Database Info

Magician stock in bootloader mode (I've read many topics)

post

Magician stock in bootloader
Hi J-A-J-O,
I get the same error like you shown on the pic.
Do you have a solution already for this problem???
Plz. help me.
Thnx.
Alfa156

Unfortunetly no I'm gonna leave PDA without battery tonight and see what gona happen tommorow - if this will not solve the problem i will send it to service centre.

try this
I was upgrading when my computer had a blue screen and completely crashed. Try getting into the bios, by pressing, camera+power+reset at the sametime, and then try to run the installer again when you plugged it in the computer. Don't know if it will work for you, but it worked for me.greets
tom

I'm in the bootloader mode, but I stock here! Windows recognizes PDA, but flashing software shows that what on the image and then can't connect to the device.
I mean, I can see olny USB/Serial at the top and 1.02 at the bottom

J-A-J-O said:
I'm in the bootloader mode, but I stock here! Windows recognizes PDA, but flashing software shows that what on the image and then can't connect to the device.
I mean, I can see olny USB/Serial at the top and 1.02 at the bottom
Click to expand...
Click to collapse
I've met this status few days ago. Do you install activesync on your computer? If no, try to install it and re-plug your PDA phone. Run update ROM program to see the status change or not?
I use Dopod818_1110_153_11100_Ship.exe to upgrade my PDA. It is traditional chinese version. Just FYR.

A have ActiveSync v 4.00 b4343, when I run rom update program, ActiveSync icon hides - so I can say that is king of status change Of course active sync still shows that phone is not connected. But when rom update program ends it shows error 201 - i have used those rom already:
MA_TMUK_11300_128_11200_Ship.exe
NL_11300_131_11200.exe
WWE_T-Mobile_1.13.zip
WWE_10600_158_10600.rar
WWE_10600_110_10500.exe
Every single started with standart MaUpgradeUt and MaUpgradeUt_noID but problem still exsist. Normal MaUprageUt can't connect to the phone, and MaUpgradeUt_noID shows status like on my image attached on the top, and after I prase upgrage and leave phone for 2 hours nothinh happens, it only displays "Checking information of your device"

stock in bootloader
Hi J-A-J-O,
I had the same problem like you and i found out that it's maby the battery that is the problem.
You must have a battery that is charged well.
When it is not charged this problem might occured.
I want to try this but i don't know how to charged a battery when you don't
have a'n OS installed on the Pocket PC.
Perhaps somebody can tell me this??
Thnx,
Alfa156

You might be right, I remember that battery was charged around 30% when I stardet to flash. Now when I'm trying to charge the phone, indicator dosn't shine and phone dosn't getting warm, like it was always be when i plug the charger...
And damn, i don't know anybody, who has magician, so I can't borrow charged battery - maybe there's way to charge the phone when it is in bootloader mode?
Could somone help us?
EDIT: Ok, so I knew some new facts. The battery couldn't be charged in the bootloader mode, but somone from polish forum told me that he has scheme how to connect battery directly to charger. When I charg battery and check is that the reason of my problem, i will write in this topic
PS. Sorry for my english

post

Hi J-A-J-O,
Can you tell me what the additional steps are?
After i put the back cover on what is than the next step to do.
Have succeed to charge your battery?
without any OS on the Magician.
Thnx,
Alfa156
By the way did you already got the scheme for charge the battery directly from the charger.

Yes, I have charged the battery directly from charger.
This method was invented by Jasse from PDAclub.pl, BIG THANKS to him
Scheme is in the attachment. You need some charger, it must be between 3-6v. Cut off the plug, then connect red cable to minus, and black/white or other to plus. Hold the cables in that position for 2-3 minutes then try to flash. Remember: If battery will get too hot disconnect it immidietly.
YOU DOING THIS AT YOU OWN RISK

Hi J-A-J-O
I met the same problem. And I did what you mentioned to charge my battery. the model is PM16A. But seems it did not work. Could you paste the original link of this topic? What kind of charger did you use to direct charge this battery?
P.S. I'm using dopod 818.
Thanks.

I fixed it.

How did u fix it?

BMaster,
I remember that I used a wire to short-cut 2 or 3 pins, then put the battery in, and plug the charger, this will cheat the system that it looks like the battery is full. Then you can flash the it with a good rom. It has been passed a long time, I have to try it again so that I can tell you the exact pin number.

problem with flashing under WM6...

Hi everybody,
i have flashed the WM6 underground edition a couple of weeks back. Now i wanted to downgrade to WM5, but without success. I am using IPL/SPL 2.21. After starting the ruu upgrade software the Wizard switches to boot mode. So far so good.... But then nothing happens anymore and after a minute or so the software quits with error 260.
Any hints what to do ??
I have the newest Activesync installed.. I even cannot flash any other Wm6 rom.
Any help would really be appreciated !!!!
Best regards
Batman08

When you reboot your phone, post exactly what version IPL and SPL you see.

Didn't someone once post that there was a difference in USB cables....Grasping at straws, but just a thought!

Hmmm... do you hear the active sync connection bell ring when it reboots into bootloader? At the bottom of the screen, do you see the letters USB near the left hardkey?
Might try another PC, or even a different USB port on the same machine. Sounds like the USB is acting up.

After the phone reboots i can see IPL/SPL 2.11.
I can hear three bell rings with the same low frequency. To
me that is not correct as the connection bell ring should be two tones ?
I can see "USB" on the left side of the Wizard's screen.
I also tried different cables, but no success.
I am using WIN XP with SP2. Upgrading worked flawless
some month back with WM5.
The only thing i had to change was ActiveSync 4.5 as WM6 is only
supported there.
Any hint ???

batman08 said:
After the phone reboots i can see IPL/SPL 2.11.
I can hear three bell rings with the same low frequency. To
me that is not correct as the connection bell ring should be two tones ?
I can see "USB" on the left side of the Wizard's screen.
I also tried different cables, but no success.
I am using WIN XP with SP2. Upgrading worked flawless
some month back with WM5.
The only thing i had to change was ActiveSync 4.5 as WM6 is only
supported there.
Any hint ???
Click to expand...
Click to collapse
ERROR [248~260] : UPDATE ERROR
This error occurs when there is an “open port error” before upgrading the CE ROM image.
Solution: You can reset the device and run RUU again. If you still encounter an “OPEN PORT ERROR” again, reset your computer and try again.
This is taken from the redme inside the RUU
Good Luck

Put the phone into bootloader mode, kill WCESCOMM.exe from process list, attach Wizard, let it install driver, open up RUU and (hopefully) flash.

Also make sure you pull out your SD card while you try to flash your phone.

@neonkoala:
You made my day !!!!!!!! it worked flawless.... Thanks a lot !

Dead Prophet? Problem with flashing? This could help you!

Hi,
I just crashed my phopret. BUT due to some good ideas of user Users i solved my issue. I want to tell you how.
My history:
I already had the "update package" installed and used several WM 6.1 ROMs.
I love the Diamond rom from vincent. see link
Then i tried to flash my prophet with a rom for the charmer. Hm, bad. It crashed when it tried to restart. Anyway.
I tried to reanimate it. It failed. I stopped for that moment and started again a day after.
Now it runs again. Juhu. I tried every update , orginal ROM, Tera Term etc. But always the same issue:
Bootloader starts but only runs until info screen with the isp number etc.
"The Charmer rom erased everything so there was now Operating system at all."
Even the bootloader was not the original one with 3 colours and I was not able to connect to the PC because it stopped booting.
How to solve this issue:
Download the "Lazy Tool" from here
If you need additional info read this otherwise try it my way
Flashing Tool thread
1. Press Camera Button and Softreset (with stylus).
2. Remove ONLY the Stylus. --> Get the 3 Colour Screen.
3. Connect with Cable to the (this important) USb Port at your Mainboard (native ports).
4. Unpack it.
5. Run "Upgrade.bat" and keep the window opene in the Background
6. Go to "lib" and run the G3 or G4 "Rom update utility"
7. follow the introductions
Finish. You did it. Great job.
To get a good Rom.
Use the update utility and run after a reset the vincent rom.
BE ALWAYS AWARE THAT YOUR PROPHET IS CHARGED. Mine wasn´t once and i wondered why it always restarts again.
Some nice progs are:
Slide 2 View (Album like on the iphone)
Slide 2 Unlock (unlock like on the iphone)
Icontact (contacts like on the iphone)
Touch Response (get a vibration by pressing a button)
G Alarm (good alarm in the morning)
BT Remote (to remote powerpoint by bluetooth)
Thanks to everybody who develops nice tools like the "lazy tool" and shares his/her experiences with WM. Good job Friends.
Greatz,....

I feel like an idiot :(((

I recently (few days ago) bought my S710 (a.k.a. Vox) and it came with the WM5. So I found this forum nad Dr.Gonzo's thread about WM6.1 ROM (http://forum.xda-developers.com/showthread.php?t=384129), DL-ed the necessery sofware and followed the instructions (which seem to me like a peace of cake )
For some unknown reason I cannot finish the flashing of WM6.1, when I have to run the RUU I start the instalation, and after a minute or so (when the progress meter appears) the software says that the device is not connected. I tried this several times, always with the same problem.
what am I doing wrong? Please help me, so I don't feel like described in the subject of this thread.
P.S. and sorry if I made any gramatical errors, english is not my native language.

rbojan said:
I recently (few days ago) bought my S710 (a.k.a. Vox) and it came with the WM5. So I found this forum nad Dr.Gonzo's thread about WM6.1 ROM (http://forum.xda-developers.com/showthread.php?t=384129), DL-ed the necessery sofware and followed the instructions (which seem to me like a peace of cake )
For some unknown reason I cannot finish the flashing of WM6.1, when I have to run the RUU I start the instalation, and after a minute or so (when the progress meter appears) the software says that the device is not connected. I tried this several times, always with the same problem.
what am I doing wrong? Please help me, so I don't feel like described in the subject of this thread.
P.S. and sorry if I made any gramatical errors, english is not my native language.
Click to expand...
Click to collapse
you should firstly uspl your htc s710!(first treath) do do this its necesary that you app unlock your vox(as described in uspl treath) then you can update to any rom!(made for your device!)

...let me explain...
Like in the manual, first I rebooted (hardware reset) the device, then run SDA application unlock, soft reset, copied the necessery files to the root directory, run heret.exe through the .bat file.
the penguin appears on the screen for a short time, then the screen goes dim (like described). this is the moment I should start RUU, which I do, but one of 2 things happen:
1) either the RUU doesn't even recognize the device, and reports to check USB cable. The screen remains dimmed,
2) or it recognizes it, shows the USPL-vox on the device and starts update. At the very begining of update (zero or two %), it says that the device is not connected. the vox screen shows some info, and it's three-colored - blue, green, red (if I remember correctly). the RUU software exits, and then I hardware reser the device, to make it functional, but still with WM5.
what am I doing wrong?
EDIT: It's actually WM6, I needed a program to tell me that

Seems like your USB port on the PC is not working properly with the Vox. Try another Port or better an other PC to execute these tasks.
Could also be the cable - this may be easier to change.

I don't think that is possible, it's the same cable I use for connecting through ActiveSync and it works flawslessly. Any other ideas?
it's a standard USB-miniUSB cable I use for my old motorola mpx200 and my camera, don't beleive there can be a problem there?

Just try it - AS transfers a few bytes - a ROM is several MB. This is no proof.
Windows (ROM Update) also talks to the USB port in a different way than AS, so why not eliminating all parts that are outside the device (you have no other choice anyway).
- new/other USB cable
- new/other USB port
- new/other USB controler (e.g. other PC)

Can you not upgrade new rom from htc site?

wm5 ROM for a bricked Cingular 8125 G4 Wizard

Good day.......
I am mailing out of real frustration.
I don't know if this is allowed.
I collected a cingular 8125 from a friend in the UK.
I noticed on starting up that there was Tmobile screen first before the windows mobile screen starts. I had no problem with the fone until i realised that i couldnt connect to my local networks GPRS service (who uses a phone that can't browse)
After scanning thru the site, i decided to flash the phone with Crasing's WM6.5 ROM after doing a HardSPL and i could browse and it was the perfect phone apart from the fact that it was real slow and hangs attimes.
It got worse so i got fed up and decided to revert it back to the original ROM and sort the browsing stuff with a network fix that someone on this site had told me.
I reverted the hardSPL and on installing the Tmobile ROM, it brought out an error message, tried with the Cingular ROM same thing.
So i tired reflashing by using a software called Flash Center and it started and stopped at the 1%.
Restarting my phone just shows me the bootloader screen and i have been battling it constantly for 3 weeks but to no avail
I have read almost all forums here, done almost all they ask to do, but nothing.
The only ROM that worked on it is the WIZARD love ROM but it using exactly 21mins to start up. Thot of downloading Faria/Molski WM5 ROM (cos i sorta prefer going back to WM5) but the links for their downloads are dead.
Please help/direct me to where i can see help cos i really need the phone like 2 weeks ago. I am most definitely depressed now.
Thanks.

Check here for all HTC Wizard WM5 OEM shipped ROMS. The one for Cingular is listed in there.
http://forum.xda-developers.com/wiki/index.php?title=HTC_Wizard_Windows_Mobile_5.0_Shipped_ROMs
You say the phone is a Cingular (G4 DOC version). Does it look like this one (click link ... http://www.brighthand.com/assets/4811.jpg ) with the Cingular logo on top left, etc?
Did you require the HardSPL to be able to flash to new ROM, or did you just use the SIM / CID unlocker using the Wizard Service Tool (note the Wizard Service Tool will only work for G3 DOC type device, not the G4 DOC devices)
You said you also removed the HardSPL. If you removed the HardSPL, then you can only flach the OEM ROMS (i.e., if yours is Cingular, then you can only flash the Cingular Stock ROM ... check link above and use Cingular 2.25 (click here ...
... http://www.4shared.com/file/BJUEhCC9/RUU_Wizard_Cingular_8125_WIZCN.html )
First do a battery pull, replace battery, then start device in bootloader mode (i.e., press and hold Camera button on side, then using the stylus press and release Reset button on same side. Do NOT power up the unit by trying to turn on using the Power button on top). Take note of IPL and SPL version that shows up on Bootloader (3 colour) screen. Then plug in USB and try re-flashing with Cingular OEM ROM.
After successful OEM ROM you can then try HardSPL again and re-flash to other ROMS. There are plenty of cooked WM5 and WM6.1 ROMS out there. The WM6.5 is too much (I think) for these devices. A neat clean simple WM5 or WM6.1 with overclocking works very good.
Regarding your settings for ISO, GPRS, WAP etc. you can look for a Netwrok Wizard cab file, and install ( heres the newest I could find ...
http://forum.xda-developers.com/attachment.php?attachmentid=121023&d=1223800573). This will install 6 files into the root Windows directory of the phone. Reboot the phone and you will notice the Network Wizard icon show up in the Settings/Connection control panel.
One of the files it installs is called provision.zip. You will want to update this by copying the following to the windows directory overwriting the old one. This contains all the settings for your phone. Once you copy this over, click on the wizard in the Connection Settings control panel, and it should give you options for Country and Cell Phone carrier/provider. Click away and it shoould automatically set up the correct info for WAP, GPRS, ISP, MMS, etc.
Good Luck. Let me know what happens.

WOW
Thanks for the response
I used the HardSPL to flash the new ROM.
I removed the HardSPL and the Olip in my IPL was changed back to the 2.26.0001
I tried the cingular 2.25 ROM but it says it wasn't meant for the device and most times the RUU doesn't recognise the phone. Tried the Tmobile 2.26 same thing.
Also used crossbow WM5 AKU2.3 and AKU3.3 ROMs they worked but fails at 96%
The only ROMs that worked is Wizard Love ROM but it spends about 20mins to get to the part where it asks you to align screen and it doesn't move from there
Thanks for the info on the WM5/WM6 also the network wizard cab file. Really hope that phone works
I'm a pretty desperate guy right now cos i use the phone to trade and money is moving, she(money) is a *****

WOW
Thanks for the response
About the pix you reffered to? Yes thats exactly how my phone looks like
I had used the HardSPL to flash the new ROM.
I removed the HardSPL and the Olip in my IPL was changed back to the 2.26.0001, SPL 2.26.0001
I tried the cingular 2.25 ROM but it says it wasn't meant for the device and most times the RUU doesn't recognise the phone. Tried the Tmobile 2.26 same thing.
Also used crossbow WM5 AKU2.3 and AKU3.3 ROMs they worked but fails at 96%
The only ROMs that worked is Wizard Love ROM but it spends about 20mins to get to the part where it asks you to align screen and it doesn't move from there
Thanks for the info on the WM5/WM6 also the network wizard cab file. Really hope that phone works
I'm a pretty desperate guy right now cos i use the phone to trade and money is moving, she(money) is a *****
PS: My IPL/SPL is 2.26.0001

OK. Good info.
Not sure how you did it but somehow you managed to get the T-Mobile IPL/SPL on it, and yet it still recognizes it is Cingular. For one reason or another one aspect does not let the other load and vice versa. ????? Hhhmmmnnn ????
Here is what I would try.
1) I have attached a zip file called SoftSPL. Inside I have made an image file nk.nbf, which contains ONLY the 2.25.0001 IPL and SPL for the Cingular 8125.
Unzip this folder to your Desktop and then try to run only the "newromupdateutility_wizard_noid.exe". Remember, start the phone up in bootloader mode, connect via USB then run the "newrom...exe" file. If you get an error right away saying this is not the right update utility for the phone or something like that, then start over ... i.e., disconnect phone, pull battery, start phone in bootloader mode,reconnect via USB, but this second time try using the one called "2.exe". I found sometimes when I flashed ROMS the first one did not work and the second one (2.exe) did for me.
IF this works, once you get the 2.25.0001 IPL and SPL showing on the bootloader screen then start again (pull battery etc. same as above) but then re-flash back to the original Cingular OEM 2.25 ROM that you tried earlier (the original RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1.exe). Try this and let me know how it goes.
If and when you get it back to the original Cingular ROM, if you get to this point, you can then start back like it was when phone was "new". It will still be SIM unlocked so you can use any carriers SIM card but you cannot flash other ROMs.
If you are going to try other ROMs, re-apply the HardSPL, but make sure you only use ROMs that have been cooked, say they are safe for G4 devices and do not have IPL/SPL in them. This means when you have it HardSPL'd you cannot, or should not use other carriers OEM ROM's such as T-Mobile 2.26 or 3.08.
Lastly, if you do like some of the "extra's" offered with WM6 or higher and do not like a slow phone and want to keep it fast like a WM5 ROM, then stick to either WM6.0 or WM6.1, clean (or what they call Vanilla) ROMs.
Good Luck. Give feedback of how it works out for you and pay attention to errors and messages and IPL/SPL etc. for reporting back and I can help you a little more.

Another thanks again.
I really owe you if and when my phone is finally done cos i think i am getting there.
But i successfully changed the IPL/SPL but on flashing the cingular ROM it says the RUU cannot see my phone and once it sees that it says the update utility cannot be used for my phone.
So what next?
Maybe the ROM is not the right one but i ensure it was meant for g4 tho"
Tried MUN-RUU but to no avail
Eagerly waiting your reply.
Thanks again

OK. YES. You are getting there.
You say the phone is now IPL/SPL 2.25.0001. It shows this on the 3 colour bootloader screen?
What did you run in order to flash; did you run the "newromupdateutility_wizard.exe", or "2.exe", or did you need to run the "START-sSPL.exe" to flash th nk.nbf file I made? (I don't think the "START-sSPL.exe" works from the bootloader screen...phone has to be booted to working status).
Here's what is next. I made a new nk.nbf which is the Cingular 2.25 OS, splash screens and 2.25 radio only. I removed the IPL/SPL and the Extended_ROM, and cooked this back to nk.nbf.
Download it from here .....
http://www.fileswap.com/dl/7WhstX82/nk.nbf.html
..... and copy this to the folder you made of the SoftSPL earlier (overwriting the other nk.nbf - you may want to save that as a back up)
Now try flashing this new nk.nbf again as you did for the IPL/SPL.
If it works, then let the phone boot up completely. Check it out. And then you can run the RUU for the original Cingular OEM once the phone is booted to get it back to Cingular OEM state (full IPL/SPL, OS, GSM, Extended_ROM, etc.)
From here (if you make it) then any further flashing of ROMs, you will want to flash G4 safe ROM's, and you can do this using the SoftSPL folder. Copy the nk.nbf from the custom ROM you want to flash into the SoftSPL folder and run the "START-sSPL.exe" with your phone connected (not in bootloader mode, has to be completely started up and recognized by ActiveSync, but you do not need to establish partnership ... just skip/cancel that part and phone will connect to ActiveSync as a "Guest").
Good Luck. Let me know how you make out with this.

Just to answer your questions.
I ran the "newromupdateutility_wizard.exe"
Would follow thy new instruction sire and get back to thee.....lol
Thanks again.

I am not here to say "Yipee, its done'
But rather to say that the universe, cingular and the god of communication might have just conspired against me.
Just when i think i would finally get my phone working after 3 weeks, a 2 yr old kid took my batteries and only God know where that batteries is now.
Tried to buy a new one but all i get is "Wow! that a pretty old uncommon phone here"
I intend to use an ac to dc converter and when i am done i would give you the feedback
Thanks
PS: Just wanted to give you the heads-up

So i found the battery early this a.m.
Flashed the phone with the ROM you uploaded and it was succesful but on starting it i get a green screen and its damn slow and doesn't even pass the spot where you are asked to align screen (i really do think that nothing happen and its still the Wizard Love ROM that its still booting into)
So I am still stuck?
Hmmm....

OK i guess there might be a psych diagnosis for what i am doing (posting excessive replies without any respond)
It just a worried person.
So i kept re-trying to flash the ROM on my phone about 2ce.
Then i noticed on the 2nd time at about 86% the phone seemed to restart itself into bootloader mode about 2-3X, so i thot the battery was running out. Decided to take it out and get it charged.
On plugging the battery back to the phone all i got was a white screen and starting it on bootloader mode OR hard-resetting still gives me that white screen. On removing the battery the phone flashes like once or twice.
Is this the end? The phone has brought an apocalypse on?
Been doing a lot of browsing for clues but nothing tangible yet.

God smiled on me and the phone started
Got the ROM you gave me flashed and its really refreshing to see the Windows Mobile logo again
But i am stuck at the align screen tho'
I tap and nothing happens unless i drag the target and it just moves around and get back to the original spot.
Thats the latest pal.

OOPS. I did not read all .... your posts ... I just answered your post at the end of the last page. Did not see these last 2.
This is a good sign that you get past the initial boot splash screens and make it to the Align Screen ... soft reset the phone again and look at the IPL SPL that shows on the screen. Is it 2.25.0001 or 2.26.0001?
If 2.25.0001 then let the phone boot up to the Align Screen (and if you cannot get past this then just leave it at this point). Plug back into computer and now try to flash Cingular OEM ROM 2.25 that you tried earlier using the stock file.
If this doesn't let you flash for the same reasons as before (i.e., Invalid RUU tool or Not correct operator) then extract the nk.nbf from the Stock Cingular ROM (right click on the Cingular RUU OEM exe and select "Extract here ...".) then copy the nk.nbf over to the Soft SPL folder and use the START-sSPL.exe and flash this way. (you can delete the rest of the files from the Extract process.
Good Luck. Let me know the IPL SPL you get.

I know my posts are getting sickening but i am really desperate.
Got some info about how to bypass the align screen online but couldn't get my phone to boot anymore.
Soft reset/Hard reset/Bootloader mode: All of it just shows a white screen and nothin more.
Any ideas?

PS:The last time i could start the phone the IPL/SPL was 2.25.0001.

Just want to add this cos i just noticed it:
1. Sometimes tapping the Camera button alone puts the phone on (tho' it shows that annoying white screen)
2. On connecting the phone to a PC the PC recognises it even tho' its off and once i put it on and that annoying white screen comes on, the PC gives the same sound as when a USB is detached.
Hope these info would help.
I"m really getting depressed now. Hope's looking dimmer.

OK. I am now suspecting that you may also have a battery problem. How old is the battery. Could be the battery no longer has enough capacity. It may charge but only hold a charge for very short time and voltage may be too low. Maybe enough power to keep some of the electronics "awake" but not enough to drive the LCD.
It is now IPL/SPL 2.25.0001 so it should be able to flash the Cingular OEM ROM. You may want to try a different battery. Other than this, if not a problem with the battery then I think maybe phone itself is coming to an end.
I would try the battery route, making sure you have a good power source, and then try to flash the stock Cingular ROM.
You can still get these batteries on ebay and phone as well. If you are going to spend any money then maybe instead consider a newer model phone on ebay. (if you are patient you can find very good deal ... I got the T-Mo MDA Vario version of the Wizard (WIZA200) for $25 plus shipping, brand new with a carrying case. It was an estate item from a salesman who passed away and phone was not used before he passed on. One man's misfortune, another man's luck. I am now selling this on ebay plus memory card and earphone here ... http://bit.ly/hDHxrW. I have two more on sale at ebay here... http://bit.ly/eV0zZh ... and here ... http://bit.ly/gLIiKh. I am selling 3 and I have upgraded to Touch Pro 2. Go with AT&T version as this can beused world wide on 3G in North America and is quad band GSM for use in rest of world)

WOW
Thanks Bud
I would change the batteries and really don't mind buying another one but the only problem is i am not in USA nor Canada except i give an address in the US to send it to.
PS: Got to the links and it was a bidding process that was over by the time i got there. If anything opens up you can holla at me.
Would get back to you if there are any new developments

WOW
Thanks Bud
I would change the batteries and really don't mind buying another one but the only problem is i am not in USA nor Canada except i give an address in the US to send it to.
PS: Got to the links and it was a bidding process that was over by the time i got there. If anything opens up you can holla at me.
Would get back to you if there are any new developments

Cheap battery on ebay ..
http://cgi.ebay.ca/New-Li-ion-Batte...652056?pt=PDA_Accessories&hash=item5d2d297c58
http://cgi.ebay.ca/Battery-HTC-Wiza...163910?pt=PDA_Accessories&hash=item45f7ebb846
Phone
Wizards
http://cgi.ebay.ca/HTC-MDA-Mobile-S...0528835033?pt=Cell_Phones&hash=item4cf50dc5d9