03.18.90
4.1.13.60
anybody tested it ???
I just installed it and it seems to be working fine. No apparent difference noticed...
Damaged
I've got a message
Damaged file!?
v5ev
Is this just for Elfins?
a lil bit more info would be great
fupeng said:
03.18.90
Click to expand...
Click to collapse
I guess this is the radio, right?
and
4.1.13.60
Click to expand...
Click to collapse
What is This?
ababrekar said:
a lil bit more info would be great
I guess this is the radio, right?
and
What is This?
Click to expand...
Click to collapse
Protocol version: 4.1.13.60
fupeng, Thanks! All great!
Here is the complete package for the upgrade: Radio_03.18.90.zip
Mackey84 said:
Is this just for Elfins?
Click to expand...
Click to collapse
elfin and elf
testing
I tried in my Elf for around 10 hours, it works fine as usual so far.
Thanks for sharing this.
The thing with radio is, usually if it's working fine for you then you're hesitant to upgrade it, especially if you're not 100% sure if the new radio version is stable ...
Can more ppl chime in if the new radio version is working fine?
The one thing I care more about is actually BT reception ... I have 3.07.90 and while the phone reception is pretty good, BT reception is terrible ...
Image file corrupted ... anyone has another source?
its not corrupted..probably u have to unlock the CID of ur phone...i am using it successfully on my phone for last 12-15 hours
How risky is it to update the Radio? If it goes wrong, can I update it again, or does it have the potential to brick my device like a ROM update?
htctouchp said:
its not corrupted..probably u have to unlock the CID of ur phone...i am using it successfully on my phone for last 12-15 hours
Click to expand...
Click to collapse
hey keep us in the loop on how things go over the next few days buddy .... if all is well after another 3-4 days I'll upgrade to this ROM too!
BTW, have you noticed any difference in battery drain?
number16 said:
hey keep us in the loop on how things go over the next few days buddy .... if all is well after another 3-4 days I'll upgrade to this ROM too!
BTW, have you noticed any difference in battery drain?
Click to expand...
Click to collapse
so far i've not seen any noticeable difference by using this radio, but i'm still monitoring the performance and if i notice something i'll surely update
there seems to be really less call drops in this radio version.. been using it since yesterday and havent dropped any call since.. thanks
htctouchp said:
so far i've not seen any noticeable difference by using this radio, but i'm still monitoring the performance and if i notice something i'll surely update
Click to expand...
Click to collapse
Sure thing ... thanks a lot!
And how do you update? Just use RUU and put the radio ROM in the same folder? And I guess you have to rename the .nbh file "ROM_signed.nbh"?
(Edit ... silly me... it's already named ROM_signed.nbh ... so I guess put it in the same folder as RUU and just run the Rom Update utility and it'll update itself?)
For those with Rogers Elfins, we have 03.07.90 for our current Radio version.
There is a thread that has this 03.07.90 version of the radio to download:
http://forum.xda-developers.com/showthread.php?t=342265
Would this work if we tried to do a restore of 03.07.90 on an Elfin?
dsixda, until someone's actually tried to downgrade back to 3.07.90 I guess we just won't know ... but good thing you have found the thread with the current radio ROM, so worse comes to worst you can always try.
I just know last time 3.12.90 was available, people upgraded to it, and had all sorts of problems with it (phone dropping connection for no reason), they were able to go back to 3.07.90 without any problem.
Which does not 100% guarantee you can go back from 3.18.90 to 3.07.90, but it's a good start. And really, here we hope the new radio is stable enough we won't have to go back anyways.
number16 said:
Sure thing ... thanks a lot!
And how do you update? Just use RUU and put the radio ROM in the same folder? And I guess you have to rename the .nbh file "ROM_signed.nbh"?
(Edit ... silly me... it's already named ROM_signed.nbh ... so I guess put it in the same folder as RUU and just run the Rom Update utility and it'll update itself?)
Click to expand...
Click to collapse
u r right... Just use RUU and put the radio ROM in the same folder and its ready
Related
tried 20 times now... downloaded the rar file form rapidshare....
extraced...
then ran the program keep getting the dam 101 connection error... what gives did everything perfectly...
Did the same thing here this afternoon and it went well here.
You didn't forget to set the Universal in bootloader mode?
robertwebbe said:
Did the same thing here this afternoon and it went well here.
You didn't forget to set the Universal in bootloader mode?
Click to expand...
Click to collapse
hmm... how u do that...
scott_donald said:
hmm... how u do that...
Click to expand...
Click to collapse
You can find this in the wiki: http://wiki.xda-developers.com/index.php?pagename=Radio only upgrade instructions.
By the way, a hard reset in not necessary if you only upgrade your radiostack, softreset is enough.
scott_donald said:
hmm... how u do that...
Click to expand...
Click to collapse
My God! It really scares me how many people have said this kinda thing recently!!! Honestly, people... it's a forum! Do some research!!!!
robertwebbe said:
You can find this in the wiki: http://wiki.xda-developers.com/index.php?pagename=Radio only upgrade instructions.
By the way, a hard reset in not necessary if you only upgrade your radiostack, softreset is enough.
Click to expand...
Click to collapse
you mean i just soft reset even though i`m still in bootloader mod?
ahmadfarid said:
you mean i just soft reset even though i`m still in bootloader mod?
Click to expand...
Click to collapse
Yes, once it is ready and says to hard-reset, unplug your Universal and just press the reset button.
By the way my friend, did you read the wiki?
keep us posted abt ur latest upgrade and how is ur new radio working?
robertwebbe said:
Yes, once it is ready and says to hard-reset, unplug your Universal and just press the reset button.
By the way my friend, did you read the wiki?
Click to expand...
Click to collapse
i`m always do a hard reset whenever i do radio upgrade..or CE upgrade..maybe i did not read the wiki carefully...
niketkumar said:
keep us posted abt ur latest upgrade and how is ur new radio working?
Click to expand...
Click to collapse
Until now no radio hangings for me. With 1.14.10 I probably had to reset already a couple of times.
Hopefully it will stay this way .
somehow i feel radio 1.14.10 is more stable here in Malaysia than radio 1.15.00. I lost signal few times on radio 1.15.00 and sometime the reception is intermitten.
Radio 1.15
Can someone post a link to it please.
Works firewall blocks rapidshare (
MarkJL said:
Can someone post a link to it please.
Works firewall blocks rapidshare (
Click to expand...
Click to collapse
see post : http://forum.xda-developers.com/showthread.php?t=298090
omega_
Senior Member Join Date: Jun 2005
Posts: 168
Radio 1.15
--------------------------------------------------------------------------------
Changelog: none at the moment
Radio-only upgarde guide:
ftp://xda:[email protected]/Uploads/Universal/Radio/11500_Radio_only.rar
Download links:
Code:
http://rs45.rapidshare.com/files/21256271/11500_Radio_only.rar
Radio 1.15
Job done. Thank you
scott_donald said:
tried 20 times now... downloaded the rar file form rapidshare....
extraced...
then ran the program keep getting the dam 101 connection error... what gives did everything perfectly...
Click to expand...
Click to collapse
If the error pops up on the PC display at the end of the flash process, don't worry...... this don't mean nothing, the data upload has finished regularly. Boot you device and check the Radio version....... it would be 1.15.00
I thought 1.15 had solved all my problems - I certainly never lost phone connection switching from 3G to GPRS (which I did with 1.13, 1.14 and, to a lesser extent 1.09) but now can't maintain a connection to the internet!
I upgraded to 1.15 earlier on in the week and all seemed to be finmr until 8:26 yesterday morning (the last time activesync synched my push email) Since then I get connectine, then locating foolowed bu a message telling me my connection has been dropped. This happens at home in mid-sussex and at work in Woking and in between so not a localised proiblem.
I'm using an O2 Exec on T-Mob W'n'W using jwrightmscp's WM6 - anyone else having problems?
<--Still rolling with 1.09
htc p3650 russian version
i've flashed it many times and never have problem before.
my device has been unlocked.
last night,i flashed a china mobile's official rom and then i forgot to
unlock,just flashed the other roms but then finished 100%,cannot
hard reset just virbrated couldnot stop,needs to unload the battery.
i have checked the spl is the same like unlock ones but i have tried many
roms including official english rom,the problem still exit.kindly help me to
solve it
chry21 said:
htc p3650 russian version
i've flashed it many times and never have problem before.
my device has been unlocked.
last night,i flashed a china mobile's official rom and then i forgot to
unlock,just flashed the other roms but then finished 100%,cannot
hard reset just virbrated couldnot stop,needs to unload the battery.
i have checked the spl is the same like unlock ones but i have tried many
roms including official english rom,the problem still exit.kindly help me to
solve it
Click to expand...
Click to collapse
Flash it or flash other rom via bootloader..
kostas244 said:
Flash it or flash other rom via bootloader..
Click to expand...
Click to collapse
i have flashed the other official roms including spl os radio but failed,all of them can be written 100% but can start the device just virberting.
i have done it under the bootloder.thanks
chry21 said:
i have flashed the other official roms including spl os radio but failed,all of them can be written 100% but can start the device just virberting.
could u pls give me the program of bootloader.thanks
Click to expand...
Click to collapse
Press and hold the camera button...reset with the stick.....when you can see the color bars release the stick and after the camera button..
If the color bars is in your screen , everything is ok.You can flash the rom.
The color bars is the bootloader.
I wonder what's your radio version....
kostas244 said:
Press and hold the camera button...reset with the stick.....when you can see the color bars release the stick and after the camera button..
If the color bars is in your screen , everything is ok.You can flash the rom.
The color bars is the bootloader.
I wonder what's your radio version....
Click to expand...
Click to collapse
ok i got ur meaning
i always flashed the rom under bootloader
i can flash it to 100% but can not start
any good ways can solve?
thanks do u have msn we can talk on line
chry21 said:
ok i got ur meaning
i always flashed the rom under bootloader
i can flash it to 100% but can not start
any good ways can solve?
thanks do u have msn we can talk on line
Click to expand...
Click to collapse
Check again if the hard spl is right.
No need to hard spl the device when you want to flash a new rom.
Hard spl is for one time and that's it.
If your radio version is 1.65.xx.xx ,you must downgrade it first to 1.59.xx.xx.
I don't have MSN..
my msn is [email protected]
thanks again
kostas244 said:
Check again if the hard spl is right.
No need to hard spl the device when you want to flash a new rom.
Hard spl is for one time and that's it.
If your radio version is 1.65.xx.xx ,you must downgrade it first to 1.59.xx.xx.
I don't have MSN..
Click to expand...
Click to collapse
hard spl is right,uncloked 2.0 i ve flashed before.
i flashed the official full rom including 1.59 radio
chry21 said:
hard spl is right,uncloked 2.0 i ve flashed before.
i flashed the official full rom including 1.59 radio
Click to expand...
Click to collapse
No..no...I said only the radio first....try it please...ONLY the radio.
Find in this forum any 1.59.xx.xx and try..
kostas244 said:
No..no...I said only the radio first....try it please...ONLY the radio.
Find in this forum any 1.59.xx.xx and try..
Click to expand...
Click to collapse
according to your meaning
maybe i can try flash radio 1.59 first then flash common rom without radio?
someone told that radio maybe locked?
kostas244 said:
No..no...I said only the radio first....try it please...ONLY the radio.
Find in this forum any 1.59.xx.xx and try..
Click to expand...
Click to collapse
sorry,failed again.
i fashed the radio 159.42.23 and then flashed one common rom without radio
chry21 said:
according to your meaning
maybe i can try flash radio 1.59 first then flash common rom without radio?
someone told that radio maybe locked?
Click to expand...
Click to collapse
Ohhh come on...Did you Hard spl your device with Olipro hard spl v2?? Good !!!
If the radio that you have right now is 1.65.xx.xx ,you never let you flash any other rom with included radio,until you downgrade first your radio to any 1.59.xx.xx.
So you must try first a new radio and after if everything goes well ,flash your original Htc's rom..
kostas244 said:
Ohhh come on...Did you Hard spl your device with Olipro hard spl v2?? Good !!!
If the radio that you have right now is 1.65.xx.xx ,you never let you flash any other rom with included radio,until you downgrade first your radio to any 1.59.xx.xx.
So you must try first a new radio and after if everything goes well ,flash your original Htc's rom..
Click to expand...
Click to collapse
my radio always 1.59 i never flashed the 1.65radio
bootloader shows:
POLA100 MFG
SPL-2.20.0linex
CPLD-2
at the moment,i flashed 1.59.42.23 first then i flashed wm6.5rom without radio,which rom was done by one man
after i did these 2 steps but still the same problem
chry21 said:
my radio always 1.59 i never flashed the 1.65radio
at the moment,i flashed 1.59.42.23 first then i flashed wm6.5rom without radio,which rom was done by one man
after i did these 2 steps but still the same problem
Click to expand...
Click to collapse
Too bad then..........very strange....I'll search for it..if i find something i'll let you know...For now keep trying with official roms with radio included..
good luck..
kostas244 said:
Too bad then..........very strange....I'll search for it..if i find something i'll let you know...For now keep trying with official roms with radio included..
good luck..
Click to expand...
Click to collapse
thanks in advance.
i also doubt the radio has problem,u see the bootloaer shows right,indicate this device has unlocked.when i finished flash,i can see the device want to start but it seems no ablitity to .just viberting
chry21 said:
thanks in advance.
i also doubt the radio has problem,u see the bootloaer shows right,indicate this device has unlocked.when i finished flash,i can see the device want to start but it seems no ablitity to .just viberting
Click to expand...
Click to collapse
when vibrating you see the R: G: D: screen, or screen is blank?
FW-eXXon said:
when vibrating you see the R: G: D: screen, or screen is blank?
Click to expand...
Click to collapse
i cannot seen anything.because the mobile cannot start the screen is black never open.
by the way,i flashed the official rom russian version according to my device.i downloaded from
the htc website through my device's s/n
I haven't big knowledge in Polaris hardware but i think its IPL it cant start device.
One thing, find a full dump of original rom with IPL, SPL, Radio and OS and try to flash it.
But if that dont help - too bad =( maybe bad sectors in IPL
FW-eXXon said:
I haven't big knowledge in Polaris hardware but i think its IPL it cant start device.
One thing, find a full dump of original rom with IPL, SPL, Radio and OS and try to flash it.
But if that dont help - too bad =( maybe bad sectors in IPL
Click to expand...
Click to collapse
i flashed the official roms which including the ipl spl radio and os.
do u meant i should find a full rom to dump it and then to flash them one by one? but the problem is i can not flash the ipl under the bootloader
i have dumped the full rom of htc original one but just have spl.nb windows.nb splash.nb radio.nb i cannot see the ipl
who can give me a better tool to dump?
Here new RUU for Supersonic
http://www.filefactory.com/file/b44...0.09.01_NV_1.77_003_release_157088_signed.exe
Enjoy!
I will be using this thanks for the RUU as always
Thanks Football!
How do you install this?? Flash via recovery??
xxbabiboi228xx said:
I will be using this thanks for the RUU as always
Click to expand...
Click to collapse
What driver do I need to install this rom?? Do I need adb??
javidnky2005 said:
How do you install this?? Flash via recovery??
Click to expand...
Click to collapse
You just need to connect your phone to your PC and run the exe. This will remove root, if your are rooted.
I just cannot get this thing to go. It just sits at waiting for bootloader for a few minutes then gives me a USB connection error. What gives?
sorry Football if i am sounding like i am doubting you but is this official? i'm only asking cuz i didn't think they would release a full RUU for such a small and minor update to the phone that may or may not affect certain people, and i also noticed that the dates for the last RUU of 3.30.651.2 were all the same from within the .zip file, but this one looks like they just pieced it together. thank you very much, i am downloading now!
onelovekir said:
sorry Football if i am sounding like i am doubting you but is this official? i'm only asking cuz i didn't think they would release a full RUU for such a small and minor update to the phone that may or may not affect certain people, and i also noticed that the dates for the last RUU of 3.30.651.2 were all the same from within the .zip file, but this one looks like they just pieced it together. thank you very much, i am downloading now!
Click to expand...
Click to collapse
They build a RUU for every update.
ok thank you, just had to check cuz i'm bout to put together a new ROM now, thanks guys!!
thanks football
cosine83 said:
I just cannot get this thing to go. It just sits at waiting for bootloader for a few minutes then gives me a USB connection error. What gives?
Click to expand...
Click to collapse
Yeah I'm having the same exact problem. What's wrong with it?
Here you folks go. Off of my phone to you. http://www.multiupload.com/YOXKQ18YW0. You Must have 2.1 with the 3.6 Update. I would recommend making a backup before applying. Use at your own use. If you get a Status 7 error, see my thread in the General forum on how I resolved it. Have Fun!
how is it? faster than 2.1?
Oh yeah. More bloatware, but that's easy to remove. Internet speed is faster. Phone is more responsive. Nice to have the Hotspot feature now. Overall a worthy upgrade. Now to wait for 2.3
can i use this update for my finland rom 3.42? or this is just for TMo version?
runeblade said:
Here you folks go. Off of my phone to you. http://www.multiupload.com/YOXKQ18YW0. You Must have 2.1 with the 3.6 Update. I would recommend making a backup before applying. Use at your own use. If you get a Status 7 error, see my thread in the General forum on how I resolved it. Have Fun!
Click to expand...
Click to collapse
Would you happen to have original t-mobile 2.1 in sbf format?
Unfortunately no-one has one for the US. I'm guessing you updated to the leaked version? The good news is that if my suspicion is correct a nandroid backup of this should play fine with the updated firmware. If you look at the difference its minor. 34.4.9 vs 34.4.4. I have not yet had the time to make one yet. I'll try to do so tonight.
What did you have to do with the update.zip in order to upgrade your defy? I'm on 2.1 with the 3.6 update, I'm rooted with superoneclick, and I have it copied to the root of my sd. Did you use clockworkmod recovery?
nanek921 said:
What did you have to do with the update.zip in order to upgrade your defy? I'm on 2.1 with the 3.6 update, I'm rooted with superoneclick, and I have it copied to the root of my sd. Did you use clockworkmod recovery?
Click to expand...
Click to collapse
Its an update zip file signed by company so you should enter stock recovery by power+vol down and then select update from zip.
hmm... how about flash 3.4.2-107 TMobile US Blur with RSDlite and then
update.zp?
Just tried it. No go.
It checks for the right build fingerprint before it continues. You need to have 6.36.0 or it aborts.
The Nandroid backup theory mught be the one that works...
no clue said:
hmm... how about flash 3.4.2-107 TMobile US Blur with RSDlite and then
update.zp?
Click to expand...
Click to collapse
Beach_Head said:
Just tried it. No go.
It checks for the right build fingerprint before it continues. You need to have 6.36.0 or it aborts.
The Nandroid backup theory mught be the one that works...
Click to expand...
Click to collapse
Thanks for the update.
...... I just want something official now
( I am on official Chinese 2.21 build 1.11, it is fast, specially when you skip Blur registration. But, just in case I need my phone service by t-mobile .... )
The leaked T-Mobile SBF was fast too.
But yeah, an official one would be better.
If the Nandroid method doesn't work, I hope someone posts an SBF soon...
no clue said:
Thanks for the update.
...... I just want something official now
( I am on official Chinese 2.21 build 1.11, it is fast, specially when you skip Blur registration. But, just in case I need my phone service by t-mobile .... )
Click to expand...
Click to collapse
As for right build fingerprint, yes you are right. It is picky as hell. In the other thread I also mentioned that it is checking for apps. For example, I have Blockbuster disabled....it checked for it, didn't find it, and failed. I spent over 4 hours last night getting this to a point that it would work. Way Way too much hassle. Unfortunately I don't think I'm going to get to do a backup tonight. Was up way too late last night/this morning working on this and put in a 12 hour day. As soon as I get a breather I will. Sorry.
No worries!
Is there any way to edit the build.prop file so that I can get the update to work?
runeblade said:
As for right build fingerprint, yes you are right. It is picky as hell. In the other thread I also mentioned that it is checking for apps. For example, I have Blockbuster disabled....it checked for it, didn't find it, and failed. I spent over 4 hours last night getting this to a point that it would work. Way Way too much hassle. Unfortunately I don't think I'm going to get to do a backup tonight. Was up way too late last night/this morning working on this and put in a 12 hour day. As soon as I get a breather I will. Sorry.
Click to expand...
Click to collapse
Unfortunately I don't have an un-updated Defy in front of me to pull the strings. I'll look at one of the ones at work tomorrow. If you read the error though it should tell you exactly what it is looking for. Mine did. Aslo try deleting the logwrapper. The was one of the holdups on mine.
I have the string. I'm just wondering if it would work if I do edit it...
Where do I locate logwrapper?
runeblade said:
Unfortunately I don't have an un-updated Defy in front of me to pull the strings. I'll look at one of the ones at work tomorrow. If you read the error though it should tell you exactly what it is looking for. Mine did. Aslo try deleting the logwrapper. The was one of the holdups on mine.
Click to expand...
Click to collapse
I just loaded this update.zip on my fiance's Defy...didn't wipe data or cache, it's booting right now....stuck at the T-Mobile "Stick Together" screen, waiting for the initial long boot
EDIT: Booted, running 2.2.1 now! So far so good, it's a little slow but it would be while it catches up. I have an Atrix and it's almost the identical interface.
can you make a sbf file of entire build?
Nandriod back up please! im dying for it
zencoran said:
Nandriod back up please! im dying for it
Click to expand...
Click to collapse
just flash the update.zip...why bother with a nandroid?
please help me .
Fisrt i have a 2.51 version next i put in the phone the JRDNEM_U3_3.4.2_155-002_DEBLUR_SIGN version but i can flash any rom.
So i try to flash USA version JORDN_U3_6.36.0_SIGNED_USAJRDNTMOB1B4B5DE1028.0R_JORDANTMO_P022_HWp3_Service1FF.sbf and it works but when i try to come back to 2.51 after installing 2.51 bootloader i can see anything
NB: sorry if my english is bad
Im no expert but i'm sure your phone will be alive again.
But i'm not know what do you intend to do?
there are a lot of roms undowngradable, and i dont think that you will be able to come back to the rom you had, you are probably flashing inferior version, so you will have to try to flash another bootloader and see if it boots, http://forum.xda-developers.com/showthread.php?t=966537
If that doesnt work, you will have to flash a full image SBF to boot the phone.
thanks man,
i figure out that the phone wanted my battery 100% but it is almost empty but i find a way to tell him that battery is 100% and i flash usa version
xuidavy said:
thanks man,
i figure out that the phone wanted my battery 100% but it is almost empty but i find a way to tell him that battery is 100% and i flash usa version
Click to expand...
Click to collapse
glad to hear you solved your problem. just out of curiosity, where did you get "JORDN_U3_6.36.0" as an SBF file? it's nowhere to be found.
if you can, u/l a copy somewhere, in case someone might need it.
I find it there :http://and-developers.com/sbf:defy
xuidavy said:
I find it there :http://and-developers.com/sbf:defy
Click to expand...
Click to collapse
LOL, must have skipped my my mind, i already have it.
On the upside, they have 6.19 now, which I believe they didn't a few days back.