Database Info

Tera Term Pro issue

Guys
Im trying to update my C600 to the wm6 rom,
Ive unlocked (SuperCID) my phone, app unlocked as well. However when I try run TTP it comes up saying cannot connect followed by several other characters.
Im using a XP laptop nd have followed the instructions on the thread.
One other thing is that whenever I try run a ROM update official or unofficial Windows says that romupdateutility.exe is not responding...... and closes.
Ive tried doing a hardreset but still no joy
Please help!!!
thanks
Simon

after opening TTP are you selecting Serial and then USB from the drop down list??

ok.. make sure u r in bootloader mode and not in phone mode.
hold the camra key when the phone is off then plug in the usb cable

thanks guys
but yep definitley in bootloader mode and definitaly selecting usb coonection!
any other ideas?
I wonder if my phones got somethng wrong as i cant even install the official Orange Rom? even my phone works perfectly
Thanks
Si

oh.... r u using vista????
try updating the drivers!!! read the vista thred in the first post... that might help you

Well ive tried Vista nd Xp, I too have just read the Vista thread and downloaded the drivers
tried flashing again, PC rebooted at 20% One bricked C600
luckily its a corporate phone so will retry when I get my new one - lol

Touch 9.1 rom vista problem

i whent to update this rom on my phonme and right when it was about to load it the updater on my pc crashed and vista gave some gay error help me plz?

c0x69 said:
i whent to update this rom on my phonme and right when it was about to load it the updater on my pc crashed and vista gave some gay error help me plz?
Click to expand...
Click to collapse
Search the fourm... Do not try and update using vista.. it's buggie use XP only... try putting your phone in bootloader and update using XP

Lunatixz said:
Search the fourm... Do not try and update using vista.. it's buggie use XP only... try putting your phone in bootloader and update using XP
Click to expand...
Click to collapse
he's right, and to add, you may want to start with a base rom from your providor ie t-mobile, cingular.. start with the latest rom release and use that as a clean base to flash from. good luck.

Lunatixz said:
Search the fourm... Do not try and update using vista.. it's buggie use XP only... try putting your phone in bootloader and update using XP
Click to expand...
Click to collapse
I wasted about half an hour because of this
try it in vista, it will fail and put your phone into rainbow mode.
Then take it as is to a PC with XP
plug it in via usb and follow normal directions and it should function!
I am at 97% finally,
the phone was NOT getting recognized in XP after trying it in vista till I tried the raindbow Flash method.

Cant Upgrade Error 264

Hi there,
i cant upgrade my phone. i get an error 264.
i even hardresetted the phone and tryed.
when i start the "hardspl.bat" my mobile wants to run a jumper file. but when i press yes the screen turns white the connection brakes and i cant upgrade too.
and when i dont press yes and do nothing the updater starts but its stock at 0% and after some time i get the error o0
what have i done wrong ?
greetings
sluppy

same thing happens here, my usb connection losts while whitescreen loaded, i will try with another computer tomorrow...
by the way bootloader way doenst work, i have tryed several times, several roms, it has just come back from service due to speaker problem...
G4
OS 2.20.7.34
Qtek s200

so i can get into the 3 colored screen if i dont press yes when i am asked if i want so start the jumperspl. if i dont press anything the screen gets into 3 colors. but i get an error on the PC and i can do anything. but it seems that the usb connection is still running.

sluppy said:
so i can get into the 3 colored screen if i dont press yes when i am asked if i want so start the jumperspl. if i dont press anything the screen gets into 3 colors. but i get an error on the PC and i can do anything. but it seems that the usb connection is still running.
Click to expand...
Click to collapse
Please read the thread in my signature...
be patient ~~~ only less than half an hour to complete flashing........
download all needed files first~~~~

What is yr PC oS
I have d same error in win XP and Vista.
Try use win 2000.
I solved my using win2000.

its just not working! i copied the jumperfiles, i plugged the phrophet i run the spl i plugged the propeht in again and when i run the update thing i get an error.

it is me again
it has done today, i hav triyed again with my old notebook at work today and it's succeded, it think my home computer's mainboard have a sumething like usb connection problem.
I will try later with rear USB ports

i tryed it on a nother maschine and its not working. same error. and i 100% did whats described in the threats! every available method

sluppy said:
i tryed it on a nother maschine and its not working. same error. and i 100% did whats described in the threats! every available method
Click to expand...
Click to collapse
not about PCs, read again my thread ... is that you have a G4 device?
go to my signature again. Many successful cases.....................

yes its a g4 and i read ure thread. and tryed it serveal times. but its just not working

sluppy said:
yes its a g4 and i read ure thread. and tryed it serveal times. but its just not working
Click to expand...
Click to collapse
read more
http://forum.xda-developers.com/showpost.php?p=1937273&postcount=103

okay i think i found the error ... i had windows runnin on my mac with a virtuall mashine and it wasnt able to connect virtual windows with the bootloader.
but i got an other error now. if i run hardspl, i everything seems to run find. but its still the old 2.15 hard spl on the prophet even if its supposed to be a 2.20.
do i have to crack some kind of romlock befor? (its a german o2 XDA)
oh okay do i have to unlock the CID? i searched the prophet forum but didnt find anything specific.
-> http://wiki.xda-developers.com/index.php?pagename=Prophet_CID_Unlock is G4 only :/

Hey guys,
i had the same error and i tried just the same one more time, so romupdateutility.exe and it worked!!

error codes and its definition
this might help to define those error codes... got it in one of the files i downloaded from this forum...
sometimes README helps )

Having trouble flashing

Hey guys, I am trying to flash Dutty's newest rom, but im having some trouble...
When I double click the RUU.exe file, I put a check in the checkbox, hit continue. then put another check, hit continue, then I get an error saying:
"Error [200]: Invalid update tool"
"Please get newer update utility"
This is odd because I read on the Wikki that you get this error if you don't have HardSPL, but I do. In fact, I have flashed at least 4 or 5 different roms on this phone. Another thing is that my phone isnt in activesync mode, and for some reason when I try to install activesync (directly from microsoft's website and from the CD that came with my tilt) I get an error saying that it wont install... And another weird thing is that this never stopped it before, I have flashed a rom without it being in activesync with the computer...
When I tried to install Microsoft's activesync directly from their website, I double click the setup.msi file, and then it says :
"preparing installation..."
"The wizard was interrupted before Microsoft ActiveSync 4.5 could be completely installed.
Your system has not been modified. To complete installation at another time, please run setup again.
Click Finish to exit the wizard"
And this happens every time I try it... I have tried redownloading the file and I get the same issue... I even checked to see if maybe I downloaded the wrong version (like the vista version or something) but I downloaded the correct one.
Now, when I try to install activesync from the CD that came with my Tilt, I get an error saying that I need to update my Adobe Flash Player, So i click on the link that it gives me, and I updated it. Even though it is currently up to date, I STILL get this error every time I try, even after restarting my computer.
Any ideas?

put the phone in bootloader and tell me exactly what it says there.

jjb007 said:
Hey guys, I am trying to flash Dutty's newest rom, but im having some trouble...
When I double click the RUU.exe file, I put a check in the checkbox, hit continue. then put another check, hit continue, then I get an error saying:
"Error [200]: Invalid update tool"
"Please get newer update utility"
This is odd because I read on the Wikki that you get this error if you don't have HardSPL, but I do. In fact, I have flashed at least 4 or 5 different roms on this phone. Another thing is that my phone isnt in activesync mode, and for some reason when I try to install activesync (directly from microsoft's website and from the CD that came with my tilt) I get an error saying that it wont install... And another weird thing is that this never stopped it before, I have flashed a rom without it being in activesync with the computer...
When I tried to install Microsoft's activesync directly from their website, I double click the setup.msi file, and then it says :
"preparing installation..."
"The wizard was interrupted before Microsoft ActiveSync 4.5 could be completely installed.
Your system has not been modified. To complete installation at another time, please run setup again.
Click Finish to exit the wizard"
And this happens every time I try it... I have tried redownloading the file and I get the same issue... I even checked to see if maybe I downloaded the wrong version (like the vista version or something) but I downloaded the correct one.
Now, when I try to install activesync from the CD that came with my Tilt, I get an error saying that I need to update my Adobe Flash Player, So i click on the link that it gives me, and I updated it. Even though it is currently up to date, I STILL get this error every time I try, even after restarting my computer.
Any ideas?
Click to expand...
Click to collapse
I can't help with the active sync problem (you don't have vista, do you?) but as for flashing...flash from the sd card http://forum.xda-developers.com/showthread.php?t=336158

P1Tater said:
put the phone in bootloader and tell me exactly what it says there.
Click to expand...
Click to collapse
excuse my noobness , but im not sure what that means

jjb007 said:
excuse my noobness , but im not sure what that means
Click to expand...
Click to collapse
OK, with the phone powered on, press and hold the camera button and insert the stylus in the reset hole until the tri-colored screen comes up. This is bootloader. Tell me what it says there, exactly.

jjb007 said:
excuse my noobness , but im not sure what that means
Click to expand...
Click to collapse
After you put your phone in bootloader mode as P1 said, you will see something like this:
KAIS1*0
SPL-1.93.0000
CPLD-8
Once you make a record of what is displayed, reply back with it.

ok, this is what it says (in the top red box):
KAIS1* MFG
SPL-1.0.OliPof
CPLD-8
Then in the white box it says: "Serial"

jjb007 said:
ok, this is what it says (in the top red box):
KAIS1* MFG
SPL-1.0.OliPof
CPLD-8
Then in the white box it says: "Serial"
Click to expand...
Click to collapse
Since you already have it in the boot loader just keep it there and try to flash it, see if you get any errors that way.

What version of Windows is on your computer?
If your running vista you need the mobile device center, not activesync.

Im using windows XP, I will try flashing while it is in bootloader, I edit my post once I see if it is successful or not.
**It did not work when I tried flashing from the bootloader screen, I got the same error

which rom are you flashing your device with?

I am trying to flash Dutty's newest ROM, and right now Dutty's 3rd or 4th newest one is on my phone.

after you put your device in bootloader, and connected it to the pc, did the word "serial" change to "usb"? and were drivers loaded for the device? there should be a htc usb sync or microsoft usb sync in your device manager

XtreMe_G said:
after you put your device in bootloader, and connected it to the pc, did the word "serial" change to "usb"? and were drivers loaded for the device? there should be a htc usb sync or microsoft usb sync in your device manager
Click to expand...
Click to collapse
Yea, I dont see either of those in my device manager...

Sounds like you're missing the drivers. Need to roll 'em back to the XP drivers.

GSLEON3 said:
Sounds like you're missing the drivers. Need to roll 'em back to the XP drivers.
Click to expand...
Click to collapse
Alrighty... so how do I go about doing that?

jjb007 said:
Alrighty... so how do I go about doing that?
Click to expand...
Click to collapse
You use google or XDA search via google. Try ROM flashing with Vista, etc...
Remember, there is a lot of valid data in Hermes forum as well

jjb, I had the same problem the other night on my home computer with XP. Luckily, I did not have the same problem with my work computer, also with xp. Something happended on the home computer to fcuk up the drivers (i'm guessing, as GSLEON pointed out). I had the same install issues with Activestinc. I had these issues in the past (at least 6 months ago) and was able to finally get Activestinc installed after rebooting multiple times. This time I only tried once before I waited to go back to the office and flash. I'm not sure what to do to rebuild(?) the drivers, but you might try a different computer. Also, my google search (for the 200 error) the other night pulled up a different web site that listed a lot of error codes and what they mean. I'm gonna try and figure out my driver issues with activstinc this weekend and I will post if successful.

ptgptg said:
jjb, I had the same problem the other night on my home computer with XP. Luckily, I did not have the same problem with my work computer, also with xp. Something happended on the home computer to fcuk up the drivers (i'm guessing, as GSLEON pointed out). I had the same install issues with Activestinc. I had these issues in the past (at least 6 months ago) and was able to finally get Activestinc installed after rebooting multiple times. This time I only tried once before I waited to go back to the office and flash. I'm not sure what to do to rebuild(?) the drivers, but you might try a different computer. Also, my google search (for the 200 error) the other night pulled up a different web site that listed a lot of error codes and what they mean. I'm gonna try and figure out my driver issues with activstinc this weekend and I will post if successful.
Click to expand...
Click to collapse
Thanks for the input... im going to try re-installing windows when I get the chance and hopefully that will clear up this driver issue.

rather than going through all the trouble trying to solve this problem, i would just flash using the microsd card

Problems updating ROM

Hello, im trying to update the rom on my spv e650 which is a vox however i have followed the instructions (i think) and when i run the rom update etc the phone boots saying 0%
then reboots again and the update software just says "image corrupt" on all roms
any ideas
Thanks,

Have you done USPL?

Yes that appears to work fine

What OS are you using? XP or Vista or 7?

Vista 64x
also should point out that mobile centre keeps crashing when trying to flash also

You can flash using Windows XP.
It's work fine in XP

krzysio290 said:
You can flash using Windows XP.
It's work fine in XP
Click to expand...
Click to collapse
Its works fine in vista as well as in window 7 too.

So am i doing this correctly?
Launch SDA_ApplicationUnlock, unlock phone then soft reset the device
Launch uspl_116_jockyw and keeping go through the prompts
Launch ROMUpdateUtility for the rom
? or am i missing something out

Try it on a non-x64 PC! I am pretty sure it doesn't work on it. Once you flashed USPL though, you can simply flash again and again from SD-Card!

I must flash&run USPL ever when I try flash cooked ROM. Are you agree?
HardSPL is great method, only flash ROM, but it isn't available on Vox

krzysio290 said:
I must flash&run USPL ever when I try flash cooked ROM. Are you agree?
HardSPL is great method, only flash ROM, but it isn't available on Vox
Click to expand...
Click to collapse
This is how I did.Follow Instructions.
1) Connect your mobile with pc check whether its connected with active sync or not.
2) Use sda_application unlock.exe to unloc the mobile ..It will ask you to reboot.Dont reboot .Keep it as it is.
3)Then open uspl_116_jockyw.bat .Run it as administrator and it will as you to follow the instructions.just follow that .After all instructions the bat file will vanish.The screen of your mobile goes black.
4) Run Flash.exe from the ROM you downloaded.Wait for 10 mnts then it will reboot atomatically.
5) after reboot dont do anything ..Have some patience .it will do "cold reboot".It will take 5 mnts.
After this it will ask you to press OK to reboot .
Thats it .Enjoy Now.
Thanks
Yogusmilu

Edit
Got it working tried again and a different bootloader appeared
thanks for the help guys much appreciated

I use this method from first time
Maybe someone can develop HardSPL to our Vox