i have big problems when im trying to update cerom or extended rom,i have 2 error codes ,error 112 and error 113!!!the only thing that i can do with my universal is to set him in bootloader mode 1.01 or to do hard reset and have the white screen witch ask me to puch 0 to restore default or x to exit,when i do this and puch on 0 to restore default settings he shut down and do nothing else!!!!when i charge my universal no light wil appear like before,the orange one!everything is begon when i do clear storage in running windows of my universal!!!!
please please help me to restore it!!!!
when i try to do update of cerom or extended rom it begin the update from 1% in one step to 7% ,then i got error 112 or 113,please anywone can help me,please....
my universal is unreconized in xp but my htc tytn is reconized!!!!
i can do any update of radio rom succesfully but no another update
please somebody to help me????
Related
Hi. I have installed a rom to HTC s710 and i run another program on computer, after runnning that rom installation the process was stoped whit error(35%).after reset phone i haven't any soft. only i have a starting logo and nothing else. The hard reset do nothing-the same resaults (starting logo). I can only turn on "3 colors screen" but there when i want install a rom, process going to 3% and then i see a error and the phone is restarting.
What can i do whit that problem?? How to install rom from this "3 colors screen"??
I was installed rom many times when i have a windows mobile on my smartphone but now i don't know what to do.
PLEASE HELP !
I think you should do the USPL before flashing. I would guess that your error is something like 'corrupt ROM'!?
udp.
I couldn't use a uspl-cid bypass(uspl_116_jockyw.bat) becouse it should be running in windows mobile. In 3 colors screen i run the VOX-USPL-RUU(romupdateutility.exe [1,37 mb]). the process come to 100%, reset and old starting screen and nothing(on cpu wrote me : error 270:update error, image file is corrupted.). Maybe i doing something wrong. Help me in steps.
1. i pushing a camera button and conneting usb.(i have a 3 colors screen-information: ONBL 1.19.0000, spl 1.19.0000, cpld - 04)
2. what next??
i have ATHENA 100 in T-MOBILE Ameo........ i update lot of rom's on my ameo with success . my phone status is: IPL-v1.00 SPL-v1.20. Olipro.
my bad luck i try to update with that rom (Athena_SPL3.5_WM6.1_WWE_R6.1-Michy) after 92% rom got error & phone restart. after that my Ameo hang on startup. i put my phone into usb mode by pressing CAMERA key + POWER & try to upgrade with lot of diffrent roms but i got ERROR[244] INVALID MODEL ID (pic attached below) plz help me how can i update my phone in working condition??>......................????
sorry but
wrong thread
Well I've tried everything possible, updated device manager fro vista. MDA Vario 3, connects for active sync but after running KaiserCustomRUU.exe. where it update the crrunt ROM version... it changes the screen into 3 color screen , after few minutes in the same condition............ 0% process........ and then........... shows me an error message as under:
ERROR [262]: UPTAE ERROR
The ROM update utility has encountered communication errors during the update process. The program will guide you step-by-
step to recover from the errors so you can continue the update.
and i need to restart MDA. although on recovery process it directly come to normal screen instead of 3 color screen, which means (i guess) it never started changing ROM current picture.
Any help about it plz.
Regards
Iaan
iskhan said:
Well I've tried everything possible, updated device manager fro vista. MDA Vario 3, connects for active sync but after running KaiserCustomRUU.exe. where it update the crrunt ROM version... it changes the screen into 3 color screen , after few minutes in the same condition............ 0% process........ and then........... shows me an error message as under:
ERROR [262]: UPTAE ERROR
The ROM update utility has encountered communication errors during the update process. The program will guide you step-by-
step to recover from the errors so you can continue the update.
and i need to restart MDA. although on recovery process it directly come to normal screen instead of 3 color screen, which means (i guess) it never started changing ROM current picture.
Any help about it plz.
Regards
Iaan
Click to expand...
Click to collapse
First did you do everything in this post?
iskhan said:
Well I've tried everything possible, updated device manager fro vista. MDA Vario 3, connects for active sync but after running KaiserCustomRUU.exe. where it update the crrunt ROM version... it changes the screen into 3 color screen , after few minutes in the same condition............ 0% process........ and then........... shows me an error message as under:
ERROR [262]: UPTAE ERROR
The ROM update utility has encountered communication errors during the update process. The program will guide you step-by-
step to recover from the errors so you can continue the update.
and i need to restart MDA. although on recovery process it directly come to normal screen instead of 3 color screen, which means (i guess) it never started changing ROM current picture.
Any help about it plz.
Regards
Iaan
Click to expand...
Click to collapse
you have vista then your prob better off flashing via sd, also you shouldn't have started a new thread to ask this question, this forum isn't intended for every time someone has a problem and searches and can't find the answer to start a new thread. PM someone you see posting that seems knowledgeable and ask that person if you can't find what you are looking for.
Flashing through SD is always the best. And its a lot safer than USB way.
Thanks for the help guys... closing thread as this issue can be fixed by reading the sticky and also the wiki..
Peace,
Josh
Hi there
this happened while upgrading htc_wwe_05 of collute.
Upgrade continued till 20% ....then i got error on pc it says please reset the device and start the upgrade again ......
Then i did it so ...but no use .it starts upgrading process after 2% it stops.
please some one help ....
I'm also not sure what needs to be done on your case..but was it fully charged before upgrading? try to remove the battery then put it back on after 30 minutes..or try flashing a different rom before flashing cotulla's rom..and be sure that the radio rom is 1.12..
i have a dopod 838 pro and i deside to install a new rom
after i flashed the rom and the progress bar reatched 83%
my laptop battery went low and the laptop shutdown
my phone stuck on the progress bar 83% ,so i removed the battery and put it back again start the phone but the phone stuck on wm start screen
and every time i try to flash new rom the phone restart at 1% progress.
if any one could help tell me plz..
werewolf991 said:
i have a dopod 838 pro and i deside to install a new rom
after i flashed the rom and the progress bar reatched 83%
my laptop battery went low and the laptop shutdown
my phone stuck on the progress bar 83% ,so i removed the battery and put it back again start the phone but the phone stuck on wm start screen
and every time i try to flash new rom the phone restart at 1% progress.
if any one could help tell me plz..
Click to expand...
Click to collapse
a dopod 838 pro is a tytn and not a tytn II
either way you should be able to load a rom to a SD card and flash it that way Id recomend gettting an official stock rom for your device and try reflashing it via sd card.
info on your model phone can be found here
http://forum.xda-developers.com/wiki/index.php?title=HTC_Hermes
http://forum.xda-developers.com/forumdisplay.php?f=306
under the above forum look for the forums with the thumb tack icon they will give you all the help that youll need with unbricking your phone good luck.
Please post in correct sub forum thread closed.