Soft reseting a hp ipaq 514 - Non-Touchscreen Windows Mobile Other

hi
iv read this is meant to be done after you've installed some programs
but how do you do it on this version?
Thanks

Power OFF->ON

loly said:
Power OFF->ON
Click to expand...
Click to collapse
oh it that it?
I read on another forum that you put the phone in standby and the turn it off....

Related

Need Ugrent Help!!!!

hi,
i have a prophet. While updating my PDA to Prophet Orange UK ROM, everything went well, and the installation was successful.
After that, on the PDA, the blue Windows Mobile screen came up, and suddenly, the PDA switched off, and since then, it isn't starting. When i connect it to charge, it does not charge either!
Please please please help me ASAP!
Thankyou.
Hi solarromeo,
welcome to this forum maybe this thread could be helpful for you. click here
If this solved your problem then I advise you to use the search button on top as I did to find this thread.
Have fun
GAMBIT999 said:
Hi solarromeo,
welcome to this forum maybe this thread could be helpful for you. click here
If this solved your problem then I advise you to use the search button on top as I did to find this thread.
Have fun
Click to expand...
Click to collapse
Hi, but this did not work for me, thats y i m asking, what should i do????????????????????????????
solarromeo said:
Hi, but this did not work for me, thats y i m asking, what should i do????????????????????????????
Click to expand...
Click to collapse
Could anyone please help me??????????????????????
Did you try to leave it charge for a few hours with the wall charger. And leaving it connected eventhough the charging light doesnt turn on?
GAMBIT999 said:
Did you try to leave it charge for a few hours with the wall charger. And leaving it connected eventhough the charging light doesnt turn on?
Click to expand...
Click to collapse
Yes, i did, i left it on charge with the wall charger for about 4 hours now! and the light does not turn on, nor does it respond to any of the buttons i press on the pda! any help please?
solarromeo said:
Yes, i did, i left it on charge with the wall charger for about 4 hours now! and the light does not turn on, nor does it respond to any of the buttons i press on the pda! any help please?
Click to expand...
Click to collapse
ANY HELP???????????????
solarromeo said:
ANY HELP???????????????
Click to expand...
Click to collapse
Please stop using this amount of question marks, that's childishly and won't resolve your problem faster.
Have you even tried to go into bootloader and reflash your device with another rom ?
redandr said:
Please stop using this amount of question marks, that's childishly and won't resolve your problem faster.
Have you even tried to go into bootloader and reflash your device with another rom ?
Click to expand...
Click to collapse
Yes, have tried getting it into bootloader, but the pda does not respond at all to any of the buttons!
solarromeo said:
Yes, have tried getting it into bootloader, but the pda does not respond at all to any of the buttons!
Click to expand...
Click to collapse
It's not necessary that your pda does respond to any buttons in the bootloader, you should only try to reflash it in with another rom (for example with NVID).

PSShutXP,Aku3.3.13 Aserg

The PSShutXP of aku3.3.13Aserg doesn't works well
I pressed the power button of my Qtek s200,then the PSShutXP started
Stand by,Turn off and Reset
After I pressed Turn off,my device just stand by,didn't turn off the power.
How to solute this problem?And how to unistall the PSShutXP..Thx
No one can help me?
Is any way to unstall this program?I can't turn off my device now.....
Please wait a bit more that an hour before asking again!!!
Have a look at this
http://forum.xda-developers.com/showthread.php?t=292925&page=51
kingzmx said:
No one can help me?
Is any way to unstall this program?I can't turn off my device now.....
Click to expand...
Click to collapse
Shutdown
The solution is given in:
http://forum.xda-developers.com/showpost.php?p=1141775&postcount=168
urr, the solution is also given in ...
Your solution fixes the problem, mine only works around it.
2241Alexanders said:
The solution is given in:
http://forum.xda-developers.com/showpost.php?p=1141775&postcount=168
urr, the solution is also given in ...
Click to expand...
Click to collapse
Thx...
Now,it works well

'Press Send to restore factory default' message is missing

I recently upgraded to ASERG ROM and after that the message 'Press Send to restore factory default' was gone in the bootlader screen in order to hard reste my device.
Currently I have installed the Smart1 v1.3 ROM (it's a great ROM!) and I was hoping to get the message back. But it is still not shown, so I cannot hard reset my device this way.
Can anybody help me with this problem?
Soft reset and try with AKU2.2 again!
Wantoknow said:
Soft reset and try with AKU2.2 again!
Click to expand...
Click to collapse
What do you mean with 'try AKU2.2 again'?
HappyFace said:
What do you mean with 'try AKU2.2 again'?
Click to expand...
Click to collapse
It means ROM Prophet_220734_2207114_24721
you can download RUU_Prophet_220734_2207114_024721_NVID from this link
http://rapidshare.com/files/18507453/RUU_Prophet_220734_2207114_024721_NVID.exe
secoseco said:
you can download RUU_Prophet_220734_2207114_024721_NVID from this link
http://rapidshare.com/files/18507453/RUU_Prophet_220734_2207114_024721_NVID.exe
Click to expand...
Click to collapse
I just flashed my S200 with this ROM, but it did not fix the problem. The message is still not shown.
HappyFace said:
I just flashed my S200 with this ROM, but it did not fix the problem. The message is still not shown.
Click to expand...
Click to collapse
Try to useing another ROM like Jester, If it still not appear, release the battery and do not used the device for 24 hours and try to put the battery again.
owleng said:
Try to useing another ROM like Jester, If it still not appear, release the battery and do not used the device for 24 hours and try to put the battery again.
Click to expand...
Click to collapse
I have tried both solutions, but these did not work also.
Anybody another idea?
dear
just use clear storage program to restore to factory settings default
I think it is hardware problem, the comm manager button has a problem, is it works in windows
try to clean under this button, do it carefully
paradis_pal said:
dear
just use clear storage program to restore to factory settings default
I think it is hardware problem, the comm manager button has a problem, is it works in windows
try to clean under this button, do it carefully
Click to expand...
Click to collapse
I do not think that this is a hardware problem, because I can get into the bootloader screen using the Power and ComMannager button together with the reset. But I do not get the messge and pressing the Send button does not hard reset my device.
dear the bootloader only needs the camera button, I think it is hardware problem just clean the button
HappyFace said:
I do not think that this is a hardware problem, because I can get into the bootloader screen using the Power and ComMannager button together with the reset. But I do not get the messge and pressing the Send button does not hard reset my device.
Click to expand...
Click to collapse
and it is not the power button
Happy Face, you will need to reinstall your last wm5 vendor rom, & then do the 2 step process of the upgrade again.
Use ONLY the nvid file of the 1st step from PDAviet wm6 rom for this part of process:
http://forum.xda-developers.com/showthread.php?t=308266
he did use it, I'm sure his problem is hardware, cause he press the 2 buttons and he goes to the bootloader, it not about the rom it is from the IPL or hardware problem, and I think it is hardware one
plesae does the comm manneger works in windows?
I have used another NVID WM5 and the message (together with the hard reset functionality) is back.
Thank you all!

Restarts each time it enters standby

For some strange reason my Vario restarts each time it enters standby.
Either when I press the button or when the backlight/system times out so it enters standby automatically...
Anyone seen this kinda thing before and know a solution?
matthijst said:
For some strange reason my Vario restarts each time it enters standby.
Either when I press the button or when the backlight/system times out so it enters standby automatically...
Anyone seen this kinda thing before and know a solution?
Click to expand...
Click to collapse
This is Wizard > Wizard Mobile 6 why did you posted it in here?
Because I'm using WM6 on it (the Microsft released version)?
matthijst said:
Because I'm using WM6 on it (the Microsft released version)?
Click to expand...
Click to collapse
Then you should be more specific about your problem.
IPL/SPL
RADIO
Model
Have you tested hard reset?...
matthijst said:
Because I'm using WM6 on it (the Microsft released version)?
Click to expand...
Click to collapse
There is no officiall version of WM6 for HTC Wizard
All we discuss here are unofficiall ones... Which one do you use?
Mirek
IPL & SPL 2.26
I'm using InGeNeTiCs' version of WM6....
I just did a hard reset, but the damn thing keeps rebooting...
Seems more like a hardwareproblem then, right?
Althoug it IS strange that it also reboots after the display timeout...
If I press the standby button and repress it within a second then the screen comes back on again. I I wait a bit longer (so 2 secs and longer) it stays off and reboots
matthijst said:
IPL & SPL 2.26
I'm using InGeNeTiCs' version of WM6....
I just did a hard reset, but the damn thing keeps rebooting...
Seems more like a hardwareproblem then, right?
Althoug it IS strange that it also reboots after the display timeout...
If I press the standby button and repress it within a second then the screen comes back on again. I I wait a bit longer (so 2 secs and longer) it stays off and reboots
Click to expand...
Click to collapse
What steps did you folowed to upgrade to WM6?
joaosousa said:
What steps did you folowed to upgrade to WM6?
Click to expand...
Click to collapse
I flashed the NEW ROM straight away, over the old Faria ROM that I had.
It worked fine for about a week or so, but now it starts acting up.
I just did a hard reset, bu it the reboots are still there.
Any advice how to flash another ROM?
Should I go back to some other ROM version first, or is there a WM6 ROM you would recommend which first "clears" everything currently in ROM and Extended ROM?
You should read this:
http://forum.xda-developers.com/showthread.php?t=298613
joaosousa said:
You should read this:
http://forum.xda-developers.com/showthread.php?t=298613
Click to expand...
Click to collapse
Thanks, will try that!

please help my mda stucks when it starts

just upgraded my phone vesion from wm6.1 19199 touchflo to wm6.1 19209 touchflo yesterday.. and it worked well, until now, i am trying to turn on the phone but it stucks at " windows mobile 6.1 professional ".
i tried to turn it on a lot of times and to do soft reset and take the battery out but it is the same all the times. i also charge the battery but it is full and it still happens.
please! what can i do??
asaf_hermann said:
just upgraded my phone vesion from wm6.1 19199 touchflo to wm6.1 19209 touchflo yesterday.. and it worked well, until now, i am trying to turn on the phone but it stucks at " windows mobile 6.1 professional ".
i tried to turn it on a lot of times and to do soft reset and take the battery out but it is the same all the times. i also charge the battery but it is full and it still happens.
please! what can i do??
Click to expand...
Click to collapse
Hard reset
how??
i cant turn it on, it stucks at the beginning
asaf_hermann said:
how??
i cant turn it on, it stucks at the beginning
Click to expand...
Click to collapse
The wiki is your friend.
can you please tell me what to do?
asaf_hermann said:
can you please tell me what to do?
Click to expand...
Click to collapse
To perfomr a Hard Reset :-
In this scenario the common solution is to do a hard reset,to do the Hard reset.Press and hold the comm manager button and the voice command button,while keep the two buttons pressed,and at the same time,use the stylus to lightly press and hold the Reset button,the phone will reboot and ask for confirmation,accept it and phone will do a hard reset.check if it helps,otherwise,most probably,its a bad flash or the the extended_rom is corrupted.Reflash the official carrier's rom to clear/correct the extended_rom or reflash the TNT 19209 touchflo ,do this with getting into Bootloaders (Tricolor screen),hope it'll work.
the first solution dont work, in the second i press the reset button it resets and still have the problem.
the other solution i dont understand. my phone cannot connect activesync so i cant flash a new rom.. if thats what you tried to say
ultimate solution is with me
if everything fails the i will request u to send ur set to me...by some chance when my set stuck the last time i had a friend in o2 service centre and he took my phone and flashed a new rom in 2 hrs. let me know if that suits u.....mail me at [email protected] and i will get it done for u
naren3108 said:
if everything fails the i will request u to send ur set to me...by some chance when my set stuck the last time i had a friend in o2 service centre and he took my phone and flashed a new rom in 2 hrs. let me know if that suits u.....mail me at [email protected] and i will get it done for u
Click to expand...
Click to collapse
Be a sport,don't start posting the same request and offering your service to everybody and in every thread, requesting them to send their phones to you for repair,you know it yourself its not feasible and practical.If you have a genuine solution,why don't you start a new thread and post the procedure alongwith the software you claim you have to revive a phone in this manner,if you honestly intend to help and do a service to the community. According to your name and email ,I presume you are somewhere in India,do you think,its viable to send all the phones from all around the world to you for repair,NO kidding !!! I don't mean any offense towards you though !
asaf_hermann said:
the first solution dont work, in the second i press the reset button it resets and still have the problem.
the other solution i dont understand. my phone cannot connect activesync so i cant flash a new rom.. if thats what you tried to say
Click to expand...
Click to collapse
Activesync will not work in this situation,but if you are able to get into Bootloaders (tricolor screen) its possible to flash a rom,and you don't need to activesync to perform a flash,infact when you start a Rom to flash,it automatically cuts off the activesync all by itself even in the normal condition,so don't worry if the activesync doesn't work now,just try to get into Bootloaders mode and flash a rom.
how can i get into bootloaders mode?
asaf_hermann said:
how can i get into bootloaders mode?
Click to expand...
Click to collapse
Press and keep holding down Camera button and at the same time Soft reset or
Camera Button + Power on the phone,it'll take the phone into Bootloaders mode (tricolor screen).While in Bootloaders, Hook up the phone with pc via usb cable,watch small usb appear at the bottom of the Bootloaders and run the RUU,it'll start to flash the Rom,ok
if everything fails rememer me........but be fast and stop trying all hanky panky things on ur device it can damage it further........
zabardast_1 said:
Press and keep holding down Camera button and at the same time Soft reset or
Camera Button + Power on the phone,it'll take the phone into Bootloaders mode (tricolor screen).While in Bootloaders, Hook up the phone with pc via usb cable,watch small usb appear at the bottom of the Bootloaders and run the RUU,it'll start to flash the Rom,ok
Click to expand...
Click to collapse
yesss.. thanks!! it works!
the bootloader worked.. thank you very much! i really appreciate your work and time that you spend for me. thank you! you saved my phone.

Categories

Resources