Database Info

Polaris + Mug of Coffee = ?

Mrs dropped my Orbit 2 into a cup of coffee...pulled it out quickly ..took out the battery etc...shook it for while ....let it dry out for the day...everything works fine ..surprisingly...buttons a bit clunky.
I thought the caffeine would have solved the video driver issue too !!! ...but no such luck.

pistonripper said:
Mrs dropped my Orbit 2 into a cup of coffee...
Click to expand...
Click to collapse
Do you want a link to some divorce lawyers?

sugar is the worst killer
so cola is worse then coffee without sugar

pistonripper said:
I thought the caffeine would have solved the video driver issue too !!! ...but no such luck.
Click to expand...
Click to collapse
ROFLMFAO...

pistonripper said:
Mrs dropped my Orbit 2 into a cup of coffee...pulled it out quickly ..took out the battery etc...shook it for while ....let it dry out for the day...everything works fine ..surprisingly...buttons a bit clunky.
I thought the caffeine would have solved the video driver issue too !!! ...but no such luck.
Click to expand...
Click to collapse
Perhaps it was decaffeinated coffee ? Next time try with Nespresso, Polaris works like a charm then
Rgds,

u guys are funny as hell. i put my touch next to espresso everyday and it still sucks on video. i manage a starbucks just so u know

if u put it next to it, it won't absorb any caffine

pistonripper said:
...everything works fine ..surprisingly...buttons a bit clunky.
Click to expand...
Click to collapse
Keep us informed in this thread, m8. I don't want to scare you , but it
may getting worse in a few days due to oxidation and if there was sugar
in the coffee, maybe the HW keys could also stuck.
Olioaglio

Will keep you posted if any anything extraordinary starts to happen to my caffeine drugged device!!
Thanks for the lawyer advice...because it was only half dipped..I will pass on it for now.

hehe ...
sorry but this post made me laugh.

maybe the device is caffeine compatible?

my son put his old nokia through the washing machine by accident - twice! And it still worked!

My mother washed her SE k750... and it died...

May I present...
Dry out your soaked gadgets in rice

Olioaglio said:
Keep us informed in this thread, m8. I don't want to scare you , but it
may getting worse in a few days due to oxidation and if there was sugar
in the coffee, maybe the HW keys could also stuck.
Olioaglio
Click to expand...
Click to collapse
You're right...today my call button stopped working...cannot bring up the dialpad the normal way..have to goto start > phone.
Bit of a wasted cup of coffee ...lucky it wasn't a cup of Kopi Luwak!
But seriously, any solutions to this ?

Important
Question : was it with or without the screen protector ?
This little sheet is so nice rotfl ....

I spilt coffee on my kaiser today, battery out - leave it to dry... All appeared well until I discovered touch screen doesn't work.

rone said:
I spilt coffee on my kaiser today, battery out - leave it to dry... All appeared well until I discovered touch screen doesn't work.
Click to expand...
Click to collapse
Let it dry a bit longer, take out the stylus and keep shaking it (like a very quick vibrating motions) on to tissue paper...make sure as much coffee as possible has been shaken out. My call button has started working now.....

Great thanks, it's the touch screen's just come back. Ta.

Solution for Unresponsive Joysticks: WD-40

I'm guessing others have suffered from annoying, unresponsive joystick problems as much as I have. I read elsewhere online about using a drop of WD-40 lubricant on the joystick to solve the problem. I just wanted to let others here know that I tried this, and while at first it seemed like it didn't help or perhaps even made the problem worse, I've noticed that now my joystick responds *perfectly* - perhaps even better than when I first got it (I bought mine used).
I used these instructions to disassemble my SDA. I used the T6 Torx screwdriver included in this kit found at Dealextreme.com for US$2.65 with free international shipping.
Remove the plastic top from the joystick mechanism and let one drop of WD-40 soak into it. Move the joystick around (as if navigating on your phone) for about a minute to spread the WD-40 around.
Again, my experience was that at first it seemed to make it worse, but after the first day it got better and better. It's now gone one month without any problems.
Update: 8 months later and my joystick is still working perfectly, without any additional lubrication. I definitely recommend this process, though as usual with anything like this, attempt it at your own risk.

Hi,
KONTAKT working too

I didn't even take my spv c600 apart.
Just took the battery out.
Sprayed WD40 around the joystick and wiggled it about for a couple of mins ...
Then left it to dry.
Result = Perfect Joystick

Hey, my left softkey is not so responsive.
What could be the remedy? Mind showing the contacts between the keypad and the circuit board?

Thanks for the tip! I was hoping I wasn't going to have to take my phone apart though.

Cool, thank you! I had the same problem, and already bought and installed another keyboard - and got the joystick problem back after few months. Now I just sprayed WD40 around the joystick, wiggled it for a while, and it works like new! ) THANKS!

Just a warning: if you do this without disassembling the phone be very careful to only do ONE or TWO drops and sparingly. Although I thought I only did a couple, I now have a nice discolored "blob" going up through my lcd, not that it doesnt personalize it a bit, but not quite what I was going for

I just used to take a drop of alcohol on a little piece of paper tissue, with a toothpick carefully cleaning the base of the joystick around. This has always helped for 2-3 months.

Well, I always used deodorant spray when my joystick was not responsive (with phone closed, tilt the joystick both up & down and then spray, just a bit - no need to disassemble the phone). No problem, no stress.

I cleaned my joy in the same way. (disassembling cover + WD-40)
This is perfect way. I did that a 2-3 month ago and joy is still working perfectly.
I made the same with my old Motorola's and their joyisticks are working perfectly for about year now
Ps. WD-40 need some time to start working. Next day after cleaning everything should work very nice
Ps2. I don't recommend spraying WD-40 on non uncovered joystick. The best (and the safest) way is to spray only joy. I had to change microphone in my moto becouse of that ;P

thanks for sharing this. ill be doing it tonight!

white lithium grease in the spray can also works really well. Just take one small drop on a toothpick and pull joystick down and drop it in there.Its an easy alternative to having to take the phone apart. I did this last October and it still works great.

funny.. just seconds before i found this topic.. i put 2 drops of contactspray in the joystick. for so far it doesn't helps much..
so i am not the only one with these problems

sticky?
Mods: I'd like to suggest this thread be made a sticky.

WD-40 need some time to start working. Next day after cleaning everything should work very nice ！

I dropped my phone on concrete floor from about 4 ft high and it bounce up and bounce. luckily it is still working with some problem with power switch and few loose casing (I glued it with super glue).
To fix the unresponsive joystick I tried to open following the instructions but the screw near the power switch is not able to remove, seems something broken inside after that drop, and I could not completely open it. So, tried to put few drops of spirit on the joystick but I actually pour some. After that I thought joystick is responsive more but later it remains same. Yesterday only I found out my keypad backlight is not glowing in the dark. I don't know when the problem started, after that drop, after that spirit, or after some setting change (I flashed Kamadaze's Pro RC7).
Sorry for long story.. but someone help me .. my joystick & key backlight.
Thanks in advance.

I will try doing with some organic solvent, but first I will have to wait for my joystick to malfunction (I always use nineway keypad to keep my joystick safe though )
What is the exact name and company of WD-40. Can any one tell me its composition coz i have many chemical lab retailers around in my neighbouring city

dark_prince said:
I will try doing with some organic solvent, but first I will have to wait for my joystick to malfunction (I always use nineway keypad to keep my joystick safe though )
What is the exact name and company of WD-40. Can any one tell me its composition coz i have many chemical lab retailers around in my neighbouring city
Click to expand...
Click to collapse
http://www.wd40.com/

baron22 said:
http://www.wd40.com/
Click to expand...
Click to collapse
ohh thanx lol, I saw that, butt I wonder whether it is available in Pakistan or not

dark_prince said:
ohh thanx lol, I saw that, butt I wonder whether it is available in Pakistan or not
Click to expand...
Click to collapse
I would have thought a generic "maintenance spray" would do the trick.

[Q] front buttons don't work - advice?

So I bought a second hand MT4GS today, but the buttons on the face of the phone don't work - it came rooted, s-off, with some buggy ICS Rom installed. I just installed Bulletproof in the hopes that it was just the other rom causing the issue, but the buttons (home, menu, back, genius) are still non responsive. The corresponding buttons on the qwerty slider work fine.
Any ideas or suggestions? Would it help to try flashing a zip to map those front buttons? Since they don't work in 2 roms, is it something physicial?
I would appreciate any advice you could give me, whether its a certain way to try and remap the keys to force them to work, or a rom that might fix it, or maybe a kernel that would be most compatible with a quick, stable rom with full camera features? I really don't care about being on the bleeding edge or having ICS, I just want a stable, every day use rom.
Thanks much!

Almost certainly physical. The flex cable inside has 5 dangly little fingers that go down in that area for the 4 buttons and the track pad. Very easy for that to get gummed up, and not an easy thing to fix (because this phone is kind of a pain to take apart). Still, you can find some videos on YouTube that show how to disassemble the phone. You can try it. Put it back together carefully enough, and those buttons might start working again. (If you're unlucky, you might need a new flex cable.)

OK, do I need anything besides standard precision torx to open this phone up? I haven't really peeked inside, since we only got it a couple hours ago.
Also, I noticed that the home button on the physical keyboard sometimes takes me home, and sometimes selects things, depending on what I'm doing - talk about weird! Either way, it's still better than my ancient and fading G1 I've been stuck using the last couple days.
So if I open it up, do I just want to blast it with canned air, or is that a big no-no? Get a little soft brush and brush around the fingers? Tell it sweet nothings and tuck it in bed?
Edited to add:
Aaaand while I was busy typing and researching, my husband is cracking it open like a kid opening a Christmas present - wish him luck!

Bah humbug, just a note to let you know that we got to the 8 screws that hold the keyboard to the sliding part, and 2 of the phillips screws are stripped. So we're putting it back together until tomorrow night, when we will try to figure out how to get those 2 screws out.
But hey, at least we took it almost all the way apart, and got it back together, and it is working as well as it was before - if we didn't totally break it, then we're still ahead of the game!
So now I'm looking for advice on the following:
1) best way to clean out those button flex cables (air, small brush, ?)
2) ways to keep this phone clean inside - previous owner must have worked in a dust bunny factory, based on the dust I found inside the half of the phone we got disassembled. Then again, I live in a desert, it's to be expected?
3) super-stable rom/kernel combo that also gives me the camera app goodness that this phone deserves (And be honest, if I need stock to get the camera working, I'll go to stock).

rhondalicious said:
So now I'm looking for advice on the following:
1) best way to clean out those button flex cables (air, small brush, ?)
Click to expand...
Click to collapse
Compressed air or a small brush should work fine... If it is just a connectivity problem caused by dust or dirt or whatever.
rhondalicious said:
2) ways to keep this phone clean inside - previous owner must have worked in a dust bunny factory, based on the dust I found inside the half of the phone we got disassembled. Then again, I live in a desert, it's to be expected?
Click to expand...
Click to collapse
The only way to really keep it clean on the inside is to take it apart and use some compressed air or a small brush to get rid of all the dust... Doesn't matter where you are located you are gonna get dust inside of a phone that has no dust covers... You can see if they make any cases that have dust caps for the ports (I'm not sure if there are any for the MT4GS or not... haven't looked...)
rhondalicious said:
3) super-stable rom/kernel combo that also gives me the camera app goodness that this phone deserves (And be honest, if I need stock to get the camera working, I'll go to stock).
Click to expand...
Click to collapse
For the awesome sense camera I would recommend stock or if you want ICS then one of the Virtuous roms. Either Primmadonna (ICS+ Sense 4.0) or Inquisition (desensed with sense camera). I'm sure others have other opinions, but those are the only roms I have used... Well that and CM9 which is basically fully functional although it will never have the sense camera, but the AOSP camera isn't too bad. They are all super stable as well.

Those 8 little screws are easy to strip. They are only a couple of turns each, but if they don't budge ... well, I've got a broken phone just like that that I can't fix. If you figure out a way of drilling the out or whatever, I'd be interested to hear.
The dust in these phones is a well-known problem. In particular, dust can find it's way under the glass, and it's a complete teardown to clear that out.
Were the screws stripped when you got there, or did you do it? If someone had the phone apart before, it could be that the little flex cable fingers are just not in the right position. If that's the case, you just have to do it right. (Easier said than done since it's kind of tricky to work on it and keep everything positioned while you close it up.)

Those 2 screws were stripped when we opened it - we've tried a couple things and still haven't been able to get them out, but we haven't tried the trick of dabbing superglue on a screwdriver and letting it dry in the hole yet, and we haven't tried one of those screw extractors that is like an extra sharp screwdriver. We tried cutting a new slot with my dremel, but the cutting discs I have are too soft for the screw heads, we need a diamond cutting disc, I think. We also tried one of those drill chucks that has the 2 ends for reaming a new hole and unscrewing, but my husband is afraid to drill through the phone, and the chuck doesn't fit in my dremel.
I'm pretty sure whoever had the phone before me tried to fix it and gave up, that's why we were able to buy it off him for so cheap. I don't mind fiddling around with it, since the actual phone bit works just fine.
If I ever manage to get these stripped screws out, I'll let you know what works!

Those screws are definitely short in length, as you've seen from their companions, so I am also leery of drilling a millimeter too far.
Another thing I've contemplated is carving the plastic around the screw head so that the screw no longer holds anything in place. Haven't been bold enough to try it, though. I figure after that I would be able to get a grip on it with needlenose pliers and twist them out.
((My phone with the stuck screws is a water damaged phone that I bought used. [[Seller said "I don't know what happened to it", but, uh, it's a bit obvious once you look inside or even look at the sticker.]] Screen was flaky and I was going to take it apart and stare at it til I ran into those stuck (and rusty!) screws. Luckily, after a few days delay for head-scratching, the screen started working perfectly. I like to think of it as the Universe finally giving me a break.))

Would a cell phone repair place have better ways of getting those stripped screws out? My husband said I should find out what they would charge to open it up, but if I can't get the screws out, how would they do it?
And it's nice that your soggy-phone decided to start working for you, it's a pain dealing with wet phones, sometimes. My neighbor dropped hers in a big cup of soda once and I got to have futo leaning it out to help prevent sugar/corrosion issues. I only managed to keep it working for another 3 months, but by then she had already dropped it into a toilet.

rhondalicious said:
Would a cell phone repair place have better ways of getting those stripped screws out? My husband said I should find out what they would charge to open it up, but if I can't get the screws out, how would they do it?
And it's nice that your soggy-phone decided to start working for you, it's a pain dealing with wet phones, sometimes. My neighbor dropped hers in a big cup of soda once and I got to have futo leaning it out to help prevent sugar/corrosion issues. I only managed to keep it working for another 3 months, but by then she had already dropped it into a toilet.
Click to expand...
Click to collapse
For wet phone the best thing you can do is to use milliQ water (distilled will do also), put the phone in it, it basically removes any ions from previous fluids (take the battery out!), then let it dry out (24h should do), please battery in and use... Worked for me few times...
Btw. Good rom is virtuous inquisition or Primadonna, cm9 did not work for me so good, too many unfinished things...
Sent from my myTouch_4G_Slide using xda premium

Motherboard Problem/Broken by ME :S

Hi to everyone whats up i have some Q and i think this is for DEV section, here is the tHing i opened my phone to clean it all and i have make ONE BIG mistake i acidently broke two small peaces ( look at picture i marked it with red circle and here is link to biger picture so you can see beter http://guide-images.ifixit.net/igi/nvbKG1sC1T3xY66q.huge ). Now all work fine but Camera, actually it is working butt when i take picture it doesn't save picture it just show me a gray instead of PIC and just FC/Camera stop working and funny thing is when i use camcorder it works and make a movie and after stop it also close cam FC/etc BUT IT SAVES MOVIE and i cam watch it so PLEASE TAKE A LOOK AT PIC AND PLEASE A LEAST IF YOU KNOW WHAT THIS PARTS IS I MEAN WHAT IS THE NAME OT THEM WRITE IT DOWN ON THREAD OR PM ME SO I CAN FIND THEM OR TAKE THEM FROM OTHER MOBO AND SOLDER THEM TO MY MOBO AGAIN THANKS ALLOT

update info
Following picture helps to indicate tantalum capacitors and other types:
1. Tantalum; 2. Tantalum; 3. Electrolytic Capacitor; 4. Electrolytic Capacitor; 5. 0805 Ceramic; 6. 1206 Ceramic; 7. 1210 Ceramic; 8 . High Q Porcelin RF; 9. Variable Trimmer; and 1/4 Watt leaded resistor as reference
WHAT IS THE BEST WAY TO SOLDER THEM AGAIN AND AS I CAN SEE IN MY CASE THERE IS No 5, 6 OR 7 I THINK AND AM SURE No 5 IS THIS SMALL ONE BUTT WHAT ABOUT BIGGER ONE CLOSER TO THIS HOLE ON MY MOBO AND THOSE I NEED ARE Non-Polarized Capacitor SO I THINK THAT SIDE OF EACH ONE WHEN SOLDERING ISNT MATER IF NOT PLEASE CORECT ME AND I FAUND THIS AS AM ASUMING THAT THIS IS CAUSING MY PROBLEM ACTUALY IT IS THOSE TWO CAPACITORS ARE FOR POWER MENAGMENT OF PRIMARY CAMERA ND I FIND THIS SITE SOME ONE TAKE A PART PHONE MOBO AND WRITE DOWN EWERY THING WHAT IS ON MOBO SO HERE IS WHAT I FAUND :
Location-Primary Camera Module
Function-User Interface
Comp Family-Passive
Comp Tipe-Capacitor
Qty-2
Component Description-Ceramic Multilayer - X5R/X7R
Markings-Brown
Form-0402
Caunt-2
Length- 1.00 mm[
Width- 0.50mm
and here is complete web page with table with all parts on mobo and other and i think that some one will find this useful http://www2.electronicproducts.com/Samsung_Google_Nexus_S_GT_I9020T-whatsinside_text-115.aspx THIS IS HUGE :laugh:
AND YUP ITS THE WAY I WANTED TO DO HERE IS VIDEO http://www.youtube.com/watch?v=EWeAOemTY_E and now i need to find this small pices of S******* ahhahahaha

Maybe Adam Outler it's your guy!!!
Sent from my Nexus S

Wisemath said:
Maybe Adam Outler it's your guy!!!
Sent from my Nexus S
Click to expand...
Click to collapse
hehehe nope am on my own on this thing as a can see and i didnt spend 3 hours on this and to not find and learn what to do NO WAY AM SMART GUY hehehe am IT Tec and not MOB tec but its almost the samE procedure just little smaller BUT I WILL TRY WITH HIM IF I FAIL

I was have the same problem with pictures (gray). I've renamed "DCIM" and "Camera" folders in SDCard for backup it, and pictures now works fine. Maybe you should try it, before do some hardware things .

Good luck! Hope you get it fixed. This thread belongs to the Q&A section, this isn't android development is it?
Sent from my Nexus S

If you already identified the component and have the necessary equipment (the thinnest solder iron and tweezer that you can find, as well as steady hands), all that's left is a good luck, man.

RL77LUC said:
I was have the same problem with pictures (gray). I've renamed "DCIM" and "Camera" folders in SDCard for backup it, and pictures now works fine. Maybe you should try it, before do some hardware things .
Click to expand...
Click to collapse
I HAVE TRIED THAT NO LUCK ahhahah and i know that i broke my board part so i only need to se which part it is and now i knoc couse my face front cam is working and camcoder also but primary cam wont save pic and there say that those broken pieces are for primary cam so i ONLY need to solder them back if some one have some god advice please write it down

Just solder them with a fine tip on a 15/30w soldering iron. Done it a few times, SMD components are small, but not impossible. Have something to hold the component down and a magnifying glass will help.

AlenKing said:
... so i ONLY need to solder them back if some one have some god advice please write it down
Click to expand...
Click to collapse
How about this:
Take a piece of copper wire about 1mm in diameter.
Wrap it around the soldering iron end.
Wait until it heats up enough.
Now you have your own micro-soldering iron!

Fraser34 said:
How about this:
Take a piece of copper wire about 1mm in diameter.
Wrap it around the soldering iron end.
Wait until it heats up enough.
Now you have your own micro-soldering iron!
Click to expand...
Click to collapse
Hmmm nice one but i have seen something like soldering paste you put it under smd and just put it in place and when you heat it up with hot air it solder hehe this one is best for small things like those
Sent from my Nexus S using xda premium

Hi again i have one problem more now i know what tipe of SMD are those two but i dont know on which to chose OK this small one is x5r 6.3-10v and biger one x7r is from 10-200v i think size of both are the same just this small one is gray and other is brown, but there is allot other parameters and i dont know which is the right one (here is the datasheet of those and please have a look and if you know which i need write it down thanks http://www.yageo.ru/pdf/HighCaps.pdf I REALLY NEEEEEED MY CAMERA hahahaha)CAN I JUST TAKE THEM BY THIS INFO THAT I HAVE NOW IS THAT ENOUGH

You really shouldn't be playing around with the motherboard if you aren't 100% sure what you're doing. But seeing as you already have, the best bet would be try contacting Samsung and if if they'll fix it under warranty. Just be sure not to say that YOU messed with it. Just put everything back to where it was and make it look like you didn't open it or touch it. I just got mine back from warranty for a faulty motherboard so I know they can replace it easy.
Good luck,
Regards,
Bomboholic

Bomboholic said:
You really shouldn't be playing around with the motherboard if you aren't 100% sure what you're doing. But seeing as you already have, the best bet would be try contacting Samsung and if if they'll fix it under warranty. Just be sure not to say that YOU messed with it. Just put everything back to where it was and make it look like you didn't open it or touch it. I just got mine back from warranty for a faulty motherboard so I know they can replace it easy.
Good luck,
Regards,
Bomboholic
Click to expand...
Click to collapse
hmmm as you can imagine this phone i a bit old hehehe so... and am IT so i have done this allot on comp mobos and other electronic stuff but now i dont know which tipe of those smds i need and when i find that i will solder them nice

AlenKing said:
hmmm as you can imagine this phone i a bit old hehehe so... and am IT so i have done this allot on comp mobos and other electronic stuff but now i dont know which tipe of those smds i need and when i find that i will solder them nice
Click to expand...
Click to collapse
Oh well thats nice. If you're an IT then you know what you're doing haha. Good luck on finding the sparts you need though!
Regardss,
Bomboholic

Need urgent HELP plz.

Hi all...
Could you check one thing for me pls?
Put your OP6 on a hard surface like a study table(mine is made of wood) and charge it. Take off any case etc. Also without any shoes or slippers etc.
Then run your fingers along the sides i.e. along the metal frame while it's charging.
Do you feel like a hint of current/electricity on your fingers?
I feel like the minutest of minute vibration while running my fingers.
But only when it's on a hard surface.
When I hold it in my hands, I don't feel anything.
Please kindly do this test and tell me.
Thank you.

Xebeck said:
Hi all...
Could you check one thing for me pls?
Put your OP6 on a hard surface like a study table(mine is made of wood) and charge it. Take off any case etc. Also without any shoes or slippers etc.
Then run your fingers along the sides i.e. along the metal frame while it's charging.
Do you feel like a hint of current/electricity on your fingers?
I feel like the minutest of minute vibration while running my fingers.
But only when it's on a hard surface.
When I hold it in my hands, I don't feel anything.
Please kindly do this test and tell me.
Thank you.
Click to expand...
Click to collapse
Just tested it the way your described me too and didn't notice anything. Wooden desk as well.

Solution6996 said:
Just tested it the way your described me too and didn't notice anything. Wooden desk as well.
Click to expand...
Click to collapse
.
Thanks..
But were you bare feet...
Without shoes or slippers... With slippers on, I don't feel anything as well...
And while running the fingers along the Metal frame/side.
Cheers

are you licking a 9V battery with your other hand?

cliffr39 said:
are you licking a 9V battery with your other hand?
Click to expand...
Click to collapse
.
Was that a joke?
Of course not, I wasn't...

That happens with MacBook too! I mean thats electrical discharge / leakage. Thats pretty normal. You might get a minor shock if you lick the metallic contacts or if the same comes in contact with your sensitive areas like elbow, belly and below that
Relax!

askrpro said:
That happens with MacBook too! I mean thats electrical discharge / leakage. Thats pretty normal. You might get a minor shock if you lick the metallic contacts or if the same comes in contact with your sensitive areas like elbow, belly and below that
Relax!
Click to expand...
Click to collapse
.
.
So do I need to replace it...

Xebeck said:
.
.
So do I need to replace it...
Click to expand...
Click to collapse
Not at all.

Same happens on my OP3, but it stopped after few months randomly. I think you shouldn't get the replacament unit, or at least i didn't because i don't live in a country that oneplus is officially selling devices, if you do and it's not much pida, go ahead, but you might get the same resultl lol

askrpro said:
Not at all.
Click to expand...
Click to collapse
Imotep95 said:
Same happens on my OP3, but it stopped after few months randomly. I think you shouldn't get the replacament unit, or at least i didn't because i don't live in a country that oneplus is officially selling devices, if you do and it's not much pida, go ahead, but you might get the same resultl lol
Click to expand...
Click to collapse
.
.
Basically
I just wanna know if this extra current can affect my OP6 or not?
Like battery life or circuits in the mother board etc...
Cheers

I got it replaced and it's working fine now...