Related
Hello,
Yes, I searched everywhere but didn't find any answer.
Is it possible to disable the backlight when notifications comes ? For example, when a SMS or an e-mail arrives, the screen powers up and my pocket presses the screen and do bad things on the screen. This would be a cleaner idea than locking the screen!
I know that phoneAlarm have an option for this but I'm using PhoneWeaver for this profiling job (which is smaller than it). I think it must be a reg key somewhere for this :/
Thanks in advance for your precious help!
To be honest, I do not understand you question but I think you are searching for the sound and alert settings?
Go to start > settings > sound and alerts (and then the 2nd tab)
If this is not what you are looking for, could you be more specific?
he want it to when it turns on because of an alarm or sms or the likes that it
dont have backlight on the lcd
personaly i doubt it's possible i believe that when notifications turn the device on it's 100% the same thing that is sendt to the os as when one press the on button if that is the case that the os cant tell the diff
i doubt it could have different backlight settings depending one
what turns it on
holding the button down for a bit turn off the backlight on many devices
untill the button is pressed for a bit again
also when it's turned off so when the notification turns it on the backlight will be off
but ofcause so will it when power button turns it on
I would like my device (TyTN/Hermes) under windows mobile 6 not to "turn on" when a message arrives because my phone case press on the screen while on my pocket and some strange things arrives (delete messages, surf on the Internet, ...) as random parts and buttons are pressed...
I was hoping this simple thing could have been done easily
slide2unlock
I was wanting the same thing also since I carry my phone in my pocket(htc mogul). As I would reach into my pocket to pull out the phone I would end up pressing button to where programs would open and what not. I tried slide2unlock and I think that has solved my problem pretty good. The only time the phone get unlocked is with an incoming call. Other than that the screen just turns on with an incoming text. Good thing about this program is that if you turn on your screen, the buttons won't do anything without sliding the slider to unlock.
if a password is set it dont go to the today screen and random screen pokes will not result in wild pr0n surfing
or getting a case with s screen in front like the silicon ones or the
full plastic ones will safe the screen from clicks and damage too
I am also looking for a solution. I am currently using slide2unlock, but I would prefer the behavior mentioned above. Specifically, I would like the phone to stay in standby mode (screen off, not responding to button presses or screen taps) when an incoming SMS arrives or phone acquires or loses signal. Currently these behaviors will turn on the phone by itself.
I recently updated to Shamanix 1.3 (aka Schap's 4.01 customized) which has this behaviour
The phone don't turn on when an e-mail/sms/mms arrives (only when a phone call arrives)
Anyone has found the solution for this?
Thanks!
GM.
I would like to know how much larger the cruise against the touch. does anyone have both that can post a side by side shot
I'm in the same boat. It's 10mm longer and 1.5 mm thicker according to specs. Really wish I could experience one before buying!
I was concerned about this as well, but its not bad. Its not too thick for me.
I am very glad I bought it. Its a great device... everything worked perfectly out of the box.
From the specs it's almost identical in size and weight to the Artemis so if you could find a store with an Artemis (or re-brand like O2 XDA Orbit) then that would give you a really good idea of how the TC will feel in the hand and/or pocket. In fact the TC is about a mm thinner than the Artemis so if anything the TC will be slightly more pocketable.
I'm in the UK and when I bought my first device (an Artemis) I went into an O2 shop and played for a long time with the Touch and the Artemis (O2 XDA Orbit). I ended up buying the Artemis, even though it is bigger and I really do care a lot about size and weight, and I didn't regret it. I find it completely unobtrusive in my pockets.
- Julian
Here you go (halfway down the page)
http://www.howardforums.com/showthread.php?t=1303843
JNGold said:
Here you go (halfway down the page)
http://www.howardforums.com/showthread.php?t=1303843
Click to expand...
Click to collapse
Geez, the Polaris IS thick.
I almost pulled the trigger on a Polaris this week but now I'm really torn. I dusted off my old Eten and Trinity and looked at some friends devices this weekend. One thing the Touch has going for is the very few small hard to press buttons. Add to that the screen that some claim is not sensitive enough and you have a device that is ideal to store in your pocket. With my Trinity in my pocket, if I got a text or a call, buttons were always pressed and several apps opened. Even with the flush screen, the Touch never accidentally calls people, etc.
Hard to tell from the pics - does the Polaris have a large button pad like the trinity? I mean, are all the buttons one large piece?
My problem isn't the lack of features with the Touch. I can't get more than 1 bar in my office with AT&T GSM and miss calls but with 3G, I get 3. I've tried this with my trinity and 8525. I've Asked my AT&T rep and he can't explain it. Thought the size of the Touch would offset the reception issue. After 6 mo, I am looking for a small device with 3G. Considering a Polaris or LG MS25. Odd thing is that Sprint and Verizon don't get a signal either but T-mobile does. I'm gonna pop a T-Mobile SIM in my Touch and see. I'd hate to switch carriers but HTC has let us down by not putting 3G in the "enhanced" Touch.
Baxter said:
(..) With my Trinity in my pocket, if I got a text or a call, buttons were always pressed and several apps opened. Even with the flush screen, the Touch never accidentally calls people, etc.(..)
Click to expand...
Click to collapse
If you're seriously in doubt between these two devices you really need to take a look at S2U2 to lock your device (automatically on screen off).
Incidentally: I used to have S2U2 installed on my Artemis, but on the Polaris the ON/OFF button is situated on top of the device, which means that it is very unlikely going to be pushed inside my pocket. By default all buttons except ON/OFF are switched off on screen off. So far I haven't felt the need to install S2U2 on my Polaris, however happy I was with its performance on my previous device.
Seriously, the Touch is no competition for the Polaris, performancewise.
I've been looking for a long time for an app that would prevent all buttons & screen from waking on incoming sms/call but still allow audible alert or vibrate. Pressing on/off would wake much like opening a flip phone. I'd prefer that it run in the background and not require a slide or button combination to "unlock". Just simply have to press power to wake. Does it do that? I'll give it a try if you say it does.
Baxter said:
I've been looking for a long time for an app that would prevent all buttons & screen from waking on incoming sms/call but still allow audible alert or vibrate. Pressing on/off would wake much like opening a flip phone. I'd prefer that it run in the background and not require a slide or button combination to "unlock". Just simply have to press power to wake. Does it do that? I'll give it a try if you say it does.
Click to expand...
Click to collapse
What you're describing is the default functionality of the Polaris. After 3 minutes inactivity it falls asleep on screen off (you can use power button to force sleep) and locks screen and buttons except power button.
Calls, notifications etc. still work, (bluetooth) audio will also keep running.
To awake, press power button.
So you are saying that the polaris doesn't wake when you have an incoming call or sms? Maybe there is a misunderstanding. I want to have to press power before being able to answer.
I was a bit surprised to just discover, by accident, that whenever I press any of the front hardware buttons when my device is in standby then the Touch Cruise doesn't completely ignore them, it switches on the button-panel lights for a while and then they go off after the timeout. For the red hangup key it also makes a beep when the button is pressed as well as activating the button lights.
As far as I can tell this is all the device does, it doesn't switch on the screen or activate any of the functions associated with the buttons I press (as far as I can tell) but I still worry that if I accidentally get the TC in a position in my pocket (when I'm driving or just sitting down for instance) where I'm constantly activating a button then after a few hours I could either drain the battery unnecessarily by keeping the button lights permanently on and/or I could crash the device by swamping it with button-pressed messages.
Do other people see the same behaviour when their TC is in standby and is there any hack to disable this?
- Julian
Try going into Settings - System - Key Lock
and change it to the top option "Lock all buttons except power button"
Same suggestion - doesn't make a sound here
That DOES happen when he is locked and NOT in standby. Still then - the volume keys work which is not really desired but hey...
Thank you mouseymousey and SabbeRubbish. You fixed my problem, but not in the way you probably intended.
I'd just been narrow minded and assumed that, if this option was available, it would be in the Button settings app so I hadn't seen the Key Lock settings app. Thanks to you both I found this and, guess what, the top "Lock all buttons except power button" WAS set but my buttons still activated the backlight and sometimes beeped.
Confused, I changed the option to the bottom "Do not lock buttons" and it behaved as expected, i.e. any button press completely woke up the device. I then set the option back to the top "Lock all buttons except power button" and this time my problem is solved, i.e. no reaction whatsoever from pressing the front buttons.
Wierd. My TC obviously got itself into an odd state and toggling the button lock preference seems to have fixed it. I'll keep an eye on this one.
Thanks again for the invaluable advice.
- Julian
I shouldn't let misleading info lie here so here's my confession. This issue turned out to be nothing to do with my device getting confused about its key lock setting. The fact that it fixed itself when I toggled the key lock setting was a coincidence, what I did at the same time as toggling the setting was to also close down Conduits PocketPlayer which I had still minimised and running (although not playing any music) in the background.
The problem appears to be with PocketPlayer (PP) and is 100% reproducible. If PP is still running (even minimized) when the device is put into standby then I get the behaviour described in my initial post, close down PP before going into standby and everything is OK and the front buttons are totally inactive.
I have of course filed a bug with Conduits but the good news is that noone needs to worry about any generic TC/WM6 wierdness here.
- Julian
Hi all,
Sorry for the cross-post, but I just realized that this is probably the best forum for my question..
I normally don't carry a watch, so I look at my TC to get the time. I would like this funtionality mapped to one of the hardware buttons:
Wakeup the display and show a big clock for a second or two, then turn off the display again. (Preferably, the device should still be locked throughout this.)
Is there any similar software?
Thank's in advance!
Edit/Delete Message
hi
i have an x7500 and i use the app called slide 2 unlock. that's the iphone program developed for ppcs. what happens is when i press the power button, the screen comes alive and the 2 most prominent features on the screen are the time (large display) and the slide to unlock the device. i then press the power button again or i leave it to power down on it's own. the same thing happens when a call comes through. i have a bt headset and the screen comes alive. but no app can be launched because the slide 2 unlock button will in fact lock the screen. the only way to unlock it is by unlocking it using the slider.
other's in the forum could have other apps as well. but so far that works for me.
just my 2 cents
Thank you very much, Robson!
Based on your description, I'll keep looking for something that will not interfere when a call comes. Thank's anyway, though!
Anyone else with any ideas?
simpan said:
Thank you very much, Robson!
Based on your description, I'll keep looking for something that will not interfere when a call comes. Thank's anyway, though!
Anyone else with any ideas?
Click to expand...
Click to collapse
You can disable the phone options in S2U2 if you want
Thank's, DocteurN! That's pretty close, except if set to 5secs it will turn off the phone after five all the time, not just when Ive pressed the power-button to get the time. Nearly there..
SPB Mobile Shell does this with its now screen. OR SPB Time can do it with its screensaver !
Both must haves anyway imho !
Dave
Thank you dmj1973! I'm trying with the SPB apps now.
The SPB apps are great but there is no keylock, as far as I can see..?
Basically, from sleep mode, I just want to push a button to see the today screen or at least the time for a second or two, without unlocking the device.
Which is exactly what I do with S2U2 - I press the power button, glance at the time, then hit it again... Perfect!
Is there a program so that when your screen is locked, you can assign one button only to wake your screen and have access to the unlock slider? Now, if any of the 4 hard buttons are pressed, it brings up the unlock screen. The problem is, when the phone is in my pocket, any one of the 4 buttons, if accidentally pressed, wakes up the screen. Then of course, I hear my phone in my pocket clicking because the heat from my leg is "tapping" the screen. I just want to have the right hard button wake the phone up.
I cant find an option in the settings for this, nor any threads that discuss it.
Thanks.
I really admire you if you're able to slide the slider with the phone in your pocket.
LOL. No, I dont slide it. Just that when in my pocket, when any one of the 4 hard buttons are pressed(accidentally), i have to press the power button to lock the screen again. A pain in the butt. I what the phone to have only one hard button, not 4, that will shut off the screen when the phone is locked.
I'd like it too.
Maybe even some old school unlocking shortcut that uses hardware key combination (e.g. Home + Vol Down), rather than slide.
The Diamond, or was it the HD, had a button on the top to wake the phone up. That was nice because it was hard to accidentally press that button when it was in your pocket.
I use pocketshield for automatically unlocking my phone when the light sensor senses light coming in. An added benefit for this is that when the phone is in my pocket and I accidentally press any button, the screen will automatically shut itself off again after 10 seconds since there is no incoming light. This tool has really made my life so much easier as it gets rid of the stupid slider thing as well; you can use the lightsensor, the motion sensor and an old school sliding mechanism to unlock your phone- brilliant stuff!
Iarapilot might have meant something else indeed. Most of WM6.1-WM6.5 have a tab in the Start->Settings->Buttons screen that allows you to choose which kind of wake-up you need: waking up by pressing the Pw-ON button or waking up pressing whatever button you want. Sudden power-on is very boring, even thought you can't make your device work as you need to slide the screen. But this is a power comsuption anyway and I wonder why previous version had this chance regardless the home screen features. I do want it!!
I think it's a matter of regkeys, somebody of us who's used to "playing" with regkeys should figure out how this feature could be resumed.
Hope you help us!!
Maybe I didnt make my point very well. I just would like to have only the R hardware key, when pressed, wake up the screen so as to be able to slide to unlock. Not 4 buttons, that when any of those are pressed, wake up the screen.
I also have the problem, I only want to have only one key to wake up not other key
Please help us
Since it's free, I add myself to the request queue Having the screen wake up only on powerbutton press could be useful to reduce to 25% the probabilityof screen turning on by accident when buttons are pressed inside the pocket. Battery saver for sure.
Same here. I've been looking for this since I first got the phone! My old kaiser could do this, surely it wouldn't be too hard to implement on the HD2?
edit: nevermind, posted in the wrong thread
I don't think any software can control that as key presses send electrical signals direct to the chip/power unit, where the "power on" circuits reside. What software can do is turn it off again if not unlocked within a specific amount of time, so battery is saved. Screen touches shouldn't be an issue either if using a lock screen.
les_paulde said:
I use pocketshield for automatically unlocking my phone when the light sensor senses light coming in. An added benefit for this is that when the phone is in my pocket and I accidentally press any button, the screen will automatically shut itself off again after 10 seconds since there is no incoming light. This tool has really made my life so much easier as it gets rid of the stupid slider thing as well; you can use the lightsensor, the motion sensor and an old school sliding mechanism to unlock your phone- brilliant stuff!
Click to expand...
Click to collapse
and doesnt create any problem in normal use? u ask because if u are in call and let some other app start while talk (maybe with earphones) its quietly impossible use portrait mode because left hand always cover light sensor and screen shut down.. its the same with that app?
Did someone already found a solution? I would like such a option too. wake up only by centerbutton for instance....