hello you guys
first of all may i say what a great help you guys have been in the past. but i messed up. i updated to another rom this dir had a ms.nbf file in it. previously when i rebooted i had an o2 logo. then after this flash i had a qtek logo. but the software itself was extremely slow. and it did not seem to clear my previous setup as i now had two of each icon. reflashing with one of rom i found here and then i had three icons of each. and suddenly i had an imate bootup splash screen. where is all this info stored and how can i clean all these roms and start fresh with one of c_shekhar's roms. i understand the the radio part and the the wm5 part but the rest is confusing. please help
wikcus
this part of the flash guide
10. Now you have to hard reset your device.
Press simultaneously: Reset Button + CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(to select items use Record Button, to change values use Camera Button)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
should delete the storage of the former rom
perfect it worked like a charm. thank you very much Rudegar. much appreciated. i have another problem still. my memory card is not working at all. it does not see it at all. im using C_ShekharAKU3.5b.R40.P24_public rom and the operating system is perfect other than the fact that my memory card does not work. but if i slide it in with the 2577 dir on it it installs the probrams perfectly. im confused it can access it but does not alow me to go there.
thank you for the help
wickus
sorry to mess you around but now it works. im fine. thank you anyway your prompt help is greatly appreciated.
thank you
wickus
BT switches off
I have this constant problem for quite some time... and dunno wat to do :-(. Apparently when I put my phone for charging, it switches off the BT after a while... and am using a BT headset as well... this happens even when iam on a call... and eventually the call gets transferred to the handset, but I cannot hear anything from my handset either... i need to disconnect the call and then continue... :-(. any work arounds... and watz the coz of the problem?
another thing... some time it shows that I have multiple storage cards... there are images of the same storage card in the explorer... think I had seed a max of 4 images at once... any idea watz the prob and huv to fix it?
thanks in advance...
hi all.
I am in serious trouble and i need help. i realized i did not have outlook, thus my contacts are all gone.
I had tried to update my software earlier by installing some .cab file. It was a file for my HTC home. The installation was 'successful', however after i did a reset ( they prompt me to ) i could not boot up my phone. It get hanged once it got to my wallpaper, and i cant tap or press anything. The htc home screen also does not come out.
=(
any kind souls?
So something is hanging right after windows boots... did you try to install HTC Home to a storage card? Try booting with the storage card out.
thanks for the prompt reply. i tried, however it never seems to work. I am using a HTC TYTN ii. running on windows 6.1
I did install it on a storage card. i tried means like switching on without memory card, sim card and did a million resets, but it doesnt seem to work.. =(
Actually i install the HTC Home was because the message counter on the HTC Home got screwed up. it showed 1 unread no although i had all messages read. but anyway, for now, tht's not my main concern.. =(
thanks all in advance ..
I guess I do not understand all of your issues besides the freezing at boot.
A hard reset should be an option, if you're ok with that... and then for the future, use sprite and pim backup to make sure you don't lose too much data.
Try searching the forum for threads like http://forum.xda-developers.com/showthread.php?t=320689
What caused you to lose your contacts?
my contacts are all saved in the phone, and it wasnt back up cause i am not using microsoft outlook.. and lets say i want to do a hard reset, how to do it?
and how do i do a soft reset with my phone.
Is there anyway that i can actually do a SAFE mode boot up? but my phone keeps getting hanged at start up. i dunno if its because it cant bring up a pin enter mode where I need to key in my pin each time i boot up.
0) What version of ROM were you using?
HTC TYTN ii
1) Applications installed when it happened
HTC HOME (old version ) i d/led and used HTC Diamond home, then it got screwed up cause the unread messages kept showing 1, although all messages were read. i thus wanted to reinstall the HTC home.
2) Radio ROM version (2.19.21, 2.47.21, etc...)
NONE
3) Device model (dopod 818, imate etc...)
HTC TYTN II
4) Device version (G3 or G4)
Windows 6.1?
5) How long it was since last hard reset (1 day,6 hours, etc..)
I never did a hard reset. how do i do it
6) Approx how many soft resets you already made (1-5, 5-10 10-15, etc...)
Soft refers to poking the reset button, would be more than 20 times after this issue
7) Approx how many shutdowns you already made (holding power button for 4+ seconds)
more than 10 times.
8) any other significant info you think will help:
My contacts are not saved syn with my com as i do not have windows outlook.
9) Do you have the HTC Homeplug today plugin enabled?
10) have you populated your PIM apps via pimbackup or via activesync?
11) Do you have the "HTC_default" today theme enabled?
yes.
for now, i cant boot up. the screen will hang at my wallpaper. i cant seem to press or click anything after that. My pin start up prompt does not apear too. please help =(
depressed ivy.
Sorry, but I'm pretty sure you need an app to use safe mode. You might need to loose your contacts, but don't give up... research and you might find an answer.
http://wiki.xda-developers.com/index.php?pagename=The%20Safe%20Mode%20Bible
And if you've already tried booting without a sim and storage card, you might need to hard reset, which is easy enough after reading the wiki.
e.g. press both softkeys while resetting, or you could even flash a new rom via sd card by naming the .nbh file KAISIMG.nbh and putting it on your storage card root directory.
Read the wiki before you make any decisions and good luck, good news is your phone sounds like it's fine, just install a safe mode program next time.
Hi. I did research like wht you adviced, i managed to log into bootloader mode, i downloaded MTTY program and got my phone to the USB mode. I like to ask the following:
1) can i retrieve and save my contacts as i saved them all in my phone and none in my sim card?
2) Wht can i do next as I'm badly stuck at the HTC home page with only my wallpaper, i cant click on any buttons.
Thanks in advance to all.
I really hope that some GURUs here are able to help solve my terrible situation and i would really appreciate it. My contacts are all save in the phone and i need some help in retrieving it.
Thanks all.
asdfgh123 said:
I really hope that some GURUs here are able to help solve my terrible situation and i would really appreciate it. My contacts are all save in the phone and i need some help in retrieving it.
Thanks all.
Click to expand...
Click to collapse
At what exactly point does it freeze?
What is your radio version, it should appear after you turn on the device in red letters on the bottom right.
What is your SPL Version, you should be able to see it from the bootloader?
Dave
Hello friend. When I suggested research, I meant things like this...
http://forum.xda-developers.com/showthread.php?p=2732337
I found this thread by clicking search in the top right to use google, and typed "save contacts" which if you've gone into MTTY research (be careful by the way) then you might be able to backup your data.
MY SPL : 3.29.0000
MY radio: 1.65.16.25
When i boot up, i suppose to have some password protect, to enter my pin before there is reception and stuff. For now, I can only see my wallpaper, the start button, contacts and calander buttons.However i cant touch on anything, it just simply hangs there.
SIM card and memory card are off. I tried SYNC, but it says cannot detect device.
=((
asdfgh123 said:
MY SPL : 3.29.0000
MY radio: 1.65.16.25
When i boot up, i suppose to have some password protect, to enter my pin before there is reception and stuff. For now, I can only see my wallpaper, the start button, contacts and calander buttons.However i cant touch on anything, it just simply hangs there.
SIM card and memory card are off. I tried SYNC, but it says cannot detect device.
=((
Click to expand...
Click to collapse
By "SYNC" you mean active sync? Try an Actice sync re-install, maybe?
Sounds like this protect stuff is beggared.
Ta
Dave
i meant active sync, it says it cant detect my device. Is there anyway from MTTY, i cant retrieve my contacts?
All this actually happen after i installed .cab file the other day, and the installation was fine and i was prompt to restart. It hanged after that till date. sigh =( I'm desperate.
GURUs,
I cant get my device to go any further than hanging right at the wallpaper of HTC Home, the usb doenst recognize my device, so i cant enter or do any thing.
I just wish to retrieve my contacts now, and do a hard reset on my phone.
Thanks.
If you never saved your contacts from and to your sim card without any kind of backup from outlook or pim, etc. you might be ****e out of luck. Gone from a ****ty samsung to a equally ****ty razr, hermes, and now kaiser with the same sim...Always copy your contacts to the sim; or at least a Backup folder on your desktop or lap. flashing erases the main memory, which of course includes contacts. That's why we have a program called sim manager, to backup contacts everytime we erase our systems. Hope you find a workaround though, as a former Iphone owner, reinputting your contacts is a giant *****
sigh.. does tht means i'm so dead now? I did ever did a PPCPimBackup, but its stored in the phone memory too? any sort of help you can assist?
asdfgh123 said:
sigh.. does tht means i'm so dead now? I did ever did a PPCPimBackup, but its stored in the phone memory too? any sort of help you can assist?
Click to expand...
Click to collapse
Possibly, I've tried to get hold of someone who might know, but it's looking grim.
Storage Card backups and Active Sync are the best way to backup.
*DaveShaw closes barn door after the horse has bolted *
Ta
DAve
I am posting this here since there seems to be way too many threads around here all saying the same thing diffently yet in NO clear way that everyone can understand. I spent 2 days trying to recoved a Prophet from a bad flash.
Symptoms
Prophet stuck in Bootloaded (Tri Color Screen)
Prophet stuck in 2nd Splash (Usually Your providers Splashcreen)
Solution Read as (This is what I did to fix it)
Download a WM5 Prophet\Wizard Official Rom (I still own a Wizard so I used the K-JAM_WWE_216901_2169101_020710_ship rom, the devices are very similiar concerning chipsets with the hardware keyboard seeming to be the biggest difference)
Extract the Rom (if it is distributed in an exe format with a tool like Winrar or 7zip)
Download the Prophet Tools Light package and extract to any folder . This contains both G3 and G4 RUU's (I can confirm this worked on a G4 Device)
Place the Official nk.nbf in the \Utils\Flash folder
Drop the phone into bootloader (Tri Color Screen) mode and connect to PC via usb.
Allow a few seconds for the usb connection to settle and run the RUU specific to your device.
DO NOT TOUCH the device or PC at this point. If your pc is a tad slow, go make some coffee and watch an episode of Big Bang Theory
This should now give you a shiny new (or old ) rom that is bootable which will allow you to upgrade your Prophet to any of the pretty WM 6.1 roms available.
Just a little tip:
If you are worried about messing up the device again use Alternate "Lazy tool" by dioxda. Its easy and it works !
I couldnt make this process any clearer if I tried
heeey...sorry but after this my prophet go death... i cant turn it on, and i dont know how but it seems that i cant charge it no more...
is death... can anybody help me how 2 fix this?
P.S.sorry if my eanglish is not very good.
specto13 said:
heeey...sorry but after this my prophet go death... i cant turn it on, and i dont know how but it seems that i cant charge it no more...
is death... can anybody help me how 2 fix this?
P.S.sorry if my eanglish is not very good.
Click to expand...
Click to collapse
Strange this worked perfectly for me, but when I tried updating to a different rom I got the same problem you are facing now. Just a quick flash on the screen and blue and red LED flash. If I plug it in it just sits there flashing the whole time. I am looking into this as soon as I get a solution I will post it here. Any help guys ?
cornelha said:
Strange this worked perfectly for me, but when I tried updating to a different rom I got the same problem you are facing now. Just a quick flash on the screen and blue and red LED flash. If I plug it in it just sits there flashing the whole time. I am looking into this as soon as I get a solution I will post it here. Any help guys ?
Click to expand...
Click to collapse
Recovery
http://forum.xda-developers.com/showthread.php?t=401326
If at any stage your Prophet fails to start properly or can only enter bootloader follow this:
* Download and install the latest version of ActiveSync (Google for it)
* Download and unzip an AKU2.2 (No Vendor) ROM for the Prophet-any AKU 2.2 will do-from [here | ftp://xda:[email protected]_NVID.exe] or [here | http://wiki.xda-developers.com/index...=Prophet_ROMs]
* Within ActiveSync DISABLE connect through USB (Tools->Connection Settings->Uncheck Allow Connect through USB)
* Put the Prophet into bootloader mode (hold the camera button and insert the stylus into the larger hole next to the power socket)
* Plug the Prophet in via USB
* Run the RUU specific to your device (G3 or G4) from the AKU2.2 folder. If there is only one RUU, use that.
* When it has finished: disconnect the Prophet, and then re-enable the connect through USB in actyivesync before reconnecting the device.
==> if success, will going back into WM5 and then u can use the Lazzy Tool, look at http://forum.xda-developers.com/showthread.php?t=353547
choose WM 6.1 ROM, after u doing that step, u already done with the WM 6.1 SEMOGA SUKSES!
yes it works again ...
Help, please?
Hi guys,
I have a slightly different problem. When I turn on my Prophet, it is in bootloader mode, so I take out the battery, leave for 3 seconds, put the battery back in, turn on the Prohpet.
Bootloader is displayed
Plug into PC with Active Sync 4.5 running (USB disabled)
Windows makes the 'new hardware connected' sound
RUU shows USB in bottom corner
Run the NVID no vender ROM,
Agree to first screen
Agree to second screen
Click Next
Prophet turns off
Windows makes the 'hardware disconnected' sound
Argh
No Prophet, no phone - incommunicado!
When I turn the prophet on now, I just get the bootloader, then it turns itself off after 10 seconds.
Could it be a low battery? - How do I charge it? I have left it plugged in to the power all night!!!
Could it be a faulty phone? - I have been having random resets over the past 3 weeks or so and thought that it was the WM6.1 rom installed, so was trying to put WM5 back on to see if that helps. - I am beginning to think there may be something wrong with the device?
I am trying a few more things from this forum before giving up and buying a new windows smartphone!
Any help would be apreciated!
Regards Mike
Guess it could be a power issue. - I got further just now by using a powered cradle instead of just a usb cable, but still reset at 80% complete. Will leave the phone charging using a wall charger only for an hour and see how i get on with that!
Its Fixed!
Ok,
So it turned out to be a low battery. - I charged the Prophet up for 1 hour and then ran the re-flash and it worked perfectly.
Now I just need to get the Orange rom back on it so its back to normal - Not faffing with WM6.1 - will stick to WM5 as its much quicker and works!
Maybe I was a bit too fast in posting the problem!
Thanks
Mike.
hi go to the htc website www.htc.com
then go to support then Choose Your Product then HTC S710 - Operating System [ROM] Update you must enter your phone Serial Number and download the rom update
first you must remove the storage card then press and hold the cam button then press the power button then you will see the color screen let it on
then Connect a Phone to a Computer Using a USB Port you must flash your htc_s710 with the rom update It works!!! Try it out!
xlover4x said:
hi go to the htc website www.htc.com
then go to support then Choose Your Product then HTC S710 - Operating System [ROM] Update you must enter your phone Serial Number and download the rom update
first you must remove the storage card then press and hold the cam button then press the power button then you will see the color screen let it on
then Connect a Phone to a Computer Using a USB Port you must flash your htc_s710 with the rom update It works!!! Try it out!
Click to expand...
Click to collapse
Should a valid simcard be inserted in the device ?
no, you dont have to insert a valid simcard...just tried it out
It did not work on my phone, but I think that this device is definitely dead...
I doesn't matter too much as I bought it to for pieces...
vox hangs at wm6 screen. soft reset fails. extract contacts before hard reset?
yes, i would love to get my htc vox back by hard resetting (flashing the rom), but my contacts are not backed up (yes groan, but ...* see bottom if you care/have time...) So, i want to transfer the contacts data out of my vox, without wm6. go on, mission impossible was a great flick, we all want to be tom cruise (except I'm not sure about the scientology stuff..)!
1. is it possible to go to the (green blue red screen) SPL stage (i.e. hold camera button press power on) and then via the laptop send commands to the vox to copy data from the built-in memory to the storage card?
my parallel is that a PC has a simple operating system 'ms-dos' which can be used to obtain data and get the computer back online if windows fails. This requires programming in the lowest level (os) language of vox, I understand it uses an ARM chip (http://focus.ti.com/general/docs/wt...lateId=6123&navigationId=12000&contentId=4679). ARM/HTC websites refer to having 'windows embedded CE 6.0' but since my vox's bootloader does not finish loading wm6, I guess wm6 never gets fully installed into RAM so is not usable in this case. so...
2. has anyone tried this before? Anyone know a link to the command list for the vox's operating system? Any tips/corrections to the above?
Other relevant points, required for this solution to work:
3. what is the name (and do i also need the memory location?) of the data file containing the outlook contacts data?
4. does the HTC RUU ROM update actually install all the standard issue software, as well as WM6, including the ability to save Outlook contacts? link to software pack?
Thanks in advance..
(* - I dont have outlook on my laptop and was not aware until after the event that a work-around exists, yes my vox froze once before and when i checked that work-around was not developed.. (last time a soft reset removing the SIM and storage card did the trick. no such luck this time.))
Hello this is my first post I'm writing because I'm having trouble putting Hard SPL
on my ATT Fuze. I have XP and I connect the phone to the computer and sync it
then open the SPL program go through the prompts then my screen on the phone turns off, the phone I believe also turns off and I get the error 260 a screen pops up on the computer saying it found new hardware. Any help with what I'm doing wrong would be greatly appreciated.Im kind of freaked every time I get up the nerve to do it and think I bricked my phone.
Did you install Microsoft .NET Framework 3.5 first?
Here is the link to follow steps incase you didnt see it.
http://forum.xda-developers.com/showthread.php?t=448008
Hey thanks for your help after further reading I know I should have posted this in the right section and yes I have framework 3.5 installed I guess one question would be that I installed 3.5 to the computer do I install it to the phone? Also I have been reading the hardspl post I think one of the ideas is to first install the SSPL manual
to the phone is that correct? Then do the hard spl? If this is corect what do they mean by install it? run it? active sync? sorry just want to get this right
This is from memory - so if i miss something, sorry!
You shouldn't get any error messages when you connect your phone to the pc, regardless of what boot state the phone is in.
The manual jump SPL is to be used if your phone doesnt enter the correct state automatically from the RRU.
If you want to use the manual jump SPL, do this:
1) Connect your phone to the PC (ensure it can sync correctly - no connection errors)
2) Copy the SSPL_manual to the phone
3) (on the phone) run the SSPL_manual file
3b) Phone should now go to a blank black screen
4) Run the RaphaelHardSPL-Unsigned_190_1_3.exe on the PC
4b) Follow the PC on-screen instructions
**However**
you say that the phone turns black / screen off when you run the exe normally - this is supposed to happen. You shouldnt get an error here. (this screen off part is what the manual SSPL is going to do anyway).
**
If you still get problems, ensure you are connected to the computers USB port - not via a USB hub, take the SD card & sim out the phone. Maybe try a different PC, different USB lead - always make sure you are following the instructions very carefully - and if you still have problems, let us know & we'll try harder! - remember to tell us everything, if you try 2 leads - tell us! If you get something different, tell us what! You can never give too much technical info when asking for technical help - and the more you have tried, the more interested others become (we all like figuring out a problem!)
Beeble
Thank you so much for your help just to give you an update either way I do it
Manual SSPL or just run the Hard SPL by itself the screen goes black and I know
thats what it is supposed to do. Just to clarify at first I did not know the screen was supposed to go black so thanks for that. Again either way it disconnects and a screen comes up saying it found new hardware from that point at first I was scared to do anything else but but eventually I just clicked YES install the hardware hoping that after I did that it would not disconnect but even saying yes to the Found new harware it would say it could not install any hardware and I'm stuck
from there still getting the error
Again I cannot say enough how helpful people have been even if I have not been able to get hard spl on the phone yet