I am trying to reskin the dialer of an iPaq hw6945. I'm having trouble with the default background. I've tried any number of skins and skinning tools and none seems to change the default blue backround.
My first thought was to simply replace the background image. On the iPaq hw6945 that image is "dlrback_sqre.png". Unfortunately that seems to be a ROM image so even if I change the file attributes, I can't replace it.
Any ideas?
try making the files into a .cab...
How will that help and how would I do that?
I tried to install a couple of different dialer skins, an SPB dialer skin, and one of the DirkGently dialer skins. The former used a PC based exe installer the latter a cab. In both cases they failed to install their backgrounds. The buttons installed just fine but the background didn't change. So I thought I'd "hack in" the background.
So far I haven't been able to do it.
I unsuccessfully attempted the fore mentioned image swap, then I went poking around in the registry.
I found "dlrback_sqre" in two places in the registry. I replace those values with "dlrback_square" the name of my image in the same directory, but that didn't seem to do a thing.
Moved as not theme release.
Sorry... new to the board. I thought this would be the place to post.
Thanks bilbobrian for your help. It lead me in the right direction.
You're right all it took was a signed cab (and a background image with right name) to overwrite the background. I took one of the DG skins opened it with a cab editor and inserted the right file.
When I get some time I may just make a set of custom skins. I already know how to do the calculator, and WM player, although I might just make a skin for Coreplayer which I use more often. TCPMP was a such a great application, I decided to spring for the licensed version.
Hope to see the results of your work!
Good luck
Related
I want the attached picture as the background, with the top and bottom in purple, and the picture to be visible in the start menu as well (I assume this is done by making the start menu transparent).
Unless someone could point me in the right direction of how to do this myself (without buying any software please. freeware only this month )
But for now if someone could do that for me I'd be very greatful
Cheers. GaZ
here you go mate...let me know if you have a prob opening the file. what i did was i used bvrp theme manager, installed it on my unit, then copied the tsk file from the unit's window's folder, and back to my pc's my docs. if you are able to open it; let me know if you want me to change any colors on the theme...here's a screen shot....
oh and if you're using an xda2 you can simply use the picture as the wallpaper and no need for making a theme...
cheers
oops, silly me i forgot you wanted the top and bottom bars in purple... here you go then...but personally i'd go for maroon :wink:
cheers
Go to pocketpc.com and download the theme generator.
Many thanks
And Carlos: I'll look into that software. I wanted to anyway but didn't know where it was. I just wanted this theme doing quickly.
Thanks again
How do you make a theme for ppc 2003?
Does anyone know how to adjust the transparency of an image used for wallpaper?
Go to funnysnake.com and get their free app for making themes.
Hi Robson!
How did you make the theme from the attached pic? Could you post a step-by-step procedure for this? Let's just call it "Theme-making for Dummies"
Thanks!
jabez
Thanks, mindracing
Hi mindracing!
I downloaded the freeware from FunnySnake.com and voila! I can now make my own themes ... in 5 minutes or so!
Thanks for the info ... thanks to this forum!
jabez
Does this work for 2003?
Yes, it does.
to: jabez
hey mate sorry for the late response; it's the weekend and i don't access my office email...which probably warrants my finding a solution to sync when not in the office... :wink:
anyway; i use bvrp theme manager. had it for ages now; bought it when i was still based in hong kong. what i did was:
1) saved the pic posted by gaz (saved as jpeg in any folder of your pc)
2) used bvrp theme manager...but right now you've got loads and loads of options for freeware theme managers
3) theme manager allows you to customize all the settings (e.g. colors, transparency, etc)
4) saved the file
5) normally the theme is in a ".tsk" file; you can see this when you download free themes over the internet
6) i then installed the theme i created into my ppc
7) once installed, i then went to the windows folder of my ppc; located the theme with the tsk file and extracted it
8) placed it on any folder in my pc, zipped it and then attached it in the forum
9) there you go mate
cheers
robson
I modified some of the Windows Mobile 6 dialer skin files to change the appearance. Somebody correct me if I'm wrong, but it doesn't look like there are any dialer skins for WM6 yet that works 100%. I tried the PaulyA skins, but some of the hardware buttons didn't work right. Anyway since I was doing this for my phone I thought I would see if anybody would be interested in using these as well. I was able to change the background image and buttons. However I was not able to find how to change the size of any of the buttons. Below are some of the screen shots I grabbed. Plus I can list the appropriate files so anybody else can make their own. The only problem I ran into was that whenever I changed the color of a button it gave me those purple corners. So I just need to spend more time in Photoshop to make sure the corners are the exact color the phone needs to make them transparent. But if you make your own buttons then its easier to make the transparent part the correct color.
Opinions?
I'd be all over either of the two black skins you have there...
awesome!!
These look great... ive actually been looking for some dialer skins that work for WM6 i got mb edition running. So what are the files? and if anyone else knows how to make the buttons bigger that would be cool... if u tell me the files.. i can try to edit them in photoshop also. im not a pro.. but i know a thing or two.
I've attached two skins. The Black.zip is the one pictured above that has the white looking rings around the buttons and the Clear.zip has no border. Also the Clear.zip lacks any background. However you can find it in the Black.zip file or use your own.
These two skins are complete and should work in both portrait and landscape modes. Make sure you back up your existing files before hand. You should be able to simply copy the original files directly from the Windows folder on the phone. To install these files on your phone copy them somewhere like your memory card and then use a file utility like Resco File Explorer to overwrite the files in the \Windows\ folder and soft reset.
Here is the list of the files. The naming convention seems to be fairly intuitive. "Port" and "land" designations are obvious. The "up" images are what you see all the time and the "dwn" are what you see when you press them.
--------------------------
dlrback_land.png--------->Background for the dialer*
dlrback_port.png
dlrbtndef_dwn_land.gif--->**
dlrbtndef_dwn_port.gif
dlrbtndef_up_land.gif
dlrbtndef_up_port.gif
dlrbtnend_up_land.gif---->This is the "End" button
dlrbtnend_up_port.gif
dlrbtntalk_up_land.gif---->This is the "Talk" button
dlrbtntalk_up_port.gif
dlrbtn_dwn_land.gif------>The rest of the buttons are the actual number keys
dlrbtn_dwn_port.gif
dlrbtn_up_land.gif
dlrbtn_up_port.gif
*One trick I used for the dialer background was to take the Default_stwater_240_320.gif and Default_stwater_320_240.gif image files from the Windows folder (when using the default theme). Then take them into Photoshop and adjust the color to match your theme. When done save them as dlrback_land.png and dlrback_port.png.
**These dlrbtndef buttons are the ones on the right side that give you your arrow back and speed dial buttons.
I hope that helps. I'd like to see what others come up with.
Any chance of you pulling the files together into .CABs?
Clear and Black CABS
I took the liberty of putting these in a CAB file. You can uninstall these if you don't like them.
I have tested these cabs and they work finr. But I am NOT liable for anything that might happen by using these cabs.
Thanks cyberdrakula! I've never made cab files before.
Flat Black Theme and Dialer
This is one CAB file that has the ALLBlack theme and the black dialer from raceit. You are able to uninstall this if you don't like it and a soft reset thereafter will set it back to default.
If you have installed the CAB file for the DIALERS from the ABOVE POST, PLEASE UNINSTALL IT BEFORE INSTALLING THIS CAB.
This is a BETA release as I still have to figure out why the black background won't set on the reset the first time. The FIX is to select the Allblack theme on "settings/today". You might have to select another theme and and select the AllBlack.
The Dialer graphics are from Raceit and the AllBlack theme is from somewhere in this forum I forget where.
No warranties or guarantees given for anything and I am NOT liable for anything that might happen to you device or should you have a flat tire after installing this CAB.
I wanted to throw up a few more complete dialer skins. Please check the post below for the zip files. (I seriously need to learn to make cab files.)
Here's the dialer skins pictured above.
Here's my first attempt at a cab file. This is the Black v2 in a cab form. Please let me know if this works and I can update the last few I zipped up.
Thanks.
Edit: The Black v2 is on the bottom of the first page in cab form...
http://forum.xda-developers.com/showpost.php?p=1154824&postcount=10
Here's my personal modification that's similar to the blue one Raceit pictured in his first post (4th picture). I wanted a dialer skin that matched the rest of WM6. I tried to match the buttons as close to the taskbar as I could.
Looks nice BBowermaster! What do you guys think of this one? It seemed like a good idea, but I think it still needs something more.
WM6 Theme/Dailer (Wizards/HERMES)
I have created these a Theme & Dailer cab. I am going to do somemore dark themes as I am into them. Any ideas or requests are welcome. Raceit, you're a BAD BAD person as you've got me started on this and it is taking away from a couple of apps (business related) I was working on for myself.
Tested on Wizards & HERMES
-------------------------------
The main dailer graphics I used to create this were Raceit's clear dailer files. The main reason I turned this into a cab was for it to be able to uninstallable in case you want to.
I still have to figure out why the theme won't set on the reset the first time. The FIX is to select the cyberdrakula theme on "settings/today". You might have to select another theme click OK go back & re-select the cyberdrakula theme again.
No warranties or guarantees given for anything and I am NOT liable for anything that might happen to you device or should you have a flat tire after installing this CAB.
Can someone please make a cab of Raceit's blue dialer? I would be very thankful.
I just updated my post on the first page for the blue skin so its a cab file now.
Sorry about that Cyberdrakula!!
Hey people, what reg keys and dlls are concerned with skinning the dialpad and pin entry pad??
I wish I knew. Although a member that goes by the-equinoxe asked about a tapres.dll file. I don't know if he's on to something or not.
http://forum.xda-developers.com/showthread.php?t=296246
White Background
Any idea why my background is staying white, I have tried several different cabs and even copied the black background, but it stays white. The background files are black, dlrback_land.png and dlrback_port.png, so I don't know what is going on.
robjae said:
Any idea why my background is staying white, I have tried several different cabs and even copied the black background, but it stays white. The background files are black, dlrback_land.png and dlrback_port.png, so I don't know what is going on.
Click to expand...
Click to collapse
Couple questions... Is it also white when you switch the phone to landscape mode? Also if you browse to your Windows folder and open up those two files are they the correct looking images or all white?
I am looking to replace the upper icons in WM 6.0 with custom ones, the question is are they in the rom (if so cannot edit, right?) or are they in wm somewhere?
I've been slowly going through the system and have not found them yet, any suggestions on where to start?
I have some fantabulous advice on where to start my American amigo.
FIrst, the files SHOULD be editable, they are simply image files under the \Windows directory. I'm pretty sure they all have different names and are not grouped together, but they should be easy to spot (I imagine they will end in a picture format extension IE .bmp .gif etc.
BUT, it is important to note that, like most Windows Operating Systems, the OS doesn't trust you. Therefore, the files are hidden!
If you just have the normal Explorer, I don't know if it has an "unhide system files" choice.
I personally would go download and install Total Commander, Resco Explorer etc, one of which does have that choice.
After that, search that folder and you will find them.
PS I am not rambling, I have actually seen them in there
Cheers!
Thank you for the good start.
I had a feeling they had to be in the \windows\ or \windows\system folder.
Now the auduous task of finding, editing and replacing them, I always hated this part, since my patients is minimal at best.
Thanks again for the quick tip, I'll try to post a screenshot when I get them done.
1xrtt.bmp
1xRTT_sync_PPC.bmp
1xRTT_connect_PPC.bmp
3G.bmp
3G_connect_PPC.bmp
3G_sync_PPC.bmp
battery.bmp
battery_alert.bmp
batteryCharging.bmp
batteryNone.bmp
bluetooth.bmp
callonhold.bmp
datacall.bmp
dataconnection.2bp
EDGE.bmp
EDGE_connect_PPC.bmp
EDGE_sync_PPC.bmp
EVDO.bmp
EVDO_connect_PPC.bmp
EVDO_sync_PPC.bmp
gprs.bmp
gprs_connect.bmp
gprs_sync_PPC.bmp
gprs_connectPPC.bmp
input_kboard.bmp
missedcall.bmp
MissingSIM.bmp
newemailsms.bmp
newIM.bmp
No_Signal.bmp
pen.2bp
radio_lost_signal.bmp
radio_no_service.bmp
radioconnected.bmp
radioOff.bmp
ringerOff.bmp
roaming.bmp
signal.bmp
syncherror.bmp
sysvol.bmp
voicecall.bmp
VOiceCall_icon.bmp
voicemail.bmp
volume.bmp
WiFi_datacall.bmp
WIFI_on.bmp
Wirelessonoff.2bp
NOTE: 90% of these are the logos for the top bar. One or two relate to the input logo at the bottom bar (IE Keyboard and Pen, I believe it is the Input_Kboard and Pen files). One or two others relate to the image you see when you click the sound icon in the top bar and it gives you two sound parameters to adjust, each with a logo at the top. Use your judgement and eyes to decide which is which. Most you will have seen already.
I don't know if this list is complete, I may have missed some. If you find any others in your searches, let us know and I will add them to this list. I needed to make this list anyway as I am trying to cook a ROM for Himalaya and need to know what I can remove. (For example, Himalaya's don't have EDGE or 3G, so straight away there are eight or so logos that can be removed).
Also note that other programs have access to the top bar and may add their own icons, as Messenger (which does not come installed in our roms) did. Perhaps it is only Microsoft programs that can add their own icons, who knows.
PS Good luck, look forward to the screen shots.
PPS Some of the logos I have never seen appear, but I have been in situations where they should appear (IE No SIM card, but the NoSim image never appeared). I find it interesting that while half follow a naming convention, others don't (IE 1xRTT_connect_PPC.bmp and gprs_connect.bmp without the _PPC). I wonder if this has anything to do with it not working.
(Rant over)
Were you ever able to change the battery icons? I was trying the same bmps but they do not change even with a soft reset for me, even tho the file is changed in the directory to my customed one it still remains as the default. Any tips tricks or ideas? My thought is a dll but I'm relatively new to this and am very unsure. Thanks for the tips and hope to hear you have done it or at least figured out a possible way.
I can help you to find the icons
There are include as ressource in DLL and we can replace it
The only icon I can find is the Signal Strength Icon
Any idea ? Do you replace it ?
Sebastien
i really like atts default here. i just dont want that background and can only change it on the home tab. i figure i will just take the default theme, modify the background image and upload it with diamond tf3d config that i have installed to get rid of the att tab and other stuff. thanks!
i installed the cab for manila customizer. did a backup but that didnt help. is there anyway i can rip the theme so i can customize it? no one seems to have it for download. come on! this is the only thing i have left to get my fuze exactly how i want it. (yes i friggin love it and everyone who doesnt thing it isnt the most brilliant phone in the world must have holes drilled in their heads, the damn iphone freaks!)
Check this out dude: http://forum.xda-developers.com/showthread.php?p=2831041#post2831041
Restore the default AT&T theme.
Use mUn Background4AllPages, which will replace the default grey background with a transparent image, allowing the custom background on the Home tab to show through.
http://forum.xda-developers.com/showthread.php?t=432951
mUn Background4AllPages was originally done for the OEM HTC TF3D theme, so there may be side effects since the AT&T theme uses a custom clock. Be sure to read the thread for any extra info.
yeah i tried that. it doesnt work. the background is solid black instead, the clock doesnt work and everything is moved a bit out of place. thanks for trying though.
i found out more how to do it. these files are under weird things named 4a087e41_manila and 5c9aa261_manila and i tried using manilla editor but its just freaking out with errors because the program isnt well written. it would be alot easier if that background4allpages worked. oh well ill just wait for something better. thanks anyways.
Hi
I was wondering what i takes to change the text color in the startmenu in a WinMo 6.5.x installation.
The registry method with color 39 does not seem to work anymore. I also tried a SK tool but no success either.
Anyone with some tips?
I too have a problem with WM6.5...
I have a HTC Touch Pro II which i have upgraded from the Touch Pro and its a far better phone, but i keep having menu text colour problems...
Basically, i created a theme for my old phone and installed it on my new one and it worked for a few days, then the menu text which started as all white, stated changing to black for some of the icons - not all, but a few days later they are all black, and on my black background its impossible to read...
So i changed the theme, all text again 2 different colours! different theme same thing :S
So went to the MS theme maker software which to cut a very long story short, finally managed to get a theme from the site and saved on my phone!
Success! untill the phone was reset and now its 2 colours again! this really doesn't make any sence...
So 1) why are there 2 different colours setup for the menu text? and is there any software which will let me edit all the colours for themes on my laptop then upload to the phone?
Thanks guys - this is driving me nuts!!!!
I Know This Thread Is Dead But This Will Help People Like Me Looking For A Fix
Here's how to change the Start Menu Text color:
*SAVE A COPY OF THE FILE YOU'RE EDITING SOMEWHERE IN CASE YOU SCREW SOMETHING UP!
1. Extract the file StartMenu_GridScene_480x800.cpr from your Windows directory to your desktop.
Mine includes 480x800 at the end because that's my devices resolution(Touch Pro II). If you have a different resolution, I'm pretty sure it will have that at the end of the file name.
2. Open the file on your PC with Notepad.
3. Find every occurrence of ForeColor="#00FFFFFF". Mine had two.
It might not be 00FFFFFF, but that's hex code for white so it probably will be.
4. Replace 00FFFFFF with whatever color hex code you want.
You can find any color's hex code online through Google.
5. Copy the edited file back into the Windows directory of your phone. Click yes when it asks if you want to overwrite the file.
6. I soft reset, though I don't know if it's necessary. I figure it can't hurt.
7. Check and see if it worked.
I've attached my .cpr in a ZIP file for BLACK Start Menu text. It works on my Sprint Touch Pro II, and it should work for others but it's still not my fault if something goes wrong. If you use mine, STILL SAVE A COPY OF YOUR .CPR IN CASE IT DOES SOMETHING FUNKY!
moved to the right forum, please post in the correct forums.