Related
Hi,
I've been browsing the web and can't seem to find anything suitable. Does anybody know of way of sending text messages from your PC through Active Sync to an XDA mini s. Something similar to the Nokia PC Suite. I can't believe that nothing exists?
Thanks
Marc
mokl_uk said:
Hi,
I've been browsing the web and can't seem to find anything suitable. Does anybody know of way of sending text messages from your PC through Active Sync to an XDA mini s. Something similar to the Nokia PC Suite. I can't believe that nothing exists?
Thanks
Marc
Click to expand...
Click to collapse
1, welcome to XDA-Dev
2, you mean, say, mass message seding with, say, contribution lists on the desktop PC? Or, did you mean simply remote controlling your PPC? If the latter, read my remote control articles (Wiki!)
Hi, Thanks for the welcome.
I've seen the application that remotely controls the PPC through the active sync connection. I was hoping of just some kind of small app that could sit somewhere with your contacts and then send text messages from.
Is the remote control app the way that people normally do this then?
Regards
Marc
you can just buy Jeyo mobile companion (to be used independently in your desktop) or mobile extender (to be used as plug in to your outlook) to send SMS from your desktop.
Thanks, will have a look at the Jeyo software. Was hoping for something open source but that's pretty cheap. Marc
I use Pocket Controller-Professional it's great and it syncs clipboards too great for pasting addresses etc from my pc data base into text to send
Hi!
When I have my PDA connected to my PC using bluetooth and activesync, I can use the Internet connection of the pc directly from my PDA. For instance I can launch Mobile IE and visit a web page.
However I cannot use the Voip function of my PDA. The Today plug-in shows 'No service' status for my voip configuration (if I connect to Internet using WiFi, Voip works).
In the beginning I thought that ActiveSync only allows port 80 (HTTP) access. However I can also download or send e-mail messages using POP3/SMTP which use different ports.
Do you have any idea if I can also use Voip over the Internet connection shared by activesync?
Ha ha, good attention, however estimate should be be subjected to limiting of.The Voip used when Voip perhaps can'ted use "unit constitution"
xiaolongl said:
Ha ha, good attention, however estimate should be be subjected to limiting of.The Voip used when Voip perhaps can'ted use "unit constitution"
Click to expand...
Click to collapse
I'm afraid I don't understand a word of what you write!
Hi,
I have the same problem. Anyone have idea ? Please help!
xiaolongl said:
Ha ha, good attention, however estimate should be be subjected to limiting of.The Voip used when Voip perhaps can'ted use "unit constitution"
Click to expand...
Click to collapse
lol... never use a online translator...
The original question has not been answered, so I ask again.
papadi said:
Hi!
When I have my PDA connected to my PC using bluetooth and activesync, I can use the Internet connection of the pc directly from my PDA. For instance I can launch Mobile IE and visit a web page.
However I cannot use the Voip function of my PDA. The Today plug-in shows 'No service' status for my voip configuration (if I connect to Internet using WiFi, Voip works).
In the beginning I thought that ActiveSync only allows port 80 (HTTP) access. However I can also download or send e-mail messages using POP3/SMTP which use different ports.
Do you have any idea if I can also use Voip over the Internet connection shared by activesync?
Click to expand...
Click to collapse
cesierra said:
The original question has not been answered, so I ask again.
Click to expand...
Click to collapse
I assume this is down to the NAT implementation on the Host PC and/or Windows Mobile 6.x not actually allowing this anyway - the PDA to PC uses the autoconfig IP network 169.254.0.0/16, all connections from the PDA are proxied via the host PC. I have just captured the traffic flow using WireShark from the host PC out (i.e. not the PDA to PC link) to see what is sent when the SIP client is started (Internet Calling). I can see the initial DNS lookup for the SIP server host (in my case 'sip.btsip.bt.net') which gets a valid reply, however there are no more packets transmitted from the host PC.
If I capture on the PDA-to-PC link (USB) I can see the DTPT protocol (DeskTop PassThrough protocol) which although WireShark understands it isn't very intuitive. I can see a 'QuerySet' with the DNS name embedded (sip.btsip.bt.net) but there is little else.
I really don't think ActiveSync is capable of doing this and to be honest I don't think the Windows Mobile is even trying. I have captured several conversations over WiFi when I first got the SIP client working and the conversation I am seeing here is nothing like them.
Andy
use fring..
Paquale said:
use fring..
Click to expand...
Click to collapse
fring works! windows 7 & wm 6.1
Hi, any advice which software I can use to send SMS with my Desktop PC over the Raphael to GPS? I use Bluetooth/USB connection. thanks
Michael
search knows all
http://www.google.com/cse?cx=000825...op+PC&sa=Search&cof=FORID:0&ie=utf-8&oe=utf-8
if you mean GPRS instead of GPS, here is another approach
http://www.google.es/search?hl=es&r...&cd=1&q=send+SMS+over+the+raphael+GPS&spell=1
as i ever say, google is our frinend...
Try Jeyo Mobile Extender 2.5 for Outlook...
www.jeyo.com
I use it and it's ok!
I´ve try a lot of programs. Unfortunately they won´t connect the phone. I´am using Windows Server 2008 64bit as OS. I´ve checked with Jeyo, PocketSMS 2.02. Anyone have alternative programs?
michi_91 said:
I´ve try a lot of programs. Unfortunately they won´t connect the phone. I´am using Windows Server 2008 64bit as OS. I´ve checked with Jeyo, PocketSMS 2.02. Anyone have alternative programs?
Click to expand...
Click to collapse
Well, i have same situation in my office, my desktop computer runs Windows 2008 server, and the only way i found to connect my PDA was install VMWare Workstation and use a guest OS with Vista or XP and connect the PDA to the guest OS instead to host...
Cheers
Why don 't you try MyMobile software (freeware)? Then you can see (like remote desktop) your mobile 's screen and use your PC keyboard and mouse to write SMS. You don 't even need Active Synch. Use IP connection.
http://www.mymobiler.com/
I use mymobiler and it works, but its very slow (USB).....(I´am writing
10fingers.....) If I type too fast, the phone doesn´t become the input....
I use Pocket Controller Pro, and it's awesome!!!(fast, includes explorer, regedit, skins, etc..), it's not free but worth it.
regards
freco said:
Why don 't you try MyMobile software (freeware)? Then you can see (like remote desktop) your mobile 's screen and use your PC keyboard and mouse to write SMS. You don 't even need Active Synch. Use IP connection.
http://www.mymobiler.com/
Click to expand...
Click to collapse
This workes really well for me and does a lot more than just SMS.....
.
dashwire
Use a website called www.dashwire.com. I just registered yesterday and it is awesome.
Basically, you register on the site, install an app on your touch pro, and then the app backs up all your contacts, sms, etc (you can choose which) and sends them to the site, where you can read and reply. If you write an sms on the website, it sends the details to your touch pro via the internet, then sends the sms from your touch pro. Cool eh?
AMoosa said:
Use a website called www.dashwire.com. I just registered yesterday and it is awesome.
Basically, you register on the site, install an app on your touch pro, and then the app backs up all your contacts, sms, etc (you can choose which) and sends them to the site, where you can read and reply. If you write an sms on the website, it sends the details to your touch pro via the internet, then sends the sms from your touch pro. Cool eh?
Click to expand...
Click to collapse
Very cool indeed....except that hopefuly you realize that you are deliberately providing more than personal information to a company you probably don't know at all. Ever wondered why it's free? No ads, no nothing? No way anybody makes any money from this service...but most likely is resseling all the info you share...just read the disclaimer of this shady company...anyway, if I were you I would immediatelly shut it down! Am not sure how much you are familiar with legal lingo, but the wording of terms of use is leaving more than enough space for them to do pretty much anything with your information.
Call me paranoid, but this is NO GO for me. Just like "wonderful" Facebook, which I personally call the biggest privacy scam in the history....
Just saying...
ahh, without the option "USB to PC" fast sync Jeyo works fine also with Windows Server 2008 Now, I´m happy Thanks for help!
I recently upgraded my HTC Wizard (Cingular 8125) from Windows mobile 5 to Windows Mobile 6.1.
Everything is working OK, but I just learned of this... on WM5, I could send an SMS text message to an email address. On Wm6.1, I get the error message "Text Message account cannot be used to send email messages". Is there another way to send SMS messages to an email address? Or, is there a setting somewhere (in the registry) that will allow me to select an email address as a SMS text recipient?
Thanks!
sms is std only a thing you can send to a telefone number
but an network can offer the service to pass on sms's to email address
so i suspect you need to get what ever 3th party program did it on your
wm5 rom and install that and it should work
if the program is not there you cant do anything with the reg as it's not std wm functionality
Rudegar said:
sms is std only a thing you can send to a telefone number
but an network can offer the service to pass on sms's to email address
so i suspect you need to get what ever 3th party program did it on your
wm5 rom and install that and it should work
if the program is not there you cant do anything with the reg as it's not std wm functionality
Click to expand...
Click to collapse
hmmmm... thanks for the hint. I'm not really sure what program I had under WM5 -- like I said, I have a Cingular 8125 and the WM5 was the "factory" installation.... does that give you any clues?
As far as I know I'm not running any special 3rd-party messaging client -- I assumed that the SMS stuff on my WM5 was the default Windows Mobile Messaging client... the interface on my new Windows Mobile 6.1 looks pretty much the same (except I can't select an email address as a recipient for an SMS message).
thanks
KSandbergFL said:
hmmmm... thanks for the hint. I'm not really sure what program I had under WM5 -- like I said, I have a Cingular 8125 and the WM5 was the "factory" installation.... does that give you any clues?
As far as I know I'm not running any special 3rd-party messaging client -- I assumed that the SMS stuff on my WM5 was the default Windows Mobile Messaging client... the interface on my new Windows Mobile 6.1 looks pretty much the same (except I can't select an email address as a recipient for an SMS message).
thanks
Click to expand...
Click to collapse
I found my answer... the HTC Diamond ROM that I had downloaded, was missing some registry settings to allow SMS-to-SMTP thru the AT&T phone network.
the answer was already on this site, sorry I didn't find it sooner!
Here:
http://forum.xda-developers.com/showthread.php?p=1987708#post1987708
Hi!
i visited here after a long time,how is every body,
so i have a question,that?
i have imate jasjam,can i use voip on my mobile like(intervoip or freecall)if yes kindly show me how to do that.
thanx in advance
don't know of apps for windows mobile supported by intervoip or freecall..
if you want to use JahJah, GrandCentral or Phone.com you can use iDialer
you can also configure a client from other websites if your rom has the Internet Calling option..
read this:
http://forum.xda-developers.com/showthread.php?t=299950
Fring
Hi
If the VOIP services you want to use are standard SIP services (The details should be available on their respective websites - SIP device configuration) then they will work in Fring. Go to www.fring.com
Cheers
andrew-in-woking