well after doing alot of tweaking,my end key wont turn off my screen now.i dont know what i did.but doesn anyone know how re-enable this?like a cab or reg key?thanx
well, it happened to me too
I think after install touch commander and some patches to it. I made a hard reset and did not install it anymore...
i found out that if i didnt not enable dial look up in the today screen it wouldnt work,so i enable it and it works now.
Related
Sometimes, about an 80/20 split, the s2u2 program doesnt correctly lock the phone.
The red discon/power key allows the unlocking of the phone.
When it is working, if I press the red button, it turns the backlight off like normal and s2u2 locks the phone and can only be unlocked by it.
Anyone know of a fix or a setting I have wrong? Reseting doesnt help, and I cant figure out why it works sometimes.
The developer is aware that this problem exists for some devices and stated that there is no fix for this problem. I liked the program but removed it after I found out there would not be a fix for this.
doesn't bother me so much
I too use the s2u2, and i noticed that i get the same thing. However, since all other buttons lock, and use the end key to unlock, I thought it was a normal function. As of v1.01, i still use it, enjoys it, and will continue to use it. When the my 750 goes to sleep, I hit the end key twice, and it comes back to life. Didn't expect any real problems withthe phone dialing itself when it's in my pocket, so for me at least, it works the way it supposed to.
Just my two cents.
Hello all... got kind of a big problem that i at the moment don't have an answer to,..
inastalled advanced configuration tool 3.2 on HTC Polaris, the first crash i had was when I enabled animation for menus... (the start menu turned black and the polaris froze), but when i managed to start the advanced configuration tool i unchecked it and it was ok,...
the MAJOR PROBLEM accured when I set the touch screen sensitivity, because the touch part of the screen is inresponsive,.. meaning it does not work at all,.. tryed very hart pressing but it doesn't do it.. the problem is because i can't reach eg start menu or the lower 2 shortcuts with hard button cursor (the wheel)... gestures work however, so i can call the touch flo cube but am not able to select anything, and sam thing goes for enetering pin,.. so i'm not able to make phone calls at the moment.. did few hard resets, and uninstalled the adv. conf. tool but nothing helped... can anyone tel me where (and how to get there) can i adjust this back to normal, i wanted to do this in the advanced configuration tool 3.2 but the problem is you cant make any changes since the screen doesn't work,.. same with reinstalling the program, i can select to install it on a card but canot "click" on next since the screen doesn't do it and the hard keys "can't go there"
so really really someone help me please...
thnx
Are you sure you hard reset and this problem went away or did you mean soft reset?
Maybe aligning the screen will help reset the pressure? Click the button in the middle of the wheel and the GPS button at the same time, the Windows align screen pops up. See if that helps.
I find it very hard to believe that you hard reset and the touch screen sensitivity is still not there. That can't be right.
Hi,
thanx for the reply,... another problem that accoured afterwards was that my friend held the end button (wich locks the keys, screen) and the phone was additionally locked... and literally nothing (again NOTHING ) helped, spent 5 hours trying to save the situation,.. i did soft reset (so your assumption was right) but when later tryed hard reset it probably wasn't done since the instructions say you do it with holding gps and iExplorer buttons while soft reseting it... this resulted in getting the "hard reset screen" wich says to confirm hard reset with hitting the send button, wich unfortunatelly i wasnt able to find in hard keys, and nothing else but this warning text was on the screen as well.. so in the end it probably ended upo wit soft resetting it, anyways it didn't help,... i decided to reinstall the rom i downloaded on htc official site,... it went thru ok and the phone is , though out of the box at least functional,... but in the end, i must admit that am a little surprised this happened with this tool pack (i actually avoided altering the registers just in order to avoid this kid of situations since i don't really know much about these things)... was expecting it to work (in my case) a bit better, more stable. All i wanted really was to get a bit louder speaker volume when ringing and ability to alter the HTC home toolbar, since i find the weather screen totaly irreliable and never really use it, so i thought I would have sth there that i might really have some use of..
well nevertheless.. the phone is working, that's all that matters at the mom so i can again start finishing my phd wich i am defending in a week
PS. the fact that you can not do practically anything without the touch screen just sucks big time, if i compare it to the mouse on pc,... i saved the situation many times with the keybord .. in 1 word strange
take care
My Mobile
Perhaps you should have tryied out the "My Mobile" aplication that allows you to use your mobile from a PC.
It shows a windows with the mobile screen and you can touch it and use the mobile like if you was touching the REAL mobile...
Late for that solucion, perhaps another with that problem can solve it this way...
Chears
@gastonfama: am not sure this would help, since a friend that has htc diamond has this tool pack on and it work k ok on his phone,.. that's why i predicted that it is going to be stable enough on mnie as well,.. so in my thinking, if the 2 htc that are rather alike had such different "reaction", than an emulation would be even less comparable to mine, thanks though
Had the same problem with Schaps_AdvancedConfig and wrong HKEY_LOCAL_MACHINE\Drivers\TouchPanel\PressureThreshold setting.
XML I used had "200" as advised value (system default is 2908!),
after changing you could hit it with a hammer and nothing.
Managed to set is back to recommended value 9000 using MyMobiler app and all problems gone.
See also HKEY_LOCAL_MACHINE\Drivers\TouchPanel\PressureThreshold
sys default is 18866, I use now 19866 and I'm happy
Check tips&tricks thread
I got the same problem, I wanna to install "My Mobiler" but due to the screen is locked, I can't continue the installation, any help ?
well as far as I see here (forgot how i installed it after previous post) you have an exe here :
http://www.mymobiler.com/downsafe.aspx
so you will install it from the pc anyways, but how will you make the confirm on where to install it (mybe if you put storage card out and there will be only 1 memory option, but you will still have to confirm installation i guess).. i wasnt able to confirm without the screen on polaris,.. maybo on some other phone
double post...mistake
I had that same screen not working problem after tweaking the phone with advanced config 3.3, 3.2, 3.1, only hardware buttons work.
Problem can only be solved by Hard Reset. Version 2.2 I think is the only one that works (not thoroughly tested though)
So what did I do....
I installed .net 3.5 compact on my phone, and then installed Advanced config and made a few TF3D tweaks. Everything seemed to work ok. I then installed hTorch and it worked.
I then installed dotfred's taskmanager and then did another TF3D tweak. (The cache size one) and then did a soft reboot.
Now my phone doesn't even work. I can barly boot up and when it does boot up I get all of these error about ***.exe can run because it is not a valid
application.
Im thinking it was the .net 3.5 maybe.. or the dotfreds... no idea really.
Phew... so What'd I do wrong? I cant figure out how to un-install the stuff I put on it, because active sync wont run because it wont load on my phone. I literally cant do anything on my phone. The time doesn't even show. All I can see is the battery, reception and that it is on vibrate. I cant even change the volume.
Thanks for any help... I would love a way to do it w/o losing all of my numbers but that maybe the only way. (but I dont even know how to do it like that)
cableguy84 said:
So what did I do....
I installed .net 3.5 compact on my phone, and then installed Advanced config and made a few TF3D tweaks. Everything seemed to work ok. I then installed hTorch and it worked.
I then installed dotfred's taskmanager and then did another TF3D tweak. (The cache size one) and then did a soft reboot.
Now my phone doesn't even work. I can barly boot up and when it does boot up I get all of these error about ***.exe can run because it is not a valid
application.
Im thinking it was the .net 3.5 maybe.. or the dotfreds... no idea really.
Phew... so What'd I do wrong? I cant figure out how to un-install the stuff I put on it, because active sync wont run because it wont load on my phone. I literally cant do anything on my phone. The time doesn't even show. All I can see is the battery, reception and that it is on vibrate. I cant even change the volume.
Thanks for any help... I would love a way to do it w/o losing all of my numbers but that maybe the only way. (but I dont even know how to do it like that)
Click to expand...
Click to collapse
The simplest would be a hard reset but will cause you to loose data, to do this press the the volume down button while pressing the reset button (next to the usb port) then it will ask if you want to hard reset so press the volume up. This will place your phone back to factory defaults.
Any idea how this happened? I would like to do all of this over again, just not sure what I did / didnt do...
I cant get this thing to hard reset.... ugh!
I have tried pressing and holding the volume down button and then pressing and holding the reset button next to the USB and it just keeps rebooting. (Also tried the center button and the volume button at the same time and then hitting and/or holding the reset button.)
Whats odd is sometimes is comes up with my password prompt and it works, other times that same password prompt comes up but my password doesnt work....
Wow... after about 15 reset, and 5-10 times trying to hard reset it... it just started to work all of a sudden..
I'm afraid to reset it again. No idea whats going on... worst part is that I work in IT so I'm really confused as to what is going on.
Hard reset is performed by doing the following.
1. Press the volume down button.
2. Press the action button.
3. Press reset button with stylus.
Press all of the above mentioned sections and continue pressing until you are prompted to perform a Hard Reset.
hchavarria said:
The simplest ... press the the volume down button while pressing the reset button (next to the usb port) then it will ask if you want to hard reset so press the volume up. This will place your phone back to factory defaults.
Click to expand...
Click to collapse
This is the method for entering bootloader mode, not Hard Resetting the device.
If you have your phone synced to outlook, you should be able to restore your contacts. Also I save all my contacs to sim via sim manager.
a bit of advice which I use... always backup ur phone after installing a program. After each single install do the backup, you should have Sprite Backup which came with ur phone. This way, you can go back to any one point in time to see what F'ed up, takes a bit longer but its worth it.
This doesnt solve ur current problem but at least u can make sure it doesnt happen again... and fyi, everyone ends up hard resetting their phone at some point in their life and lose all data... ur not the first and wont be the last so breath and take it easy.
I have a sprint touch pro, running mighty rom 4 i think. It's been working great but as of today I can't turn the device off or sleep it. i press the button on the top and the back lights for the hard buttons on the bottom turn off but the display doesnt turn off. When I hold the button to try to turn it off the prompt asking me if i want to turn it off pops up i hit yes and it doesnt do anything it just goes back to the home screen. I leave the touch pro waiting for it to auto sleep and that doesnt happen either. i have reset it many times and it doesnt resolve the issue. On maybe a similar note I've been getting messages certain programs cant be launched because there is not enough memory even though nothing is running. Also when i try to turn off the wifi it just freezes. Some one help I dont want to reflash the rom to get it to work but will if its neccesary.
Have you tried a hard reset? If it doesn't work, re-flashing might be your best option.
Well it got fixed yesterday but it still wouldnt sync up. Then tonight it stopped working tonight, on boot up it says as_starter couldnt start something about certificates. I really dont want to hard reset because i want to try to sync it up before because i have a lot of calender events and new contacts i have to transfer over.
If that's your biggest concern, use some sort of back-up program to keep all the info you need. There are a lot of good ones out here. Then, if you do re-flash, you can restore all your contacts and calender events.
Hi,
I have some problems with my HTC Touch Pro, i searched this forum, i tried everything, soft reset, hard reset.. nothing is working.
When i Slide out the keyboard lights are going on, but is not responding, nothing is working.. When i press Caps or FN the little light wont go on, so it is not working. And the Buttons on the front of the phone (Answer call, Hang up, Home, Return buttons) isnt working aswell..
I hope you guys can help me with this, again.. i searched this forum and google for a solution but nothing is working.
(sorry for my bad english)
Did you install CE-START? or a other not default software keyboard?
No i didnt install anything, but if i did install something, it has removed right? because i did hard reset.... or doesnt remove hard reset all.. maybe some registry fault, but didnt do anything about it.
i did soft reset, hard reset, pushed the space bar hard (almost broked it). i tried like everything i've found on the net. I got it from ebay so dont know what to do with it now.