GPS recommended baudrate etc - Touch Pro, Fuze General

Hi there,
Have been trying to setup the gps signal on my dads touch pro (raphael), however it seems incapable of getting any kind of GPS receipt.
I've installed HTC GPS tool to test this and have tested 57600 (default) and now 4800 baud rate. It does not seem to get ANY response, does not find a satellite whatsoever. I've also set it to cold start, and have run quickgps beforehand.
What settings do you guys use to get a GPS fix and do you have any suggestions for me?
Rom version is latest official, so is radio. No hardspl or any of that stuff installed, stock touch pro.

boud will make no difference at all
it's an old leftover from when gps was serial rs232 connected
and even back then it would make no difference as long
as the wired gps supported the chosen boudrate
preciously few data is being transmitted from a gps
but mind you it's rare to get a gps to work inside try outside or in a car
there they work

use ChartCross GPS app
it auto detects GPS and gives you indication on the progress of getting the GPS fix
usually it's COM4, baud could be 4800, 9600 (i've used these two) or anythinf
cold fix indoors (with QuickGPS almanac downloaded), i could get one indoors in 5 minutes... less than a minute outside of course

Related

Vodafone TP no GPS

Have just got my TP on Vodafone UK, it does not have GPS enabled, is there any way I can enable it
What do you mean? There is no GPS in Start -> Settings?
Anyway try this "must have" tool from schaps so you can manage a lot of settings, GPS included.
NO GPS
freco said:
What do you mean? There is no GPS in Start -> Settings?
Anyway try this "must have" tool from schaps so you can manage a lot of settings, GPS included.
Click to expand...
Click to collapse
IF I load TomTom 6, it can not fin the internal GPS, I can connect to an external GPS via Bluetooth
Sounds to me like you've got the version of tomtom that doesn't have the option of choosing the internal GPS.
Download GPSTest to see whether the GPS is automatically detected.
can i suggest u try gps test n see what that does
also try it with google maps
i think this might be a handset fault tho cant see why it would be disabled as its a selling point
Im 99% sure that TT6 doesnt support internal GPS modules, had the same problem with my N95....or come to think of it was that TT5? Hmmmm im not so sure now lol...
TT6 worked fine on my MDAC3 with internal GPS.
Funnily enough, the Voda specs page makes no mention of GPS at all
ryraum said:
IF I load TomTom 6, it can not fin the internal GPS, I can connect to an external GPS via Bluetooth
Click to expand...
Click to collapse
have you tried Other NMEA GPS-reciever, baudrate 4800, COM4 already?
NO GPS
Your right vodafone does not show GPS
Have tried it with Google Maps and will try it with GPStest this evening.
Spoke to Vodafone are going to send another handset
have also tried Other NMEA GPS-reciever, baudrate 4800, COM4
I have a Vodafone handset and thought the same as you.
It does have a GPS and it does work with TOMTOM 6.
1. Go to programs and slect quickgps and download.
Then go into tomtom and under showgps satus select configure and choose other NMEA GPS, slect baud rate 57600 and then load a destination.
Make sure you are outside tho and it might take 25 mins to get your first ever fix.
Mine connects within seconds now.
Good luck and let me know if I can help you further.
Could someone post the link to the Tom Tom 6 or 7 cab file for the Touch Pro?
Thanks
Regards,
Neil
http://forum.xda-developers.com/showthread.php?t=427744
2 threads above this one
ALL Working Fine
Ran GPS test, shows GPS working.
Set GPS to com4 9600, took about 2 mins and found signals.
Works fine fine with TOMTom 6.030
Thanks for all the help.
What's working fine?..TOMTOM 7 maps with the 6.032 cab?..
I have a original copy of 6.032 and iuse traffic updates via tomtom..my concern is that i wont be able to use the traffic updates... can someone confirm plz? and where i can get the maps?
pm?
EN4CER69 said:
What's working fine?..TOMTOM 7 maps with the 6.032 cab?..
I have a original copy of 6.032 and iuse traffic updates via tomtom..my concern is that i wont be able to use the traffic updates... can someone confirm plz? and where i can get the maps?
pm?
Click to expand...
Click to collapse
The traffic subscription is registered to your account, therefore it will work on version 6 or version 7. However, your maps (6.75?) will not work with tomtom 7, but you can purchase new maps from tomtom home as the touch pro is now recognised by the tomtom home application (version 2.4 or above)
ardsar said:
The traffic subscription is registered to your account, therefore it will work on version 6 or version 7. However, your maps (6.75?) will not work with tomtom 7, but you can purchase new maps from tomtom home as the touch pro is now recognised by the tomtom home application (version 2.4 or above)
Click to expand...
Click to collapse
Thanks for that.... Do you know if there are any advantages with tt7 over tt6 other than newer maps?
and
when tt do official release tt7 will it inc a cab/install file?
many thanks again
ALL Working Fine
Test handset with GPStest, works fine.
Change GPS setting to com4 speed 9600, wait 2mins and got a signal.
TomTom 6.030 loaded and working
Thanks to all for your help and avice.
ryraum said:
Ran GPS test, shows GPS working.
Set GPS to com4 9600, took about 2 mins and found signals.
Works fine fine with TOMTom 6.030
Thanks for all the help.
Click to expand...
Click to collapse
I'm also facing a similar problem. Google Maps is unable to detect the internal gps receiver.
When I run, GPS Test, it just shows the GPS starting up message (with 2 yellow bars, sometimes only one). I have run quick gps and downloaded the satellite data twice already.
Can somebody please help me?

Shared GPS Port

Is there a known problem with the shared GPS port on the X7510?
If I use 3dtracking (http://free.3dtracking.net) it just locks up (the app, and sometimes the machine), but it's find on the direct port, but that locks out other GPS apps, eg. TomTom.
Recently I started using Google Latitude, and after a while with TomTom as the focus, it (TomTom) loses the satellite lock, and when I switch to Google Maps it starts with "Initializing GPS" and also picks up nothing. A reset is necessary to get GPS working again.
Anyone else had similar problems?
Ponder said:
Is there a known problem with the shared GPS port on the X7510?
If I use 3dtracking (http://free.3dtracking.net) it just locks up (the app, and sometimes the machine), but it's find on the direct port, but that locks out other GPS apps, eg. TomTom.
Recently I started using Google Latitude, and after a while with TomTom as the focus, it (TomTom) loses the satellite lock, and when I switch to Google Maps it starts with "Initializing GPS" and also picks up nothing. A reset is necessary to get GPS working again.
Anyone else had similar problems?
Click to expand...
Click to collapse
I'm seeing a similar issue, though no locking.
SatNav programs (TomTom and iGO8) can see the GPS Port on either COM4 or COM5
Spb Weather, which does not have any GPS Port configuration options, so must use the MS GPSID cannot obtain data from the GPS receiver.
Spb Weather can turn the GPS receiver on, as it starts the amber LED flashing, but no data is extracted, and the location query fails. It then fails to turn the GPS off again.
It works fine on the HTC Diamond

No signal on ATT Fuze (using TOM TOM 6.032)

having issues with my Fuze as i recently installed TOM TOM 6.032. I have tried playing around with the Baud and COM settings but i get the same message "No Valid GPS signal".
i have tried changing the GPS receiver types and also by enabling Bluetooth and etc.
Please help!!
a) can you get a GPS lock using ChartCross GPS or the HTC GPS app?
b) are you sure you set TomTom to COM4, BaudRate 4800 or 9600?
-> make sure you get a GPS lock using the apps in (a), then close that app, then launch TomTom... TomTom shouldn't take more than a minutes to get a GPS lock since this is a hot start

tomtom not showing satellites a-gps?

Hi all,
I have installed tomtom7 on the TD2 and I have used the following settings:
other NMEA receiver 4800 baude rate com 4
although it is very slow to lock on I do get a signal and it works ok
(had it in the car comparing it to a tomtom go and it was pretty good)
but when i get look at the satellite ino it shows the position but no satellites at all ( the go had locked onto 9)
not a huge problem but one i would like to address
could this ( or the incredibly slow lock on) be related to the AGPS
as ever may thanks in advance
Andy

Samsung Omnia Pro B7330 - Problems with TomTom internal GPS

Hi @ all,
first of all a happy new year
I wonder if anyone has the Omnia B7330 running with TomTom 7 on it. I have the problem that TomTom doesn't find the internal GPS. I tried all possible settings with
"internal GPS"
" other NMEA GPS"
and all possible Baud rates and com Ports
but TomTom does not find the internal GPS.
In the meantime I wonder if perhaps the internal GPS might be damaged and I should send the device back??
On my HTC Snap (Maple) TomTom recognizes the internal GPS immediately.
I als tried to manage something concerning "Port Splitter", but most of these programs are not for WM without touchscreen....
Any ideas how to get this working?
Best Regards
Jolig
Hi, if you want to know if your device is working or not, try GPS Test 1.04. There is a cab file for it, "google is your friend" as they say. 8) If you run the program (it is good for non-touchscreens as well) and it can find a signal, then you have to fine tune your navigation software, if no signal, then you have a faulty device.
Happy New Year!
Welcome to forums
Hope this helps:
http://cellphoneforums.net/samsung/
Good luck,
Same Thing here...
...the Testapp recognizes the GPS on COM3 with 9600Baud and can work with it. The GPS Module seems to be working well, found my position after 10secs. TomTom however can't work with the GPS-Module... I'm on TomTom 7.910.
Any idea?
JC
Try this
-----Omnia Configuration-----
Settings\Hardware\External GPS
*GPS program port: COM2
*GPS hardware port: COM9
- Baud Rate: 9600
*Manage GPS automatically: YES
------Tomtom Configuration-----
*GPS NMEA
*Baud rate 4800
*COM2
IMPORTANT
When you make all the steps you have to see in the Satellites top/right windows of the tomtom a little Yellow/Black ball rolling, that means the GPS is working. You only have to wait to your Omnia GPS find the signal.
-> You can download an XTRA GPS DATA to improve the finding speed of the GPS, personally I can not see the diference between NO XTRA DATA and XTRA DATA.
Settings\Hardware\Enchanced GPS
*Enable XTRA DATA CONNECTION
*Disable automatically download.
*Press download button
With that configuration in my omnia I don't have any problem with Tomtom.
The Testapp also recognizes the GPS on COM3 on my B7330.
But it dosen't work on TomTom 7.910.
Is there a way to change the GPS to use COM2 ?
tom tom
Hello!
Do this:
use another phone with touch screen, set the tom tom gps as an external port and the appropriate speed,
save your settings. fire up tomtom on omni pro b-7330.
Can you type the addresses correctly? I had a problem with another phone with qwerty by tomtom7.
Erroneous indication of gps in omni pro B-7330 / no fix
Erroneous indication of gps in omni pro B-7330 / no fix
I need help, my gps in the B-7330 incorrectly indicates the distance of some 400km,
Is it a bug?
after uploading the google maps, fix grabs for a few seconds, and incorrectly states the place automapa (another program to navigation) also indicates the wrong place but other than google maps, the difference of some 1000km.,
I used GPSTEST 1.04:
COM3: 9600kb.
Is it firmware bug, or damage is hard?
using the settings from the post in advance Com9: omnia has gps pro, but did not catch the fix - no signal satleitów.
So, are you sure the port Com9?
So I need help
You should try posting on the proper section for this non HTC device:
http://forum.xda-developers.com/filter.php?cat=Samsung
TomTom GPS Problem
chindley said:
-----Omnia Configuration-----
Settings\Hardware\External GPS
*GPS program port: COM2
*GPS hardware port: COM9
- Baud Rate: 9600
*Manage GPS automatically: YES
Click to expand...
Click to collapse
Hi,
where did you find the external gps setting at the omnia. Cannot find them. thanks for your help.
Samsung Omnia B7330 and Tomtom Navigator 7
I am having the same trouble as the people above and cant get tomtom to see the internal gps - any help would be much appreciated.
thebiff said:
I am having the same trouble as the people above and cant get tomtom to see the internal gps - any help would be much appreciated.
Click to expand...
Click to collapse
TomTom is pants on the 7330.
I'm using Route 66 (v7) with UK and Europe maps. GPS can be interigated through the menu and cold fix is quicker than most I've used.
No GPS lag, and other than the soft button icons sitting above the call and call end buttons (can cause confusion), I would recommend going down this route instread (no pun intended)
Also strangely, the 'browse map' facility is managed through the 'zoom to' function.
Alan.

Categories

Resources