i recently upgraded to darkforce team new wm6.1 i just opened the utility called romupgradeut.exe after it upgraded my device....i did a hard reset as i was instructed and afterwards when my mobile started customising installation it gave an error of \storage\custsk.exe i cudnt make it out what it is...i dont knw how to kill extrom...so if anyone has a link for it pls make it available as its too urgent for me to get it right....and one more favour from you guys...( is there any visual videos available of how to flash the rom n using mtty stuff)
Cool it brother, an often seen message - especialy from the new batch of WM 6 ROMs
Simply do a soft reset on reciept of the message and your OS will load as normal.
Related
First let me tell you where i am at. I was running Farias WM6 Real Thing Rom, but there were a few bugs and a lot of junk programs i didn't want.
so i used the Faria ROMkitchen to flash my rom, which went fine, the phone flashed and everything was ok in use, however i left DRM selected which i dont want by mistake. and upon further examination the MS office icons are not in the programs menu, but the pword and pexcel files are in the windows directory and do load fine when executed. but i dont know why this was the case when i did have office selected.
and the major problem is when i connect via usb, activesync recognises the connection. but doesn't ask to create a partnership, but goes directly to guest profile. (I am using Activesync 4.5) and when i try to connect to my vista machine with Mobile Device Center i just recieve an error when the connection is active. I cannot even use the phone for push email with my exchange as i am unable to install my self signed certificate as it states it is unsuccessful when i attempt to install and gives me the classic microsoft helpdesk advice asking me to reboot .
so i tried to run through the kitchen again de-selecting DRM and reflashing, but when it tries the flash i recieve error ERROR [212]: FILE CREATE The update utility can not create the requested file. Please check your update utility. so i reset to the bootloader and tried the flash again and recieved error 300 saying i needed an updated Rom Upgrade Utility.
I then tried to install the Tmobile Ship Rom but this would not work as the upgrade utility reports that it cannot connect to the phone with various connection codes even in the bootloader.
My Wizard is a G3 device and has been CID unlocked and i have installed many a rom on this phone.
please help as i am on a malfunctioning WM6 rom that i cannot connect to via activesync and can only use for making calls only.
any help much appreciated, i have had occasional problems flashing in the past but i could resolve these easilly but this is leaving me stumped, it seems like the sync portion of the phone is not working correctly so i cannot downgrade to my original tmobile uk rom.
help help help
fuzzysb
u try flashing on a different OS?
Update after much screwing around, i did try flashing on XP and also Vista but no go. interestingly i have finally managed to push through the oriiginal update from tmob but it was achieved by uninstalling and re-installing activesync a few times and booting into the bootloader its now upto 80% and running. another observation that is wierd, the WM6 rom that was installed was missing cpanel icons like power and backlight. i will upgrade using the kitchen one last time and see if it goes ok this time.
I have previously upgraded to RWE wm6, now the official ATT upgrader says "you have a newer version of this software" and wont update to the latest ROM. Any suggestions to fool the updater and install official WM6 release?
Thanks in advance- this forum always amazes me!!
Is a simple edit of the payload file all thats needed here?
File Edit
DocKill said:
I have previously upgraded to RWE wm6, now the official ATT upgrader says "you have a newer version of this software" and wont update to the latest ROM. Any suggestions to fool the updater and install official WM6 release?
Thanks in advance- this forum always amazes me!!
Is a simple edit of the payload file all thats needed here?
Click to expand...
Click to collapse
Yes.
http://forum.xda-developers.com/showthread.php?t=345531
Thanks
Awesome as always!! Thanks!!!!
Next question....Installer gets through initial phase, treo gets 4 dark colored bars, then connection is lost and install cant complete. I tried removing the SD card-no luck. Advice ?
Thanks again
I got the same problem , after the erase all data it just froze up ..... is it bricked. hopefully someone can help
I also had the same problem with my device but what i did is switch computers with Windows xp and with Activesync 4.5 that should do the trick
fixed
installed from XP instead of Vista...no problem at all. Appears Vista has trouble with recognizing the treo after loses activesync connection
seems my problem had to do with the unit, i did the sdupdater recovery tool from palm to no avail, finally i removed the battery and reinserted it and bam WM6 appeared after numerous attempt at upgrade and different ROMS tried. I asume the original upgrade got stuck and the removal of the battery, helped it finish. Who knows at least its not bricked
Can someone direct me to a walkthrough for a hard-reset on an xda mini s?
I have searched and searched these threads-alas! but i do recall that i can perform a hard reset to reload the o/s restart in basic mode and delete the unwanted software (which files it would be i dont know)
Also I've been following the guides given on this site to unlock cid (succsessful) and flash the rom on the pda, but cant get Vista to run the flash rom update utilities software to flash the rom to downgrade. It keeps closing it down. I've spent hours attemping this but have had to concede that Vista isnt wanting to play! yes i have installed active sync and the rom update version for Vista. Does the cab file that has to be installed on the pda have to be re-installed every time the thing is rebooted by the software? After dozens of goes i still have spl's of 2.1. (I only aim to flash the rom with the T-Mobile 2.6 version of WM5 to get a stable device at the moment)
Without wanting to spend valuable hours of my life persuing this i might just try it on a friends xp desktop Pc and see if i can get success.
Hi All
I have Dev G1 i was enjoying it until one day i decided i want more ,
so i went on line looking for images and i found one that i liked
which includes the multy touch and the root access i have followed the
steeps and it worked ,
until i received a call form my operator claiming that my mobile is
sending bulk SMS :s .
so i want the device back to its original state now i have downloaded
the radio image and the recovery image from HTC and i followed the
steps i have already done it once when i updated from 1.0 to 1.1 , any
way the radio image updated successfully , and i have copied the
recovery image and restarted with home and then i pressed Alt+s .. and
devices shows that its updating but nothing its the same with the same
SMS problem ,
so i wanted to try the fast boot i have found the fast boot screen
changed from the skater android to some screen with rainbow colors and
adb cant detect the device and i have T-mobile shows up when i start
the dev it shouldn't be there , any way all i want is to have my
mobile back
My current status is :
Model number
T-Mobile G1
Frimware version
1.1
Baseband version
62.33.20.08H_1.22.14.11
Kernel
2.6.25-01843-gfea26b0
[email protected] #1
Build Number
Kila-user 1.1 PLAT-RC33 126986
OTA-rel-keys,release-keys
Note i have followed the steps from this link
http://hehe2.net/gadgets/howto-multitouch-tethering-task-manager-for-android-g1/
Pleaaaase help me
maybe this has something to do with myFav.
are you with T-mobile ?
No
Hi
No I'm not with T-mobile , I'm from jordan .
Get JF ADP1.1 or Haykuro's firmware. MyFaves is causing it, and sending SMS thinking you are on T-Mobile.
Thank you , i will search for JF ADP1.1 , but is there anyway to restore it as i got it ?
as I guessed in my first reply, since you are not with T-Mobile and you have myFav preinstalled, it sends sms to the service provider. Its an application that has to do with a plan provided from T-mobile.
this link includes the latest builds of JF including ADP1.1h.
Thx alot
Thanks allot Nayyak and coolbho3000 i have downloaded the holiday update by JesusFreke and its working , though i still want to ask if there is a way to get my phone back the the original 1.1
another problem
Hi
After I have installed JFv1.43_Holiday.zip , and every thing was cool , untill i decided i want to call my friend and each time i enter the dialer or some one calls me i got the following error
The process android.process.acore has stopped unexpectedly . please try again
i have restarted the device i have tryed again over and over but nothing changed .
Thank you in advance
Re-download update, wipe, install, wipe. Fixes 9 out of 10 bugs.
mshayeb said:
Hi
After I have installed JFv1.43_Holiday.zip , and every thing was cool , untill i decided i want to call my friend and each time i enter the dialer or some one calls me i got the following error
The process android.process.acore has stopped unexpectedly . please try again
i have restarted the device i have tryed again over and over but nothing changed .
Thank you in advance
Click to expand...
Click to collapse
You should do a wipe when you change to a different build (e.g. from RC to ADP or vice versa).
Thanks
It's all good now , thanks all for the tips
official adp 1.1 is here:
http://member.america.htc.com/download/web_materials/ADP/signed-dream_devphone-ota-142608.zip
this is the complete recevery, image+ radio rom.
Hi`Guys
for the last few days im having an serious rom problem with my Sony Ericsson X1 sines i was looking for an good 6.5 rom that fits and works smooth with my X1 i found an cooked 6.5 rom belong to HD2 aka Leo2 and i reveiw it and i like it so i charged my phone to the full and unlock my phone using "HARDSPL Tool" after that i upgraded my phone with the new rom ,i like it at the first but after some times i faced alot of hangs and bugs within the rom besides the rom overload the processor that would make the phone runs slow so i had to place back my original rom so i used Sony Ericsson Update service "SEUS" to replace my current rom and when i runed the update it asked me to place back the stock SPL and i did and runed the update again but it said that i have he latest software update so i tryed to go all the way around and use the traditional way to downgrade my phone but here is the problem when ever i start the downgrade prosses it gives me update error number {[260] connection} the update stop and start the recovery prosses ,then i tryed to reunlock the phone but it gave me the same error ,so i tryed to get smart and i stop using the computer for the downgrading and moved to flashing methods farmatted my micro-sd to FAT32 placed the required nbh file named with Kovsimg but when i bootload my phone it stops at the loading part without going throw the checking prosses then done the same with the the SPL but the same it stick at the loading stage ,i start to get hopeless my last option was to use the MTTY Tool but it only formatted the rom without flashing the phone
so now im using 20% of my phone option to avoid bugs or hangs and my phone stick with bad 6.5 rom protacted with StockSPL that cant be changed
so guys any one faced the same problem ? plssss help i really feel like my phone its on handicap status
pls help me...