that means storing an original official TnT ROM or whatever.
Point me in the right direction please, especially considering things may have changed as of the new S/W update.
Thanks much and sorry for all the questions. I assure you I used search and I attempted to put it together on my own. It's been a long time since I've modded (G1 was the last time) and I don't do it often. Also, apologies if I posted this in the wrong section....I considered posting it in Dev. section but this one seemed better suited.
Thanks again, XDA rocks.
Neoprimal said:
Hey all,
I'm getting my G Tablet tomorrow and I'd just like to get some things clarified.
I know, the first thing some will say is USE SEARCH! Well, I did - and that's actually why I just want to get some things straight before I go down the path of modifying the device software. See, reading it all has managed to confuse me more than help me get a definitive instruction set for forging ahead.
I'm seeing the update "****s on CWM" according to a user...and then a 'fix' for that. Than I see that Gapps causes FCs for some, while it works for others. So...yeah, a little back and forth on what to do and who's instructions to follow.
Alright, so first thing's first....Should I flash the Clockwork Mod that I'm seeing available - 0.8? or is there something else I should consider or that I've missed? or maybe wait for a newer version? Should I even flash CWM if I get the newest (and I WILL be getting the newest) S/W version? Are there any downsides at all to flashing CWM on there in terms of messing with OTA updates, etc?
I read this:
"All the ROMS use a standard firmware updater that can be used by non-technical users. Here is an explanation on how it works:...."
Sooo, does that mean I can live without CWM? If an update doesn't work for some reason, will I be able to fix it or overwrite it somehow if I can't get into the tablet at all from the tablet itself? I read something about going into APX mode and putting things on through Windows, is this an infallible method?
Second of all, I read the FAQ thoroughly (I think and hope) but I'm still not 100% on what Gapps to DL or how to put a working Android Market on there especially with this new S/W update. I've seen how to 'fix' the Market to see missing apps, but not how to actually install it on the G Tablet. I may have missed that post somewhere on here.
I'm also unclear if I should get Gapps or not at all, as I've read that some have FCs on there while others do not - so what's the general consensus in light of this update that was just released as of Dec. 21, 2010?
Ultimately, here is what I'd like from my GTab:
I'd like to run the new official Tapn'Tap released recently first and foremost.
I'd like to have the official/unofficial (w/e) Google Market.
I'd like to run Google Apps (Gtalk, Gmail, etc.).
IF I don't like Tapn'Tap, and this is a worse case scenario situation, as in if I HATE TnT - I'd like to have the option to slap something else on there and I'd like to make sure I don't brick my Tablet. Whether that means storing an original official TnT ROM or whatever.
Point me in the right direction please, especially considering things may have changed as of the new S/W update.
Thanks much and sorry for all the questions. I assure you I used search and I attempted to put it together on my own. It's been a long time since I've modded (G1 was the last time) and I don't do it often. Also, apologies if I posted this in the wrong section....I considered posting it in Dev. section but this one seemed better suited.
Thanks again, XDA rocks.
Click to expand...
Click to collapse
I don't know how much direction pointing I can do but here goes..
Clockwork mod in my opinion is a necessity. Version 0.8 is the best one for most people because of how it deals with the memory locations. Yes, you can do things without it. The update process is as simple as putting an update.zip file, and a recovery folder with a command file in it on an sdcard and holding the vol + button while hitting power. It is easy. Clockwork has a lot of little features though that make life easier. You can make a complete system backup with it. You can install updates, and new firmware with it. You can completely lock up your tablet and using clockwork and your backup be back in business in about 3-4 minutes. You can load new roms and if you hate them you can go back to your old working stuff in minutes. Yes, there are ways to make one of these tablets work again when they get stuck. I don't think anyone has actually bricked one. Some may think they have, but I doubt it.
Unless you are dead set on wanting the stock TnT interface the easiest way to get what you want is to load one of the roms. Yes, there are ways to get most of it without loading a new rom. Most everyone that has gone the I have to stay stock but want all the mods has eventually just loaded a rom. TnT3.0 is based on the latest stock stuff. It has the market, flash, etc. already in it. VegaN is what I use mostly but they are both stable and fast.
Before you flash something brand new that just came out I would read about it and see what others have to say about issues. It usually only takes about 30 minutes until you can tell if it is going to be good or not.
All of the roms for this tablet have there own little quirks. The stock has gotten better with each update but it still is not as good as the ones I named.
Finally.. This tablet is very easy to play with. It is pretty much unbrickable. Anything you can possibly break one of us has probably already broken before and fixed. There are some people that seem to have problems doing every little thing. Most don't. So I wouldn't let any of it scare you off because none of it is that hard.
With a little bit of searching almost everything you may want it to do can be done. I really love mine, and when I got it almost 2 months ago I hated it...
"Finally.. This tablet is very easy to play with. It is pretty much unbrickable. Anything you can possibly break one of us has probably already broken before and fixed. There are some people that seem to have problems doing every little thing. Most don't. So I wouldn't let any of it scare you off because none of it is that hard."
"Sigh" of relief. Then I'm not too worried. As I said I've dabbled in modifying my G1 and it is mostly cake. But I've just been seeing conflicting posts on whether cwm works with the newest official tnt release or not so I wasn't sure what to do.
Thanks for your advice. And when I said pointers, I meant like this as well as pointing me to any posts I may have missed on how to do whatever. Though I THINK I found most of them.
Neoprimal said:
"Finally.. This tablet is very easy to play with. It is pretty much unbrickable. Anything you can possibly break one of us has probably already broken before and fixed. There are some people that seem to have problems doing every little thing. Most don't. So I wouldn't let any of it scare you off because none of it is that hard."
"Sigh" of relief. Then I'm not too worried. As I said I've dabbled in modifying my G1 and it is mostly cake. But I've just been seeing conflicting posts on whether cwm works with the newest official tnt release or not so I wasn't sure what to do.
Thanks for your advice. And when I said pointers, I meant like this as well as pointing me to any posts I may have missed on how to do whatever. Though I THINK I found most of them.
Click to expand...
Click to collapse
The new release overwrites clockwork. But it is not hard to put back. Always a good idea to copy the clockwork backups folder to your pc, or somewhere they won't be lost. The custom roms typically leave the recovery image alone and can be installed with or without clockwork by either extracting the zip contents for stock recovery, or installing it as is in clockwork.
Sprdtyf350 said:
Finally.. This tablet is very easy to play with. It is pretty much unbrickable.
Click to expand...
Click to collapse
I can vouch for that. Erased system, boot, data and cache in preparation for a new ROM. Accidentally rebooted and couldn't get into recovery. Booted it into APX mode, flashed stock and was on my way.
I would just run ZRoot, then upload the TnTLite 3.0 recovery and update.zip and then do the recovery mode process. You should have a microsd handy just in case it doesn't work, but so far I haven't needed that.
This tablet is much easier to work with and very forgiving since VS never took the time to lock down the bootloader etc like Motorola did with my Droid X. You really shouldn't fear changing files out etc, provided you're getting a ROM from one of the people providing them here. If you can press and hold two buttons at once, you can make your gTab an awesome little tablet. It benchmarks about 1000 points higher than my Droid X on quadrant. Can't wait to see what these guys can do with Gingerbread.
Sprdtyf350 said:
The new release overwrites clockwork. But it is not hard to put back. Always a good idea to copy the clockwork backups folder to your pc, or somewhere they won't be lost. The custom roms typically leave the recovery image alone and can be installed with or without clockwork by either extracting the zip contents for stock recovery, or installing it as is in clockwork.
Click to expand...
Click to collapse
It is also not hard to alter the update so that it does not overwrite clockwork.
Open update.zip
Find updater-script, Open in notepad++
Remove the line that references recovery.img
Flash update
hogasswild said:
I would just run ZRoot, then upload the TnTLite 3.0 recovery and update.zip and then do the recovery mode process. You should have a microsd handy just in case it doesn't work, but so far I haven't needed that.
This tablet is much easier to work with and very forgiving since VS never took the time to lock down the bootloader etc like Motorola did with my Droid X. You really shouldn't fear changing files out etc, provided you're getting a ROM from one of the people providing them here. If you can press and hold two buttons at once, you can make your gTab an awesome little tablet. It benchmarks about 1000 points higher than my Droid X on quadrant. Can't wait to see what these guys can do with Gingerbread.
Click to expand...
Click to collapse
with the new update however does the z4root still work? i heard it may not anymore. just curious also since im hopefully getting mine on sat for xmas
rothnic said:
It is also not hard to alter the update so that it does not overwrite clockwork.
Open update.zip
Find updater-script, Open in notepad++
Remove the line that references recovery.img
Flash update
Click to expand...
Click to collapse
Thanks for the info Rothnic! I had already flashed it before I figured out it removed Clockwork. Learning new stuff every day is good... Thanks..
dragonfly1113 said:
with the new update however does the z4root still work? i heard it may not anymore. just curious also since im hopefully getting mine on sat for xmas
Click to expand...
Click to collapse
The very first time I rooted, I used ZRoot and installed 2.4.0. I didn't change anything and used the exact same process of simply copying over the 3.0.0 files over to the root directory of the internal memory and did the recovery procedure (vol+ and pwr keys). It worked like a charm.
hogasswild said:
The very first time I rooted, I used ZRoot and installed 2.4.0. I didn't change anything and used the exact same process of simply copying over the 3.0.0 files over to the root directory of the internal memory and did the recovery procedure (vol+ and pwr keys). It worked like a charm.
Click to expand...
Click to collapse
Ok cool, thanks cant wait for my g tablet hopefully sat morning
I think you'll like it a lot. I also own an iPad. While they are similar they are also a little different. Merry Christmas!
hogasswild said:
I think you'll like it a lot. I also own an iPad. While they are similar they are also a little different. Merry Christmas!
Click to expand...
Click to collapse
my mom has an ipad and my dad could only buy it while i was on my honeymoon bc he knew i wouldnt approve of an apple device in the house haha.
rothnic said:
It is also not hard to alter the update so that it does not overwrite clockwork.
Open update.zip
Find updater-script, Open in notepad++
Remove the line that references recovery.img
Flash update
Click to expand...
Click to collapse
My device hasn't come yet (damn you FedEx!) but I'm eagerly awaiting it.
My plan:
Unbox, start it....do a factory reset from the getgo if it has enough juice.
Set it back up. Charge it to full. If whatever comes on it is as unbearable as I've seen in on Youtube - start modifications.
Will CWM install on it AFTER I do the update if it's available to me? I've seen that the update messes with it if it's already there - but noone's mentioned putting it on there after the fact. I may just go that route for simplicity sake.
Thanks for this!, and thank you all for chiming in with your experience. I feel much better about just getting my hands dirty in it all. I had wrote something to someone yesterday about jumping in and just doing it, but when it comes to dealing with it yourself it can be a daunting task - especially when it still has that new smell, lol. Anyway, thanks again. You guys really rock.
Will stop back later on after I've done my thing
I think they are both nice devices. There are trade off for both of them. I think the screen on the iPad is wonderful, where the gTab's is okay. But the gTab has a forward facing camera, you can print from it, and you can modify it fairly easily too.
Sprdtyf350 said:
Finally.. This tablet is very easy to play with. It is pretty much unbrickable.
Click to expand...
Click to collapse
...famous last words...
Seriously though...trust the directions from the great devs like roebeet. Follow their instructions word for word. You can switch ROMs and then flash back if you want. No worries...
Off topic!
Well...disappointment! Fedex had my package out for delivery at 8am and at 8pm, they're not here. This is why I like UPS, they show up at my door on the day of delivery, no exceptions - they have shown up at almost 9pm before. The Archos 101 I got was sent out at 8am as well but got here at 1:30pm - I suppose that was before the holiday rush.
Checking the details of my tracking I'm seeing a "delivery exception" at 7:30pm (I guess it was time to get back to the facility so they can clock out by 8pm?) and upon calling them I get a somewhat stumbling but polite CS who tells me the delivery went out "late" - upon which I asked if 8am was considered late, especially from a distribution facility WITHIN the same zip code as I am, and all he could say was "Very sorry about this".
Aaaanyway....I guess it will be tomorrow before I can report my adventures.
Think I'll be able to get my $3.99 back from Amazon? I have Prime and with that the package would have come tomorrow anyway. Basically my $3.99 is wasted. Imagine if I didn't have Prime though? Whew.
ima_UNC_fan said:
...famous last words...
Click to expand...
Click to collapse
If you can figure out how to brick it you will probably get an award.. It won't be a good award but probably one of those top ten dumb things people do awards. So far unless you plug the motherboard into a wall socket no one has bricked one. May think they have, but like I said before I doubt it..
And your right.. If it can be done, someone eventually will figure out how. And then we will all laugh at them.. At least I will
I finally got the G tablet tonight and...alright, don't flame me for this - but I don't see what all the complaints about the screen being horrendous or the device being molasses slow are about?
I don't know how people are trying to view it...but when looking at it or setting it on a stand to watch media, I'm not seeing any problem with the viewing angles. It's about the same as my laptop so I watch it the same way.
It's not even a 1/4 as slow as the stuff I've seen on Youtube or in some of the review videos I've seen around the net. I haven't gotten a single FC. Granted, I haven't put in a SD Card yet so maybe problems will start then?
I guess I should note, the very first thing I did was did a factory reset. Then I hooked it up to Wifi and got the 3053 update. I'm one of those who will be waiting for the 'official' update on the 24th.
I set up the time and date, restarted and everything works. I haven't installed flash yet (don't need it that much) and stuff that I DO want on there right now works fine (skype, pandora, fring, dropbox, evernote). I'm slowly figuring out a list of what I want/need from my Mytouch 4G to port to the VS GTab. Figure I don't really NEED Gtalk, Gmail on there because I have these on my phone AND PC - do I really want them making noises all around my home on 3 devices? I was concerned about getting the Google Apps on but now I'm finding I really don't need them. So it seems to me this will be a matter of learning to separate what I need on a tablet vs. my phone - I was of the mentality that I should just get whatever's on my phone on the tablet, this is something others apparently do as they seem to want everything that's on their phone, on their tablets as well.
I personally don't see the point in that. Had I had the Google Market, that would have escaped me as I'd have used Appbrain to just get my motherload of apps from the MT4G to the GTab. Not having it has slowed me, and now I get to re-evaluate before I do grab apps for it.
Now I just have to merge/convert my HTPC into a NAS device as well and find an app that will allow me to DLNA stream media from it and I'll be in mobile heaven.
I haven't had my wifi drop at all anywhere in my home and I've marched all over with it (I use full Wifi N, no G compat. so maybe my range is wider?). Tried email, etc. to replicate crashes and force closes but haven't so far. No surfing issues. I DID find that one app got 'stuck' being downloaded and I had to delete the file before the 'downloading' icon would go away, even after restart.
Maybe the trick to getting a workable GTab in the first place is to factory reset it before first use? Iunno. Things may change and issues may pop up the more I use it and as time passes - but so far, so good!
Again, I can't thank XDA enough for the advice and info. I've found and been given.
Sprdtyf350 said:
If you can figure out how to brick it you will probably get an award.. It won't be a good award but probably one of those top ten dumb things people do awards. So far unless you plug the motherboard into a wall socket no one has bricked one. May think they have, but like I said before I doubt it..
And your right.. If it can be done, someone eventually will figure out how. And then we will all laugh at them.. At least I will
Click to expand...
Click to collapse
I figured it out. Accidentally hit one of the devkit nvflash .cabs and boom
I was wondering if anyone had any info on the status of roms for the Behold II. I just got one, used but in very good shape, and I am trying to get it to work better. I am fairly sure these phones were pretty popular, and I can't believe they were (almost) completely ignored. I found a pretty nice clean android 1.6 rom that I threw on it, but it has no vibrate.
Does anyone know of any stable gingerbread roms for this phone? If not, anyone know how to get vibration to work? Is there anyone out there willing to work on this phone at all?
Or can anyone point me in the direction of some information on taking the rom apart and figuring out how to get the vibration working? Basically I need to find out how to take apart a rom, then figure out how to get vibration working properly. It's driving me nuts that the phone doesn't vibrate when I get calls/texts.
Isn't that Donut? *throws up*
Couldn't find any ROMs above 1.6 with some googling. Its also likely that you would not be able to fix the vibrate issue, if the Dev couldn't. If you want to "take the ROM apart," just take the .zip file and unzip it.
But I recommend getting a new phone.
Sent from my Nexus 4 using xda premium
It is indeed Donut. That's why I wanted to try and find a gingerbread rom or figure out how to make my own.
I unzipped the rom and dug around in there. I found some other thread on these forums about vibration and the symlinks and vibrate.ko. I checked in init.rc (on the phone) and found some lines about inserting modules relating to VibeTonez and the module "vtmdrv.ko" but I don't know if it is commented properly or turned on or symlinked or whatever. I see nothing about an actual vibrate.ko or anything.
How do I check my updater-script for the correct symlink?
I found this thread that has given me some interesting information: http://forum.xda-developers.com/showthread.php?t=1946614
and also this one: http://forum.xda-developers.com/showthread.php?t=1405366
Thanks for the interest! Unfortunately, I cannot just get a new phone. I am basically stuck with this one for the foreseeable future.
nookle said:
It is indeed Donut. That's why I wanted to try and find a gingerbread rom or figure out how to make my own.
I unzipped the rom and dug around in there. I found some other thread on these forums about vibration and the symlinks and vibrate.ko. I checked in init.rc (on the phone) and found some lines about inserting modules relating to VibeTonez and the module "vtmdrv.ko" but I don't know if it is commented properly or turned on or symlinked or whatever. I see nothing about an actual vibrate.ko or anything.
How do I check my updater-script for the correct symlink?
I found this thread that has given me some interesting information: http://forum.xda-developers.com/showthread.php?t=1946614
and also this one: http://forum.xda-developers.com/showthread.php?t=1405366
Thanks for the interest! Unfortunately, I cannot just get a new phone. I am basically stuck with this one for the foreseeable future.
Click to expand...
Click to collapse
No prob. Always interested in the legacy devices.
I wouldn't try to fix the vibrate, the developer himself states it will likely never be fixed (http://androidforums.com/behold-2-all-things-root/54769-port-galaxy-1-6-behold-2-final.html). I didn't read into the thread, but usually some user asks why vibrate doesn't work, dev explains, etc. You don't know if the problem with the ROM is the same as the issues found in the threads you searched.
If you want Gingerbread, it looks like the device is pretty much dead, however you can port CM7 from a similar device. It would be quite a chunk of work though.
Sent from my DROID2 using xda premium
Yeah, I have been going over all those threads that have that guy's roms. He made a few of them for this phone, and I am trying to find one that is better. Or the best of them.
I think I may have found a pretty major bug in the one I have, though. I got a call, I didn't want to answer it, and I hit the volume down button to silence the ringer, but it force closed android.phone.com and dropped the call. That wasn't cool.
I am also (kind of half-heartedly) pursuing creating my own rom from scratch. It's quite daunting, but I have a lot of time for the next week or so. My sister is having a complicated pregnancy so I am spending a lot of time at the hospital. There are plenty of guides and tutorials for beginners, so I am reading those and trying to figure things out.
Or I can figure out how to work on the rom this guy made, that would make life much easier.
nookle said:
Yeah, I have been going over all those threads that have that guy's roms. He made a few of them for this phone, and I am trying to find one that is better. Or the best of them.
I think I may have found a pretty major bug in the one I have, though. I got a call, I didn't want to answer it, and I hit the volume down button to silence the ringer, but it force closed android.phone.com and dropped the call. That wasn't cool.
I am also (kind of half-heartedly) pursuing creating my own rom from scratch. It's quite daunting, but I have a lot of time for the next week or so. My sister is having a complicated pregnancy so I am spending a lot of time at the hospital. There are plenty of guides and tutorials for beginners, so I am reading those and trying to figure things out.
Or I can figure out how to work on the rom this guy made, that would make life much easier.
Click to expand...
Click to collapse
I wouldn't try to make a ROM from scratch. A better thing to do would be to port. Basically find a ROM made for a phone with similar internals (type of CPU and RAM) and port the ROM. Much easier than making a ROM from scratch which requires knowledge of a few computer languages (mainly java). There are a few porting guides available on the forum.. Lemme find a link
Sent from my Nexus 4 using xda premium
Hey, thanks for your help! It's much appreciated! And believe me, if I could get a new phone I would. This phone is on my parent's plan, and only used for calling and texting family. I can't use data or anything. At this point it's more for the sake of learning about how to build an android operating system than anything else. I just want a nice, stable, useful phone that is better than the old school flip phones (of which I have had quite a few over the years).
Once again no prob. I used a legacy device just last year but it had quite some development so all I had to do was flash Roms lol.
Anyways this is how you compile GB
http://forum.xda-developers.com/showthread.php?t=1183832
And this is how you port. I would port from a similar device like the My touch 3g
http://forum.xda-developers.com/showthread.php?t=1598713
Sent from my Nexus 4 using xda premium
Haha yeah I am in the same boat with my nook. I have been following the devs over in the nook sub-forum for a couple years now. I have had several iterations of gingerbread, a couple of ics, and now a few of jelly bean. I am used to just slamming the rom zip on the sd card and booting into recovery and flashing it over.
For this phone I had to do odin, which was a new experience for me. Went pretty painless, and I figured it out. I prefer the recovery method over odin.
I have one question about the second link, about porting. It says in the first post that if you don't have gb already compiled for your (my)device that guide is useless for you (me). Is that what the first link is for? Compiling specifically for my device? What if my device is not supported at all? Do I just pick a somewhat similar phone, compile, port, make a flashable rom, and put it on the phone and hope it doesn't brick it?
Yep thats what the first link is for. Don't compile and port for a different device, that is a sure way to brick your phone.
Is your device not supported at all? Usually legacy devices are since back then (lol) there weren't a whole ton of Android phones
Sent from my Nexus 4 using xda premium
I don't know if my device is supported or not. I have not got to that part in the guide yet. I will report back if it is or isn't.
Sorry for not getting back earlier, I've been real busy the past week or two.
I finally got ubuntu set up on a computer, and was following the first guide and ran into a few problems.
First, I wasn't able to install all the required packages. If you want to know what ones they are I wrote them down. Not sure how essential they are in the grand scheme, but they weren't available.
Second, I tried to install java and ran into a problem adding the repos for it. The second one, for src, would not work at all. So I went on sun's or oracle's website and downloaded the linux package and installed it. But apparently it didn't work because all I get after trying to lunch are lots of these:
Code:
/bin/bash: java: command not found
Basically anywhere it tries to use java I get those messages. Eventually it gives up and says I have
Code:
version: /bin/bash: java: command not found
and I should have
Code:
version 1.6
Third, after I issue
Code:
source build/envsetup.sh
I see it includes some devices, like htc passion and samsung crespo4g and samsung crespo. Is this normal?
Fourth, When I do lunch I get five options
Code:
1. generic-eng
2. simulator
3. full_passion-userdebug
4. full_crespo4g-userdebug
5. full_crespo-userdebug
Should I just pick generic-eng?
I will be out of town all week for work, and won't have access to the computer I am doing all this on. For the life of me I cannot get unbuntu to install on my laptop. Never did like ubuntu, always favored fedora.
Anywho, thanks for any suggestions.