Related
Hello,
I have a CID-Locked QTEK S200 (G4 Version). Its language was originally Portuguese and through some info collected in this forum i managed to successfully change its language to English, leaving IPL and SPL untouched. So far so good.
What if i want to update the Radio ROM?
If i use this RUU
Code:
Prophet_G3_G4_RadioRom_v2.61.21.exe
Will this mess up with IPL and SPL or will it just update the radio rom and everything keeps working as it is?
Thanks
Code:
Prophet_G3_G4_RadioRom_v2.61.21.exe
doesn't include ipl and/or spl so you can succesfully install it
Even if it's a G4 CID-Locked device?
yes, I have G4 CID-locked prophet and it works perfect
I don't remember right now if I had to use NV-ID so you have to try by yourself
Ok thanks, i'll try it out
Yep, i upgraded the device this morning and up till now seems to be working perfectly. Thanks for the info.
qtek s200 to english
Hi namco,
I`m new to s200, could you please explain how to change the language to English on my Qtek s200???
My sim is also locked by another provider and it doesn`t reconize my SIM card.
Any Advice on this ??
Thank You
BR
Gjergji
just upgrade your device to any available English ROM.
about SIM locked, search for unlocking tools in this forum..Im sure you'll find it!
Hi,
clustered just gave you the answer
And yes, there are a few posts in the forum that explain how to unlock your S200 so you can use any simcard you want.
sorry to hijack ur thread. thinking of upgrading radio rom as well to my dopod 818 pro G3 device. sorry to be a noob but what does the radio rom do?
will it make my phone have better reception?
Hello people.
Yesterday i tried to upgrade my i-mate JAMin to WM6 but i couldn't do it.
anyway, because i couldn't upgrade it to WM6, after i upgrade to 2.40 WWE when i arrived at home i've tryed to upgrade to 2.13_Portuguese_ROM...
Here was when the problem started.
When updrade started, at 1% the problem ocurred... message ERROR.
From what i've read I need a flash ROM, I'm desperate...
Can any one help to find the flash ROM and how to recover my PPC?
Best Regards
Thank's in advance.
(Faria, ajuda-me! sei que podes fazê-lo nem que seja orientando-me em português...)
where did you get 2.40 WWE
you need No Vindor ID to install the ROM
please give your IPL SPL (G3 or G4), what error message?
but your problem can be solve I'm sure, don't do anything you don't know what it is
ask before every step !!!!!!ok
Again, would people please read through the forum carefully before starting a new thread and ask the same questions over and over again. It is not that I am mean (just getting old), because any new thread will take time to read. Why not the person who need answer to read first and save other people's time. I found this forum contains so much information that most problems people generally ask are well covered one way or the other.
you may right, but human is talking here, we are not machines, human did mistakes and sometimes even if read it new people hard to get it, they need it step by step
if you don't want to help please don't reply, leave it a lone and it will go to the end with no replies
I've seen a lot of replies like yours witch they are not nice I think they have to be deleted
sorry for beeing rude, but we are human
paradis_pal said:
where did you get 2.40 WWE
you need No Vindor ID to install the ROM
please give your IPL SPL (G3 or G4), what error message?
but your problem can be solve I'm sure, don't do anything you don't know what it is
ask before every step !!!!!!ok
Click to expand...
Click to collapse
Hello paradis, and everyone else.
Thank you for you quick reply and support.
Starting to answering your questions:
- My i-mate is G3
- ERROR [320~328] : INVALID COMMAND
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.
About the ROM 2.40..., i'm confused and since i can't read my i-mate i don't know the correct version but it was downloaded here in this forum.
Regards
reinstall the 2.20.7.37 wwe using the NO VINDOR ID NVID
look for RUU_Prophet_220734_2207114_024721_NVID.exe you can find it here
then unlock CID see the WIKI how to
and then install any ROM you want
What is you SPL Version?
NetrunnerAT said:
What is you SPL Version?
Click to expand...
Click to collapse
this not SPL problem
the arror at 1% is becasue of changing the langauge he just need NO VINDOR ID
that is all
and I want him to unlock CID, please do my steps
If he have SPL 3.08 -> CID Unlock doesnt work -> Device report wrong DeviceID and CID ^_^
paradis_pal said:
reinstall the 2.20.7.37 wwe using the NO VINDOR ID NVID
look for RUU_Prophet_220734_2207114_024721_NVID.exe you can find it here
then unlock CID see the WIKI how to
and then install any ROM you want
Click to expand...
Click to collapse
Thank's paradis_pal
My i-mate came back to live, tank you so much.
I fallowed your instructions and the problem was solved.
Best Regards.
As i said, my i-mate is biack to life.
I try to unlock CID, but the link ftp://xda:[email protected]/Uploads/Prophet/pdamobiz.com_downgrade_and_unlockcid.rar is not working.
Can any one put it on working?
NetrunnerAT said:
If he have SPL 3.08 -> CID Unlock doesnt work -> Device report wrong DeviceID and CID ^_^
Click to expand...
Click to collapse
dear net if he has 3.08 the 2.20 will not be installed, I know what I'm writting
but thanks for the advice
I think you can find it at pdamobiz.com
but please unlock cid before doing anything
paradis_pal said:
I think you can find it at pdamobiz.com
but please unlock cid before doing anything
Click to expand...
Click to collapse
Hello.
Sorry for responding so late.
Right now my i-mate is Cid Unlocked and working with WM6 Prophet_4.0.0.0.3_PV just fine.
I´m Going to try and explore this (Beautifull) Rom and post my feedback.
Once more thank you for your help, atention and support.
Best Regards.
msylva said:
Hello.
Sorry for responding so late.
Right now my i-mate is Cid Unlocked and working with WM6 Prophet_4.0.0.0.3_PV just fine.
I´m Going to try and explore this (Beautifull) Rom and post my feedback.
Once more thank you for your help, atention and support.
Best Regards.
Click to expand...
Click to collapse
As I said before, the feedback for this rom is just... GREAT.
Better than this only if it was in Portuguese (for me, off Corse), because in these rom theres no Portuguese GPRS configurations.
Regards.
Hello to everybody,
anybody has got an official version of this rom or know a place to download it? I think a WWE version of that can be fine.
Thanks
pippopluto1970 said:
Hello to everybody,
anybody has got an official version of this rom or know a place to download it? I think a WWE version of that can be fine.
Thanks
Click to expand...
Click to collapse
WWE is World Wide Englisch correct me if im wrong
you can find the reconstructed t-mobile rom here:
http://forum.xda-developers.com/showpost.php?p=1586817&postcount=2
The Wiki is always your friend!
http://forum.xda-developers.com/showthread.php?t=369282 !!!!!!
Search and you will find everything you want to know about flashing roms etc.
steph
Yep that's right. Not only that T-Mobile didn't yet release 6.1 for the Vario III, they don't even provide any kind of an update for the old 6.0
Acoording to their regulations of course, you wouldn't need this ROM since you're not supposed to replace it anyway...
Stefan
T-Mobile vario 3 official rom
Can't use the reconstructed cause my hard-spl had a bad installation and my kaiser stucks in the boot mode , so only an original rom that doesn't check for country and vendor IDs can save me.
I don't need an update , but just any version installable on this device to let me install in the right way hard-spl.
In my Diamond the hard-spl installation was fine , I was unlucky with the kaiser , mtty commands can't help me , just proved.
pippopluto1970 said:
Can't use the reconstructed cause my hard-spl had a bad installation and my kaiser stucks in the boot mode , so only an original rom that doesn't check for country and vendor IDs can save me.
I don't need an update , but just any version installable on this device to let me install in the right way hard-spl.
In my Diamond the hard-spl installation was fine , I was unlucky with the kaiser , mtty commands can't help me , just proved.
Click to expand...
Click to collapse
The version you need doesn't exist...
edit: What's on the phone now? The normal SPL? But a cooked ROM??!!
Since that's impossible to my knowledge I assume that you are stuck in Bootloader with the normal SPL and the official ROM is still flashed but doesn't boot. If that's the case you might hypothetically (I'm not suggesting you do ;-) )try taking it to a T-Mobile store and tell them it just stopped working.
maybe you´ll find help in this thread:
http://forum.xda-developers.com/showthread.php?t=371154
or you can pm one of the masters...
Unfortunately I'm from Italy and there' re no T-mobile sellers in my country.
Normally I should not use that phone , taken from ebay at very cheap price.
I must be patient and wait for an update from tmo for the vario III ...
thanks to everybody
Hello,
I have recently bought a AT&T Tilt, and would like to flash to the current Offcial HTC WM 6.1 ROM.
I have done alot of reading in the wiki here and various FAQ threads and what not. But i am still a bit confused with a few things.
I have read the ROM Flashing faq and Intro here:
http://forum.xda-developers.com/showthread.php?t=356895
And i understand all that.
I also undestand that i need the Key board fix from here:
http://forum.xda-developers.com/showthread.php?t=334911
But thats not hard.
I went here:
http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
I checked my device and the rom currently on it is the AT&T WM6.0 1.57.502.2 Original Shiped Rom.
I figured, being in Australia, i would need rom that had WWE as the country? So i downloaded the "RUU_Kaiser_HTC_WWE_3.28.405.0_radio_sign_25.83.40.02_1.65.16.25_Ship" rom. Is this an appropriete ROM for what i want?
BUT Its all this stuff about SPL's and what not that is confusing me.
My Tilt is SIM unlocked because i am using it on the Telstra network here in Australia. But im not sure if i have to change SPL's or not and if so, which spl i need and how to change it?
It would be greatly appreciated if someone was able to help me understand this SPL bussiness, because i really dont want to dive straight in a risk my device. I have done a fair bit of reading and i'm a fairly competent computer user so it won't take me long to learn.
Thanks in advance,
eMiller
you have to CID unlock it. this involves flashing the device with HardSPL then running a unlocker program. (this is what i know from Hermes, so i don't know if it is exactly the same on Tilt). It breaks the warranty though, so think first, then jump
by the way, you should try a cooked rom. in my experience, HTC roms are not that good, except for getting a stable radio. get the radio, then get a new OS rom, like hang.tuah or something.
warsng said:
you have to CID unlock it. this involves flashing the device with HardSPL then running a unlocker program.
Click to expand...
Click to collapse
Ok thanks. Can someone please recomend the best hardSPL and unlocker program for my needs. What do other people with Tilts recomend?
here you go
eMiller12 said:
Ok thanks. Can someone please recomend the best hardSPL and unlocker program for my needs. What do other people with Tilts recomend?
Click to expand...
Click to collapse
Try this one:
http://forum.xda-developers.com/showthread.php?t=334679
Look for the Zip file at the very bottom of the screen this hard spl will let you flash any rom (follow the instructions the spl gives you exactly and dont get nervous if it appears stiuck for a bit), just make sure you know which ROM you really want to flash at the end
.
Again same stuff.
Guys, when you gonna learn to read everything which is realted to your device when you want to do something?
Everything is in Wiki, everything you need is posted in ROM threads.
Come on GUYS!
read the f**** wiki. you need hardspl. its not that hard to figure out if your not an imbisel
@joel2009: That is a little harsh. Also, if you're going to call someone an imbecile, you should probably spell it right.
@eMiller12 (fellow noob): I don't know if I would bother with the HTC ROM, I just flashed it and I am finding a few really annoying bugs... Read Jocky's STICKY post about the HardSPLs to learn how to flash one. It really is quite simple--and it's unlikely that you're going to brick your device, so no worries.
Hey FireMedic, thanks for understanding.
I have read through the Wiki a fair bit, i was just unsure which versions of hardSPL etc where best for the [email protected] Tilt inparicular. But i will just use this one that vorostatz recomended if that is the best one for the tilt.
joel2009 said:
read the f**** wiki. you need hardspl. its not that hard to figure out if your not an imbisel
Click to expand...
Click to collapse
We are not all senior members. I can fully understand the guys wish not to turn his expensive device into a paperweight. Ease up eh?
search forums using google (at top right)
yeah, exactly... I was pretty scared to hardspl when I first started.
Hardspl 3.29 seems to be the best one, check my signature after you've read the hardspl sticky.
From what I understand, a rom flash might try to write a different spl which is obviously bad. hardspl prevents this.
If you ever need to, you can undo it. Kyphur explains in the hardspl sticky how to change them, by running a program named jumpspl 1.56 (on your device) with your sim and sd cards out and then flashing the spl normally.
Just make sure you follow directions for your device and try different roms.
Good luck and feel free to ask questions, even if some of the people here have heard them way too often.
Special ROMs for Australia
eMiller12 said:
I checked my device and the rom currently on it is the AT&T WM6.0 1.57.502.2 Original Shiped Rom.
I figured, being in Australia, i would need rom that had WWE as the country? So i downloaded the "RUU_Kaiser_HTC_WWE_3.28.405.0_radio_sign_25.83.40.02_1.65.16.25_Ship" rom. Is this an appropriete ROM for what i want?
Click to expand...
Click to collapse
Actually the WWE (World Wide English) one seems to be used more in Europe and this side of the world. For down-under, they use SEA South East Asia versions. There are issues with ROM compatibility in Australia specifically (at least in the WM 6.0 days) so if you want to know the best official WM 6.0 and 6.1 ROMs, short of searching for what setups Australian xda-dev forum members are using, you could look at the devices on sale in the shops. If you're wanting WM 6.1 just to have the latest and greatest, think again and have a look at the Windows Mobile 6 vs. Windows Mobile 6.1 thread.
***Edit*** Also note that there are two Australian specific ROMs in the WM 6.0 section of the Kaiser HTC ROM wiki
PREVIOUS COMMENTS:
Default Kaiser Rom???
Just got a Kaiser for ATT USA, i have it updated to the WM6.1 from ATT. But I'd really like to use on the cooked ROMs from this site. I've used a lot when I had a T-Mobile Wing.
Here is info on my phone
Rom Ver: 3.57.502.2 WWE
Radio: 1.65.21.18
What ROMs can I use?
NOTE: I'm still using T-Mobile and would like something that will work with the MMS and email...
NEW COMMENTS:
Maybe I should have worded that differently...
What I mean is that I am a new Kaiser owner, I do NOT know how to update the ROM, I took the suggestion at the end of my first post which was to read the Sticky's. I did that I followed different directions. HOWEVER, i can not get the hardSPL to update or install. So that is now my question. If that won't update, I won't be able to update my ROM???
Please do not make new threads when threads exist.
[Resources] Flashing Your First Kaiser Rom (For Noobs)
Follow guide any ?'s ask in the thread.
Closed.
You should put this post in the Kaiser General Question, cos more people will help you out then, i havent had my HTC TyTN II long and i followed the instructions from the stickies and everything worked, i installed hardspl without no problems whatsoever, so i dnt know whats going wrong with yours, normally when the phone starts up it should tell you which hardspl you have in red writing along with Radio version and Rom info, if you tried to install hardspl 3.29 and it worked then it will say that when the phone begins.