Related
Just curious if this is working for anyone. It didn't seem to work for changing the splash screen to the black HTC on my aku 2.3.1 ROM. I don't think I would try this on a complete ROM upgrade.
I'm wondering if this is due to Vista or the aku...
Well, it seems these attempts should be avoided as related by others....
I could not install Jesterz AKU2.2 on Vista yesterday. Kept giving me Error [260], i.e. the upgrade tool was losing connection with the device. Worked fine on XP pro this morning.
It could be related to the Mobile Device Center that replaces Activesync.
tried a downgrade yesterday evening on vista and it smashed my phone.
so i don't recommend it you can't get a "good enough" connection in bootloader from windows vista to the phone and active sync is not working anyway so that crap will be away by this evening. It seems to me vista is not yet ready. Good enough means that it shows on the phone that USB sign in the bootloader but the flash utility can't get a connection
cr0ssy, that's exactly what happened to me. In the bootloader I get the USB sign but the upgrade tool won't recognise the device. What I noticed was that Vista uses a different driver than XP. This new driver is what could be causing the problem.
hm maybe the old driver works on windows vista, too if just don't let it install automatically.
did you get the phone back to work?
I wonder if this has something to do with a move from NDIS- to a serial-based connection in Vista....
When in bootloader Vista recognises the device as Generic NDIS.
is yours back working kta? if, did you just put xp back on your computer and reflashed it in the bootloader? (or other computer)
cr0ssy said:
is yours back working kta? if, did you just put xp back on your computer and reflashed it in the bootloader? (or other computer)
Click to expand...
Click to collapse
Yes I then managed to flash the ROM from bootloader on another PC running windows xp.
mh did you flash then with the usual boot utility? is it possible to flash these customized roms which have a upgraderom.bat or something like that in bootloader mode? (don't want to expermient now that its not really working anymore)
sorry for getting a little bit offtopic
managed to upgrade without a problem on vista
which rom did you use and did you manage to install active sync?
phone is back working :> thanks kta
Yesterday I tried flashing my friend's Magician ROM on his Vista and had the same problem and had to use an XP laptop to flash. The upgrade utility program and others based on it (MaUpgradeUTNoID, etc.) seem to have a problem working with the new vista drivers.
without the beta Mobile Device Center, which you should downlad from MS, you can just access in explorer mode to your device, but you can not install anything to you device from vista. Just download the Mobile Device Center for Vista from the MS Page.
Mentes said:
without the beta Mobile Device Center, which you should downlad from MS, you can just access in explorer mode to your device, but you can not install anything to you device from vista. Just download the Mobile Device Center for Vista from the MS Page.
Click to expand...
Click to collapse
I have the Mobile Device Center installed and still have this problem.
the ROM upgrade tools do NOT work on vista (yet) there are several calls open with Microsoft to get this fixed, however I don't think it will be fixed in a few days seeing the speed of Microsoft......
For now, only update using windows xp
does the upgrade tools work on WinXP X64 edition?
liuyang said:
does the upgrade tools work on WinXP X64 edition?
Click to expand...
Click to collapse
They should as it has 32bit comp. however I havent tested it, so I'm not fully sure.
So, I tried to use Parallels (running windows XP) on my Intel Imac to flash a Kaiser Rom onto my AT&T Tilt. I'm currently stuck on the bootloader. I think I did find a solution, but I need to wait 10 minutes til I can download another Rapidshare file. In the meantime . . .
I think I did everything right. HardSPL worked fine, but then, when I tried to flash Dutty's Dual v4 ROM, it stopped at 6% and told me there was a communication error. I tried it a few more times, tried Dutty's Touchflo Rom (that got to 4%) . . . still no luck. Same error. In between each try, I reset using the stylus and sometimes the stylus while holding down power and camera.
Am I doing something wrong, or was my mistake trying to do this via parellels?
Current screen says:
KAIS1*0 MFG
SPL-1.0.OliPof
CPLD-8
USB
Thanks, guys.
I can confirm that if you install xp via boot camp then you can flash fine on a mac. I haven't tried going through an emulator such as parallels though. It should work fine though as long as parallels has taken over the usb ports.
Yeah, the USB connection wasn't the problem. And, unfortunately, I don't have extra XP licenses lying around to bootcamp. my mac.
Anyone have any idea? I'll give you a cookie . . .
By the way
It is error 262 that I'm getting . . .
I went through bootcamp boot as well, I rather assumed that I was going to need direct access to the hardware rather than the pass through of parallels...
btw you can set up parallels to boot a bootcamp partition... so you can use the direct boot and parallels from the same installation.
drewcopeland said:
It is error 262 that I'm getting . . .
Click to expand...
Click to collapse
I might have to look into that. My "solution" didn't work. I'm going to try to find the original ROM somewhere . . .
zenrandom said:
I went through bootcamp boot as well, I rather assumed that I was going to need direct access to the hardware rather than the pass through of parallels...
btw you can set up parallels to boot a bootcamp partition... so you can use the direct boot and parallels from the same installation.
Click to expand...
Click to collapse
I am using Fusion instead of Parallels but this is what I do. I only have 1 copy of xp installed via bootcamp but I can also access it through Fusion.
I also have fusion on my MacBook Pro, and it failed when tried to flash. So I bootcamp and started XP and it flashed flowlessly
If you own original XP CD (like me) you can always call microsoft to activate, and since it is installed in 1 PC then fine (you'll have 1 license for parallel & another for Bootcamp)
drewcopeland said:
So, I tried to use Parallels (running windows XP) on my Intel Imac to flash a Kaiser Rom onto my AT&T Tilt. I'm currently stuck on the bootloader. I think I did find a solution, but I need to wait 10 minutes til I can download another Rapidshare file.
Click to expand...
Click to collapse
Which version of parallels do you have? In version 5160 the usb flashing works fine, in 5582 it is broken, as is in version 5584. They had an special build 5582.5 which allowed me to flash my phone correctly and according to parallels, the "next" version will include those usb fixes.
I'm using the latest version 5584 and when I need to flash my phone, first i shut down windows vm, install parallels 5160 over the current version and then boot up windows. I ignore the installation of parallels tools and just flash my phone. Then shut down windows again, re-install parallels 5584 and all is fine again.
Hope this helps you...
that does. Do you mean the most recent update will work?
edit: never mind. the most recent is 5583. I'll try to find 5160
drewcopeland said:
Yeah, the USB connection wasn't the problem. And, unfortunately, I don't have extra XP licenses lying around to bootcamp. my mac.
Anyone have any idea? I'll give you a cookie . . .
Click to expand...
Click to collapse
If you have a valid license for parallels, then you have a valid license to use bootcamp...
That said, I have flashed through parallels and vmware fusion TONS of times (about to do it again, in fact). So long as you've routed the "HIGH GENERIC RNDIS" device to the virtual machine it should work fine.
hey guys, ive flashed my phone many times before. the problem is i formatted my laptop and installed vista again. now every time i try to flash a ROM, i get an error message that says Rapitool has stopped working, and then and error 200- INVALID UPDATE TOOL
What should i do?
guciodog said:
hey guys, ive flashed my phone many times before. the problem is i formatted my laptop and installed vista again. now every time i try to flash a ROM, i get an error message that says Rapitool has stopped working, and then and error 200- INVALID UPDATE TOOL
What should i do?
Click to expand...
Click to collapse
flash using sd card
guciodog said:
hey guys, ive flashed my phone many times before. the problem is i formatted my laptop and installed vista again. now every time i try to flash a ROM, i get an error message that says Rapitool has stopped working, and then and error 200- INVALID UPDATE TOOL
What should i do?
Click to expand...
Click to collapse
Post in the right forum?
Have you checked out the How to flash using vista thread already?
I know flashing with vista isn't the easiest thing to do but its been done. If you can't get that work.. use a machine with XP on it or read up on flashing from your SD card.
it would be good if that method actually worked. the tricolor screen just appeared and nothing happened.
rsfaze said:
Post in the right forum?
Have you checked out the How to flash using vista thread already?
I know flashing with vista isn't the easiest thing to do but its been done. If you can't get that work.. use a machine with XP on it or read up on flashing from your SD card.
Click to expand...
Click to collapse
Its hard to flash with vista? I have vista and flash just fine. I didn't know there was a difficulty with this
bartimeus said:
Its hard to flash with vista? I have vista and flash just fine. I didn't know there was a difficulty with this
Click to expand...
Click to collapse
there were some driver issues but since then corrected. I was just pointing out that could be the issue for him.
rapitool error in Vista 64bit it seems. No solutions?
http://www.microsoft.com/downloads/...vz4DaAjOYBsm8cxOlFr0ccfX7KIBq9obZqM19pDNWag==
Update Mobile Vista software. Fixes Rapitool error
Hi
Just for the fellas having problems when upgrading to a custom or signed ROM on the HTC FUZE on a computer with windows 7 and windows mobile device center.
you MUST be online at the time of installing a new rom
so the windows update downloads the " qualcomm cdma technologies msm" driver that recognizes your FUZE when windows mobile " is not present ".
I don't think I was connected when I did mine.
And that was flashing the Energy rom onto my Fuze.
I can't remember 100%, but I'm ~80% sure I wasn't. Maybe I just got lucky?
EDIT: Though that wasn't the first time I'd flashed. Maybe that was the differentiating factor.
alfmetal said:
Hi
Just for the fellas having problems when upgrading to a custom or signed ROM on the HTC FUZE on a computer with windows 7 and windows mobile device center.
you MUST be online at the time of installing a new rom
so the windows update downloads the " qualcomm cdma technologies msm" driver that recognizes your FUZE when windows mobile " is not present ".
Click to expand...
Click to collapse
i'm guessing this is the first time you're flashing for W7, the phone goes to bootloader mode and requires drivers that can be gained from Windows Update... after the first time, if you flash again using the same USB port, you'll be fine... using another USB port requires installing drivers again but you'll have the drivers saved in the windows folder
Is there some trick to get customruu.exe working?
Also i have problem syncing, i can only get it working if i disable fast data syncing.
I'm running latest energyrom and win7 ultimate x64 rtm
BigJayDogg3 said:
I don't think I was connected when I did mine.
And that was flashing the Energy rom onto my Fuze.
I can't remember 100%, but I'm ~80% sure I wasn't. Maybe I just got lucky?
EDIT: Though that wasn't the first time I'd flashed. Maybe that was the differentiating factor.
Click to expand...
Click to collapse
yeah, i think thats the difference, i was using a tmobile MDA with WM 5 like 2 years ago, and used to install custom roms but back in the time i had dsl so i never had a problem doing it.
so, BTW, how fast is the Energy rom?
the one i have looks nice but i feel is very slow
paperWastage said:
i'm guessing this is the first time you're flashing for W7, the phone goes to bootloader mode and requires drivers that can be gained from Windows Update... after the first time, if you flash again using the same USB port, you'll be fine... using another USB port requires installing drivers again but you'll have the drivers saved in the windows folder
Click to expand...
Click to collapse
i wonder if there is an offline mode to do this?, without an internet connection.
Daniehabazin said:
Is there some trick to get customruu.exe working?
Also i have problem syncing, i can only get it working if i disable fast data syncing.
I'm running latest energyrom and win7 ultimate x64 rtm
Click to expand...
Click to collapse
not that i know, but i have win7 32 bits version, so maybe its has something to do with the 64 version
It could be that there are no 64bit drivers for the phone available. I use Win7 x32 and it is a hassle getting it first sync'd up. What I normally do is just put the phone in bootloader mode before plugging in the USB cable. That way it only downloads the drivers it needs the first time.
Usually takes me a few resets of the PC and a couple Mobile Device Center restarts to get it to start ticking. Perhaps try downloading the latest Mobile Device Center, even if yours is the latest... just install over the existing installation. That's worked for me a few times.
Is it your first time flashing? Is it a newer Fuze? Because the latest Fuze's have a newer bootloader that is 1.95 (vs 1.90). I haven't found a way around it yet unless perhaps flash an official AT&T rom that has the 1.90 bootloader that may downgrade it... then HardSPL.
Just to add, windows 7 64bit here and haven't noticed one difference or problem with anything.
player911 said:
It could be that there are no 64bit drivers for the phone available. I use Win7 x32 and it is a hassle getting it first sync'd up. What I normally do is just put the phone in bootloader mode before plugging in the USB cable. That way it only downloads the drivers it needs the first time.
Usually takes me a few resets of the PC and a couple Mobile Device Center restarts to get it to start ticking. Perhaps try downloading the latest Mobile Device Center, even if yours is the latest... just install over the existing installation. That's worked for me a few times.
Is it your first time flashing? Is it a newer Fuze? Because the latest Fuze's have a newer bootloader that is 1.95 (vs 1.90). I haven't found a way around it yet unless perhaps flash an official AT&T rom that has the 1.90 bootloader that may downgrade it... then HardSPL.
Click to expand...
Click to collapse
Nah, had my raphael a long time, have flashed a couple of roms before, i'll try to put it in bootloader mode and let it install the driver, i'll keep searching for a customruu that works for 7 x64, Thanks for the reply
i got syncing working, uninstalled the driver for the mobile remote adapter, and let it download a new one from windows uppdate, and now it works, stange since it's the same driver as before...
I was having the same problem with windows 7 x64 and the fuze... found my solution elsewhere so i thought i'd post it here in case someone checks here first like me... I needed to install Windows Mobile Device Center to get the driver to work correctly with an active sync connection =)
I have W7 ultimate x64 and I can't flash either. But I don't mind. I just put the .nbh on the memory card, start up customRUU and it puts my phone in boot loader itself then installs the ROM off th ememory card.
even there's already a WMDC on win7, I tried to download it again from brothersoft, then it's update the driver..... done!
btw I'm using win7 x86, so I haven't tried on x64...
img707.imageshack.us/img707/3830/51947559.jpg
I can't post a pic or link...
Hi, Im new to this forum and Im interested in putting a new ROM on my Wizard.
On my PC i have the new Win7 Ultimate.
How does the process ofputting a new ROM on my phone go on my windows??
Thank you, regards
tljubas said:
Hi, Im new to this forum and Im interested in putting a new ROM on my Wizard.
On my PC i have the new Win7 Ultimate.
How does the process ofputting a new ROM on my phone go on my windows??
Thank you, regards
Click to expand...
Click to collapse
Download and install Windows mobile device center
ducbinh.vn said:
Download and install Windows mobile device center
Click to expand...
Click to collapse
incorrect....you need to download Windows XP mode from Microsoft online(search it on google) then run the installler, etc... then run Windows XP mode, plug in your phone through USB and in the top corner of the Windows XP mode under the USB tab click attach "wizard usb serial" or whatever is the appropriate name.Hope that helps!!!
Nope, when RUU starts to do the upgrade, Conection fails on Windows XP mode, axactly the same on Win7. The solution? Good old fashioned Win XP.
CAPHI said:
Nope, when RUU starts to do the upgrade, Conection fails on Windows XP mode, axactly the same on Win7. The solution? Good old fashioned Win XP.
Click to expand...
Click to collapse
When i used xp mode i found that in order to have a successful flash you must hard reset your phone before you flash, mount the device with the RUU running from the desktop, and once the RUU begins you must remount your device once it gos into the boot screen(it shows up as unidentified...but its the one highest up in the list)then your device will do its thing and then you magically have a new ROM! Hope this helps, and yes obviously Windows XP is a better solution but the thread is updating a ROM on Windows 7...
OK, i got it... im downgrading my PC to Windows XP SP3...
Thanks guys
no need to downgrade OS, use vmware to install XP inside it
my IPL/SPL 2.24. how can i know if it is CID unlocked or not??
tljubas said:
Hi, Im new to this forum and Im interested in putting a new ROM on my Wizard.
On my PC i have the new Win7 Ultimate.
How does the process ofputting a new ROM on my phone go on my windows??
Thank you, regards
Click to expand...
Click to collapse
hi download windows mobile device center 6.1 from ms i have it much better then active syn no need to load xp or anything so the member thats said its incorrect is wrong
grtz cyber weesje
BASSMANBOB said:
incorrect....you need to download Windows XP mode from Microsoft online(search it on google) then run the installler, etc... then run Windows XP mode, plug in your phone through USB and in the top corner of the Windows XP mode under the USB tab click attach "wizard usb serial" or whatever is the appropriate name.Hope that helps!!!
Click to expand...
Click to collapse
he is right your incorrect windows mobile device center 6.1 no need to downgrade or load the xp virtual unit for that i use it daily and many ohters active syn is old ms even stopt working on it
grtz weesje
tljubas said:
my IPL/SPL 2.24. how can i know if it is CID unlocked or not??
Click to expand...
Click to collapse
When your Wizard is starting up, there comes a screen with in the left up corner some info like CID etc. When your Wizard is CID unlocked, then there behind CID x.xx.olip.
I know that it works with a g4 version of the wizard. Look around for more info
Edit: This is only when you succesfully installed Hardspl
I just flashed a rom on my p3300 yesterday and I did it on Windows 7 ultimate.. For me it was working just like that..
Today I will try my fathers Wizard on it
**edit**
No luck on Windows 7 installing WM6.5 on the wizard..
I installed XP on VMware and that worked for me..
Used activesync 4.5 on it.. Installed the CR96 WM6.5 of Cracing
Works like a charm!!
So yeah... Install VMware, that will be the best way to flash your Wizard.
Holla!