Hi!
Is there anywhere that you could download the original release of WM6.1 without all the HTC mods but with the sliding interface as seen here? http://blogs.msdn.com/windowsmobile...-of-cool-new-windows-mobile-6-1-features.aspx
WIKI
Read the WIKI there you will find it!
Cheers
I know who has it.
most of what u see on the video is for smart phones and not for pocket pc. and this is a kaiser forum !
Sorry! I know this is a Keiser forum. It was just a question. Delete this thread if you like
Laurentius26 said:
I know who has it.
Click to expand...
Click to collapse
Me too But I'm just trying one of yours 'cos it's better
lildogg said:
... and this is a kaiser forum !
Click to expand...
Click to collapse
Um, the Tytn II is the Kaiser. Just in case you didn't know.
This public educational awareness message brought to you by forum trolls everywhere!
g0mib0y said:
Hi!
Is there anywhere that you could download the original release of WM6.1 without all the HTC mods but with the sliding interface as seen here? http://blogs.msdn.com/windowsmobile...-of-cool-new-windows-mobile-6-1-features.aspx
Click to expand...
Click to collapse
This is not possible. That sliding interface is for WM6.1 standard. It is designed for smartphones (non-touchscreen). WM6.1 Professional is for the Kaiser/TytnII. It does not have that interface.
1. Most of that loooong Video is about WM6.1 Standard for Smartphones (sans touchscreen).
2. This question has been asked time and again, there are several threads with "official" test roms of WM6.1 but nothing has "officially" shipped yet.
3. I'm closing this thread for the above 2 reasons.
Related
Hi there,
I'll hopefully get my HTC TyTN delivered end of this week.
Upfront a few, but essential questions (sorry if misposted here but there isn't yet something like a HTC Hermes group):
1. Green Home Screen
Some of you like it, I was a bit shocked. Also I'm of the opinion that the contrast is better with the traditional blue colored Home Screen.
Has anyone of you any idea on how to switch back to the traditional blue colored homescreen ?
Would that be an easy task or require modification of the firmware ?
2. HSDPA/EDGE Hack
As far as I know the TyTN also supports EDGE. Btw: can anyone confirm this ?
While the EDGE Tweak works perfectly on my MS Smartphone (Qtek 8300), will it also work on the TyTN ?
Is there also a HSDPA Tweak, thus enabling e.g. a "H" instead of an "U" ?
3. PDF User Manual
Does anyone know where it can be downloaded from ?
Is it on the CD delivered with the device ?
If so would anyone be so kind as to upload it to the ftp ?
4. Customized Case for the TyTN
The case for the Wizard should fairly fit, though maybe not perfectly.
If you compare the dimension of the Wizard and the TyTN in particular the lengths are different by some 4mm, which could make the case not fit so well.
Has anyone already seen a customized case specially designed for the TyTN ?
Is there one delivered within the box ? If so does it fit well and look cute ?
5. HTC Hermes Forum
I herewith kindly ask the moderators to open up a dedicated HTC Hermes Forum in order to have the increasing number of postings related to that new type of device posted (and picked) there !
Relying on profound community feedback.
Thanks so much.
ghl10000 said:
Hi there,
5. HTC Hermes Forum
I herewith kindly ask the moderators to open up a dedicated HTC Hermes Forum in order to have the increasing number of postings related to that new type of device posted (and picked) there !
Relying on profound community feedback.
Thanks so much.
Click to expand...
Click to collapse
Seconded.
fermin said:
ghl10000 said:
Hi there,
5. HTC Hermes Forum
I herewith kindly ask the moderators to open up a dedicated HTC Hermes Forum in order to have the increasing number of postings related to that new type of device posted (and picked) there !
Relying on profound community feedback.
Thanks so much.
Click to expand...
Click to collapse
Seconded.
Click to expand...
Click to collapse
Thirded
rkorzuch said:
fermin said:
ghl10000 said:
Hi there,
5. HTC Hermes Forum
I herewith kindly ask the moderators to open up a dedicated HTC Hermes Forum in order to have the increasing number of postings related to that new type of device posted (and picked) there !
Relying on profound community feedback.
Thanks so much.
Click to expand...
Click to collapse
Seconded.
Click to expand...
Click to collapse
Thirded
Click to expand...
Click to collapse
fourthed
dimushor said:
rkorzuch said:
fermin said:
ghl10000 said:
Hi there,
5. HTC Hermes Forum
I herewith kindly ask the moderators to open up a dedicated HTC Hermes Forum in order to have the increasing number of postings related to that new type of device posted (and picked) there !
Relying on profound community feedback.
Thanks so much.
Click to expand...
Click to collapse
Seconded.
Click to expand...
Click to collapse
fourthed
Thirded
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Hi modos, can you please do something?
Thanks
luke.a.jones said:
dimushor said:
rkorzuch said:
fermin said:
ghl10000 said:
Hi there,
5. HTC Hermes Forum
I herewith kindly ask the moderators to open up a dedicated HTC Hermes Forum in order to have the increasing number of postings related to that new type of device posted (and picked) there !
Relying on profound community feedback.
Thanks so much.
Click to expand...
Click to collapse
Seconded.
Click to expand...
Click to collapse
fourthed
Thirded
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse
eee cinque (five) !!
Guess we'll have the subforum as soon as this one's about hundreded :roll:
fermin said:
Guess we'll have the subforum as soon as this one's about hundreded :roll:
Click to expand...
Click to collapse
sixthed
I agree a Hermes section is essential.
Yes! we NEED a Hermes Forum
I have just ordered my XDA Trion and I think it is time to have a Forum.
BTW: Can I use the CABs from my Wizards ExtRom (VPAcII) for the Trion? Or is it even possible to use a backup from the Wizard?
Life would be very easy then. (just got everything the way I want it to be)
Cheers
Yes! we NEED a Hermes Forum
I have just ordered my XDA Trion and I think it is time to have a Forum.
BTW: Can I use the CABs from my Wizards ExtRom (VPAcII) for the Trion? Or is it even possible to use a backup from the Wizard?
Life would be very easy then. (just got everything the way I want it to be)
Cheers
why does it take so long to open a new forum? Are there any moderators about?
penyekz said:
why does it take so long to open a new forum? Are there any moderators about?
Click to expand...
Click to collapse
Right!!!!
For the moment, for who is interested, I have a group on the HTC TYTN based pda phone:
http://groups.yahoo.com/group/TYTN
to join:
http://groups.yahoo.com/group/TYTN/join
trendystyle said:
For the moment, for who is interested, I have a group on the HTC TYTN based pda phone:
Click to expand...
Click to collapse
Now that's just downright rude :evil:
kevino said:
trendystyle said:
For the moment, for who is interested, I have a group on the HTC TYTN based pda phone:
Click to expand...
Click to collapse
Now that's just downright rude :evil:
Click to expand...
Click to collapse
Why?
I said who want, if you don't like, you don't have too!
A kind of touchy? :wink:
ghl10000 said:
Hi there,
I'll hopefully get my HTC TyTN delivered end of this week.
Upfront a few, but essential questions (sorry if misposted here but there isn't yet something like a HTC Hermes group):
1. Green Home Screen
Some of you like it, I was a bit shocked. Also I'm of the opinion that the contrast is better with the traditional blue colored Home Screen.
Has anyone of you any idea on how to switch back to the traditional blue colored homescreen ?
Would that be an easy task or require modification of the firmware ?
2. HSDPA/EDGE Hack
As far as I know the TyTN also supports EDGE. Btw: can anyone confirm this ?
While the EDGE Tweak works perfectly on my MS Smartphone (Qtek 8300), will it also work on the TyTN ?
Is there also a HSDPA Tweak, thus enabling e.g. a "H" instead of an "U" ?
3. PDF User Manual
Does anyone know where it can be downloaded from ?
Is it on the CD delivered with the device ?
If so would anyone be so kind as to upload it to the ftp ?
4. Customized Case for the TyTN
The case for the Wizard should fairly fit, though maybe not perfectly.
If you compare the dimension of the Wizard and the TyTN in particular the lengths are different by some 4mm, which could make the case not fit so well.
Has anyone already seen a customized case specially designed for the TyTN ?
Is there one delivered within the box ? If so does it fit well and look cute ?
5. HTC Hermes Forum
I herewith kindly ask the moderators to open up a dedicated HTC Hermes Forum in order to have the increasing number of postings related to that new type of device posted (and picked) there !
Relying on profound community feedback.
Thanks so much.
Click to expand...
Click to collapse
If somebody is looking for the manual in italian language, here is the link to download it:
http://www.solopalmari.com/images/stories/recensionihw/htc_tytn/TyTNmanualeusoITA.pdf
Hi Guys,
thanks for watching. DUe to some good roms of you i upgraded yesterday my qtek s200 to wm6. Now the i love the Gui of the TouchFlo 3D. How could i download and install it on my running device.
Du i need this hdsql (or whatever).
Yess i saw many rom here in the forum but none was like touchflo 3d espacially for the messaging keyboard. I want to get rid of my stylus pen. And i think this would be a good possibility.
Thanks in advance.
Cheers,
RonLion
it's can not work on prophet
Cos' ram is less
ah, ok.
But wm 6.1 prof is possible? do you know a good rom in english.
thanks. cheers,
Ronny
The forum is full of good 6.1 roms. Suggest u spend a little time reading then when u understand what u have to do, go and try some ROMS for yourself and learn
Hi
I hope experienced forum member will not be offended by my response to timmymarsh
timmymarsh recommends:
"spend a little time reading then when u understand what u have to do, go and try some ROMS for yourself and learn"
I am a noob with xda, I have spent hours reading, and trying to learn. I am still not clear how to safely update my orbit 1 to wm6.1 with touchflo.
For the non experienced (with xda) this forum is very difficult to find information.
Virtually every post / tutorial uses technical terms which presume previoius knowledge of htc / xda firmware and upgrades.
I am not IT incompetent.
There are a number of iPhone forums which have very straightforward forums which guide the reasonably competent computer user to unlock iphone, upgrade firmware and software.
Is there a straightforward tutorial available in xda-developers to help me upgrade to wm6.1 with touchflo?
Thanks colink
colink said:
Hi
For the non experienced (with xda) this forum is very difficult to find information.
...
Is there a straightforward tutorial available in xda-developers to help me upgrade to wm6.1 with touchflo?
Thanks colink
Click to expand...
Click to collapse
Firts, I would like to ensure you that I am not flaming or anything like that.
But, I have to Agree with Colink, this is not a noobfriendly forum
I´ve just bought a S200 from a friend (I´ve been dreaming with it since 2006!) and was a very pleasent surprise to know that Prophet could run WM 6.1 (I like Touchflo 3d, but for me, is not necessary.)
So, just as Colink (I supose), I´ve spent the last week reading this forum...and XDA forum too. I´m very sure that everything i should (or even can) know about prophet, is here. There is no other place to search...
But, the volume of knowledge is so huge, that sometimes is even confuse to absorb it.
So, I agree with colink and ask, Is there any tutorial to upgrade my WM version?
I´m pretty sure that I´ll upgrade it with or without tutorial... but as since as theres so many "expert" around here and, they did so much to the whole forum... wouldn´t be hard to someone write a quick tutorial.
But, I hope you all understand, that what I´m doing here, and I supose colink too, is just searching at the best (probably) only place to find anything about our ppc... not been lazy, we are just afraid of screwing something.
Thanks!
Magliano
colink said:
Hi
I hope experienced forum member will not be offended by my response to timmymarsh
timmymarsh recommends:
"spend a little time reading then when u understand what u have to do, go and try some ROMS for yourself and learn"
I am a noob with xda, I have spent hours reading, and trying to learn. I am still not clear how to safely update my orbit 1 to wm6.1 with touchflo.
For the non experienced (with xda) this forum is very difficult to find information.
Virtually every post / tutorial uses technical terms which presume previoius knowledge of htc / xda firmware and upgrades.
I am not IT incompetent.
There are a number of iPhone forums which have very straightforward forums which guide the reasonably competent computer user to unlock iphone, upgrade firmware and software.
Is there a straightforward tutorial available in xda-developers to help me upgrade to wm6.1 with touchflo?
Thanks colink
Click to expand...
Click to collapse
Colink, in response to your comments above you would have read the very good guides to upgrading such as these:
http://forum.xda-developers.com/showthread.php?t=405384 and http://forum.xda-developers.com/showthread.php?t=401326 and http://forum.xda-developers.com/showthread.php?t=353547.
When i did my first flash i started with this : http://forum.xda-developers.com/showthread.php?t=315016. I then Hardspl using the guides above. The info i read recomended this way, so i used it. You will also have read from the guides about using XP not Vista to flash and also ensuring you remove all devices from USB ports and turning off other comunication s/w. The guides also offer good info on what to do when it goes wrong. If you do flash 6.1 rom and it goes wrong, then you can revert back to 315016 thread (aku 2.2 rom) as the guides say, this wil get you device working again
This post gives you links to the guides and a list of Roms, although you should check for new ones also : http://forum.xda-developers.com/showthread.php?t=377545
The wiki is also useful : http://wiki.xda-developers.com/index.php?pagename=Prophet_Contributed_ROMs
Now i hope this is both useful to yourself and d.magliano. I know that too much info is always a head wrecker, but really the guides are very good.
Hi Timmymarsh
Thanks for the response and the guidance. I am currently reading through the links you gave.
Unfortunately in my haste, before reading your post I followed instructions for installing USPL.
I have just run start_uspl.exe on my orbit 1, after following instructions re- soft reset.
Phone is showing white screen asdescribed in tutorial
PDA ROM update utility has opened on xp laptop.
Instructed to conect via active sync.
Active sync cannot find device.
I have not touched phone and do not want to brick it.
Any guidance would be appreciated.
The phone is currently connected to the charger with white screen. I presume I will have to restart and hope for the best.
Secondly the first link you give in your reply is for 'Prophet' - do I need different instructions / aplications for Artemis / Orbit?
Thanks Colin
i'll try to help yoy
colink said:
Hi
I hope experienced forum member will not be offended by my response to timmymarsh
timmymarsh recommends:
"spend a little time reading then when u understand what u have to do, go and try some ROMS for yourself and learn"
I am a noob with xda, I have spent hours reading, and trying to learn. I am still not clear how to safely update my orbit 1 to wm6.1 with touchflo.
For the non experienced (with xda) this forum is very difficult to find information.
Virtually every post / tutorial uses technical terms which presume previoius knowledge of htc / xda firmware and upgrades.
I am not IT incompetent.
There are a number of iPhone forums which have very straightforward forums which guide the reasonably competent computer user to unlock iphone, upgrade firmware and software.
Is there a straightforward tutorial available in xda-developers to help me upgrade to wm6.1 with touchflo?
Thanks colink
Click to expand...
Click to collapse
(i'm sorry for my bad english), try this tutorial , it was good for me http://forum.pocketpcitalia.com/forum_posts.asp?TID=30766&PN=1
bye
colink said:
Secondly the first link you give in your reply is for 'Prophet' - do I need different instructions / aplications for Artemis / Orbit?
Thanks Colin
Click to expand...
Click to collapse
Colin, im not familiar with o2 branded stuff so excuse ignorance, but is the orbit not based on the touch cruise/polaris?
hi
Sorry my fault, I believe the orbit is same as artemis p3300 & touch cruise. I thought I was posting in Artemis forum.
I presume your links are not relevant to my phot?
If you can guide me about my current White screen / no connection problem I would appreciate it.
Thanks colink
colink said:
hi
Sorry my fault, I believe the orbit is same as artemis p3300 & touch cruise. I thought I was posting in Artemis forum.
I presume your links are not relevant to my phot?
If you can guide me about my current White screen / no connection problem I would appreciate it.
Thanks colink
Click to expand...
Click to collapse
Colink, i thought it was touch cruise hardware and ****, thats not good!! You are correct in thinking that you cannot use the prophet section in flashing. If i were you, id goto the polaris section and read how to recover. HardSPL and flashing is more complex for the Polaris, i am waiting for official wm6.1 rom before i try any cooked ones on there. If you are lucky you can recover your device by removing the battery for at least 30 seconds and try and restart, but i do fear you may have bricked your device as the SPL is one of two parts that help load you OS (apols if my descriptions are basic, i dont want to confuse)
Read the Polaris section and look for help, if not ask, but you may get rude reply. Sorry i cant help more, as i have not tried on my touch cruise yet. Let me know what happens, pm me if you want
hi timmymarsh
Thanks for your guidance. The Polaris is the orbit 2. My orbit1 is the Artemis. Not sure if it has same complexeties as Polaris.
I will follow your guidance and let you know.
Colink
Colink,
Ignore my pm and goto here, i hope it helps (ps make sure you post in the right place in future and if u ask for help, make it clear your device and steps taken and donot criticise those who try to help, unlike some who post)
pm me and tell me how it goes!
http://forum.xda-developers.com/showthread.php?t=308242
Yes TouchFlo 3D works on S200
Have a look there !!
http://www.youtube.com/watch?v=DWaGDTvwmmc&feature=related
TouchFlow for P3400
Anyone having TouchFlow 3D for HTC P3400
Touchflo 3D on Asus P750
Whether TouchFlo 3D will work on Asus P750 ?
Bobyciline said:
Have a look there !!
http://www.youtube.com/watch?v=DWaGDTvwmmc&feature=related
Click to expand...
Click to collapse
Dude, this is not touchflo3D!! google it and you'll see. that is basic touchflo with htc cube and htc home.
sriyankar said:
Anyone having TouchFlow 3D for HTC P3400
Click to expand...
Click to collapse
Erm which forum are you in?
micrographics said:
Whether TouchFlo 3D will work on Asus P750 ?
Click to expand...
Click to collapse
wtf, this is prophet forum?
Hello!
I have found some interesting threads in the section for the Tornado:
http://forum.xda-developers.com/showthread.php?t=455224
http://forum.xda-developers.com/showthread.php?t=455950
An so a was asking myself, if there where any plans to port WM6.1 Pro to the Vox as well. Is there any developer out there, who can tell me, if this is possible and makes sense!?
Greetings
Markus
edit: Sorry! Have seen, that there has been a discussion about this topic in spring for th Vox. Is there any development as for other devices like StarTrek or Tornado?
Simple answer: no!
http://www.engadget.com/2009/01/22/htc-debuts-new-touch-cruise-phone-with-footprints-geotagging/
anyone willing to dump this?
regards
4irm
They're a month late:
http://forum.xda-developers.com/showthread.php?t=464366
Is there a port of the original qvga version somewhere. I couldn't find one in a search.
Looking forward to get this on my TPro..
they are not late because udk has never released his rom since last year. he promised he would but i guess development has stopped. he comented or mentioned anything
4irm said:
anyone willing to dump this?
Click to expand...
Click to collapse
Judging on the thread title I thought you already had...
You would agree this goes in the Polaris section rather than here, wouldn't you?
moved
I think this is very relevant here. It is a new version of M2D that I think a lot of people would be interested in and would get lost in another forum. Also it is a new version of the touch cruise not the same as the Polaris.
pjsockett said:
I think this is very relevant here. It is a new version of M2D that I think a lot of people would be interested in and would get lost in another forum. Also it is a new version of the touch cruise not the same as the Polaris.
Click to expand...
Click to collapse
Seconded. This has nothing to do with the Polaris.
Hello,
I'm new here, and I have a lot of questions.
I have a Sony Ericsson K810i right now, and I want to buy the HP iPaQ 614C.
I have downloaded the Windows Mobile 6.1 emulator images. It looks good. But now my questions.
I'm a music freak, and I love SRS WoW. Only, it seems to have a lot of trouble with WM 6.1 . And there seems to be a newer version, with a lot of effects removed. Is this the same with WM 6.0?
That's directly question 2. I have downloaded the Dutch HP Ipaq 614c image and it is a .DIO file. Any way to mount it in the Device emulator?
My fourth question. If SRS WoW is possible on WM6.1, can someone develope a Dutch WM6.1 ROM for the Ipaq 614C? It's not nessacary, but it can be nice
And now my fifth question. I think the answer is "no"... Is there any way to put a stripped WM standard version on my SE K810i, till I have the new phone?
I am still a English student, so please don't shoot me...
Thanks in Advance,
Sef
One other question:
When WM6.5 comes out, is MS gonn'a release a update for all WM6/6.1 Devices?
have you tried posting in the right section?
jayjay8585 said:
have you tried posting in the right section?
Click to expand...
Click to collapse
Excuse me, I'm new here... Can a admin put it in the right section for me?
no it should have been done by you. read the rules theres a question and answers forum for stuff like this
I moved to the correct section, from now on please post Questions in the right section (it helps you get your answer faster and us keep the site orginised)
SRS Wow HD
Try this. Should work.
Cheers
andrew-in-woking
Thank you. One problem fixed, 4 to go...
is there anyway 6to help with the other four problem
(by the way apologies for sounding sharp in the second post. i was having an off day, and since this is a HTC forum you may have issues getting results feel free to post on my forum below)
ahh jayjay, such a cute baby
what my avatar