Database Info

Strange... behaviour ?

Greetings,
Im getting a really odd problem with my kaiser. I turned it off yesterday nad connected the charger... the cellphone turned on, but showed me that screen that appears when we are flashing it (4 horizontal bars, red, green, blue, white)... (!!!)
Inside the red bar, I can read:
KAIS130 MFG
SPL-1.0.OlipPof
CPLD-8
Inside the white bar:
Serial
Funny thing is, the phone won´t turn off, I have to remove the battery. After leaving it without the battery for 60 to 120 seconds, I placed the battery again and turned it on... and it booted normally.
Now, most of the time it will boot into the color bars. Any ideas about what is going on ?? Please help... can´t use the phone!

Same thing.....sort of.
I had the same behavior on my Tilt for a while. I did find that if I plugged a usb cable into the phone, or put pressure on the USB port while booting, it would boot normally. It did this for about a week and then started booting normally all the time. The only thing I can think of that I changed that week was upgrading the radio. I upgraded to the 1.64.08.21 radio.
The screen you are seeing is the boot loader screen. When it comes on, does it flash a message real quickly that says something like "image file not found"? That is what mine was doing.
You may also want to check out this thread. http://forum.xda-developers.com/showthread.php?t=344402

StealthNet said:
Greetings,
Im getting a really odd problem with my kaiser. I turned it off yesterday nad connected the charger... the cellphone turned on, but showed me that screen that appears when we are flashing it (4 horizontal bars, red, green, blue, white)... (!!!)
Inside the red bar, I can read:
KAIS130 MFG
SPL-1.0.OlipPof
CPLD-8
Inside the white bar:
Serial
Funny thing is, the phone won´t turn off, I have to remove the battery. After leaving it without the battery for 60 to 120 seconds, I placed the battery again and turned it on... and it booted normally.
Now, most of the time it will boot into the color bars. Any ideas about what is going on ?? Please help... can´t use the phone!
Click to expand...
Click to collapse
You probably have a messed up bootloader, you can fix it. I had this last week. Check the stickys above. The key program to fix it is mtty, make sure read a lot about it.
check the "Flashing your device section"
http://wiki.xda-developers.com/index.php?pagename=KaiserFAQ
that should help

Well... I tried using mtty, but it won´t work. I suppose it will work only on Windows XP machines right ?
I tried in two machines (Vista 64 and Vista 32) wihtout luck.
I tried reverting the ROM back to OEM, including the bootloader. I successfully flashed this one, but Im still getting the 3 color bootloader.
Thing is, it still reads the same
Inside the red bar, I can read:
KAIS130 MFG
SPL-1.0.OlipPof
CPLD-8
Inside the white bar:
Serial
After reading the forums, I found out that I´ll get out of this problem by using MTTY, and that I should simply issue a " boot" command.
Is that right ?
If so, my only problem now is to get a Windows XP machine... because I can´t get MTTY to show an USB option to connect to. Already tried configuring activesync, killing the processes, without success.
Ideas ?

StealthNet said:
Well... I tried using mtty, but it won´t work. I suppose it will work only on Windows XP machines right ?
I tried in two machines (Vista 64 and Vista 32) wihtout luck.
I tried reverting the ROM back to OEM, including the bootloader. I successfully flashed this one, but Im still getting the 3 color bootloader.
Thing is, it still reads the same
Inside the red bar, I can read:
KAIS130 MFG
SPL-1.0.OlipPof
CPLD-8
Inside the white bar:
Serial
After reading the forums, I found out that I´ll get out of this problem by using MTTY, and that I should simply issue a " boot" command.
Is that right ?
If so, my only problem now is to get a Windows XP machine... because I can´t get MTTY to show an USB option to connect to. Already tried configuring activesync, killing the processes, without success.
Ideas ?
Click to expand...
Click to collapse
Yea, you are right, only works on XP. I couldn't get it to work on my Vista Box, had to use my gf XP laptop. goodluck, you should be fine once you find one.

Ok,,, not starting to get worried.
Connected to a MTTY, issued the boot command.
Received this as an outpout:
Cmd>boot
Fill RSVD information for block 288 to 309
Storage start sector=0xA680, total sector=0x10C40
Storage start block=687, total block=1073
Total Bad Block in CE: 0
Erase physical block from 975 to 2032
formatstorage Bad block found: 1658
formatstorage Bad block found: 1659
formatstorage Bad block found: 1918
si backup: Erase physical block from 2032 to 2048
No card inserted
OEMIPLInit clear 10MB ext RAM
OEMGetUpdateMode
OEMTranslateBaseAddress 23 80000000 80000000
IPLMSG:0x8:INFO: Loading image ...
IPLMSG:0x9:INFO: Jumping to image...
OEMLaunchImage crc of Mini-Kernel:0x7EB8DBEB
OEMLaunchImage 80000000
Jump to Physical Address 10300000
Now it boots, the bootloader screen appears rapidly, and it fades to white...

... removed the USB cable, the device turned off. Connected it again and the bootloader appeared again.
Any ideas ?

Since I successfully flashed the way in to the default OEM ROM, and I think my problem is related to the bootloader, I tried flashing HardSPL 3.56.
It flashed, rebooted, and booted nicely into WM 6.1 (default version out from this ROM).
The first automatic customization happened as it was supposed to... and it rebooted... into bootloader argh!!
Removed the battery, waited 120 seconds, boot the phone. Working so far. Now, it has a 50%/50% of getting a bootloader or booting correctly.
Any other ideas ?? Man, tell me about a strange thing...

Since there are more with the same problem, but they are discussing it in another thread from L26, I think it's ok to auto moderate this one

Just to point out that the problem is solved (I think) - read here -> http://forum.xda-developers.com/showthread.php?p=2415437#post2415437

Tilt powers off at Windows screen

I have an at&t Tilt. I am having a problem with the device automatically powering off during the Windows screen while loading.
To get to where I am at:
1. I followed the instruction to install the HardSPL from HERE. On my bootloader screen, I see:
KAIS1*0 MFG
SPL-1.0.OliPof
CPLD-8
2. Then I did the Sim Unlocker procedures found HERE. After completing step 5, the device rebooted, the AT&T icon displayed, then the screen goes blank and stayed that way.
3. I found the fix for the black screen problem HERE. It was a radio problem, and I needed to update the radio to a compatable radio.
4. My phone worked fine for a day. The next day, my phone just died and when I rebooted, it said critically low battery. After I tried to charge it overnight (with AC adapter charger), it was still critical low battery. Then I tried USB charger for the day, still critical low battery. I figured it was a SPL-Radio conflict.
5. Then it stops getting into Windows altogether. It will power off at the Windows loading screen. I let it charge all day. I suppose that the battery is not dead because it is able to stay on the Tri-Color screen without being plugged in, and it always turns off at the same exact point while loading Windows.
6. I still can get to the tricolor screen. I can see USB when plugged and serial when unplugged.
7. I can flash ROMS, and I will even see the different Windows loading screens (Dutty's screens are different than the AT&T green Windows screens.) I have tried original AT&T and cooked WM6.0 Roms/Radios, WM6.1 Roms/Radios. It still keeps rebooting at the Windows loading screen. I tried the original and cooked roms from HERE.
8. I tried accessing the phone via MTTY and use the "boot" command. I still don't fully understand the boot command and what exactly it does, but from my understanding, it resets the boot loader chip.
9. I would like to update the SPL -- instructions HERE. But since I can't fully boot the phone, I can't actually run the Soft SPL (JumpSPL).
Please... any advice will be greatly appreciated.
Similar Problems/Threads:
1. http://http://forum.xda-developers.com/showthread.php?t=406163
2. http://forum.xda-developers.com/showthread.php?t=409272

Try to charge through the usb port on your computer... I have had a similar issue, but that was full stock and still have the issue. HTC chargers wont work for me but select moto ones will. Does the orange light come on when you connect by USB to your computer?

I have tried charging through the USB port on my computer (as well as AC Adapter). It does show the amber light on top (for both methods), but no matter how long I charge it, it will never get to the fully charged green light.
I haven't tried a different (non HTC) charger, but I will try that next.

Are you sure the SIM card door is locked? My phone reboots on its own during start-up if the SIM door is nor properly locked into place...

I just tested the sim card cover. It will reboot at the same point even if the cover is on of off. However, I do believe the cover is sitting correctly, because if I'm at the white AT&T boot screen and remove the cover, the phone will power off.

have you tried hard-resetting your tilt before and after flashing? I had the same problem before. Try to do a hard reset, flash a stock ROM for your tilt, then hard reset afterwards. If same thing happens again, we'll try another method

Put phone in tricolor mode and connect with MTTY.
Type "info 8" and post output here. I suspect problem is caused by bad sectors in the OS area.

There a few different forums on this same subject, and I had the exact same experience on a brand new kaiser last week and thought it was dead. Yea, your gonna have to do a hard reset holding down the power and camera buttons then clicking the soft reset button to get to tri color bootloader mode before it dies, then plug into pc and reflash the official htc rom. It seems like a one time phenomenom as my Kaiser is running just fine now as I was three seconds away from flushing it down the toilet

jockyw2001 said:
Put phone in tricolor mode and connect with MTTY.
Type "info 8" and post output here. I suspect problem is caused by bad sectors in the OS area.
Click to expand...
Click to collapse
Here is the output after using MTTY:
Cmd>info 8
--- 2K bytes sector version ---
DEVICE NAME=samsung_k9k2g08
DEVICE ID=0xAA
DEVICE MAKER ID=0xEC
PAGE SIZE=0x800
TOTAL PAGE SIZE=0x840
BLOCK COUNT=0x800
BLOCK PAGE=0x40
Checking block information
BLOCK 0 (0x0) is reversed block
BLOCK 1 (0x1) is reversed block
BLOCK 2 (0x2) is reversed block
BLOCK 8 (0x8) is reversed block
BLOCK 9 (0x9) is reversed block
BLOCK 10 (0xA) is reversed block
BLOCK 11 (0xB) is reversed block
Partition[0], type=0x20, start=0x2, total=0x63E
Partition[1], type=0x23, start=0x640, total=0x700
Partition[2], type=0x25, start=0xD40, total=0x94C0
Partition[3], type=0x4, start=0xA200, total=0x110C0
CE Total Length(with sector info) = 0x5151000
CE CheckSum Length(without sector info) = 0x5100000
Cmd>

kaalgoosy said:
There a few different forums on this same subject, and I had the exact same experience on a brand new kaiser last week and thought it was dead. Yea, your gonna have to do a hard reset holding down the power and camera buttons then clicking the soft reset button to get to tri color bootloader mode before it dies, then plug into pc and reflash the official htc rom. It seems like a one time phenomenom as my Kaiser is running just fine now as I was three seconds away from flushing it down the toilet
Click to expand...
Click to collapse
I have tried a hard reset before and after flashing the ROM. The method I used was pressing down the two buttons on the front of the phone then soft reset (one above internet button and one above mail button)... then I am prompted with a white screen saying, "This operation will delete all your personal data, and reset all settings to manufacturers default. Press Send to restore manufacturer default, or press other keys to cancel." Please let me know if this method is wrong.
I actually haven't tried the official HTC rom because my phone is originally an AT&T phone. I have tried the official AT&T rom, including the WM6.0 and WM6.1, but I will try the HTC rom now. It won't hurt to try!
UPDATE: After hard reset --> Load official HTC Rom 1.56.405.5 (radio 1.27.12.11) --> hard reset again. Still does the same thing... still rebooting during Windows load. The only difference, no more AT&T screen during bootup... now it's a "smart mobility" message.

jommo said:
I have tried a hard reset before and after flashing the ROM. The method I used was pressing down the two buttons on the front of the phone then soft reset (one above internet button and one above mail button)... then I am prompted with a white screen saying, "This operation will delete all your personal data, and reset all settings to manufacturers default. Press Send to restore manufacturer default, or press other keys to cancel." Please let me know if this method is wrong.
I actually haven't tried the official HTC rom because my phone is originally an AT&T phone. I have tried the official AT&T rom, including the WM6.0 and WM6.1, but I will try the HTC rom now. It won't hurt to try!
UPDATE: After hard reset --> Load official HTC Rom 1.56.405.5 (radio 1.27.12.11) --> hard reset again. Still does the same thing... still rebooting during Windows load. The only difference, no more AT&T screen during bootup... now it's a "smart mobility" message.
Click to expand...
Click to collapse
my OS is writing in bad blocks before that's why it's rebooting over and over again. What I did was use jocky's frankenkaiser (http://forum.xda-developers.com/showthread.php?t=393337). This WIPES OUT ALL DATA IN YOUR KAISER and you need to restore it back again. FOR THIS YOU NEED TO FLASH THE RADIO FROM HELL (get it from here http://forum.xda-developers.com/showthread.php?t=393182) AND AN OLD SPL which you have right now. Read the directions carefully-- it's not that hard but also not for the faint-hearted. Goodluck!

pfcsabre said:
my OS is writing in bad blocks before that's why it's rebooting over and over again. What I did was use jocky's frankenkaiser (http://forum.xda-developers.com/showthread.php?t=393337). This WIPES OUT ALL DATA IN YOUR KAISER and you need to restore it back again. FOR THIS YOU NEED TO FLASH THE RADIO FROM HELL (get it from here http://forum.xda-developers.com/showthread.php?t=393182) AND AN OLD SPL which you have right now. Read the directions carefully-- it's not that hard but also not for the faint-hearted. Goodluck!
Click to expand...
Click to collapse
I know you specifically said to get the radio from hell, but after reading jockey's guide, I got the other radio that GSLEON3 successfully got working with FrankenKaiser. Now I'm stuck because it didn't work out for me. I used radio 1.64.08.21 rather than the actual radio from hell 1.65.17.10. Hopefully GSLEON3 and Jockey will be able to help me with this one.

Can't recall I published FrankenKaiser for radio 1.64.08.21
Here is is:
http://rapidshare.com/files/130939717/FrankenKaiser-V1.9408.zip.html
(follow the readme inside the zip file)

jommo said:
I know you specifically said to get the radio from hell, but after reading jockey's guide, I got the other radio that GSLEON3 successfully got working with FrankenKaiser. Now I'm stuck because it didn't work out for me. I used radio 1.64.08.21 rather than the actual radio from hell 1.65.17.10. Hopefully GSLEON3 and Jockey will be able to help me with this one.
Click to expand...
Click to collapse
ooops... replied to your pm it seems jocky sent you the correct one already. Good luck mate

Losing hope....
Well, I successfully completed the FrankenKaiser process, updated my SPL to reflect:
Security Unlocked
KAIS1*0 MFG
SPL-1.1.JockyW
CPLD-8
I am still getting the power off while Windows loading.
I even tried to load back the original radio from hell (1.65.17.10) and completely ran through the FrankenKaiser process hoping somehow it would fix the problem... but unfortunately, it did not work.
1. Maybe I'll try a few more rom/radio combinations
2. At least I can re-use FrankenKaiser to get back to factory SPL when I attempt to go through the warranty process.
Any other suggestions??? Please let me know.
***Thanks for the help so far Jockey and pfcsabre***

I also have the at&t tilt kaiser version and used the North American Rom update from the HTC website to get it back up. Have you tried getting into tri color bootloader mode by holding the power and camera buttons then clicking the soft reset button then connecting to pc and flash the the official rom? That's what worked for me

also, are you getting any kind of notifications before it shuts down?

kaalgoosy said:
I also have the at&t tilt kaiser version and used the North American Rom update from the HTC website to get it back up. Have you tried getting into tri color bootloader mode by holding the power and camera buttons then clicking the soft reset button then connecting to pc and flash the the official rom? That's what worked for me
Click to expand...
Click to collapse
I have NOT been flashing this way. I have been flashing anytime I get to the tri-color screen, rather than this exact procedure you noted. (Tricolor bootloader--> then soft reset and back to tricolor bootloader) I don't know if this makes a difference or not, but I just tried your method with the rom from the HTC website AT&T Official Rom Download from HTC Website. Still no luck. It still turns off at the Windows screen.
Also, I do not get any kind of notification at all. It always resets before or at the Windows Mobile 6.X screen. I do get a distinctive chime the majority of the time right as it shuts down.

I was having random power down issues as well. This may or may not be the same as your problem, but mine ended up being a hardware issue with the camera itself. My device would suddenly say the camera (actual camera hardware not software) was not recognized and then soon after I would get the chime and then shut down. My only solution was to warranty it. Let's hope I have better luck with a replacement device then a lot of the other storries I have read around here.

Goin' for the warranty...
I want to try the warranty route now. I feel it's hardware at this point because I've already done FrankenKaiser.
Now, my problem lies with returning back to the factory SPL and Rom. I can use FrankenKaiser to UNDO "Security Unlocked" and then use JumpSPL via FrankenKaiser to get back to the factory SPL, but from that point, how do I get back to the original ROM?
Note that I still can't boot into Windows at all, and I will want to flash OEM Rom while I have the OEM SPL. Will the OEM SPL allow flashing back to the OEM Rom, WITHOUT JUMP SPL???
Thanks for your input..

HTC Hermes problem with bootloader

Welcome. For some time I have a problem with my htc. it all started with the fact that I bought hermes quickly on the Internet auction. At the very beginning
it turned out that WiFi does not work, and more precisely, the WiFi card has no address mac. After the short usufruct the device showed black white belts,
and they hung.After the reboot the hermes stopped on the Bootloader mode. On the screen are shown 4 belts (blue, green red and white) and is written:
HERM200
IPL-1.04
HERM200
SPL-2.10.Olipro
I was pressed for time then, therefore I put repair off until later. When I find some more free time, I turn on my hermes, and everything got back to normal.
I turned off smartphon, and I put to him sim card, next I turn on him, and everything joined in normally. Only Wi Fi stil didn't have mac address.
Everything acted correctly, to the moment when the battery went flat and phone was switched off. After connecting to the battery charger, on the screen
then again appeared a bootloader mode.after loading phone battery, I took batteries out on of 3 hours. Next I put her back, and I left hermes for a few
days. I thought perhaps the situation would repeat, and he will become operative, the same as it it took place last time. When I again turn on hermes, he
was again stopped on bootloader. mode. In this situation I thought that I should use mtty. I started mtty, and I performed the following activities:
Cmd>task 32
Level = 0
Cmd>set 14
Write Nand Success
HTCST ÚČŇHTCE
Cmd>task 8
Unfortunately these activities didn't help, so I tried with other method:
Cmd>task 32
Level = 0
Cmd>set 16
Write Nand Success
Cmd>task 8
but these also nothing changed it. Next steps which I carried out one after the other:
I tried to install the new software
(HER_VODA_1201616_1030600_UK_SHIP R:21200 D:51000 U:31102 P:0 EC:0X301 CB: - the RUU program showed Error 260)
next
(884202-ruu_hermes_qtek_fin_wwe_2[1].11.255.2_103_6275_1.38.00.10_108_ship - the update succeeded, but device still stayed in bootloader mode)
Next I still conducted a few updates but effects were similarly as in of the ones exchanged higher. I reached that perhaps problem is in the SPL. I carried
the upgrade out and downgrade but effects were similar like in case of the software. I tried also to update RadioROM, but effects were similar.
Perhaps somebody of you encountered such a problem, or knows how to untie him. I would be very grateful for the help.

HTC Ozone/Cedar 00.00MB and Stuck on Splash Solved!!

i got one of these devices a few days ago and didnt really worked until today. been messing around with itsutils with no success, not even to app unlock it!
solution is as simple and classic as it gets.
1. enter tricolor screen aka bootloader, volume down + power.
1. open mtty, select usb and press enter key
2. type "task 28" then enter key lots of bad blocks should show up!!
3. type "task 29" then enter this one should not give any errors.
4. reset device to tricolor screen and flash stock rom.
5. wait for it to boot and DONE!!
dunno exactly if both task are need but i did them in that order after a reboot and worked. feel free to ask.
remember to uncheck Allow usb connections on activesync.

how did you get mtty to connect?..nevermind got it working. THANKS!

Bugger... I wish I still had my phone on hand to try this out; I ended up sending it in for repair... almost 3 weeks ago. =/ I had a problem with my Ozone which caused the boot screen to lock up and apparently Sprint Snaps had the same issue caused by a "memory block issue." Wish I could have tried this to see if it would remedy that also. Cheaper than shipping and a lot faster too.
Glad to see that the 0 mb issue has a solution though!

Just tried it,
It worked, maybe make this a Stickie

i agree with you DJ_MiX.
a while ago edited the "guide" to make it a little more dummy friendly.

DJ_MiX said:
Just tried it,
It worked, maybe make this a Stickie
Click to expand...
Click to collapse
Do you mean that it works for the boot lockup problem where it sticks on the HTC logo? Rrrrgggg... If so, I just want PCD to send it back now!

this is for 0mb of storage available but who knows if it'll work for that cause it could. give it a try and post results.

DJ_MiX said:
Just tried it,
It worked, maybe make this a Stickie
Click to expand...
Click to collapse
Done, it's a sticky...cheers

el_venga said:
this is for 0mb of storage available but who knows if it'll work for that cause it could. give it a try and post results.
Click to expand...
Click to collapse
Wish I could. I'm supposed to get my repaired phone back from PCD pretty soon since I ran out of solutions to try about three weeks ago. The only other person that I found on here with this same issue had sent his phone in before me also. If this could help that issue, then Ozone users like me could boldly flash their phones without worrying about this lockup issue.
Perhaps I'll start a new topic looking for people with the lockup issue so they can test it.

chachi04 said:
Wish I could. I'm supposed to get my repaired phone back from PCD pretty soon since I ran out of solutions to try about three weeks ago. The only other person that I found on here with this same issue had sent his phone in before me also. If this could help that issue, then Ozone users like me could boldly flash their phones without worrying about this lockup issue.
Perhaps I'll start a new topic looking for people with the lockup issue so they can test it.
Click to expand...
Click to collapse
--
Well, you don't have to look too far I suppose... I just took my ozone out of the bottom of my drawer and surprise surprise, it is still in one piece!
I tried using MTTy. I have Windows 7 here with WMDC but even when I uncheck the allow USB connections option it doesn't connect. Get the "wceusbsh001: Cannot open port!" when I type in USB on the dropdown box. (only comm1 and 2 are listed)
Any solutions? I've even tried disabling the services of Windows Mobile Device center. No go. Restarted my computer, no go either.
I really want to switch back to my Ozone from my Moto Q. Please?
all the best,
Tomi

wow! It actually worked! Thanks so much for this, I have no idea how you actually figured it out-but it is so simple to just erase the rom flash!
Ok, first off. For those of you with Windows 7, MTTY will *not* work unless you update your HTC USB Sync drivers by using the drivers in this thread:
http://forum.xda-developers.com/showthread.php?t=540290
Download the driver for your platform-and follow those instructions. I'm not sure if Vista users are also the same way, but logically concluding I'd imagine.
Once I updated the drivers and rebooted, I ran the MTTY tool, typed in USB (note: it has to be all caps!) and got this when executing command: task 28
formatstorage Bad block found: 1882
formatstorage Bad block found: 1883
formatstorage Bad block found: 1884 formatstorage Bad block found: 1885
formatstorage Bad block found: 1886
formatstorage Bad block found: 1887
formatstorage Bad block found: 1888
formatstorage Bad block found: 1889
formatstorage Bad block found: 1890
formatstorage Bad block found: 1891
formatstorage Bad block found: 1892
formatstorage Bad block found: 1893
formatstorage Bad block found: 1894
formatstorage Bad block found: 1895
si backup: Erase physical block from 2032 to 2048
Format end
Cmd>
task 29 also ran down without any errors.
Now, after re-flashing, I have 67 mb free!
Again, thanks a lot for this-my Ozone has been Bricked since September and I honestly gave up all hope.
All the best,
Tomi

htc_Tomi said:
wow! It actually worked! Thanks so much for this, I have no idea how you actually figured it out-but it is so simple to just erase the rom flash!
Click to expand...
Click to collapse
Wait! So, you had phone that locked up at the HTC screen?!?! If so, this is amazing news and we should rename the thread so that HTC Lockup people can find this guide also!
Glad you could got a phone working again though; it's always an awesome feeling. =)

just edited the topic a little.

Man you guys are awesome... fixed the 0.00 mb problem using this.

Error during task 29
I have a MAPL110 (Snap) with SPL-1.20.0000.
I was able to run Task 28 with no errors (I think ???). However, Task 29 returns the follow error. After that my device remains idle in the splash screen and any attempt to flash with a coocked rom fails. On the other hand, the official ROM returns error "Invalid Vender Id". Any ideas?
Cmd>task 28
Format start
Fill RSVD information for block 288 to 321
Storage start sector=0xE000, total sector=0xCFC0
Storage start block=929, total block=831
Total Bad Block in CE: 1
Erase physical block from 1220 to 2032
si backup: Erase physical block from 2032 to 2048
Format end
Cmd>task 29
Format BINFS start
CE start start block=321, total block=1727
ERASE block 621 FAIL !!!
Write 0xFF start page=0x5040, total page=0x1AFC0
Format BINFS end

@papadchr you should flash a stock rom from original carrier. ozone/cedar is the verizon version, tmob is dash 3g and sprints is snap. some other carriers might sell the same models but only flash original carrier.

hey every one! noob here ....lol i wanted to comfirm this works on ozone! yes! back to normal and everything works great my thanks to everyone this recovered my ozone from a bad rom flash

AWESOME!! Thank you so much. This just got me out from under my first brick!! Now if only I can remember what i did wrong to get me there in the first place......

theryanguy said:
AWESOME!! Thank you so much. This just got me out from under my first brick!! Now if only I can remember what i did wrong to get me there in the first place......
Click to expand...
Click to collapse
You should not do it again

My Ozone with wm6.5
But I can't press and Hold keyboard replace "fn"
Can you help?
Thanks

[Q] Own build PC freezing for over 6+ months

Hello XDA!
I have a big question, and i don't know where to put it, so i put it here, here it starts:
I build an own pc, with everything included etc. and at first it worked great, until one moment when it just stopped working great and fast, and started freezing randomly.
At first i thought it was when i was watching an video, but now i know that's not the case, because i found out it is freezing at random moments,
I searched much, since december or so, but could not find any similar things.
I tried Dual-boot, with Windows 8 and Ubuntu running both, to see if windows 8 was the problem, it wasn't, because it did the same with Ubuntu.
I tried System reset ( Erase whole windows + All files), Did not work.
I updated all driver software, did not work.
at the end i tried chkdsk, because i thought, maybe it is the Disk, but everytime i do chkdsk, it freezes at 28%
last week i did something else, and it said that it found errors on the disk and i had to type chkdsk /f to fix it, when i did, it said No Write Permission on disk.
I also erased the whole disk with cmd ( All volumes, partitions etc.) but still, the odd thing is, it says everything is deleted, but still it shows the disk is 465GB big, which is odd because i have an disk of 500GB ( Now i know the disk itself takes up some space, but that's not 45GB, right?)
With freezing, i mean ''freezing'' by the way ( It wont start again, only when i press the power button) and when i watch a video or listen to music, i hear some annoying sound from the boxes too.
My specs are:
AMD A6-5400K ( APU)
Trinity", Black Edition
ASUS F2A85-M ( Motherboard)
Western Digital WD5000AAKX 500 GB ( HDD)
Corsair 8 GB DDR3-1600 Kit ( RAM Memory)
OCZ ModXStream Pro 700W ATX2 ( Power supply)
So.. Can anyone help maybe? Much appreciated!
Also: If someone knows how to make it writable again, let me know ( I tried one command what should do the trick, but cmd said Failed.)
PS: Is Not writable the same as Read only?
PPS: I overclocked my PC, yes, but that should not be a problem, because i resetted it multiple times.
PPPS: I changed the registry once, so it may be messed up a little, but the registry is resetted too when resetting windows, right?
Thanks!
If you guys need more info, Ask!

Off-Topic PC thread would be a better place for this.

By freezing do you mean that the pc is shutting down and nothing happens?
I would say make a stress test with every part of your hardware.
I found this:
http://www.computerhope.com/issues/ch001088.htm#00

With freezing i mean doing nothing... And stress test, i will look at it now.
Thanks!
Sent from my C6603 using xda app-developers app

I moved the OP to the Computer Hardware thread: http://forum.xda-developers.com/showpost.php?p=43359268&postcount=5340
Please refer all the discussion in its new home.
Thanks!