Using Voip on Internet of Host PC with ActiveSync - 8125, K-JAM, P4300, MDA Vario ROM Development

Hi!
When I have my PDA connected to my PC using bluetooth and activesync, I can use the Internet connection of the pc directly from my PDA. For instance I can launch Mobile IE and visit a web page.
However I cannot use the Voip function of my PDA. The Today plug-in shows 'No service' status for my voip configuration (if I connect to Internet using WiFi, Voip works).
In the beginning I thought that ActiveSync only allows port 80 (HTTP) access. However I can also download or send e-mail messages using POP3/SMTP which use different ports.
Do you have any idea if I can also use Voip over the Internet connection shared by activesync?

Ha ha, good attention, however estimate should be be subjected to limiting of.The Voip used when Voip perhaps can'ted use "unit constitution"

xiaolongl said:
Ha ha, good attention, however estimate should be be subjected to limiting of.The Voip used when Voip perhaps can'ted use "unit constitution"
Click to expand...
Click to collapse
I'm afraid I don't understand a word of what you write!

Hi,
I have the same problem. Anyone have idea ? Please help!

xiaolongl said:
Ha ha, good attention, however estimate should be be subjected to limiting of.The Voip used when Voip perhaps can'ted use "unit constitution"
Click to expand...
Click to collapse
lol... never use a online translator...

The original question has not been answered, so I ask again.
papadi said:
Hi!
When I have my PDA connected to my PC using bluetooth and activesync, I can use the Internet connection of the pc directly from my PDA. For instance I can launch Mobile IE and visit a web page.
However I cannot use the Voip function of my PDA. The Today plug-in shows 'No service' status for my voip configuration (if I connect to Internet using WiFi, Voip works).
In the beginning I thought that ActiveSync only allows port 80 (HTTP) access. However I can also download or send e-mail messages using POP3/SMTP which use different ports.
Do you have any idea if I can also use Voip over the Internet connection shared by activesync?
Click to expand...
Click to collapse

cesierra said:
The original question has not been answered, so I ask again.
Click to expand...
Click to collapse
I assume this is down to the NAT implementation on the Host PC and/or Windows Mobile 6.x not actually allowing this anyway - the PDA to PC uses the autoconfig IP network 169.254.0.0/16, all connections from the PDA are proxied via the host PC. I have just captured the traffic flow using WireShark from the host PC out (i.e. not the PDA to PC link) to see what is sent when the SIP client is started (Internet Calling). I can see the initial DNS lookup for the SIP server host (in my case 'sip.btsip.bt.net') which gets a valid reply, however there are no more packets transmitted from the host PC.
If I capture on the PDA-to-PC link (USB) I can see the DTPT protocol (DeskTop PassThrough protocol) which although WireShark understands it isn't very intuitive. I can see a 'QuerySet' with the DNS name embedded (sip.btsip.bt.net) but there is little else.
I really don't think ActiveSync is capable of doing this and to be honest I don't think the Windows Mobile is even trying. I have captured several conversations over WiFi when I first got the SIP client working and the conversation I am seeing here is nothing like them.
Andy

use fring..

Paquale said:
use fring..
Click to expand...
Click to collapse
fring works! windows 7 & wm 6.1

Related

Connecting Smartphone To Wi-Fi Network???

Can I reach to the files of my notebook with Wi-Fi smartphone in my wireless area? I want to perform a network between my smartphone and notebook with Wi-Fi network. Is it possible?
No on smartphone you cannot access files that are on your notebook.
Try a VNC (easy).
Start with something like this: TightVNC (free) as a server on your notebook and .Net VNC Viewer (free) as a client on your phone; read and play.
There is lag time in rendering on the little screen; not to mention that it's a little screen (you might tire of looking at it and/or navigating).
Another good client is VNC+; it worked best for me among the clients that I tried but there is a cost.
You will be able to access your notebook via any Wi-Fi connection provided that your server is running and connected to the internet.
Good Luck.
FTP is a good solution too.
Install a FTP server (I use free GuildFTPd) on your laptop, and create a user with access to all drives or folders of interest. Make sure that no acces from the internet is possible if not neede for security reasons. Use a strong password.
Use Resco Explorer or Total Commander as client. This way you can download or upload files from your laptop.

Gmail MIDlet and GPRS proxy...

I have done some searching, and have not found anything that really answers my questions. I have an HTC-P4300 and am using the Jbed MIDlet manager (same behavior with TAO). Opera Mini runs great and works fine through the system set GPRS (Edge) proxy. As expected, it also works fine when I have my connection set to "My ISP" and connected via WiFi.
My problem is with the Gmail MIDlet. It works fine in the later configuration using WiFi. It can't connect when my phone is configured to use the proxy (port 80) with GPRS. From what I can tell the MIDlet should only need http and/or https access. I can log into gmail using a browser without problems. I assume there is something going on behind the scenes I don't know about... What am I missing? Shouldn't this MIDlet be able to work with a proxy?
Any help would be wonderful! Thanks in advance and have a GREAT day!
PhilD
same is happening with me
Well, I haven't found anywhere that will state it directly, including on Google's help groups, but I am guessing their new java app uses IMAP to connect to their servers. In short I don't think this will ever work with a proxied network connection. That is a true bummer!
Anyone have their old MIDlet laying around I could try? Thanks for the help!
PhilD

send SMS from Desktop PC

Hi, any advice which software I can use to send SMS with my Desktop PC over the Raphael to GPS? I use Bluetooth/USB connection. thanks
Michael
search knows all
http://www.google.com/cse?cx=000825...op+PC&sa=Search&cof=FORID:0&ie=utf-8&oe=utf-8
if you mean GPRS instead of GPS, here is another approach
http://www.google.es/search?hl=es&r...&cd=1&q=send+SMS+over+the+raphael+GPS&spell=1
as i ever say, google is our frinend...
Try Jeyo Mobile Extender 2.5 for Outlook...
www.jeyo.com
I use it and it's ok!
I´ve try a lot of programs. Unfortunately they won´t connect the phone. I´am using Windows Server 2008 64bit as OS. I´ve checked with Jeyo, PocketSMS 2.02. Anyone have alternative programs?
michi_91 said:
I´ve try a lot of programs. Unfortunately they won´t connect the phone. I´am using Windows Server 2008 64bit as OS. I´ve checked with Jeyo, PocketSMS 2.02. Anyone have alternative programs?
Click to expand...
Click to collapse
Well, i have same situation in my office, my desktop computer runs Windows 2008 server, and the only way i found to connect my PDA was install VMWare Workstation and use a guest OS with Vista or XP and connect the PDA to the guest OS instead to host...
Cheers
Why don 't you try MyMobile software (freeware)? Then you can see (like remote desktop) your mobile 's screen and use your PC keyboard and mouse to write SMS. You don 't even need Active Synch. Use IP connection.
http://www.mymobiler.com/
I use mymobiler and it works, but its very slow (USB).....(I´am writing
10fingers.....) If I type too fast, the phone doesn´t become the input....
I use Pocket Controller Pro, and it's awesome!!!(fast, includes explorer, regedit, skins, etc..), it's not free but worth it.
regards
freco said:
Why don 't you try MyMobile software (freeware)? Then you can see (like remote desktop) your mobile 's screen and use your PC keyboard and mouse to write SMS. You don 't even need Active Synch. Use IP connection.
http://www.mymobiler.com/
Click to expand...
Click to collapse
This workes really well for me and does a lot more than just SMS.....
.
dashwire
Use a website called www.dashwire.com. I just registered yesterday and it is awesome.
Basically, you register on the site, install an app on your touch pro, and then the app backs up all your contacts, sms, etc (you can choose which) and sends them to the site, where you can read and reply. If you write an sms on the website, it sends the details to your touch pro via the internet, then sends the sms from your touch pro. Cool eh?
AMoosa said:
Use a website called www.dashwire.com. I just registered yesterday and it is awesome.
Basically, you register on the site, install an app on your touch pro, and then the app backs up all your contacts, sms, etc (you can choose which) and sends them to the site, where you can read and reply. If you write an sms on the website, it sends the details to your touch pro via the internet, then sends the sms from your touch pro. Cool eh?
Click to expand...
Click to collapse
Very cool indeed....except that hopefuly you realize that you are deliberately providing more than personal information to a company you probably don't know at all. Ever wondered why it's free? No ads, no nothing? No way anybody makes any money from this service...but most likely is resseling all the info you share...just read the disclaimer of this shady company...anyway, if I were you I would immediatelly shut it down! Am not sure how much you are familiar with legal lingo, but the wording of terms of use is leaving more than enough space for them to do pretty much anything with your information.
Call me paranoid, but this is NO GO for me. Just like "wonderful" Facebook, which I personally call the biggest privacy scam in the history....
Just saying...
ahh, without the option "USB to PC" fast sync Jeyo works fine also with Windows Server 2008 Now, I´m happy Thanks for help!

[APP Idea] server app

Ok, the basic Idea of this App is to provide an easy setup for an ftp & or web server (should be customizable) which also provides a shortened url for easy access.
also my idea was that the app can do this over different of protocolls, bluetooth, w-lan usw.
is something like this technically possible?, i know there are ftpserver apps out there but it is not quite the same.
justanordinarydude said:
Ok, the basic Idea of this App is to provide an easy setup for an ftp & or web server (should be customizable) which also provides a shortened url for easy access.
also my idea was that the app can do this over different of protocolls, bluetooth, w-lan usw.
is something like this technically possible?, i know there are ftpserver apps out there but it is not quite the same.
Click to expand...
Click to collapse
Easy ftp and web server apps already exist that work over wifi. bluetooth is tricky, as a normal web or ftp server won't be easily usable (but bluetooth already has methods of doing file transfers that works quite well, and there are apps to handle this, like Blutooth File Manager). What is USW?
AFAIK, there is not an app to do those things over ad-hoc wifi - they all require connecting to an access point. Being able to open up an app and have it set up an ad-hoc wireless network with another android device and allow easy high-speed file sharing would be awesome.
As for cellular data, there's a major hurdle to overcome on some carriers. Verizon, for example, does not allow incoming connections over cellular data. So you can set up a web or ftp server, but you won't be able to access it. The way around that is to have the phone establish the connection to some server, then have that server act as the gateway. Bandwidth is not free, though, so I suspect you'd be hard-pressed to find an app that includes that feature, unless it also requires that you set up your own server gateway. I'd like to see something like this - an app that establishes general-purpose 2-way comms with a server application on command (by hitting a "start" button in the app), which then allows you to set up different types of servers (ssh, ftp, web, etc) that are routed through that gateway machine that you set up.
One way to accomplish that whole scheme is to use a VPN - when a VPN is established (even over 3G), you can access any server you want to via the VPN-assigned IP address.

[Completed] How can i Remote desktop using rdp over the internet?

I configured my pc to be remotely controlled using the tablet, using rdp. The software im using is parallels. Also, tried the ms remote desktop app. Both works wonders over lan. But i want to access my pc when im outside, through internet.
I know there are apps like teamviewer and splashtop. But they require me to install a server app in the pc. Paralells dont. So i configured a no-ip host, port forwarding, ddns in my router and firewall in my pc, to accept incoming remote desktop connections through internet. But it seems the only way to do it in android is by installing a server app in the pc. Which i think is useless because i already have everything configured to do it without extra software and i dont want to create a teamviewer account.
Any ideas or suggestions?
s4r0m said:
I configured my pc to be remotely controlled using the tablet, using rdp. The software im using is parallels. Also, tried the ms remote desktop app. Both works wonders over lan. But i want to access my pc when im outside, through internet.
I know there are apps like teamviewer and splashtop. But they require me to install a server app in the pc. Paralells dont. So i configured a no-ip host, port forwarding, ddns in my router and firewall in my pc, to accept incoming remote desktop connections through internet. But it seems the only way to do it in android is by installing a server app in the pc. Which i think is useless because i already have everything configured to do it without extra software and i dont want to create a teamviewer account.
Any ideas or suggestions?
Click to expand...
Click to collapse
Hi,
The purpose of XDA Assist is for newbies to find their way around XDA. Please post your question in Android Q&A,Help and Troubleshooting.

Categories

Resources