I installed Dutty v4 last night and upgraded my radio to 12.32 I believe. Today I tried installing more software and activesync doesn't respond. I tried installing activesync on a different computer and still nothing. I have tried hard reset, turning the computer and the phone off several times, reinstall activesync, etc. I do believe it's a problem with the phone since I did install activesync on a new computer and didn't work.
I even tried doing a reset by pressing the cammera + power button and reset. That's where I am right now and I do have the 4 color screen.
The phone charges ok and when I connect the cable I can see the icon on the battery.
Any suggestions?
Thnx
May the fire wall is making trouble?
Please close the fire wall and try again?
No it's not that.
What I end up doing was going to my niece and get her connector from Tytn. If I plug the connector into my cable it works. But the cable by itself didn't. So I suspect my plug is going soon. Any suggestions who fixes this? I know it's under warranty and HTC should fix it.
Related
Hi Guys
Sorry if this is in the wrong area ... i think its correct?
I recently upgraded(?) to XP64 pro and ever since my Blueangel keeps connecting and disconnecting when plugged into its USB cradle.
I hear the "connect" beep and see it appear in Device Manager. I then hear the "Disconnect" beep after a random (usualy short) amount of time, maybe 2/3/4 seconds and its vanished from Device Manager. A couple of seconds later it will then reconnect again..... rinse, repeat
This was working fine before the XP 64 upgrade so I can only imagine its related to that and the hardware is all OK.
(if you need/want any more details from the phone then you will need to tell me how to get them )
Any ideas?
Thanks in advance!
ActiveSync works fine for me under xp64 so that's not the problem. I recall having the same problem with the BA and I think doing a hard reset on the phone and clearing out the partnership on the computer to force a new partnership did the trick. I don't recall going so far as to uninstall and reinstall ActiveSync.
Thanks for the suggestion.
I can try a reset on the phone of course, certainly won't hurt! Sadly though, I don't even have Active Sync installed yet so I can't really see how it will help.
Im just trying to see the phone as a USB storage device first :?
I always found my XDA2 would keep disconnecting & reconnecting if I tried to switch it off in the cradle. Now I just leave it on and hold down the power button to turn off the backlight.
Hi friends,
I am having a very weird situation here and I need your help.
My phone was working perfectly after the last time I have upgraded the rom which happened a couple days ago. Then yesterday I have discovered that my phone is turning on and off on its own. It turns on, then after a few seconds it turns off and then turns on again.
When I hard reset, it gets stuck at the smart mobility screen.
I can enter the bootloader screen by pressing the camera key and inserting the usb cable. The tri-color screen shows usb at the bottom left corner. When I run mtty, it says the usb port cannot open.
I know that it has sufficient power in the batteries (tried with two different batteries I have). However, when I plug it to a wall charger the charging light doesn't turn on.
So basically I have a tornado which cannot boot, mtty seems not able to recognize it. Is there any way to push an SPL, radio rom or OS rom to the phone? Is it possible to flash a tornado with an SDcard?
I really need some help here as I am out of ideas. thanks in advance.
Did you try hard resetting it? (While off holding both softkeys and then pushing the power button)? If so, flashing from card is possible...you just have to install the original ROM though. Google this: Tor_TMOUS_10140_191916_10900_SHIP.exe
Extract it then copy the nbf file to your memory card.
You may have to rename it and change the headers though...that I don't know
Here might help you by the way
http://forum.xda-developers.com/showthread.php?t=409286&highlight=original+rom
Good luck!
Your problem is more likely seems the power key is stuck.
thacen said:
Your problem is more likely seems the power key is stuck.
Click to expand...
Click to collapse
I am almost sure that this is not the case because I can use the power button for shutting the device off and restarting it, etc.
My only hope is to be able to flash from the SDCard now, as unforsakenrule mentioned. The problem is I need a step by step guide to do that.
burkay said:
When I run mtty, it says the usb port cannot open.
Click to expand...
Click to collapse
Did you disable the USB connection from ActiveSync properties?
I had had a similar problem which was solved after reinstalling the ROM.
NiTroGenious said:
Did you disable the USB connection from ActiveSync properties?
I had had a similar problem which was solved after reinstalling the ROM.
Click to expand...
Click to collapse
sure I did. The problem is no matter what the device is not recognized by the pc. mtty, activesync, tera term, etc. all fail whether usb connection is enabled or not. Weirdly, in the bootloader menu it says USB in the bottom left.
It really sucks, because I have the bootloader there but I cannot load anything to the device to recover it.
While it is in bootloader screen activesync couldn't connect or it could not detect your device. If you want to connect by teratermpro you need to disable USB connection from active sync otherwise teraterm could not connect your device.
I think your PC will not show you any connection symbol while connecting in bootloader but you may hear some sound while connecting or disconnecting.
One thing you can try is just try reflashing a stable rom by just running RomUpdateUtility. If it cannot find your device then check on your PC's Hardware device manager, if there is any unworking driver. if such driver is there just uninstall it and try connecting again.
May be it can solve your problem.
thanks for the advise, but I pretty much tried everything... everything except an SDCard flash. And that, I don't know how to do. I have been an HTC user for the last few years. This iMate SP5, which I owned a year ago, belongs to my sister now. I now have a Hermes, waiting for the prices to come down before ordering my touch pro. I flashed tens of roms in both devices, connected using mtty, teraterm etc. many times. This is the first time I am totally left clueless and I believe this is what we call a brick, indeed
Usb is not working on my polaris. When i connect it to my computer nothing happen. The computer wont eve recognize that i connected something. I have tried to hard reset it, but it didn't work. I have flashed it with c_shekar v3 rom. I also have radio rom v. 1.58.25.14. The usb port has worked great for some time now, but suddenly it just didn't work.
usb problem
I had the same problem and the solution was really bizare. I let the phone into the usb, charging and after a while i heard that usb pluging in sound and imediatly after that the usb pull out sound, then after some time it happend again, and again. The fourth time i think the connection was stable and activesync worked. I did nothing, weired , i know but this is when windows meets windows through another company. Oh, and see if the usb on the phone is clean.
I did try to clean the usb connection on the phone, but it didn't work. I have also tried 4 diffrent usb cables. I am trying to flash another rom from the sd card, but that isn't working either :S The phone have been connected to the computer for several days now, but nothing happens. Maybe the moisture in my skipants killed it? (I spend at least 4 days a week on my snowboard) Maybe I'll just use it for skiing and dh, and buy a diamond for normal use.
I'm a flooring salesmen and one of my potential clients/builders has a Touch Pro that suddenly won't sink to his pc.
He has a pc running XP with Activesync 4.5
When he plugs his phone in nothing happens... When he clicks on Activesync and clicks "Connect" it doesn't find his phone.
What is going on?
Please help. Thx
-BjM
try replacing the usb cable, try turning off the advanced options in usb to pc or whatever it is, and then try re-installing activesync.
I had the same problem the other day (on my Juno), and then I noticed that when I plugged it in the charging light never came on.
Traced the problem back to a bad/worn USB cable. Replaced it and now it works like a champ.
Might be a long shot but I had a similar problem once with a digital camera and it turned out to be a blown usb port. Have you tried plugging it in to another one ?
Hello everyone.
Once upon a time i came to my TP and tried to activate the screen. nothing happened. Screen dead - only very faint backlight showed up. So i thought, maybe the ROM went bad somehow. So i tried soft reset. No change. I tried Hard-reset (which is not as easy when you dont see a thing). Now i thought, ok, just flash it again. BUT thats when the heavy thing came in. The USB cabel doesnt work. It does charge through the cable, but the PC doesnt recognize it at all. Anyone has an idea how i could get in connection with it? If i cannot bring up a USB connection will the guys at the repair factory be ale to connect somehow? I still have warranty (time-wise).
I will be gratefull for any idea on how to make the USB connection or how to flash without USB connection.
After some trying i found out that Windows somehow reserves USB slots for certain devices and after plugging the cable into different slot i managed to get a Sync and USB connection.
Then i faced the problem with returning "blinded" stock ROM and stock SPL. Thanks to the great guides here i managed to download a Stock ROM and flash it onto the Raphael. Then i faced the problem with putting in the Stock SPL, but it worked once i put the device into bootloader mode with Volume Down + reset.
So now i hope my device is as Stock as i bought it, and i will be sending it in for warranty repair or exchange. I hope its just some minor problem with display.