Hi, I need some help with my phone I have an AT&T Tilt and here is my current setting ROM Version: 1.62.502, ROM date 01/17/08, Radio Version 1.27.14.19, and Protocol Version 22.45.88.07H. My GPS have stop working not sure why every time when i click on the external GPS and when I try to put the COM port for the hard ware it does not work. Can someone help me out please I would really like to get my GPS working again. I been asking around for help but nothing has been working yet.
Why did you even touch EXTERNAL GPS?
anyway
first, select COM4
second tab put (NONE) as hardware port and baudrate at 4800
and the last tab put it on automatic
(Start -> Settings -> Connections -> External GPS)
Wasn't it once you have it thw rong setting you need to soft-reset or hard-reset the deviecE?
Hi the AT&T Tilt has a build in GPS it was working just fine but if I put the program as COM4 and the Hardware as NONE and the baud rate 4800 then how does the TOM TOM know what setting to pick. I been having a hard time to find out how to make my tom tom to work
Try using GPStest and uping the baud rate. Changing settings for EXTERNAL GPS will make no difference when you have an internal GPS. And the cab to GPStest is in my signature. And if you are running TomTom most of the time you will need to run GPStest first and let it get a fix and then run TomTom.
in TomTom you select "Other GPS" or "Integrated/build-in GPS"
then select COM4 when asked.
Ok HI I am a bit lost so what do I do KDKobes what is that porgram about GPStest. I just selest the build in GPS receiver and tom tom can't find any signal for like 5 min.
Hi, KDKobes after I ran the GPS test program it say that the GPS setting is COM4 and the Baud Rate is 9600 so why would they have an External GPS with an hard ware port that does not work any more.
fubarms said:
Hi, KDKobes after I ran the GPS test program it say that the GPS setting is COM4 and the Baud Rate is 9600 so why would they have an External GPS with an hard ware port that does not work any more.
Click to expand...
Click to collapse
They have the External GPS option for people who want to use an external one, tend to get better signal. Also used for if you want to hook into your computer. Just remember some radio's work best at different baud rates. After changing the baud rate its best to restart the phone. Not sure what radio you are using, but most of the time 38400 or 19200 baud rates are best.
fubarms said:
Hi, KDKobes after I ran the GPS test program it say that the GPS setting is COM4 and the Baud Rate is 9600 so why would they have an External GPS with an hard ware port that does not work any more.
Click to expand...
Click to collapse
are you serious? please don't reply to this fool. There are plenty of threads on TomTom, search for them all your answers will be there.
Related
Orbit2-- GPS cannot be detected with IGO PLS HELP?!?!?
I have a HUGE problem with getting my GPS running on my Orbit2. It came from O2 with CoPilot7 preinstalled with the maps of UK and Ireland, which I dont use, because I am not located inthere, nevertheless Copilot detects GPS signal and shows positioning, but i dint have the maps for the area that i am in.
I tried to install IGO6 and then IGO8 but I have the same problem-- it cannot detect GPS device, no matter what which COMM Port and BAUD Rate I select.
How come CoPilot detects, and IGO does not? I read that Orbit2 is not locked?!?
Should I boot the whole device using some other ROM.
Why are you doing multiple posts?
lubmarinov said:
Orbit2-- GPS cannot be detected with IGO PLS HELP?!?!?
it cannot detect GPS device, no matter what which COMM Port and BAUD Rate I select.
Click to expand...
Click to collapse
Have not had any GPS software that didn't work with correct settings yet.
though i haven't testet IGO. But why shouldn't it work also?
Correct settings for internal Orbit2 GPS device is: Com4, 4800 Baud.
Olioaglio
All recent versions of iGO work whith settings defined, and on aoutoconfig...
Have just got my TP on Vodafone UK, it does not have GPS enabled, is there any way I can enable it
What do you mean? There is no GPS in Start -> Settings?
Anyway try this "must have" tool from schaps so you can manage a lot of settings, GPS included.
NO GPS
freco said:
What do you mean? There is no GPS in Start -> Settings?
Anyway try this "must have" tool from schaps so you can manage a lot of settings, GPS included.
Click to expand...
Click to collapse
IF I load TomTom 6, it can not fin the internal GPS, I can connect to an external GPS via Bluetooth
Sounds to me like you've got the version of tomtom that doesn't have the option of choosing the internal GPS.
Download GPSTest to see whether the GPS is automatically detected.
can i suggest u try gps test n see what that does
also try it with google maps
i think this might be a handset fault tho cant see why it would be disabled as its a selling point
Im 99% sure that TT6 doesnt support internal GPS modules, had the same problem with my N95....or come to think of it was that TT5? Hmmmm im not so sure now lol...
TT6 worked fine on my MDAC3 with internal GPS.
Funnily enough, the Voda specs page makes no mention of GPS at all
ryraum said:
IF I load TomTom 6, it can not fin the internal GPS, I can connect to an external GPS via Bluetooth
Click to expand...
Click to collapse
have you tried Other NMEA GPS-reciever, baudrate 4800, COM4 already?
NO GPS
Your right vodafone does not show GPS
Have tried it with Google Maps and will try it with GPStest this evening.
Spoke to Vodafone are going to send another handset
have also tried Other NMEA GPS-reciever, baudrate 4800, COM4
I have a Vodafone handset and thought the same as you.
It does have a GPS and it does work with TOMTOM 6.
1. Go to programs and slect quickgps and download.
Then go into tomtom and under showgps satus select configure and choose other NMEA GPS, slect baud rate 57600 and then load a destination.
Make sure you are outside tho and it might take 25 mins to get your first ever fix.
Mine connects within seconds now.
Good luck and let me know if I can help you further.
Could someone post the link to the Tom Tom 6 or 7 cab file for the Touch Pro?
Thanks
Regards,
Neil
http://forum.xda-developers.com/showthread.php?t=427744
2 threads above this one
ALL Working Fine
Ran GPS test, shows GPS working.
Set GPS to com4 9600, took about 2 mins and found signals.
Works fine fine with TOMTom 6.030
Thanks for all the help.
What's working fine?..TOMTOM 7 maps with the 6.032 cab?..
I have a original copy of 6.032 and iuse traffic updates via tomtom..my concern is that i wont be able to use the traffic updates... can someone confirm plz? and where i can get the maps?
pm?
EN4CER69 said:
What's working fine?..TOMTOM 7 maps with the 6.032 cab?..
I have a original copy of 6.032 and iuse traffic updates via tomtom..my concern is that i wont be able to use the traffic updates... can someone confirm plz? and where i can get the maps?
pm?
Click to expand...
Click to collapse
The traffic subscription is registered to your account, therefore it will work on version 6 or version 7. However, your maps (6.75?) will not work with tomtom 7, but you can purchase new maps from tomtom home as the touch pro is now recognised by the tomtom home application (version 2.4 or above)
ardsar said:
The traffic subscription is registered to your account, therefore it will work on version 6 or version 7. However, your maps (6.75?) will not work with tomtom 7, but you can purchase new maps from tomtom home as the touch pro is now recognised by the tomtom home application (version 2.4 or above)
Click to expand...
Click to collapse
Thanks for that.... Do you know if there are any advantages with tt7 over tt6 other than newer maps?
and
when tt do official release tt7 will it inc a cab/install file?
many thanks again
ALL Working Fine
Test handset with GPStest, works fine.
Change GPS setting to com4 speed 9600, wait 2mins and got a signal.
TomTom 6.030 loaded and working
Thanks to all for your help and avice.
ryraum said:
Ran GPS test, shows GPS working.
Set GPS to com4 9600, took about 2 mins and found signals.
Works fine fine with TOMTom 6.030
Thanks for all the help.
Click to expand...
Click to collapse
I'm also facing a similar problem. Google Maps is unable to detect the internal gps receiver.
When I run, GPS Test, it just shows the GPS starting up message (with 2 yellow bars, sometimes only one). I have run quick gps and downloaded the satellite data twice already.
Can somebody please help me?
Hi there,
Have been trying to setup the gps signal on my dads touch pro (raphael), however it seems incapable of getting any kind of GPS receipt.
I've installed HTC GPS tool to test this and have tested 57600 (default) and now 4800 baud rate. It does not seem to get ANY response, does not find a satellite whatsoever. I've also set it to cold start, and have run quickgps beforehand.
What settings do you guys use to get a GPS fix and do you have any suggestions for me?
Rom version is latest official, so is radio. No hardspl or any of that stuff installed, stock touch pro.
boud will make no difference at all
it's an old leftover from when gps was serial rs232 connected
and even back then it would make no difference as long
as the wired gps supported the chosen boudrate
preciously few data is being transmitted from a gps
but mind you it's rare to get a gps to work inside try outside or in a car
there they work
use ChartCross GPS app
it auto detects GPS and gives you indication on the progress of getting the GPS fix
usually it's COM4, baud could be 4800, 9600 (i've used these two) or anythinf
cold fix indoors (with QuickGPS almanac downloaded), i could get one indoors in 5 minutes... less than a minute outside of course
Hi @ all,
first of all a happy new year
I wonder if anyone has the Omnia B7330 running with TomTom 7 on it. I have the problem that TomTom doesn't find the internal GPS. I tried all possible settings with
"internal GPS"
" other NMEA GPS"
and all possible Baud rates and com Ports
but TomTom does not find the internal GPS.
In the meantime I wonder if perhaps the internal GPS might be damaged and I should send the device back??
On my HTC Snap (Maple) TomTom recognizes the internal GPS immediately.
I als tried to manage something concerning "Port Splitter", but most of these programs are not for WM without touchscreen....
Any ideas how to get this working?
Best Regards
Jolig
Hi, if you want to know if your device is working or not, try GPS Test 1.04. There is a cab file for it, "google is your friend" as they say. 8) If you run the program (it is good for non-touchscreens as well) and it can find a signal, then you have to fine tune your navigation software, if no signal, then you have a faulty device.
Happy New Year!
Welcome to forums
Hope this helps:
http://cellphoneforums.net/samsung/
Good luck,
Same Thing here...
...the Testapp recognizes the GPS on COM3 with 9600Baud and can work with it. The GPS Module seems to be working well, found my position after 10secs. TomTom however can't work with the GPS-Module... I'm on TomTom 7.910.
Any idea?
JC
Try this
-----Omnia Configuration-----
Settings\Hardware\External GPS
*GPS program port: COM2
*GPS hardware port: COM9
- Baud Rate: 9600
*Manage GPS automatically: YES
------Tomtom Configuration-----
*GPS NMEA
*Baud rate 4800
*COM2
IMPORTANT
When you make all the steps you have to see in the Satellites top/right windows of the tomtom a little Yellow/Black ball rolling, that means the GPS is working. You only have to wait to your Omnia GPS find the signal.
-> You can download an XTRA GPS DATA to improve the finding speed of the GPS, personally I can not see the diference between NO XTRA DATA and XTRA DATA.
Settings\Hardware\Enchanced GPS
*Enable XTRA DATA CONNECTION
*Disable automatically download.
*Press download button
With that configuration in my omnia I don't have any problem with Tomtom.
The Testapp also recognizes the GPS on COM3 on my B7330.
But it dosen't work on TomTom 7.910.
Is there a way to change the GPS to use COM2 ?
tom tom
Hello!
Do this:
use another phone with touch screen, set the tom tom gps as an external port and the appropriate speed,
save your settings. fire up tomtom on omni pro b-7330.
Can you type the addresses correctly? I had a problem with another phone with qwerty by tomtom7.
Erroneous indication of gps in omni pro B-7330 / no fix
Erroneous indication of gps in omni pro B-7330 / no fix
I need help, my gps in the B-7330 incorrectly indicates the distance of some 400km,
Is it a bug?
after uploading the google maps, fix grabs for a few seconds, and incorrectly states the place automapa (another program to navigation) also indicates the wrong place but other than google maps, the difference of some 1000km.,
I used GPSTEST 1.04:
COM3: 9600kb.
Is it firmware bug, or damage is hard?
using the settings from the post in advance Com9: omnia has gps pro, but did not catch the fix - no signal satleitów.
So, are you sure the port Com9?
So I need help
You should try posting on the proper section for this non HTC device:
http://forum.xda-developers.com/filter.php?cat=Samsung
TomTom GPS Problem
chindley said:
-----Omnia Configuration-----
Settings\Hardware\External GPS
*GPS program port: COM2
*GPS hardware port: COM9
- Baud Rate: 9600
*Manage GPS automatically: YES
Click to expand...
Click to collapse
Hi,
where did you find the external gps setting at the omnia. Cannot find them. thanks for your help.
Samsung Omnia B7330 and Tomtom Navigator 7
I am having the same trouble as the people above and cant get tomtom to see the internal gps - any help would be much appreciated.
thebiff said:
I am having the same trouble as the people above and cant get tomtom to see the internal gps - any help would be much appreciated.
Click to expand...
Click to collapse
TomTom is pants on the 7330.
I'm using Route 66 (v7) with UK and Europe maps. GPS can be interigated through the menu and cold fix is quicker than most I've used.
No GPS lag, and other than the soft button icons sitting above the call and call end buttons (can cause confusion), I would recommend going down this route instread (no pun intended)
Also strangely, the 'browse map' facility is managed through the 'zoom to' function.
Alan.
hi,
im using mda compact(htc magician and 05 64mb rom cotulla ) i have tomtom 7 with new maps demo works great ,only problem is can not get tomtom to see my bluetooth gps!
(gps works with a program called sky traq only settings i needed to set up is find bluetooth device and then connects, picks satellites up in a split second )
my question is there a program that will tell me what port my gps device using? is there away maybe with a registry editor to find out what port tomtom 7 is using?and possibly if needed a program to see what com port my bt 541 gps device uses or needs??
bluetooth setting
do i pair(i imagine i need to so i have
secure connection tick or untick?
bt com port?
only have choice com 6 com 7!
what are the recommended settings in external gps ?
program port?
hardware port?
manage gps automatically do i tick or untick? i have tried lots of settings i got as far as seeing no gps device in tomtom but with satellites greyed out like its stuck but i cant remember settings i used
hope some one can help me out ?????thanks for taking the time to read my post