Has anyine managed to do a ROM like the new HTC Touch PDA? Would this work on my XDA Exec? Or can someone help me put the iphone theme on my XDA.
Thanks
Come on, at least look on the same page before you ask questions. The same thin's being asked further down.
Basic answer is tough luck for now, nobody has made VGA versions of either.
user989 said:
Has anyine managed to do a ROM like the new HTC Touch PDA? Would this work on my XDA Exec? Or can someone help me put the iphone theme on my XDA.
Thanks
Click to expand...
Click to collapse
following side for your info. it is not original touch application but it look very similar, check it out.
http://rotlaus-software.de/forum/viewtopic.php?id=519
Thanks alot bulldog.
AJ Im very new to this forum so please excuse me, if someone else has posted the same question. It would be nice if u were to keep you comments civil.
Oh I'm so sorry, I had no idea being new somewhere means you are unable to read the other questions posted on the very same page.
I'll bear this in mind from now on.
Thanks to enlightening me to this terrible affliction that must strike users with less than several days, or posts on their profile.
now now ladies, back to your corners.
Hi Guys,
thanks for watching. DUe to some good roms of you i upgraded yesterday my qtek s200 to wm6. Now the i love the Gui of the TouchFlo 3D. How could i download and install it on my running device.
Du i need this hdsql (or whatever).
Yess i saw many rom here in the forum but none was like touchflo 3d espacially for the messaging keyboard. I want to get rid of my stylus pen. And i think this would be a good possibility.
Thanks in advance.
Cheers,
RonLion
it's can not work on prophet
Cos' ram is less
ah, ok.
But wm 6.1 prof is possible? do you know a good rom in english.
thanks. cheers,
Ronny
The forum is full of good 6.1 roms. Suggest u spend a little time reading then when u understand what u have to do, go and try some ROMS for yourself and learn
Hi
I hope experienced forum member will not be offended by my response to timmymarsh
timmymarsh recommends:
"spend a little time reading then when u understand what u have to do, go and try some ROMS for yourself and learn"
I am a noob with xda, I have spent hours reading, and trying to learn. I am still not clear how to safely update my orbit 1 to wm6.1 with touchflo.
For the non experienced (with xda) this forum is very difficult to find information.
Virtually every post / tutorial uses technical terms which presume previoius knowledge of htc / xda firmware and upgrades.
I am not IT incompetent.
There are a number of iPhone forums which have very straightforward forums which guide the reasonably competent computer user to unlock iphone, upgrade firmware and software.
Is there a straightforward tutorial available in xda-developers to help me upgrade to wm6.1 with touchflo?
Thanks colink
colink said:
Hi
For the non experienced (with xda) this forum is very difficult to find information.
...
Is there a straightforward tutorial available in xda-developers to help me upgrade to wm6.1 with touchflo?
Thanks colink
Click to expand...
Click to collapse
Firts, I would like to ensure you that I am not flaming or anything like that.
But, I have to Agree with Colink, this is not a noobfriendly forum
I´ve just bought a S200 from a friend (I´ve been dreaming with it since 2006!) and was a very pleasent surprise to know that Prophet could run WM 6.1 (I like Touchflo 3d, but for me, is not necessary.)
So, just as Colink (I supose), I´ve spent the last week reading this forum...and XDA forum too. I´m very sure that everything i should (or even can) know about prophet, is here. There is no other place to search...
But, the volume of knowledge is so huge, that sometimes is even confuse to absorb it.
So, I agree with colink and ask, Is there any tutorial to upgrade my WM version?
I´m pretty sure that I´ll upgrade it with or without tutorial... but as since as theres so many "expert" around here and, they did so much to the whole forum... wouldn´t be hard to someone write a quick tutorial.
But, I hope you all understand, that what I´m doing here, and I supose colink too, is just searching at the best (probably) only place to find anything about our ppc... not been lazy, we are just afraid of screwing something.
Thanks!
Magliano
colink said:
Hi
I hope experienced forum member will not be offended by my response to timmymarsh
timmymarsh recommends:
"spend a little time reading then when u understand what u have to do, go and try some ROMS for yourself and learn"
I am a noob with xda, I have spent hours reading, and trying to learn. I am still not clear how to safely update my orbit 1 to wm6.1 with touchflo.
For the non experienced (with xda) this forum is very difficult to find information.
Virtually every post / tutorial uses technical terms which presume previoius knowledge of htc / xda firmware and upgrades.
I am not IT incompetent.
There are a number of iPhone forums which have very straightforward forums which guide the reasonably competent computer user to unlock iphone, upgrade firmware and software.
Is there a straightforward tutorial available in xda-developers to help me upgrade to wm6.1 with touchflo?
Thanks colink
Click to expand...
Click to collapse
Colink, in response to your comments above you would have read the very good guides to upgrading such as these:
http://forum.xda-developers.com/showthread.php?t=405384 and http://forum.xda-developers.com/showthread.php?t=401326 and http://forum.xda-developers.com/showthread.php?t=353547.
When i did my first flash i started with this : http://forum.xda-developers.com/showthread.php?t=315016. I then Hardspl using the guides above. The info i read recomended this way, so i used it. You will also have read from the guides about using XP not Vista to flash and also ensuring you remove all devices from USB ports and turning off other comunication s/w. The guides also offer good info on what to do when it goes wrong. If you do flash 6.1 rom and it goes wrong, then you can revert back to 315016 thread (aku 2.2 rom) as the guides say, this wil get you device working again
This post gives you links to the guides and a list of Roms, although you should check for new ones also : http://forum.xda-developers.com/showthread.php?t=377545
The wiki is also useful : http://wiki.xda-developers.com/index.php?pagename=Prophet_Contributed_ROMs
Now i hope this is both useful to yourself and d.magliano. I know that too much info is always a head wrecker, but really the guides are very good.
Hi Timmymarsh
Thanks for the response and the guidance. I am currently reading through the links you gave.
Unfortunately in my haste, before reading your post I followed instructions for installing USPL.
I have just run start_uspl.exe on my orbit 1, after following instructions re- soft reset.
Phone is showing white screen asdescribed in tutorial
PDA ROM update utility has opened on xp laptop.
Instructed to conect via active sync.
Active sync cannot find device.
I have not touched phone and do not want to brick it.
Any guidance would be appreciated.
The phone is currently connected to the charger with white screen. I presume I will have to restart and hope for the best.
Secondly the first link you give in your reply is for 'Prophet' - do I need different instructions / aplications for Artemis / Orbit?
Thanks Colin
i'll try to help yoy
colink said:
Hi
I hope experienced forum member will not be offended by my response to timmymarsh
timmymarsh recommends:
"spend a little time reading then when u understand what u have to do, go and try some ROMS for yourself and learn"
I am a noob with xda, I have spent hours reading, and trying to learn. I am still not clear how to safely update my orbit 1 to wm6.1 with touchflo.
For the non experienced (with xda) this forum is very difficult to find information.
Virtually every post / tutorial uses technical terms which presume previoius knowledge of htc / xda firmware and upgrades.
I am not IT incompetent.
There are a number of iPhone forums which have very straightforward forums which guide the reasonably competent computer user to unlock iphone, upgrade firmware and software.
Is there a straightforward tutorial available in xda-developers to help me upgrade to wm6.1 with touchflo?
Thanks colink
Click to expand...
Click to collapse
(i'm sorry for my bad english), try this tutorial , it was good for me http://forum.pocketpcitalia.com/forum_posts.asp?TID=30766&PN=1
bye
colink said:
Secondly the first link you give in your reply is for 'Prophet' - do I need different instructions / aplications for Artemis / Orbit?
Thanks Colin
Click to expand...
Click to collapse
Colin, im not familiar with o2 branded stuff so excuse ignorance, but is the orbit not based on the touch cruise/polaris?
hi
Sorry my fault, I believe the orbit is same as artemis p3300 & touch cruise. I thought I was posting in Artemis forum.
I presume your links are not relevant to my phot?
If you can guide me about my current White screen / no connection problem I would appreciate it.
Thanks colink
colink said:
hi
Sorry my fault, I believe the orbit is same as artemis p3300 & touch cruise. I thought I was posting in Artemis forum.
I presume your links are not relevant to my phot?
If you can guide me about my current White screen / no connection problem I would appreciate it.
Thanks colink
Click to expand...
Click to collapse
Colink, i thought it was touch cruise hardware and ****, thats not good!! You are correct in thinking that you cannot use the prophet section in flashing. If i were you, id goto the polaris section and read how to recover. HardSPL and flashing is more complex for the Polaris, i am waiting for official wm6.1 rom before i try any cooked ones on there. If you are lucky you can recover your device by removing the battery for at least 30 seconds and try and restart, but i do fear you may have bricked your device as the SPL is one of two parts that help load you OS (apols if my descriptions are basic, i dont want to confuse)
Read the Polaris section and look for help, if not ask, but you may get rude reply. Sorry i cant help more, as i have not tried on my touch cruise yet. Let me know what happens, pm me if you want
hi timmymarsh
Thanks for your guidance. The Polaris is the orbit 2. My orbit1 is the Artemis. Not sure if it has same complexeties as Polaris.
I will follow your guidance and let you know.
Colink
Colink,
Ignore my pm and goto here, i hope it helps (ps make sure you post in the right place in future and if u ask for help, make it clear your device and steps taken and donot criticise those who try to help, unlike some who post)
pm me and tell me how it goes!
http://forum.xda-developers.com/showthread.php?t=308242
Yes TouchFlo 3D works on S200
Have a look there !!
http://www.youtube.com/watch?v=DWaGDTvwmmc&feature=related
TouchFlow for P3400
Anyone having TouchFlow 3D for HTC P3400
Touchflo 3D on Asus P750
Whether TouchFlo 3D will work on Asus P750 ?
Bobyciline said:
Have a look there !!
http://www.youtube.com/watch?v=DWaGDTvwmmc&feature=related
Click to expand...
Click to collapse
Dude, this is not touchflo3D!! google it and you'll see. that is basic touchflo with htc cube and htc home.
sriyankar said:
Anyone having TouchFlow 3D for HTC P3400
Click to expand...
Click to collapse
Erm which forum are you in?
micrographics said:
Whether TouchFlo 3D will work on Asus P750 ?
Click to expand...
Click to collapse
wtf, this is prophet forum?
Hello to everyone, sorry in advance if i am posting this in the wrong section. I have a Orange spv m2000, which is open to all networks, and as you all know it runs windows mobile 2003?. My question is , can it be upgraded to say windows 5,6 or higher if there is one, and what is the process to do this, would it be a simple case of down loading a cab file or is it more complicated than that. I'm not that good with these devices, so all instructions would be welcome. Many thanks.
sonny1 said:
Hello to everyone, sorry in advance if i am posting this in the wrong section. I have a Orange spv m2000, which is open to all networks, and as you all know it runs windows mobile 2003?. My question is , can it be upgraded to say windows 5,6 or higher if there is one, and what is the process to do this, would it be a simple case of down loading a cab file or is it more complicated than that. I'm not that good with these devices, so all instructions would be welcome. Many thanks.
Click to expand...
Click to collapse
Your device is the Blue Angel
You can upgrade to 6.1 or even 6.5
here how to:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel
Then enter to the proper section and choose the best ROM that fits your personal needs
Good luck,
Thanks Orb3000 for the response, thats great, i'll take a look and follow it, if i get stuck may i come back to you.
Radio Rom
Hi
I have read the section on upgrading the rom. I think i have it right, but to check with you guys. I can keep my OS which is wm 2003, and i can just upgrade the radio rom, which will give me things like 3g, gsm,gprs, wifi, but quicker version than i have currently, will it alter my current settings for my current phone provider (o2) which i set up recently. Sorry if my questions are basic, but being new, and learning my way through this, asking questions is the only way i know of moving forward, and advancing my knowledge.
Hello everyone =)
First im really sorry if this question was already asked, but i read the wiki and i cannot find an answer :/
It is possible to upgrade my dopod from wm 6.1 to 6.5? and if its possible where i can find it? i lost many hours to find, but nothing.
And my last question, do you all know which prog i can use to convert my video to my dopod?
thank you for everyone who can help me
Welcome aboard,
Have a deep read here to learn how to flash:
http://wiki.xda-developers.com/index.php?pagename=Uni_ROM_Upgrade
Then enter to Universal mobile 6 section and select your 6.5 ROM
Good luck,
p.s: You have one of the best HTC devices ever!
well you dont have to be sorry at all
look at the post above for the 1st Q
for videos you can use TCPMP it plays all the common formats
so you dont have to convert
http://www.freewarepocketpc.net/ppc-download-tcpmp-v0-72rc1.html
good luck
Thank you so much mr sheennick and mr orb3000 =) i will check right now, have a good night ^____________^
Heloo everyone. I just registered here at these forums because I have just got a gift from a friend. I got a brand new HTC Touch Pro that is made for Sprint. It doesnt have a sim-card which is another thing that I would like to discuss, but for now, I would like to get some help on upgrading my OS to something else. It has windows 6.1 I believe, or 6.0, I am not sure, but its not very stable.
I would like to know if any one can give me the most simple way to update to windows 6.5 or any other OS you might think is better than windows mobile 6 or 6.1.
I already read about roms, and downloading them, but all i get is links to other websites and the files that I am supposed to download are confusing me because they said its for the touch diamond, but i have a touch pro.
If any one can help me with this issue I would greatly appreciate it.
I apologize in advance for my noobiness and I appreciate any help in advnace.
Thank you and happy new year all.
Welcome
You have a CDMA Raphael
All info needed is here http://forum.xda-developers.com/showthread.php?t=508084
Please read, read and read again
Happy New Year.
Welcome to XDA & enjoy your stay (read & search & flash)