Hi to All,
I've been playing around with ROM's, cooking my own etc but there's one thing I can't get right..and that's getting a theme to correctly load..
At the moment in the OPeratorPKG folder, I am modifying the line in config_operator.txt and changing the HTC.tsk to the one I want ie
EXEC:\WINDOWS\cusTSK.exe \WINDOWS\WM Black 6.1.tsk then of course adding WM Black 6.1.tsk into the same folder.
But the theme never quite loads properly?, when you tap start the drop down menu is still green??
The only way to get the theme to look correct is to re-select it under Settings/Today
plus I can not get the top and bottom bars to go jet black.
I tried adding the following line to config_operator.txt and adding into the folder Glossy Black Bars.exe
EXEC:\WINDOWS\Glossy Black Bars.exe
but on hard reset, I get an error saying Glossy Black Bars.exe not found? - even though it is correctly installed in the windows directory??
Is there a correct or better way to ensure my phone hard resets to the correct theme I select during the cooking process??
Cheers
John
My (long) method
I had this problem when I was cooking - every time I set cusTSK to install a theme it coloured the bars but left the home screen screen with the Windows green circles.
The only way I found to fix this was to replace the wm61_stwater file in the SYS/base_dpi_96_resh_240_resv_320 folder in the kitchen with the one from the theme I wanted. If you take the .tsk theme, rename the extension to .cab and then you can use a cab editor to extract the stwater and put them into the kitchen. The only problem is that this also changes the background on the inital screen alignment and other setup screens, so I had to change the blankbanner.96.gif, myinfo.96.gif and complete.96.gif files too to avoid the initial post-flash screens look a mess!
Good luck, and if there's an easier way, please let me know!!
Stu
Related
I modified some of the Windows Mobile 6 dialer skin files to change the appearance. Somebody correct me if I'm wrong, but it doesn't look like there are any dialer skins for WM6 yet that works 100%. I tried the PaulyA skins, but some of the hardware buttons didn't work right. Anyway since I was doing this for my phone I thought I would see if anybody would be interested in using these as well. I was able to change the background image and buttons. However I was not able to find how to change the size of any of the buttons. Below are some of the screen shots I grabbed. Plus I can list the appropriate files so anybody else can make their own. The only problem I ran into was that whenever I changed the color of a button it gave me those purple corners. So I just need to spend more time in Photoshop to make sure the corners are the exact color the phone needs to make them transparent. But if you make your own buttons then its easier to make the transparent part the correct color.
Opinions?
I'd be all over either of the two black skins you have there...
awesome!!
These look great... ive actually been looking for some dialer skins that work for WM6 i got mb edition running. So what are the files? and if anyone else knows how to make the buttons bigger that would be cool... if u tell me the files.. i can try to edit them in photoshop also. im not a pro.. but i know a thing or two.
I've attached two skins. The Black.zip is the one pictured above that has the white looking rings around the buttons and the Clear.zip has no border. Also the Clear.zip lacks any background. However you can find it in the Black.zip file or use your own.
These two skins are complete and should work in both portrait and landscape modes. Make sure you back up your existing files before hand. You should be able to simply copy the original files directly from the Windows folder on the phone. To install these files on your phone copy them somewhere like your memory card and then use a file utility like Resco File Explorer to overwrite the files in the \Windows\ folder and soft reset.
Here is the list of the files. The naming convention seems to be fairly intuitive. "Port" and "land" designations are obvious. The "up" images are what you see all the time and the "dwn" are what you see when you press them.
--------------------------
dlrback_land.png--------->Background for the dialer*
dlrback_port.png
dlrbtndef_dwn_land.gif--->**
dlrbtndef_dwn_port.gif
dlrbtndef_up_land.gif
dlrbtndef_up_port.gif
dlrbtnend_up_land.gif---->This is the "End" button
dlrbtnend_up_port.gif
dlrbtntalk_up_land.gif---->This is the "Talk" button
dlrbtntalk_up_port.gif
dlrbtn_dwn_land.gif------>The rest of the buttons are the actual number keys
dlrbtn_dwn_port.gif
dlrbtn_up_land.gif
dlrbtn_up_port.gif
*One trick I used for the dialer background was to take the Default_stwater_240_320.gif and Default_stwater_320_240.gif image files from the Windows folder (when using the default theme). Then take them into Photoshop and adjust the color to match your theme. When done save them as dlrback_land.png and dlrback_port.png.
**These dlrbtndef buttons are the ones on the right side that give you your arrow back and speed dial buttons.
I hope that helps. I'd like to see what others come up with.
Any chance of you pulling the files together into .CABs?
Clear and Black CABS
I took the liberty of putting these in a CAB file. You can uninstall these if you don't like them.
I have tested these cabs and they work finr. But I am NOT liable for anything that might happen by using these cabs.
Thanks cyberdrakula! I've never made cab files before.
Flat Black Theme and Dialer
This is one CAB file that has the ALLBlack theme and the black dialer from raceit. You are able to uninstall this if you don't like it and a soft reset thereafter will set it back to default.
If you have installed the CAB file for the DIALERS from the ABOVE POST, PLEASE UNINSTALL IT BEFORE INSTALLING THIS CAB.
This is a BETA release as I still have to figure out why the black background won't set on the reset the first time. The FIX is to select the Allblack theme on "settings/today". You might have to select another theme and and select the AllBlack.
The Dialer graphics are from Raceit and the AllBlack theme is from somewhere in this forum I forget where.
No warranties or guarantees given for anything and I am NOT liable for anything that might happen to you device or should you have a flat tire after installing this CAB.
I wanted to throw up a few more complete dialer skins. Please check the post below for the zip files. (I seriously need to learn to make cab files.)
Here's the dialer skins pictured above.
Here's my first attempt at a cab file. This is the Black v2 in a cab form. Please let me know if this works and I can update the last few I zipped up.
Thanks.
Edit: The Black v2 is on the bottom of the first page in cab form...
http://forum.xda-developers.com/showpost.php?p=1154824&postcount=10
Here's my personal modification that's similar to the blue one Raceit pictured in his first post (4th picture). I wanted a dialer skin that matched the rest of WM6. I tried to match the buttons as close to the taskbar as I could.
Looks nice BBowermaster! What do you guys think of this one? It seemed like a good idea, but I think it still needs something more.
WM6 Theme/Dailer (Wizards/HERMES)
I have created these a Theme & Dailer cab. I am going to do somemore dark themes as I am into them. Any ideas or requests are welcome. Raceit, you're a BAD BAD person as you've got me started on this and it is taking away from a couple of apps (business related) I was working on for myself.
Tested on Wizards & HERMES
-------------------------------
The main dailer graphics I used to create this were Raceit's clear dailer files. The main reason I turned this into a cab was for it to be able to uninstallable in case you want to.
I still have to figure out why the theme won't set on the reset the first time. The FIX is to select the cyberdrakula theme on "settings/today". You might have to select another theme click OK go back & re-select the cyberdrakula theme again.
No warranties or guarantees given for anything and I am NOT liable for anything that might happen to you device or should you have a flat tire after installing this CAB.
Can someone please make a cab of Raceit's blue dialer? I would be very thankful.
I just updated my post on the first page for the blue skin so its a cab file now.
Sorry about that Cyberdrakula!!
Hey people, what reg keys and dlls are concerned with skinning the dialpad and pin entry pad??
I wish I knew. Although a member that goes by the-equinoxe asked about a tapres.dll file. I don't know if he's on to something or not.
http://forum.xda-developers.com/showthread.php?t=296246
White Background
Any idea why my background is staying white, I have tried several different cabs and even copied the black background, but it stays white. The background files are black, dlrback_land.png and dlrback_port.png, so I don't know what is going on.
robjae said:
Any idea why my background is staying white, I have tried several different cabs and even copied the black background, but it stays white. The background files are black, dlrback_land.png and dlrback_port.png, so I don't know what is going on.
Click to expand...
Click to collapse
Couple questions... Is it also white when you switch the phone to landscape mode? Also if you browse to your Windows folder and open up those two files are they the correct looking images or all white?
I have a question hopefully somebody can answer for me. I just flashed Duttys wm 6.1 fixed from April 16th, and then I added the wm7.tsk which is the blue theme for the today screen, does anybody know how I can get the dialer to match it? when I open up the dialer the screen is grey/black along with the buttons but the upper and lower bars are blue. I want the background to match the today screen and I have literally been searching for 2 hours and cant find anything. I have found a couple of cabs that say blue dialer skin but they dont work so any help is appreciated.
xtremdremz said:
I have a question hopefully somebody can answer for me. I just flashed Duttys wm 6.1 fixed from April 16th, and then I added the wm7.tsk which is the blue theme for the today screen, does anybody know how I can get the dialer to match it? when I open up the dialer the screen is grey/black along with the buttons but the upper and lower bars are blue. I want the background to match the today screen and I have literally been searching for 2 hours and cant find anything. I have found a couple of cabs that say blue dialer skin but they dont work so any help is appreciated.
Click to expand...
Click to collapse
You would need to modify the dialer images. You can find one of the dialer cabs & extract it to see the names of all the button & background image files then you'll need to either create new images that match, size wise, or use an editor to modify the images.
modify:
\windows\blue_Dialer_Bkgnd_Land.png
\windows\blue_Dialer_Bkgnd_Port.png
and\or
\windows\blue_Dialer_BkgndSK_Port.png
\windows\blue_Dialer_BkgndSK_Land.png
I use the following dialer Its the best match I've found so far. Just install the iphone dialer cab and then copy the contents of the zip file into the windows directory.
http://rapidshare.com/files/109630624/Blueish_Dialer.zip.html
Thanks Ratcom, that is exactly what I was looking for.
As the title suggests i am trying to track down the images/files that contain the lock screen sliders. HTC have modified these files from the original ones i have noticed and these are no longer the easy to find LS_Lockscreen***.png's. I would like to customise them from boring grey an white to something more colourful but i cant find them!! Any help please.
Hey dude!!
Part of the HD2 Crew now lol!!
Id also like to find these things but also the following:
1: what has HTCUSB2PC.png changed to as i hate the green dot when i connect to USB!!
2: Bootup animation: I have the following reg settings:
Code:
[HKEY_LOCAL_MACHINE\Software\HTC\HTCAnimation]
"StartupGif"="\\Windows\\animated.gif"
"StartupWav"="\\Windows\\BootUpHTC.wav"
[HKEY_LOCAL_MACHINE\Software\HTC\StartupAnimation]
"GIFFile"="\\Windows\\animated.gif"
"WAVFile"="\\Windows\\BootUpHTC.wav"
and the files in place, but nothing happens!
3: Change the Splashscreen!! the O2 Banner is really gay, i knew how to change the splash on the diamond by creating bmp, convert to *.nb, add some extra bytes, convert to *.nbh then flash.
is the same possible on the HD2? does it need HardSPL?
4: It seems that there are alot of repeated png's for eg, the comm manager switched use 4 png files which i have customised to grey:
Status_On
Status_Off
Status_On_Disabled
Status_Off_Disabled
etc, but EG: open comm mrg, enable wifi so the comm mgr switch is "Status_On" this will use my custom png i.e. grey. but if you click on the WiFi tab in Comm mgr, you go to the advanced screen and the WiFi switch has turned back to green.
this happens for everything in the comm mgr. where are the other "Green" switches?
Thanks
MG
Im not the biggest fan of bumping but this is annoying me and i fear it was overlooked by someone who might know the answer so BUMP BUMP!!
I am trying to reskin the dialer of an iPaq hw6945. I'm having trouble with the default background. I've tried any number of skins and skinning tools and none seems to change the default blue backround.
My first thought was to simply replace the background image. On the iPaq hw6945 that image is "dlrback_sqre.png". Unfortunately that seems to be a ROM image so even if I change the file attributes, I can't replace it.
Any ideas?
try making the files into a .cab...
How will that help and how would I do that?
I tried to install a couple of different dialer skins, an SPB dialer skin, and one of the DirkGently dialer skins. The former used a PC based exe installer the latter a cab. In both cases they failed to install their backgrounds. The buttons installed just fine but the background didn't change. So I thought I'd "hack in" the background.
So far I haven't been able to do it.
I unsuccessfully attempted the fore mentioned image swap, then I went poking around in the registry.
I found "dlrback_sqre" in two places in the registry. I replace those values with "dlrback_square" the name of my image in the same directory, but that didn't seem to do a thing.
Moved as not theme release.
Sorry... new to the board. I thought this would be the place to post.
Thanks bilbobrian for your help. It lead me in the right direction.
You're right all it took was a signed cab (and a background image with right name) to overwrite the background. I took one of the DG skins opened it with a cab editor and inserted the right file.
When I get some time I may just make a set of custom skins. I already know how to do the calculator, and WM player, although I might just make a skin for Coreplayer which I use more often. TCPMP was a such a great application, I decided to spring for the licensed version.
Hope to see the results of your work!
Good luck
Hi
I was wondering what i takes to change the text color in the startmenu in a WinMo 6.5.x installation.
The registry method with color 39 does not seem to work anymore. I also tried a SK tool but no success either.
Anyone with some tips?
I too have a problem with WM6.5...
I have a HTC Touch Pro II which i have upgraded from the Touch Pro and its a far better phone, but i keep having menu text colour problems...
Basically, i created a theme for my old phone and installed it on my new one and it worked for a few days, then the menu text which started as all white, stated changing to black for some of the icons - not all, but a few days later they are all black, and on my black background its impossible to read...
So i changed the theme, all text again 2 different colours! different theme same thing :S
So went to the MS theme maker software which to cut a very long story short, finally managed to get a theme from the site and saved on my phone!
Success! untill the phone was reset and now its 2 colours again! this really doesn't make any sence...
So 1) why are there 2 different colours setup for the menu text? and is there any software which will let me edit all the colours for themes on my laptop then upload to the phone?
Thanks guys - this is driving me nuts!!!!
I Know This Thread Is Dead But This Will Help People Like Me Looking For A Fix
Here's how to change the Start Menu Text color:
*SAVE A COPY OF THE FILE YOU'RE EDITING SOMEWHERE IN CASE YOU SCREW SOMETHING UP!
1. Extract the file StartMenu_GridScene_480x800.cpr from your Windows directory to your desktop.
Mine includes 480x800 at the end because that's my devices resolution(Touch Pro II). If you have a different resolution, I'm pretty sure it will have that at the end of the file name.
2. Open the file on your PC with Notepad.
3. Find every occurrence of ForeColor="#00FFFFFF". Mine had two.
It might not be 00FFFFFF, but that's hex code for white so it probably will be.
4. Replace 00FFFFFF with whatever color hex code you want.
You can find any color's hex code online through Google.
5. Copy the edited file back into the Windows directory of your phone. Click yes when it asks if you want to overwrite the file.
6. I soft reset, though I don't know if it's necessary. I figure it can't hurt.
7. Check and see if it worked.
I've attached my .cpr in a ZIP file for BLACK Start Menu text. It works on my Sprint Touch Pro II, and it should work for others but it's still not my fault if something goes wrong. If you use mine, STILL SAVE A COPY OF YOUR .CPR IN CASE IT DOES SOMETHING FUNKY!
moved to the right forum, please post in the correct forums.