Hi all,
I have installed tomtom7 on the TD2 and I have used the following settings:
other NMEA receiver 4800 baude rate com 4
although it is very slow to lock on I do get a signal and it works ok
(had it in the car comparing it to a tomtom go and it was pretty good)
but when i get look at the satellite ino it shows the position but no satellites at all ( the go had locked onto 9)
not a huge problem but one i would like to address
could this ( or the incredibly slow lock on) be related to the AGPS
as ever may thanks in advance
Andy
Related
Hi everyone ... i have a big problem.
i use my HTC S710 ex dopod c500 as navigation equipemnt too
software i use is ROUTE 66 MOBILE 7 and gps bluetooth device Garmin GPS10
i not used it for a while about one month. Now i try to use but software tell me that cant estabilesh connection with GPS device. i try to reinstall software ... hard reset phone ... change rom ... but still not work ...
GPS device work cz i trye to conned it with navigation software on notebook and work well ....
I test mobile bluethoot tranfering files and work well ... he see GPS device and pair well ....
so ... why smartphone cant connect with GPS?
thanks everyones
Try with other software like Efficasoft GPS Utilities
I try with Efficasoft GPS Utilities as you told me ... but still not work. Software see my device, estabilish connection ... something happen : i can see altitude incerase and decrease ...
i dunno how to post here pic of my mobile screen ... any way this happen ...
only Alt. change ... N and E always 000000 Sat 6/0 some times 5/0 ... when i tun off gps ... GPS utilities give me error ... so mean mobile and gps in some way comunicate.
I try with TOM TOM ... not work too ....
i feel problem is in mobile's bluetooth configuration.
i try creating "new outgoing port" in mobile .... set com6 and com7 ...
same ... no work
really dunno why some weeks ago work perfect .. and now not
try again gps and notebook ... work perfect
plsss help meeee
i try again today ... driving car GPS on and Efficasoft GPS utilities on .... the only data i can get from satellite is Altitude ....
sat always .... 5/0 .... dindt get N and E
pls help meee ....
why before work .. and now not?
hi
you must name the gps "OTHER BLUETOOTH GPS"
when you sync it with the phone
it will work well with tomtom and other soft
I don,t know with tomtom but with Efficasoft GPS Utilities you must check in Menu->GPS Setup->AutoSearch Bluetooth GPS reciver, and see if there is your device, or choose manual your device.
After that don't forget to go to Menu->Start GPS
matrix77 said:
I don,t know with tomtom but with Efficasoft GPS Utilities you must check in Menu->GPS Setup->AutoSearch Bluetooth GPS reciver, and see if there is your device, or choose manual your device.
After that don't forget to go to Menu->Start GPS
Click to expand...
Click to collapse
i try in this way exactly .... he find my GPS ... but after start GPS in main menu ... can get only altitude.
i just reinstalled HTC official ROM ... but still the same.
i changed navigation software with Garmin Mobile XT and maps from Mapsource.
work perfect ...
sunno why with garmim software work but other software nop.
My Gps module is garmin gps 10d ... maybe now work only with garmin software .. but i know before i used with tomtom and route 66.
anyway ... garmin mobile xt is good too
tnks
Good morning I have a probleme with Garmin XT and my HTC VOX it connect has my GPS but rest blocked on research satellite
install this cab and then try
View attachment enablegps.CAB
it has few registry tweaks enabling gps connection
this will help you connect
his step always not
I think your GPS programs might have been "fighting" for the GPS data or that it had bad epheremis data. It is recommended that with WM 6.1 and above to have the GPS "managed" by the system.
You do this by going from the Start Menu to Settings to System and select External GPS. Then you want to select the Port your programs will use to obtain GPS data. Normally the four lower ones were commonly used by most computer systems which is why I recommend selecting COM9 as the port.
On the Hardware tab, you need to identify which Port your GPS is on. I used GPSToggle, which is a Today plug-in, to start and warm up my GPS. You can read about GPSToggle here: http://www.freewarepocketpc.net/ppc-download-gps-toggle.html.
Download the CAB file which I recommend installing to your device internal memory. Then go to your Today screen and then to Settings menu followed by Today. On the Items check the box next to BAF GPS Toggle. Click okay and this will place GPSToggle on your Today screen.
Unfortunately most smartphones do not have dedicated GPS chips because they eat battery power. On a dedicated receiver like a Personal Navigation Assistant (handheld GPS aka PNA), the GPS is turned on automatically when the PNA is powered up. Depending upon when your GPS was last activated, a dedicated SIRF chip can go from cold-start to 3D fix in as little as 42 seconds and as long as three minutes if epheremis data is present and the GPS has not been moved more than 10 miles from its last power up.
For most smartphone users, the last time your GPS was fired up was when it was built in China or wherever. The GPS can retain that information as its old epheremis data which is used to communicate with satellites. If the data is bad and old, it can take much longer for your GPS to lock-on and get a 3D fix.
For this reason, it is recommended that on smartphones that a GPS utility like the ones mentioned above be used. In essence, the smartphone's GPS must be "warmed up" from a cold start state to warm state where it is communicating with satellites in resolving a 2D fix ultimately to hot state where 3D fixing is available.
GPSToggle on your Today screen will "warm up the GPS" for you when you turn it. You will then see bars indicating the number of satellites the GPS has found. Once it syncs with them, the bar will go solid. When four bars go solid, 3D fixing is available. At that point you could turn on your satnav program and should be good to go.
If you see the altitude and nothing else comes in then the BT connection is obviously ok, so pairing, establishing the connection via COM port and the program using the connection seems ok.
Your problem then is the GPS receiver not sending the data required.
Find a program that resets the GPS receiver, if you can remove the battery put it out for half a minute and reinsert it. Once the GPS has a satelite fix again it should deliver all data.
A good free powerful utility is SirfTech - obviously only useful if your BT Mouse has a SIRF chipset.
prajith said:
install this cab and then try
View attachment 82758
it has few registry tweaks enabling gps connection
this will help you connect
Click to expand...
Click to collapse
Hello, was enablegps.cab developed here on xda? If so, is there a thread on it?
Is there a known problem with the shared GPS port on the X7510?
If I use 3dtracking (http://free.3dtracking.net) it just locks up (the app, and sometimes the machine), but it's find on the direct port, but that locks out other GPS apps, eg. TomTom.
Recently I started using Google Latitude, and after a while with TomTom as the focus, it (TomTom) loses the satellite lock, and when I switch to Google Maps it starts with "Initializing GPS" and also picks up nothing. A reset is necessary to get GPS working again.
Anyone else had similar problems?
Ponder said:
Is there a known problem with the shared GPS port on the X7510?
If I use 3dtracking (http://free.3dtracking.net) it just locks up (the app, and sometimes the machine), but it's find on the direct port, but that locks out other GPS apps, eg. TomTom.
Recently I started using Google Latitude, and after a while with TomTom as the focus, it (TomTom) loses the satellite lock, and when I switch to Google Maps it starts with "Initializing GPS" and also picks up nothing. A reset is necessary to get GPS working again.
Anyone else had similar problems?
Click to expand...
Click to collapse
I'm seeing a similar issue, though no locking.
SatNav programs (TomTom and iGO8) can see the GPS Port on either COM4 or COM5
Spb Weather, which does not have any GPS Port configuration options, so must use the MS GPSID cannot obtain data from the GPS receiver.
Spb Weather can turn the GPS receiver on, as it starts the amber LED flashing, but no data is extracted, and the location query fails. It then fails to turn the GPS off again.
It works fine on the HTC Diamond
Hi there,
Have been trying to setup the gps signal on my dads touch pro (raphael), however it seems incapable of getting any kind of GPS receipt.
I've installed HTC GPS tool to test this and have tested 57600 (default) and now 4800 baud rate. It does not seem to get ANY response, does not find a satellite whatsoever. I've also set it to cold start, and have run quickgps beforehand.
What settings do you guys use to get a GPS fix and do you have any suggestions for me?
Rom version is latest official, so is radio. No hardspl or any of that stuff installed, stock touch pro.
boud will make no difference at all
it's an old leftover from when gps was serial rs232 connected
and even back then it would make no difference as long
as the wired gps supported the chosen boudrate
preciously few data is being transmitted from a gps
but mind you it's rare to get a gps to work inside try outside or in a car
there they work
use ChartCross GPS app
it auto detects GPS and gives you indication on the progress of getting the GPS fix
usually it's COM4, baud could be 4800, 9600 (i've used these two) or anythinf
cold fix indoors (with QuickGPS almanac downloaded), i could get one indoors in 5 minutes... less than a minute outside of course
having issues with my Fuze as i recently installed TOM TOM 6.032. I have tried playing around with the Baud and COM settings but i get the same message "No Valid GPS signal".
i have tried changing the GPS receiver types and also by enabling Bluetooth and etc.
Please help!!
a) can you get a GPS lock using ChartCross GPS or the HTC GPS app?
b) are you sure you set TomTom to COM4, BaudRate 4800 or 9600?
-> make sure you get a GPS lock using the apps in (a), then close that app, then launch TomTom... TomTom shouldn't take more than a minutes to get a GPS lock since this is a hot start
Hi @ all,
first of all a happy new year
I wonder if anyone has the Omnia B7330 running with TomTom 7 on it. I have the problem that TomTom doesn't find the internal GPS. I tried all possible settings with
"internal GPS"
" other NMEA GPS"
and all possible Baud rates and com Ports
but TomTom does not find the internal GPS.
In the meantime I wonder if perhaps the internal GPS might be damaged and I should send the device back??
On my HTC Snap (Maple) TomTom recognizes the internal GPS immediately.
I als tried to manage something concerning "Port Splitter", but most of these programs are not for WM without touchscreen....
Any ideas how to get this working?
Best Regards
Jolig
Hi, if you want to know if your device is working or not, try GPS Test 1.04. There is a cab file for it, "google is your friend" as they say. 8) If you run the program (it is good for non-touchscreens as well) and it can find a signal, then you have to fine tune your navigation software, if no signal, then you have a faulty device.
Happy New Year!
Welcome to forums
Hope this helps:
http://cellphoneforums.net/samsung/
Good luck,
Same Thing here...
...the Testapp recognizes the GPS on COM3 with 9600Baud and can work with it. The GPS Module seems to be working well, found my position after 10secs. TomTom however can't work with the GPS-Module... I'm on TomTom 7.910.
Any idea?
JC
Try this
-----Omnia Configuration-----
Settings\Hardware\External GPS
*GPS program port: COM2
*GPS hardware port: COM9
- Baud Rate: 9600
*Manage GPS automatically: YES
------Tomtom Configuration-----
*GPS NMEA
*Baud rate 4800
*COM2
IMPORTANT
When you make all the steps you have to see in the Satellites top/right windows of the tomtom a little Yellow/Black ball rolling, that means the GPS is working. You only have to wait to your Omnia GPS find the signal.
-> You can download an XTRA GPS DATA to improve the finding speed of the GPS, personally I can not see the diference between NO XTRA DATA and XTRA DATA.
Settings\Hardware\Enchanced GPS
*Enable XTRA DATA CONNECTION
*Disable automatically download.
*Press download button
With that configuration in my omnia I don't have any problem with Tomtom.
The Testapp also recognizes the GPS on COM3 on my B7330.
But it dosen't work on TomTom 7.910.
Is there a way to change the GPS to use COM2 ?
tom tom
Hello!
Do this:
use another phone with touch screen, set the tom tom gps as an external port and the appropriate speed,
save your settings. fire up tomtom on omni pro b-7330.
Can you type the addresses correctly? I had a problem with another phone with qwerty by tomtom7.
Erroneous indication of gps in omni pro B-7330 / no fix
Erroneous indication of gps in omni pro B-7330 / no fix
I need help, my gps in the B-7330 incorrectly indicates the distance of some 400km,
Is it a bug?
after uploading the google maps, fix grabs for a few seconds, and incorrectly states the place automapa (another program to navigation) also indicates the wrong place but other than google maps, the difference of some 1000km.,
I used GPSTEST 1.04:
COM3: 9600kb.
Is it firmware bug, or damage is hard?
using the settings from the post in advance Com9: omnia has gps pro, but did not catch the fix - no signal satleitów.
So, are you sure the port Com9?
So I need help
You should try posting on the proper section for this non HTC device:
http://forum.xda-developers.com/filter.php?cat=Samsung
TomTom GPS Problem
chindley said:
-----Omnia Configuration-----
Settings\Hardware\External GPS
*GPS program port: COM2
*GPS hardware port: COM9
- Baud Rate: 9600
*Manage GPS automatically: YES
Click to expand...
Click to collapse
Hi,
where did you find the external gps setting at the omnia. Cannot find them. thanks for your help.
Samsung Omnia B7330 and Tomtom Navigator 7
I am having the same trouble as the people above and cant get tomtom to see the internal gps - any help would be much appreciated.
thebiff said:
I am having the same trouble as the people above and cant get tomtom to see the internal gps - any help would be much appreciated.
Click to expand...
Click to collapse
TomTom is pants on the 7330.
I'm using Route 66 (v7) with UK and Europe maps. GPS can be interigated through the menu and cold fix is quicker than most I've used.
No GPS lag, and other than the soft button icons sitting above the call and call end buttons (can cause confusion), I would recommend going down this route instread (no pun intended)
Also strangely, the 'browse map' facility is managed through the 'zoom to' function.
Alan.