Hi everyone,
I have been reading and reading for last two weeks and am very clear on how to do downgrade and upgrade my ROM but there is no information to tell me how i actually install the windows itself after i flash ROM, i need the steps to how to install windows 6 after flashing.
Thanks and please give me some answer even if you think it is stupid question.
Sam
download any rom from here.. http://forum.xda-developers.com/forumdisplay.php?f=356
( if you already have CID unlocked your wizard) then connect you wizad to pc run ROMUpdateUtility .. follow the screen instruction and you are done..
Thank you nada1
nadai,
Thank you for the quick reply, now i can finish what i starte.
Sam
One more question
Hi,
In Faria's thread in step 3 it says to downgrade ROM to 1.05 and let it go through the........how do i do that, do i connect to sync..please tell me how do i downgrade?
Thanks,
Sam
You should follow this post:
http://forum.xda-developers.com/showthread.php?t=285435
The download location for the Button's 1.05 ROM is there.
Got it working
Thanks all, i got all the steps right and it is working.
Thanks for all the good works you all do.
Sam
Related
hi,
i wanted to upgrade rom to 2006-10-05_Upgrade ROM_AKU2.3_lvsw, but when i start UPGRADE_ROM.bat it writes me ˝the system cannot execute the specified program˝.... i have g4
What i am doing wrong, please help me.
Thank you
Are there any instructions how to upgrade this rom, or any other?
tnx
Can you find more information on XDA-Wiki. You have to follow the ten steps the guys from PDAMobiz mentioned.
do i need to unlock CID?
Yes first you follow the ten steps, finally you can be able to put the ROM version you wish.
SPEEEED said:
hi,
i wanted to upgrade rom to 2006-10-05_Upgrade ROM_AKU2.3_lvsw, but when i start UPGRADE_ROM.bat it writes me ˝the system cannot execute the specified program˝.... i have g4
What i am doing wrong, please help me.
Thank you
Click to expand...
Click to collapse
Just a doof ball question. Are your running the update from your PC or your SD Card?
i am running from update from PC, is this ok? Where can i find instructions for unlockin cid? On wiki are't for 2.15.0001
I tried to unlock cid with this instructions http://en.pdamobiz.com/en/forum/PDAforum_posts.asp?TID=437&PN=1 ,but when i done first proces my phone stop at dopod screen.
Please help me because i would realy like to upgrade it to lvsw edition...
thank you
also he said you must downgrade to a specific rom first and listed the link.
read the post fully and you should be ok
i downgraded to RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID, read all thread...
allways the same
problem is with my computer. On other computer was everething fine. Somebody knows why?
thank you anyway...
Try upgrading/re-installing active sync to 4.1 or higher
i have allready 4.5
SPEEEED said:
i have allready 4.5
Click to expand...
Click to collapse
thats a BETA version, try 4.2
Hi guys i'm pretty new in this scene and i did something stupid...
i've downloaded Win Mobile 6 from usenet and installed it without reading
anything. At 95% of the installation it hangs and when i try to recover it doesnt work. Now i only have the screen with the green red and blue at the background. I've tried a hard reset but that doesnt work either and i tried to search by google and found nothing.
Am i right that i had to remove some kind of G4 lock? And does somebody know how to help me getting things started again.....
thnx in advance.
greetz
JohnGotti
do your carriers flash and let it fully finish. Once thats done, read a little on making sure your device is unlocked and once you get that done, youll be ready to move to the next level.
what your device is g3 or g4?
how do i perform such a flash and how can i see what kind of G3/4 i have??
If you got a G4 or G3 IPL/SPL 2.x:
Try flasing wizard_love rom from the bootloader screen.
If you got IPL/SPL 1.x:
flash button_rom from the bootloader screen.
damn thats a whole mouth full and i dont get it how its intended.....
perhaps you can tell me in dutch or in a language a stupid fool can understand
JohnGotti said:
damn thats a whole mouth full and i dont get it how its intended.....
perhaps you can tell me in dutch or in a language a stupid fool can understand
Click to expand...
Click to collapse
See you're private messages!
ok thank you
i have the same problem..and i've tried all versions,RUU_mUn_aRTM_10_2_0_8_WWEx.exe, Wizard_Love_2[1].26.10.2_WWE_Novii_CF2.exe, Molski[1].Biz_AKU3.3_21911_8MB_Crossbow.rar...and now when i open it, shows me for 1 second the bootloader screen, and then it's shutting down himself..what should I do???
ady_uaic said:
i have the same problem..and i've tried all versions,RUU_mUn_aRTM_10_2_0_8_WWEx.exe, Wizard_Love_2[1].26.10.2_WWE_Novii_CF2.exe, Molski[1].Biz_AKU3.3_21911_8MB_Crossbow.rar...and now when i open it, shows me for 1 second the bootloader screen, and then it's shutting down himself..what should I do???
Click to expand...
Click to collapse
You should provide more information... What phone model is this? Is it a G3 or G4? What is your IPL / SPL? What did you do before this started happening? Was the battery fully charged before you started this process? Did your PC give you errors when you tried to do teh initial flash that started this process?
The more information you provide the better we can help.
If your phone won't stay turned on when its on the bootloader (rainbow screen) then either your battery is almost dead, or you may have bricked your phone. But we need more details.
this happened to me once, i almost had an heart attack.. but anyway.. what u get there is the bootloader mode, which is you can still save the phone.. when this happened to me, all i did was, i upgraded to original tmobile rom, and from there i ve used shell tool to upgrade to wm6 (my wizard is not unlocked but shelltool takes care of that and u dont have to worry).. its really easy.. let me know what happened.. no worries
Dont worry guys... I think most of us here, faced the same things before, Me included.
Everybody here is quite nice and will help u in any way we can..
Just do some research and fact finding before u flash your rom..
One of the article that I think is very helpful to me is Dr P post on how to unlock and flash your wizard.
If you have any problem or question after reading that, just ask.
Hopefully u can find your answer and your wizard are all healthy..
mfrazzz said:
You should provide more information... What phone model is this? Is it a G3 or G4? What is your IPL / SPL? What did you do before this started happening? Was the battery fully charged before you started this process? Did your PC give you errors when you tried to do teh initial flash that started this process?
The more information you provide the better we can help.
If your phone won't stay turned on when its on the bootloader (rainbow screen) then either your battery is almost dead, or you may have bricked your phone. But we need more details.
Click to expand...
Click to collapse
my phone is G4...first, when i tryed to change the rom, on 95% was blocked..and i have wait about 20 minutes, and nothing...the spl is....01...the battery was quite full, but after several tries, i don't know now how it is (i supose to be from the battery, but i still need a very good rom for it)
ok.. here are the steps.. its very easy.. i had the samething..
your phone is probably CID locked and you will need a shelltool to install that ROM.. so what you need to do is just download the original tmobile ROM.. and connect the phone and install the original ROM.. You didnt birck the phone because you get the bootloader screen.. which means, you can still save the phone..
anyway.. connect the phone via usb and install after you install the original wm5, download the shelltool from here and follow the instructions.. and install the ROM via shelltool.. Then you should be good to go with the new
wm6.
http://forum.xda-developers.com/show...ght=CID+unlock
ok, but where can i get that original rom?
rom
ady_uaic said:
ok, but where can i get that original rom?
Click to expand...
Click to collapse
if you cant get the tmobile rom
use the wizard love rom you can get it from here http://rapidshare.com/users/EXGZ7T
flash this rom not using the shell tool once flashed the use the shell tool following all the instructions and it should work
now i've installed RUU_mUn_aRTM_10_2_0_8_WWEx.exe (i've tried and that version also, but same situation) and after reflashing, it shows me windows mobile screen, and then restart the phone...what should I do??? i've tried many roms...could someone please give me an original rom, in english?
ady_uaic said:
now i've installed RUU_mUn_aRTM_10_2_0_8_WWEx.exe (i've tried and that version also, but same situation) and after reflashing, it shows me windows mobile screen, and then restart the phone...what should I do??? i've tried many roms...could someone please give me an original rom, in english?
Click to expand...
Click to collapse
Simple: Go to the Wizard Upgrading forum and in the stickies is a post by Dr. Putingham on how to CID Unlock your device. Scroll to the bottom of the first post and there is a direct link to pull the Tmobile 2.26 official ROM.
But as EasyMob suggested (and gave a link to) you may be better off with teh Wizard Love rom since you are a G4 device. Wizard Love ROM is very good at recovering G4 devices.
mfrazzz said:
Simple: Go to the Wizard Upgrading forum and in the stickies is a post by Dr. Putingham on how to CID Unlock your device. Scroll to the bottom of the first post and there is a direct link to pull the Tmobile 2.26 official ROM.
But as EasyMob suggested (and gave a link to) you may be better off with teh Wizard Love rom since you are a G4 device. Wizard Love ROM is very good at recovering G4 devices.
Click to expand...
Click to collapse
OK..I'm agree with you, but please understand: I've tried that version too...same situation...please give me the link with the Tmobile 2.26 official ROM
ady_uaic said:
please give me the link with the Tmobile 2.26 official ROM
Click to expand...
Click to collapse
If you read my previous post, I gave you exactly how to find the link (Hint, its in the first post of Dr. Putingham's sticky in the Wizard Upgrading forum and the title is about How to CID Unlock your device. Was that too hard?
i believe you, but i can't find it...and about 3 days i'm hopeless, because with any ROM version, the phone is still restarting, after reflashing (i didn't flash it with tmobile original rom)...please please, give me the link of the topic...
hi everyone,my problem is that after uprading my pm300 it stuck into bootloader any idea on how to solve this problem and is g4 i realy need your help urgently thx in advance
What ROM did you upgrade to? If it was to a WM6 ROM using the "new" upgrade method, you may have failed to hard SPL your device. What ever the cause, the solution (as ever) can be found on the wiki.
yes you are right i didnt HARDSPL my device befor updating with (ROM
MY GREEN EDITION WM6.1)is there any hope that my phone will come back to live,by the way thx for the reply
If the device can get into bootloader, it should be possible to recover it In my previous post there was a link to the wiki page for recovering devices from bootloader. If you want any more info, I'll be happy to try and help...
thx for the quick reply but my problem now is if i connect the phone i can see the usb on the screen alright but the computer doesnt sync it and if i go ahead and update the rom i get error make sure the usb/cradle is connected properly i dont know what to do plssssssssss i need help to revive this phone thx in advance
thx mr 13v5y for your help my is alive and working like never before thx to you once again i rely appreciate the help you gave me more greep to shoulders ve a nice day
No problem! If you ever have any issues, take a look at the wiki first though
I double posted! I blame Linux!
i have read several thread but none i could understand
first, i use hermes unlock v3: it said "success". i also have fat32 my sd card and place cheeimg.nbh all by itself and place it in my treo750. can someone guide me thru the rest of the steps please. much thx
Akachay,
If you have done this:
http://wiki.xda-developers.com/index.php?pagename=HTC_Cheetah_Upgrade
and it is not working, then you need to install the hard-spl. Instructions for this are here:
http://forum.xda-developers.com/showthread.php?t=334100
Does this help you?
John
thanks john. instruction is very clear.
now i'm stuck in bootloader; it never prompt me to proceed. can u share the 6.1 cheeimg that u used plz
akachay said:
thanks john. instruction is very clear.
now i'm stuck in bootloader; it never prompt me to proceed. can u share the 6.1 cheeimg that u used plz
Click to expand...
Click to collapse
if you are in bootloader, have you already hardspl-ed ? do you see olipro.... or what text in bootloader you see...
now you can simply flash with ruuwrapper your cheeimg....
like here:
http://forum.xda-developers.com/showthread.php?t=382612&highlight=discovery
cheeimg from this thread works me ok:
http://forum.xda-developers.com/showthread.php?t=374381&highlight=fine
yeah i decided to try hard_spl method: step 1 was successful, step2 "unlock radio" everything went fine til the very end; it said error. can't seem to get past that step to get to step3. some guidance plz.
ps, my phone display windows 6.1 now so is it neccessary to run the last 2 steps?
akachay,
I got the same problem. You have to reflash with the orginal ROM so you have a proper working radio. then you can update to 6.1.
use the original desktop updater for WM6, edit the payloads.xml file, then flash the treo. then update to WM6.1 using the KaiserCustomRRU or the SD method.
akachay said:
yeah i decided to try hard_spl method: step 1 was successful, step2 "unlock radio" everything went fine til the very end; it said error. can't seem to get past that step to get to step3. some guidance plz.
ps, my phone display windows 6.1 now so is it neccessary to run the last 2 steps?
Click to expand...
Click to collapse
Yea, once you come to that error, thats when you just quit, then go on to flashing the actual rom (KaiserRUU + Rom)
then after the rom was flashed to 6.1, them just use the update radio only patch .. although I have NOT YET updated my radio, after flashing, it works fine, no dropped calls or whatever .. internet speed is great .. but i'll update this post if it does stop werking..
Hello,
I have juz download the NBH file for WinMo6.5 for Touch Viva.. can any one tell me extactly how to install this stuff...i googled a lot...but din't get any straight info...i only have the 28002_ruu_signed.nbh file.
Thank You.
Welcome aboard
Have a deep read here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Opal
you´ll find all you need.
Good luck,
Thank you
thank you...let me check..today on leave...so got enuf time to upgrade my Viva
no luck
nop man...i found nothing there about how to install an .NBH file...it juz gives the product spec and diferent ways for resetting the device.. wht i am looking for is a step by step info on how to upgrade my ROM using this RUU.NBH file...any help??
Have a look here:
http://forum.xda-developers.com/showthread.php?t=441870
And then here:
http://forum.xda-developers.com/forumdisplay.php?f=444
Hope it helps,
Thank you again
i have download the CustomRUU tool..thanks...one more question..the tool shows tht my existing version is 1.35.xxx and the image version to that i have downloaded is 1.27.xxx..
is tht a problem..i am having WinMo 6.1 Pro on my device..and this downloaded image file is WinMo 6.5.
error
n now i got an ERROR 270..says the image is corrupted...i tried download 3 times...nething like the device is locked or somthing...whn i turn on my device..its show ONBL, SPL and OS version 1.35.0000
did you Hard-SPL your Opal before flashing with custom roms?
http://forum.xda-developers.com/showthread.php?t=446446
still confused
hello,
thanx for your support. But can u give me a brief about the flashing processes..i mean the SPL and hardspl and bried step by step info..plz..
Thank You
Razeen Abdulla
flashing is quite easy, after connecting via ActiveSync... double click ROMUpdateUtility.exe and follow the on-screen directions... that's it.
if you want custom roms, you have to Hard-SPL your device first. you won't be able to flash your device with custom roms (cooked) if it's not Hard-SPLed but you can flash it with NON-custom roms (roms that are downloadable from HTC websites).