force 3G on pantech duo - Non-Touchscreen Windows Mobile Other

i would like to to know if there is a way to force a constant 3G connection on my pantech duo for at&t wireless, since my my connection very frequently switches between 3G and EDGE and i would like to know if there is way to for the connection to be constantly 3G
thanks in advance!!!

Pantech 3g
lol funny cause im actually lookin for a way to foce it to be on EDGE since 3g sux around my house and keep dropping calls...

Related

My Fuze ended up on the HSDPA network...

...and nobody at AT&T can tell me why. In fact, when I showed them the phone with the H and 3 bars at the Device Service Center, they claimed they'd never seen such a thing.
The backstory is this: I've had good service at my home for a dozen years. I've always gotten solid E reception. About a month ago, 3G reception started to creep into the picture, although at a very low signal strength. It bounced between E and 3G every few moments and I started getting lots of dropped calls, no dialing, missed calls, etc. where that never happened before. I did some research here at xda and decided to drop Airplane Mode from my settings and add a 3G on-off switch using Advanced Config. After some futzing around, that worked pretty good but now whenever I try to switch to 3G, I get HSDPA. Go figure? Not that I'm complaining, because it's pretty darn fast.
But what the heck...only one Device Service Center in a city this size (San Antonio) and they've never seen a phone showing HSDPA? None of this really means anything, I'm just looking for explanations/comments.
pretty simple man...
3G = HSDPA
kevindena said:
pretty simple man...
3G = HSDPA
Click to expand...
Click to collapse
Then why do my bars read H, not 3G? Actually, based on some online research, HSDPA appears to be a superset of 3G...a.k.a. 3.5G. At any rate, the "tech wizards" at the DSC had never heard of it.
I've got a Touch Pro running on T-Mobile network. Their 3G seems to be a different
frequency than the TP can receive. If I turned on HSDPA and then wander into an AT&T 3G zone and my TP picks up their 3G network, will it overpower my T-Mobile Edge and put me into roaming?
The H is the same as 3G like the other guy had said. Plus if you went into Advance Config. to change the setting then that will replace the 3g with the H. Which is not a big deal. All the phones in Europe use the H symbol in the US we get that damn 3G. Personally I like the H ova the 3G. H=High speed
So really and truly you have nothing to worry about. Should be happy you have the H showing up than the 3G to me H is a lil faster on some phones!!!!!!
att hides their hspa icon under the 3g icon. so you never know the difference between hspa 3.5g or umts 3g. if you flashed a new rom, updated your phone canvas, changed some icons, enabled it, or who knows, chances are you are back to the standard way the rest of the world has it, with the h icon.

[Q] Jiayu G3 Signal Confusion

I got a Jiayu G3 knowing it would be a gamble concerning whether or not it supported 3G on the AT&T network, which operates 3G on 850mhz and 1900mhz.
Naturally, I lost the gamble and was stuck with EDGE, or so I thought. I was driving around today, just 1-2 miles away from my home when I looked down at my phone and noticed the H over my cell signal. I ran a speed test and sure enough it confirmed HSPA due to the 4mb down and 1mb up speed. I even go to network provider search menu and it shows both AT&T 2G and 3G selections. Then as I went back home I noticed it was back to EDGE again. Now I have an old Samsung dumb phone that shows what band you are on in a developer menu, and I confirmed both 850mhz and 1900mhz bands have decent signals in my house, yet my Jiayu can't connect to it.
Can anyone help, this has really confused me.....
JonR1230 said:
I got a Jiayu G3 knowing it would be a gamble concerning whether or not it supported 3G on the AT&T network, which operates 3G on 850mhz and 1900mhz.
Naturally, I lost the gamble and was stuck with EDGE, or so I thought. I was driving around today, just 1-2 miles away from my home when I looked down at my phone and noticed the H over my cell signal. I ran a speed test and sure enough it confirmed HSPA due to the 4mb down and 1mb up speed. I even go to network provider search menu and it shows both AT&T 2G and 3G selections. Then as I went back home I noticed it was back to EDGE again. Now I have an old Samsung dumb phone that shows what band you are on in a developer menu, and I confirmed both 850mhz and 1900mhz bands have decent signals in my house, yet my Jiayu can't connect to it.
Can anyone help, this has really confused me.....
Click to expand...
Click to collapse
it use 2100Mhz only for 3G.
typical for china mobile phone...
use google chrome
open this http://www.ejiayu.com/Product-8.html
haybat said:
it use 2100Mhz only for 3G.
typical for china mobile phone...
use google chrome
open this http://www.ejiayu.com/Product-8.html
Click to expand...
Click to collapse
I think you missed the part that I actually get 3G in some areas, and it's definitely not on 2100MHz. It's 850 or 1900MHz.

[q] hsdpa+/hspa+

Hello guys
In 3G Networking on Galaxy Note 10.1 one can force either connectivity on 3G (WCDMA) or 2G (GSM). But as long as I want to use the tablet on 3G being forced on WCDMA, the network keeps changing between 3G, H and H+. I know that making calls forces the network to 3G mode. However, internet can be surfed on all 3G, H and H+ networks.
My question: is there any method available to force the Note 10.1 to connect on H+?
Thank you ^_^
tweetatoo said:
But as long as I want to use the tablet on 3G being forced on WCDMA, the network keeps changing between 3G, H and H+. ... My question: is there any method available to force the Note 10.1 to connect on H+?
Click to expand...
Click to collapse
You almost certainly don't want that- as you'd lose connectivity outright all those times you're not showing "H+" on your service display.
The radio isn't just switching between modes for no reason- it's doing its best to retain connectivity depending on signal conditions.
kcrudup said:
You almost certainly don't want that- as you'd lose connectivity outright all those times you're not showing "H+" on your service display.
The radio isn't just switching between modes for no reason- it's doing its best to retain connectivity depending on signal conditions.
Click to expand...
Click to collapse
Yes, I know
Just like forcing 3G in an area with weak 3G coverage. But at the end, 3G is forced so that a download does not get interrupted in case of auto-switching.
BTW, I want to force H+ in an area with strong H+ coverage. What happens is that it keeps switching to H and sometimes to 3G just because it is a bit stronger
Though H+ has a very strong coverage in the area.

T-Mobile LTE Issue

I have a LG Nexus 5 and i have a strong LTE signal in my area along side HSPA+ if i make a Phone call LTE drops and HSPA is activated while the phone call is over it goes back to LTE in 20 seconds or so.
However if i use data while on HSPA+ mode it seems it wont handoff to LTE seamlessly
Like if you're on Verizon using 3g streaming consistently (not pandora something consistent downloading/upload like tunein radio) it would secretly bump you back to 4G LTE without any problems and stream would continue without even you noticing
T-Mobile however on the other hand doesn't until you stop the data usage and then it bumps back up to LTE
test it out download Tunein radio and stream a station make sure you're on HSPA+/HSPA then while streaming go to a location with like full or best LTE signal. (I went to the mall and drove right under the tower and phone still insists HSPA+)
not sure whats going on here? the Network not telling the phone to handoff? or some internal network issue or an issue with my nexus 5
by the way i am stock android 4.4.2 no root or recovery or whatever
So my question is is there a way to fix this? or is this something i need to email John Legere about?
I have similar issues but for Verizon losing eVDO and going to LTE is probably because EHRPD is making the switch more seamless. However, when my phone switches from HSPA to LTE I drop down to GPRS for a few seconds.
Sent from my One X using xda app-developers app

[Q] OnePlus One LTE BAND selection?

Is there a way to see and change the LTE BAND that my phone is on? Rogers support aws, 2600, 700. So I was wondering if I could manually change between them. The S5 has that option in the hidden menu, so I'm hoping I could do the same on this one.
Thanks.
The phone choose the band himself, if he don't find bands authorized by your phone company, he can't use them.
tonymtl said:
Is there a way to see and change the LTE BAND that my phone is on? Rogers support aws, 2600, 700. So I was wondering if I could manually change between them. The S5 has that option in the hidden menu, so I'm hoping I could do the same on this one.
Thanks.
Click to expand...
Click to collapse
*#*#46363#*#* > Phone information > Set Preferred Network Type > 'LTE/GSM auto (PRL)'
That's as far as you can get in telling it what network to operate on. It won't let you select specific bands (at least not stock). Mine was set to 'TD-SCDMA, GSM and LTE' out of the box (international version) and since I don't plan to use my phone in China anytime soon, it didn't make sense for the phone to waste resources searching for a TD-SCDMA (China's homebrew 4G) signal. Haven't noticed much improvement to my LTE signal though, still the weakest radio I've seen in a 'flagship' in a while.
Thanks.
I am also on Rogers.
Does that mean when I am on the phone, it will revert to EDGE instead of 3g by using the LTE-edge setting?
I have major issues with reception on this phone.
LTE Works Fine but the 3G/H+ signal is awful, absolute disaster on this phone. It is extremely, extremely weak. And I lose coverage often and over 50% of the times my calls go straight to voicemail because Rogers uses 2g/3g for calling. The phone can't drop back to 2G or 3G in time to receive calls when on LTE
Rly frustrating. Have tried playing with all the settings.
Same issue
hashim71 said:
I have major issues with reception on this phone.
LTE Works Fine but the 3G/H+ signal is awful, absolute disaster on this phone. It is extremely, extremely weak. And I lose coverage often and over 50% of the times my calls go straight to voicemail because Rogers uses 2g/3g for calling. The phone can't drop back to 2G or 3G in time to receive calls when on LTE
Rly frustrating. Have tried playing with all the settings.
Click to expand...
Click to collapse
I'm having issues with 3G H+ too. Dont know its CM issue or not coz I had nice H+ signals on Color OS...
Can't even use internet data. most of the time network drops after using internet for a bit.. Network just suddenly gone and after that it comes back with no internet. Internet comes back online after a while...
Really worried.. and annoyed coz can't seem to find any solve for this. Even Mahdi rom had this issue..

Categories

Resources