Related
No GPRS for me Even upgraded Radio ROM and still no dice.... is there a fix for this or am I doomed?
Actually - i can send texts so seems like this is some sort of a WM6 bug... anyone?
VanFanel said:
No GPRS for me Even upgraded Radio ROM and still no dice.... is there a fix for this or am I doomed?
Click to expand...
Click to collapse
Mine works. Where are you? Which provider? Which phone? etc etc.
--M
GPRS worked straight away for me after installing this ROM. Did you select the right provider when you setup your phone? You can rerun that (to verify) by going to Start > Programs > Accessories > Operator cfg (The phone will have to do a soft reset after this runs).
if u use T-Mobile change to wap.voicestream.com
My GPRS died as well. I had to flash the rom and the radio multiple times. I am using T-Mobile US. Radio 2.19.
MaciejN said:
My GPRS died as well. I had to flash the rom and the radio multiple times. I am using T-Mobile US. Radio 2.19.
Click to expand...
Click to collapse
I have Cingular with an MDA (unlocked); I selected the right provider, checked all my settings... the "G" or "E" icons do not even appear; i just have two arrows and an "x"
Check your settings here for GPRS:
https://www.cingular.com/support/deviceConfig.do?content=KB56475.html
Check here for MMS:
https://www.cingular.com/support/deviceConfig.do?content=KB56044.html
T-Mobile US
Radio: 2.25.11
No problems with GPRS here.
trojan9x said:
Check your settings here for GPRS:
https://www.cingular.com/support/deviceConfig.do?content=KB56475.html
Check here for MMS:
https://www.cingular.com/support/deviceConfig.do?content=KB56044.html
Click to expand...
Click to collapse
They've all been triple checked; the GPRS icon doesnt even appear - period.
VanFanel said:
I have Cingular with an MDA (unlocked); I selected the right provider, checked all my settings... the "G" or "E" icons do not even appear; i just have two arrows and an "x"
Click to expand...
Click to collapse
The two arrows and the "X" means your Wi-fi is on, but cant find any wifi or hotspot connection. Go to comm manager and turn of the wifi.
here is a silly question.
Go into your comm manager and see if your Phone icon is on or off. (look to see if it has an X on it). If it is on, turn it off.. wait a minute... then turn it back on and see if that helps. Sounds like your phone is stuck in flight mode.
Mr Rulas said:
The two arrows and the "X" means your Wi-fi is on, but cant find any wifi or hotspot connection. Go to comm manager and turn of the wifi.
Click to expand...
Click to collapse
Wifi was off at the time - I made sure it was. I rebooted the phone multiple times with no avail...
did you try what i mentioned?
VanFanel,
Yes, I had the same problem with Faria's AKU3.3 rom. I'm using Tmobile and for some reason, nothing would allow it to reconnect to GPRS after about 1 day of use. Tried soft reseting, pulling the battery, disabling wifi, disabling and re-enabling the phone, making new connections profiles, disabling push, disabling activesync OTA, etc. You name it, I looked into it. I did a hard reset on the phone and it worked again for about a day and then just refused to connect again. Finally, I just installed the MB WM6 rom and everything has worked for the past week or so. The GPRS connection did pop up with an X for about 1/2 a day, but I have a feeling that was actually caused by Tmobile's network being down or unreachable in the area (thunderstorms), because GPRS was connected again in the morning. I never did figure out what exactly was wrong but I feel your frustration.
Doc
trojan9x said:
did you try what i mentioned?
Click to expand...
Click to collapse
Yessir did that - nothing.
Doc_lee - excatly but i did not even have connection period. The funny thing I tried the mUn WM6 ROM and that worked just dandy, then I upgraded to Farias - and no dice, then I downloaded to Farias AKU 3.3 and it works just dandy.
Blah - I'll wait for the next revision
Solution!
I know why!
If you use "registry Wizard" you need to reenter your password, which is "tmobile" for your internet gprs connection.
Easy solution for a simple problem
Not sure what you are talking about. I don't see any option for a GPRS password within "Registry Wizard". Can you clarify or provide a screen cap?
tonblom said:
If you use "registry Wizard" you need to reenter your password, which is "tmobile" for your internet gprs connection.
Click to expand...
Click to collapse
GPRS Fix
Hey, I was experiencing the same problem with my orwells rom. I tried something but it's only been tested for one day...so far i have not experienced a drop out in my gprs connection like before (same as urs). create a new gprs connection with the exact same information as your previous one, just name it differently. go to settings-connections-add a new modem connection-put the same info as your current gprs settings - in "enter name for connection" put a different name.then under advanced- select networks select that "connection" as "program that automatically connect to the internet" then reset ur fone and see how it goes...just make sure u name ur connection differently compared to the old one - like creating a whole new different connection, only with the same gprs info
joecruz said:
Hey, I was experiencing the same problem with my orwells rom. I tried something but it's only been tested for one day...so far i have not experienced a drop out in my gprs connection like before (same as urs). create a new gprs connection with the exact same information as your previous one, just name it differently. go to settings-connections-add a new modem connection-put the same info as your current gprs settings - in "enter name for connection" put a different name.then under advanced- select networks select that "connection" as "program that automatically connect to the internet" then reset ur fone and see how it goes...just make sure u name ur connection differently compared to the old one - like creating a whole new different connection, only with the same gprs info
Click to expand...
Click to collapse
So let me get it straight - you also had the "two arrows and x" icon instead of the big G/E for the GPRS connection, then you tried a brand new connection and it worked fine?
My 8125 has been SIM/CID unlocked and I've loaded numerous WM6 ROMs and currently have CROSSBOW RELOADED running. Never a problem (well maybe a few !!) flashing Faria's Roms or others. Thanks for all the GREAT ROM work!! I also have a ROM Kitchen ROM version I loaded too!!
The ONE issue I have is that the GPRS/EDGE data connection refuses to connect. I live in area with EDGE but I fail to see the E or G icon pop up EVER. When the modem tries to dial the G icon appears briefly but I get the "no connection...." message.
WiFi and Bluetooth work like a champ on all ROMs loaded.
I thought that this behavior might be caused by Radio ROM and I've loaded the following with same results: 2.40.11, 2.47.11, and currently have 2.19.11 running. I also went back to Cingular 2.25.11 without success.
At one point I flashed back to the button 1.05 in hopes of cleaning stuff out! I then upgraded to stock Cingular 2.25 and same problem. No data connect. I then when ahead and flashed up to WM6 (Crossbow_reloaded).
Yes, I have a $20/mo Cingular data plan and I'm using the standard WAP settings for Cingular.
What am I missing???
Appreciate your help!!
Cingular 8125
IPL 2.26
SPL 2.26
GSM 2.19.11
OS 2.18.0.0
Hmmm. Sorry to ask such a question, but does it do it when you're unplugged from the USB cable?
Under Start - Settings - Connections - Connections - Advanced - Select Networks, did you try both My ISP and MEdia Net?
Try these cabs if you haven't already:
Thanks for your suggestions. Yes, I'm disconnected from USB while testing data connection.
I ran both of the cabs you included in response, but no help.
Any other thoughts?
Thanks,
I have wondered if there is a chance that some flag is set in the SIM that is preventing my connection. Anyone have experience here?
THX,
I've never had an issue with GPRS/EDGE after running either of the cabs above. I'm curious if you were to go back to the stock Cingular rom if it would all start working, or if there is some other issue going on here.
Also, for Cingular, if you are running WM6, don't even attempt to use any radio other than T-Mo 2.19 UK. Newer ones just seem to cause problems on the Cingular network with WM6.
I believe I have flashed back to stock Cingular 2.25 with this: (RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1).
I get same symptoms. I tried both "MY ISP" and "MEDIA Net" network settings with same results. I ran the cabs sent in this thread a couple of days ago too.
Specifically, I start IE and enter a web address and tap the green arrow to open the page. The little G appears w/moving arrows in the top bar and the info box says "Connecting to: Cingular GPRS". It stops and tries again and eventually the info box says: "Cannot connect: Dialed wap.cingular. There is no modem at this number".
Anything else to try?
Appreciate your help!
Cingular 8125
IPL 2.25
SPL 2.25
GSM 02.25.11
OS 2.25.11.1
I found a related thread at the Cingular forums:
http://forums.cingular.com/cng/board/message?board.id=cingular&thread.id=40993
According to prubin (poster in the above thread), Cingular discovers you are on the wrong plan for your PDA and automatically disables your access. I don't know how true that is, but it may be time for a call to Cingular to verify your connection and plan.
kegobeer said:
I found a related thread at the Cingular forums:
http://forums.cingular.com/cng/board/message?board.id=cingular&thread.id=40993
According to prubin (poster in the above thread), Cingular discovers you are on the wrong plan for your PDA and automatically disables your access. I don't know how true that is, but it may be time for a call to Cingular to verify your connection and plan.
Click to expand...
Click to collapse
Not true at all.
The only reason they disable the accounts has nothing to do with the device, but the amount of data usage.
Those yahoos were probably using > 500mb of data a month, or something insane that threw the flag.
Cingular doesn't care what type of device you have. It's just a marketing gimmick for them.
Yeah if you can't connect on the stock Cingular rom (the extended rom configuration will set all the GPRS and MMS stuff up for you so its ready to go) then you need to call Cingular, as its either them blocking you (not sure how they would do that really) or your phone has an issue. Be prepared, it seems Cingular will do some basic troubleshooting and then they'll offer to ship you a new phone. They don't take much time to really look into why a problem happens if its not very basic. I had a question about MMS messages and after a couple of minutes they were ready to ship me a replacement phone. I just laughed at how dumb that was. I let them note it in my account so I can get a future replacement very easily, but declined at the time.
A guy I work with has had Cingular replace (warranty exchange) his 8125 3 or 4 times now (he gets a scratch on it, so he calls and tells them some feature doesn't work)... Sheesh.
mfrazzz said:
A guy I work with has had Cingular replace (warranty exchange) his 8125 3 or 4 times now (he gets a scratch on it, so he calls and tells them some feature doesn't work)... Sheesh.
Click to expand...
Click to collapse
And people wonder why it costs so much for a phone - I'm paying for those replacements!!!
kegobeer said:
And people wonder why it costs so much for a phone - I'm paying for those replacements!!!
Click to expand...
Click to collapse
Yep, I totally agree. But the cell companies don't seem to discourage it either.
hi all
im new here many thanks for that amazing group here.
i have yesterday upgraded my rom of my at&t tilt (kaiser tytn ii) to the new version, well all looks ok BUT...
since then i cant get internet connection and mms messages.
i have checked it the whole day today with my network company (im in israel) and we have reconfigured the modem connections but nothing its dead.
before i have done the upgrade all was just ok since yesterday its no connection.
i have checked arround and i found that there are many users that have the same problame all around the world.
since any mms message goes thru internet (etc. gprs,edge,hsdpa) i assume that the problame is with the internet connection and that blocks the mms messages.
my cell company told me that as she sees all is ok and i remember my settings too.
also even when i connect my tilt with usb to my computer i cant go on the web bacause it says "no connection".
i assume that they have planted in the registery any value that blocks any internet connection (as gprs etc.) if its not thru the own supllier, i can understand also why but the fact is that i get hspda connection and i see the icon of "connected" but somthing blocks it !!!!!
is there a way how we can digg in and remove that block that dosent allow the internert?????
is there a way to bypass it ????
or maybe i should go back to my old ROM is that possible????
again i remind u that:
1) all worked excellent till yesterday
2) the HSDPA establishes a connection but the explorer is dead.
3) i cant even connect thru my pc with usb while my pc is fully connected via dsl to the internet.
4) all setting are same and at once its "no connection"?
5) i see that meny users have that problame
if there is any way let me know
also how bad and ugly will it be if i go back to my old ROM and how do i do it.
many thanks
tachat.....
run again the remove hidden proxy cab.
what do u mean "hidden proxy"
i never had any hidden proxy before why should i have them now??
how do i find them?
how do i remove them??
thanks
tuches
tuches said:
i never had any hidden proxy before why should i have them now??
[/b]how do i find them?[/b]
how do i remove them??
thanks
tuches
Click to expand...
Click to collapse
by searching removeHiddenProxy4CWS_1219.cab
Where did you download the rom from???
I know the one at HTC America is intended & configured for AT&T customer in North America. If a ROM was not released on your local AT&T or HTC site, that may contribute to your issues.
You may want to DL the network configuration wizard & give it a go at reconfiguring your device.
some good news
hi all
many thanks for visniak you were right.
it was some hidden silly proxy that i needed to kick out.
now the internet works great BUT i cant send MMs messages.
the configuratins are all ok (i checked it today with my network company)
they say that thats a ROM problame (means that this might be a problame because i upgraded it to ROM 1.62)
is that right???
is there a solution???
many thanks
it's like BEZEQ and BEZEQINT
each blaming the other.............
I don't use MMS.
But most likely your settings are incorrect.
Does the new AT&T ROM solve the Low Volume when using Bluetooth?
That is the only iserious issue I have with the Tilt.
I have been a Symbian user forever and the AT&T Tilt(Unlocked and using it on another service provider in India) is my first exposure to Windows mobile. I upgraded to the new AT&T Rom(1.62.502.0) and the low bluetooth volume issue is sorted out...I'm using the SE 970 stereo BT headset, which is working fine.(ADVANCE that should solve ur query)
My only issue now is that i am unable to use the Internet Explorer thru GPRS. Strangely i could configure and download my E mails thru Outlook. Also, when I Sync the Tilt with my PC, IE works fine using the net connection from the PC. Any insight/clues why I'm facing this issue?
I am a long time reader newer poster. I am coming from a Treo 750. Is there anything I should do to this before I start adding my apps and transfering contacts? Is there a better backup of my Treo other than the Windows Vista Sync? I am mainly concerned with contacts and software. Also I am on Att I heard about the only thing I need to do is swap Sim card out, also should I adjust the wap settings for this to work. [email protected] password CINGULAR1. Also does it matter when syning new device the device name be the same? What is the best ROM I should have?
ATT
I also use att and all i have to do is set up the network to use media net and tell it under advanced to not use the proxy. It should work fine for you then. I am using Bepe rom 6.3 premium. The connection wizzard sets up right for ATT in the us except fothe proxy. you do npot have to enterthe wap settings they are there already.
Coming from my 750, I didn't have to do a thing - just stick in sim card and I was good to go. I am on the PDAConnect plan so no issues with proxies and such.
As for backup, use Sprite. It comes with the Cruise on the CD.
Thanks I will do that. I should have it in my hands tomorrow morning.
mpf54 said:
I also use att and all i have to do is set up the network to use media net and tell it under advanced to not use the proxy. It should work fine for you then. I am using Bepe rom 6.3 premium. The connection wizzard sets up right for ATT in the us except fothe proxy. you do npot have to enterthe wap settings they are there already.
Click to expand...
Click to collapse
I got my phone installed bepe rom premium, I thought I got all of the att settings correct I am able to receive sms and email but for some reason It only has edge when before the rom i was getting hsdpa and 3g speeds. can you please take me through a small tutorial of what excat settings I need in the connections panel. I have only 1 listed MEdiaNet I then went to the advanced network and it says: turn on HSDPA it is checked, GPRS PAP authentication is checked, CSD Line Type data rate 9600 bps(v.32) connection element Transparent, SMS Service SMS over GSM. What else do I need to do? Please help
Also under comm manager it shows no data connection available?????
I figured it out. I removed all settings and went through the connection wizard. Also I forgot to change the band type to auto, that is why I would only get edge speeds. I wasnt sure about the proxy settings, I was supposed to checkit not uncheck it. and found the server settings and port numbers. Thak for everything. This phone is so much better than the treo 750. Well worth the money. No more square screen for me.
Out of curiosity what do we need to set the proxy to? Is this for using tethering or something else? I am on ATT as well and the auto network configure app thing seems to have set it all up correctly. Is there anything additional to be done?
Hello everyone,
Got my Touch Pro yesterday, first impressions were good but I just realised that there is no way to get my exchange to sync through 3G (or even GPRS).
I'm with 1and1, my parameters are fine (they work on my Vario III with the same SIM card). I'm with T-mobile (I know the 3G reception is not good on the TP, I had to switch to 2G to avoid getting cut off during a call, but I get 4 bars from my desk in a loft, so that shouldn't be a problem!).
I tried the default t-mobile parameters setup by the touch, and I tried to configure the connection manually with the parameters that work well with my Vario III:
APN: general.t-mobile.uk
User name: user or nothing (instead of T-mobile)
Password: pass or nothing
Still a no go. I get the same error message:
Activesync cannot reach the server. Check that the server address and proxy server settings are correct.
Support code: 0x80072F78
I've called 1and1 and they say they support WinMo6.1.
Anyone with T-mobile able to sync an exchange account on 3G/GPRS?
Would you mind sharing parameters?
I could live with the Touch Pro with 2G until they release a better rom/radio, but I can't live without push email/exchange!
By the way, there is no problem with the server itself or the exchange parameters, it synchronizes fine on wifi, so it looks like it's a touch pro (works on Vario III), winmo6.1 (works on Winmo 6.0) or t-mobile (works on wifi) issue!
Thanks for your help!
PS: before you ask, I did a hard reset to make sure there is no problem with third party software, this is after a hard reset...
Manni01 said:
Hello everyone,
Got my Touch Pro yesterday, first impressions were good but I just realised that there is no way to get my exchange to sync through 3G (or even GPRS).
I'm with 1and1, my parameters are fine (they work on my Vario III with the same SIM card). I'm with T-mobile (I know the 3G reception is not good on the TP, I had to switch to 2G to avoid getting cut off during a call, but I get 4 bars from my desk in a loft, so that shouldn't be a problem!).
I tried the default t-mobile parameters setup by the touch, and I tried to configure the connection manually with the parameters that work well with my Vario III:
APN: general.t-mobile.uk
User name: user or nothing (instead of T-mobile)
Password: pass or nothing
Still a no go. I get the same error message:
Activesync cannot reach the server. Check that the server address and proxy server settings are correct.
Support code: 0x80072F78
I've called 1and1 and they say they support WinMo6.1.
Anyone with T-mobile able to sync an exchange account on 3G/GPRS?
Would you mind sharing parameters?
I could live with the Touch Pro with 2G until they release a better rom/radio, but I can't live without push email/exchange!
By the way, there is no problem with the server itself or the exchange parameters, it synchronizes fine on wifi, so it looks like it's a touch pro (works on Vario III), winmo6.1 (works on Winmo 6.0) or t-mobile (works on wifi) issue!
Thanks for your help!
Click to expand...
Click to collapse
Use the settings the connection manager applies automatically....untick the proxy server and you should be good to go, i also am on tmobile UK, same settings and use an exchange server. The proxy has been messing which alot of stuff recently, im sure theyve changed something on it since this happened on my Hermes aswell.
Perhaps flash the newer radio onto your Raph....update to HardSPL first then flash Radio 1.02.25.31 to your device from the wiki pages. Read everything to the letter and ul be fine.
mrvanx said:
Use the settings the connection manager applies automatically....untick the proxy server and you should be good to go, i also am on tmobile UK, same settings and use an exchange server. The proxy has been messing which alot of stuff recently, im sure theyve changed something on it since this happened on my Hermes aswell.
Perhaps flash the newer radio onto your Raph....update to HardSPL first then flash Radio 1.02.25.31 to your device from the wiki pages. Read everything to the letter and ul be fine.
Click to expand...
Click to collapse
Thank you, that was quick and efficient! Unticking the proxy did the trick (even with the manual parameters).
Manni01 said:
Thank you, that was quick and efficient! Unticking the proxy did the trick (even with the manual parameters).
Click to expand...
Click to collapse
yer its a weird problem tbh. Have you used the HSPA connection for a laptop/pc yet? fast as hell.
mrvanx said:
yer its a weird problem tbh. Have you used the HSPA connection for a laptop/pc yet? fast as hell.
Click to expand...
Click to collapse
Not yet, trying to get the basics to work first. Used to do this with my Vario III (BT PAN) and was very happy with it. I'm hoping it will be faster with the TP.
Forgive me if I'm being think, but the radio you mentionned is listed as coming form Cingular in the wiki. Will it work with UK T-mob, and will it improve the 3G reception issue?
Manni01 said:
Not yet, trying to get the basics to work first. Used to do this with my Vario III (BT PAN) and was very happy with it. I'm hoping it will be faster with the TP.
Forgive me if I'm being think, but the radio you mentionned is listed as coming form Cingular in the wiki. Will it work with UK T-mob, and will it improve the 3G reception issue?
Click to expand...
Click to collapse
Ive had some improvment with the reception yes, calls dont seem to drop as much, it works fine with tmobile.
it is possible.
Hi, I got a pro, use it on the dutch tmob netwerk, both G and H work fine with the (free) mail2web exchange service.
t-mobile uses standard proxy to bring webpages faster .. unfortionatly it doesnt map all other ports so youtube and such wont work either.. it keeps trying to connect when one plays a video. since it is not neccesary to have a proxyserver it is best practice to turn it off.
mrvanx said:
yer its a weird problem tbh. Have you used the HSPA connection for a laptop/pc yet? fast as hell.
Click to expand...
Click to collapse
Hi MrVanx!
I've tried to setup my BT Pan as usual with my Vaio TZ11, and although the pairing and setup goes fine, when I try to connect I get a "connection is denied" error. Does the BT PAN work out of the box on the TP or do you need a tweak like on the Kaiser?
Sorry I'm afraid this was a "RTFM" case...
As the internet sharing option has disappeared from the comm manager, I assumed the connection was automatic...
Of course you need to launch internet sharing and select BT PAN...
It works great, I get 400-500kbps down and 300-400kbps down, 130-140ms ping. Far from my home broadband, but still good enough.
I tried with my Vario III, I get about the same results (with 3 bars on HSDPA on Kaiser, 4 on TP).
So two questions now:
1) Do you get better performance with T-Mobile UK on the Touch Pro (I'm in Salisbury)
2) Any way to bring Internet Sharing back to comm manager?
This worked for me
Man I wasted 30mins - had already read this post before I ordered and forgotten. XDA dev is the best!