IntelliDialer problem (missing) - JAM, MDA Compact, S100 Software Upgrading

Hi all,
I installed the Taxist Rom in my Magician S100, but I notice that when I dial a new number, it don't check if that number is in the contacts list, as before. This is, don't show up a little window with the possible numbers (i think it calls IntelliDialer).
There is a way to fix this? I try to find some cabs, but no success.
Thanks.

Related

See contacts name when an SMS arrives / HTC S710 / WM6

Hi
I have a question, I have a HTC S710 running WM6. When I get an SMS
instead of showing the name of the person that sent it, it shows the
number even I have the contact stored. What I figured is that the
stored number is XXX-XXXX and the SMS comes from +506 XXXXXXX.
In other phones Ive had (Nokia, Sony Ericsson) when an SMS comes from
that number, it does associate it with the contact name.
Any ideas on how to get this done on the HTC S710?
Thanks in advance,
Dan
I don't see anything else than modify the whole phonebook and put +506 (or a needed one) at the beginning of all your numbers. Maybe all your phones were able to display correct number, but I'm afraid that WM can't do it
Nokia only compares the last 7 digits from the right.
I think it's also depends on the network you are connected to.
that's what someone told me anyway so don't take my word from it... here we don't have that problem (even if the number is sored without +972 it still show the name of the contact when SMS arrives).

Contacts not recognized while calling

Hello!
I have quite a strange problem. It appeared after I updated my Polaris to Windows 6.1 and the radio to the newest one. In general, I am really satisfied with the new sys, however there is one problem: telephone calls are not recognized basing on the contact list (which I imported using sprite backup).
It means that even though I have e.g. PersonX with telephone number 1234567 in my contacts, when I receive a call from him there appears the telephone number only (it is not changed into the "PersonX"). Have any of you ever had such a situation? I would be grateful for any suggestions how to solve it...
Best regards,
Theriel
Do You have only one contact with the same number? Not doubled - one in Phonebook and second with the same number on SIM?
Or if you have same contact under different names with the some number two or more times...
Joe Pesci with number +1-555-5555 and
Joe's house with number +1-555-555 and
Pesci, Joe with number +1-555-555
will confuse any mobile phone, and device will write only number. Check toroughly your contacts for duplicate numbers...
Nope, they are not doubled, and there are no contacts on the SIM. There is however another difference that appeared (I do not know if it has anything to do with the problem but...): previously I had all the contacts in the form:
"Johnson, Mike".
Now I have everything in the form "Johnson Mike" - there is no comma. But I am not sure if it tells you anything (maybe just a cosmetic change between roms?)
What is interesting - I can normally call using the contacts list (even from the "Phone" window) - they appear there properly.

Vario IV and callerID

All,
Just got my new VarioIV and callerID is not working i.e. when someone rings who is also in my phonebook their name and number is not displayed. The phone display unknown caller and the number.
If the same person sends me a text message their name is displayed. Anyone else experiencing this?
After some investigation I have discovered this phone does not like international numbers in the format of +XX
If I have a number in the format of 07125 123456 callerID with name works.
If I have a number in the format of +447125 123456 callerID does not work but when I get a text the person name is displayed.
Is this by design? My Kasier, Hermes and Blue Angel always worked with +XX numbers.
Thanks
Have a look in this thread:
http://forum.xda-developers.com/showthread.php?t=471329
Quite why the phone was released with this problem is beyond me.
antlane said:
Have a look in this thread:
http://forum.xda-developers.com/showthread.php?t=471329
Quite why the phone was released with this problem is beyond me.
Click to expand...
Click to collapse
I totally agree, why I need to use a 3rd party software to fix the problem is totally unacceptable. T-Mobile should address this problem, i will give their customer support a ring.
Thanks
antlane said:
Have a look in this thread:
http://forum.xda-developers.com/showthread.php?t=471329
Quite why the phone was released with this problem is beyond me.
Click to expand...
Click to collapse
Hello I tried using Schaps Adv Config and changed the trailing numbers to 9 and indeed callerID now works BUT this seems to break text messages i.e. when someone sends me text i get no notification on my phone. This is crazy, I have spoken with t-mob who will reset my profile but i have a feeling this is a Vario IV rom problem.
Thanks

[solved] Problem with Contacts and International Country Codes

So Ive been using my HTC Ozone (6.5 Standard, 3VO rom) for a while in israel, and the way the cellular network works is as follows:
country code is +972
the number that shows up on an incoming call is 052-555-5555.
The number that shows up on an incoming text is +972-52-555-5555.
The number that shows up on an outgoing call when dialing without the country code (aka 052-555-5555) is +972-052-555-5555.
All of these differences mean that if I have a number saved in the contact manager (in only one of the above forms), it isnt displayed 2/3rds of the time. If i send a text to ME(052-555-5555), the reply comes back from an unsaved number, in a new thread is +972-52-555-5555.
Is there a way for me to just save the base number (052-555-5555), and have the phone's contact manager realize that its the same number is the +92 equivalent? My current workround is saving all the forms of a number to a contact, but 1. its tedium to go through all my contacts and do this, and 2. you can only save so many numbers to a contact, which means im screwed if the contact has two different numbers.
I see all these fields in the "current country" setting, but I have no idea what they mean, or if that is even the solution.
Any help would be greatly appreciated.
hey , i got the same problem on my Omnia 2 with windows mobile version 6.5
The local incoming call won't show the country code, and sms does the opposite way.
check through all my phone setting, can not find any related option for this.
Thanks for anyone can provide a resolution.
i just resolved my problem. hope this way can help you as well.
get a regedit software on your windows mobile phone.
go to HKEY_CURRENT_USER/ControlPanel/Phone
under it, you should able to see a key name "CallIdMatch", change the value to maybe 8 or 9, which means it will match the last 8 or 9 numbers for each incoming call or sms. (use decimal) after the changing, reboot your phone.
Wow, it worked!!
Thanks a lot man!
thanks for the tip jason_ma!
i was also wondering about it.
Anyone know how to edit CalIidMatch an an HTC hero

HTC Prophet

Hey guys/gals
Appologies if this is in the wrong forum.
I have just bought a spv m600 off ebay and have a few questions for you guys.
(i have spent several hours searching here and google for answers to no avail)
The phone is unlocked and has a cooked rom on it.
WM 6.1
Rom Version 7.0.0.7 WWE
Rom Date 7/05/08
Radio Version 02.47.21
Protocol Version 4.1.13.24
ExtROM Version VincentROM(ENG)
1) The ringtone volume is ok but the message alert volume is woefully low, The phone volume is at max and i have tried various reg tweaks/fixes but they made no difference so any ideas there would be greatfully recieved.
2) If i use my voda/orange sims i have no issues but if i use my t-mobile payg sim the phone seems to think i am roaming, Is there a reg tweak to fix this?
3) On the sms screen for both writing and reading texts there is a massive envelope image watermarked onto the background, (don't know who thought that would be a good idea but its right in the way and a pain in the ass), Any way to remove it? (no option in any of the settings so i'm guessing it requires a file replace but which one?)4) I used the HTC network config wizard to setup my t-mobile payg gprs/mms settings and it works fine however when i recieve a mms it adds the international code +44 to the senders number so i don't know who it came from unless i compare the rest of the number to my contacts list.(i know i could fix this by replacing the leading 0 with +44 on all my contacts but i would rather not do this). Could this be related to question 2?
Many thanks for any help you can give, and sorry for all the questions.
I realise its and old phone and many of you may consider it not worth fixing but it is to me as i really like it. (have had a LOT of HTC phones and aside from the s700 this is my fave)
Just flashed WM6.5.3 COM3 Build 23129 WWE bikertibi edition and all issues except #2 are fixed.

Categories

Resources