I have a Dell Axim x50v. Recently, I installed a program called WeFi. It did some strange things to my wifi, but it still worked. Yesterday, I couldn't connect to hotspots, so I did a soft reset. It came up and said that it couldn't recognize the card in Socket 1. I removed WeFi, and did a soft reset. Then the wifi wouldn't turn on. I did a hard reset. Now, even after a hard reset, the CF slot doesn't work and the wifi will not turn on. Also, it will not restore my most recent backup. Can anyone help me?
Can anyone help?
Related
Hi Guys
Sorry if this is in the wrong area ... i think its correct?
I recently upgraded(?) to XP64 pro and ever since my Blueangel keeps connecting and disconnecting when plugged into its USB cradle.
I hear the "connect" beep and see it appear in Device Manager. I then hear the "Disconnect" beep after a random (usualy short) amount of time, maybe 2/3/4 seconds and its vanished from Device Manager. A couple of seconds later it will then reconnect again..... rinse, repeat
This was working fine before the XP 64 upgrade so I can only imagine its related to that and the hardware is all OK.
(if you need/want any more details from the phone then you will need to tell me how to get them )
Any ideas?
Thanks in advance!
ActiveSync works fine for me under xp64 so that's not the problem. I recall having the same problem with the BA and I think doing a hard reset on the phone and clearing out the partnership on the computer to force a new partnership did the trick. I don't recall going so far as to uninstall and reinstall ActiveSync.
Thanks for the suggestion.
I can try a reset on the phone of course, certainly won't hurt! Sadly though, I don't even have Active Sync installed yet so I can't really see how it will help.
Im just trying to see the phone as a USB storage device first :?
I always found my XDA2 would keep disconnecting & reconnecting if I tried to switch it off in the cradle. Now I just leave it on and hold down the power button to turn off the backlight.
I installed Dutty v4 last night and upgraded my radio to 12.32 I believe. Today I tried installing more software and activesync doesn't respond. I tried installing activesync on a different computer and still nothing. I have tried hard reset, turning the computer and the phone off several times, reinstall activesync, etc. I do believe it's a problem with the phone since I did install activesync on a new computer and didn't work.
I even tried doing a reset by pressing the cammera + power button and reset. That's where I am right now and I do have the 4 color screen.
The phone charges ok and when I connect the cable I can see the icon on the battery.
Any suggestions?
Thnx
May the fire wall is making trouble?
Please close the fire wall and try again?
No it's not that.
What I end up doing was going to my niece and get her connector from Tytn. If I plug the connector into my cable it works. But the cable by itself didn't. So I suspect my plug is going soon. Any suggestions who fixes this? I know it's under warranty and HTC should fix it.
I'm not sure where to put this so I'll put it here. I have a Fuze running the October 4 TAEL rom. Since I played with Exchange settings for Activesync, it won't sync. I first tried my Tilt which is recognized and syncs happily. I then tried to replace the serialusbfb.dll file but couldn't replace or remove the exisitng file. Some posts suggested to use Total Commander but it couldn't remove, replace or rename the file. SoI did a hard reset and that made no difference and then reflashed it from a formetted SD card, with the same 4-oct-09 TAEL rom. Same thing.
There no sign of abuse, or loose jacks, or so on, and I've tried two computers (a desktop and a laptop) and both are happy with the old Tilt and both are unhappy with the Fuze. It charges happily, etc.
Any suggestions? Can it be synched by BT if there is a hardware problem? How can I tell if there is a hardware problem?
This might fix ur problem:
1) Go to your "USB Settings"
- For me its Start->Settings->System->USB Settings but i have EnergyROM
2) Under "ActiveSync" uncheck the box that says "Enable faster data connections"
3) Plug in USB cable..
changing USB settings made no difference
any other suggestions? Anyone know how to replace the serialusbfn.dll when it seems to be in use? Can BT be used to sync?
can bluetooth be used to create pairing for the first time?
My Fuze won't sync and give USB device not recognized errors and I can't seem to replace the serialusbfn.dll because it is in use, and after flashing the phone to attempt to replace the dll, I have no pairings in activesync. The instructions I see for using BT seem to require first making the pairing on USB and then going to BT.
Any advice on getting the USB working or BT to create a pairing?
Bob does it simply have problems linking through usb? I blew on the connector and on where it hooks on the phone and it worked. Figure out a way to clean the slot on the phone because it may be junk and oxidation that may provide a bad connection.
it charges but is not recognized
contacts are nice and clean: the phone is only 4 months old and is in good condition.
Hello everyone.
Once upon a time i came to my TP and tried to activate the screen. nothing happened. Screen dead - only very faint backlight showed up. So i thought, maybe the ROM went bad somehow. So i tried soft reset. No change. I tried Hard-reset (which is not as easy when you dont see a thing). Now i thought, ok, just flash it again. BUT thats when the heavy thing came in. The USB cabel doesnt work. It does charge through the cable, but the PC doesnt recognize it at all. Anyone has an idea how i could get in connection with it? If i cannot bring up a USB connection will the guys at the repair factory be ale to connect somehow? I still have warranty (time-wise).
I will be gratefull for any idea on how to make the USB connection or how to flash without USB connection.
After some trying i found out that Windows somehow reserves USB slots for certain devices and after plugging the cable into different slot i managed to get a Sync and USB connection.
Then i faced the problem with returning "blinded" stock ROM and stock SPL. Thanks to the great guides here i managed to download a Stock ROM and flash it onto the Raphael. Then i faced the problem with putting in the Stock SPL, but it worked once i put the device into bootloader mode with Volume Down + reset.
So now i hope my device is as Stock as i bought it, and i will be sending it in for warranty repair or exchange. I hope its just some minor problem with display.
I just replaced my battery. Everything powers up nicely. I did a factory reset. When you get to wifi it says turning on but never does. Same with bluetooth. I have tested the router with other devices. Any ideas? Could I have disrupted something with the battery replacement? Everything else on the tablet seems to be working fine. Thanks