Hi. Just flashed a WM6 ROM onto my Artemis for the first time and it told me I had to upgrade ActiveSync to version 4.5 or higher, so I did just that.
It connects and transfers fine. The problem is that every time I turn on my computer it produces about 3 pop-ups. One is asking me to create a new partnership, another says something about disconnecting from COM port, and something else I can't remember right now.
I also installed it a while ago and it did the exact same thing so I uninstalled it and went back to using an older version wehich solved the problem. Unfortunately I don't have that option now I'm using WM6.
Can anyone help? Anyone had the same problem?
Weird, I've never seen that before.
I have seen similar popups on my laptop from time to time. They read something like ACTIVESYNC COULD NOT CONNECT TO THE COM PORT... and another one DO YOU WANT TO DISCONNECT FROM THE COM PORT... or something like that. I have not really researched this issue, but it seemed to happen only when I had an activesync connection (bluetooth in my case) to my laptop, then just took my phone out of range and left the laptop on so that it went into standby or powersave mode. The next morning I would find a whole bunch of these popups on the screen. I have never seen them after a clean boot of my pc.
Hmmm. Any solutions that don't involve formatting my PC? It's strange how it's only version 4.5 that does it. Are there any newer ones? Like a 4.6 beta or something?
Related
I've recently upgraded my MDAc with the T-Mobile 1.13 ROM upgrade from their website.
Everything else seems to be fine except for ActiveSync, it's very tempremental- I managed to sync up data on the first connection but later that same day, I connected the device again and it doesn't seem to do anything except charge. I don't even see the AS tray icon either.
Anyone else had similar problems (and solutions for it)?
Thanks.
Had same type of problem myself, fix was to shut down Activesync on computer completly and deinstall, the reinstall active sync(3.8.0) connect device and give a new device name.
Ok thanks- I will give that a go.... I've got AS installed on 4 PCs :shock:
Still doesn't work- I remember actually trying re-installing AS on another machine with the same result.
Think I may have to go back to the 1.12 ROM.
Try hardresetting device sometimes it takes more than one go to get it stable!!!!!!!!!
I've tried about 5 hard resets now...
But it seems to work for the first couple of times then no more.
Another thing, I tried installing Card Export again and the icon for that also does not show up on the tray.
Anyone know if it is possible to downgrade to 1.12 with a shipped ROM?
If u get an AS connection that is stable then yes
Just to 'close' the topic; I went back to 1.12 ROM and all seems fine again.
For no apparent reason, Activesync (4.5 5096) of Outlook on my TC (standard ROM see below) has stopped working. Outlook email/contacts/diary not getting synced.
After plugging USB in a message says 'Sync cannot be connected succesfully...try again... and run troubleshooting..'. But Activesync/Help/Troubleshooting/Reporting says there is nothing wrong! Indeed, I can still explore TC and card, sync other software (e.g. Media Player, TomTom Home, eWallet etc).
But I can't get in to the ActiveSync/Options menu to check out the relationship. Have soft reset TC, turned off PC firewalls etc, but nothing helps. Little puzzled because it all worked fine for the past 2 months and I wasn't even playing around when it decided not to work!
Any ideas please?
Thanks,
CI
Touch Cruise
ROM vers: 1.25.405.1 WWE
ROM date: 12/11/07
Radion vers: 1.58.21.23
Protocol vers: 25.65.30.04H
had the same problem some time ago. changed the cable and everything was fine.you could also try uninstalling and reinstalling activesync.
Jackster
Thanks. Cable was OK, but uninstall/reinstall of activesync worked. indeed speeded up activesync and fixed a lot of other minor secondary problems while it was at it would recommend it for all every now and then. strikes me that activesync is one of the those bolt-on bits of MS obeseware that needs regular maintenance?
USB Device not recognized
To mark the anniversary of me posting my original message, all of a suddden and for no apparent reason, Activesync has stopped working again. Bizarre
This time its a little different, I don't get anything except a pop message on PC saying 'USB device not recognized: One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance click on this message'. Which of course I di and it didn't help!
So, I've tried
- un-installing/re-installing Activesync 4.5
- rebooting PC and TC umpteen times
- changed USB port/cable
- tick/untick Settings/Connections/USB-to-PC/Enable Advanced network functionality
- putting the kettle on
Nothing is working (Although the cup of tea was nice
Would really appreciate some help please
Thanks
CI
Help! Really desperate on this one. I have been trying to think why this should suddenly happen. Two things possible:
- During my last succesful sync I received and answered a call. Would this damage registers or something?
- I accidently pulled the mini-USB headphone cable a bit while listening toi music. But the sound is still perfectly OK, and I receive power charge via USB even though it won't connect/sync. And like I said, I've swapped cables/ports.
I've Googled this a lot and most people fix by fiddling with stuff I have already done and praying!
Please. Anyone got any ideas before I too start praying!
Thanks
1. No, it should not. Never heard it did.
2. AFAIK, not reason as long as it charges trough USB port.
Try to delete device from Active Sync while device is not connected. You might need to restart PC.
You'll have to set options again when device is recognised.
This is what I have to do often.
Also, check device name on device itself, it tends to change from time to time for no apparent reason (at least to me). If it changes, it causes following problems to me:
1. Active Sync troubles
2. BT connection to car audio stops working.
Hope some of this will help...
BTW... you have WM 6.0 on it? If so, don't upgrade to WM 6.1... IMHO, WM 6.0 is faster than 6.1 and has less problems with Active Sync...
Bodisson,
Thanks for suggestions. Alas, none work
It looks like I am going to have to hard reset and/or burn new ROM. For those of us who don't do this regularly, this can be a nerve racking experience. However, I was perhaps sweating too much about it for a couple of reasons:
- it seems very few people have anything good to say about WM6.1. Until now I have been pretty happy with WM6.0 and have had 14 months of virtually trouble-free use, so maybe I'll just stick with that. I'm not a power-user, so the vast array of cooked ROMs is rather bewildering. Unless one is rock solid and aimed at non-power end-users?
- I thought installing a new ROM without Activesync was impossible, but I see someone has worked a way to do it via the SDHC card. Well done XDA
So, unless anyone has some further ideas I will just hard reset to WM6.0 and hope for the best. I have this terrible feeling though that my mini-USB port is damaged and I'll get the same bubble of doom even after hard reset.
Thanks
Either do a hard reset back to factory (and hope you can re sync all your stuff with the PC),
OR
Re flash the rom to C Shekar's "b" rom. It really is very good, and transforms the phone. In fact, it is so good that I have finally stopped fiddling with my phone! (and I'm a born fiddler!)
It is very good, and works immediately, but you might need to spend time tweaking it - the must is to install the correct radio.
I've done quite a lot of rom upgrading, so am quite comfortable now with the process. If you want to do it and need a hand, let me know.
Have you tried to verify your firewall? Last time I had some Sync problems was just after updating my firewall that changed settings to default, blocking the Polaris-PC communication.
Have tried disabling all firewalls with no luck.
I've hit a brick wall on this one, but am fearful it will be hard to get device back to working order again if I do hard-reset and still can't sync
Suggestions very welcome
Thanks
New_Wizard said:
Have you tried to verify your firewall? Last time I had some Sync problems was just after updating my firewall that changed settings to default, blocking the Polaris-PC communication.
Click to expand...
Click to collapse
OK, I feel for you on this one!
If you don't want to flash to a new rom (or, re flash to your old one), there is a solution but it involves removing and renaming your Outlook.pst file ... the procedure (which is on this site somewhere) seemed fraught with danger, to me, so i preferred to re flash when i had a similar problem.
Before re flashing, if you decide to, you backup your data using PIMBackup - only your contacts and maybe phone call list, not anything specific to the phone's operating system or software.
Re flash, then restore the data.
Then, Active Sync will see the phone as a completely new system.
Hello.
I asked the forum search about it, but cant find really an helpful answer.
I do have strong problem with Active Sync. Sometimes it works, sometimes it doesnt. Sometimes, I got to install Active Sync new or drop out the device and add it new to get it done.
Button for fast data connection at the Touch Pro is enabled. Working with 4.5.0 and XP.
Can someone please get me a tip?
Hardware Problem?
I had the same problem with my TyTN II which is the reason I switched to Touch Pro.
The problem I could not synch was because of the MiniUSB connector. I had to change the main board twice. So now my wife owns the TyTN II
i solved that problem by changing another usb slot (it didn't work with USB from my monitor...)
Thank you.
I tried all 6 USB Ports and nothing helped.
Also, I tried to disconnect all other USB devices, also enabled and disabled the "Charging while connected to the PC" button.
Any other suggestions?
I also had thrown out the second device I had in Active Sync.
drdurango said:
Thank you.
I tried all 6 USB Ports and nothing helped.
Also, I tried to disconnect all other USB devices, also enabled and disabled the "Charging while connected to the PC" button.
Any other suggestions?
I also had thrown out the second device I had in Active Sync.
Click to expand...
Click to collapse
Have you disabled "advanced network functionality" in Settings>Connections>USB to PC ?
also try reinstalling active sync again...
@Wonkotehsame:
Yes, I disabled this function.
@ yahu:
So I did. Not just one time, many times. Always after reinstalling, it workes. Some time later, I am loosing connection.
Also, if I try to copy larger files like GPS software with appr. 1,4 Gb the transfer to the Memory card stoppes with the failure message: no such file found.
Can this be something along with the Active Sync problem?
I too have problems with this. ActiveSync says phone is set up to sync with a different computer, but it's not.
Still nobody any hint for this problem?
My problem is a little bit diferent...
My vista won't sync with my Artemis, but it syncs with my Glofiish M700..
If i change the PC (OS XP x64), the artemis syncs.....
So, my Vista Notebook is angry with my Artemis... neither USB/BT sync can be done...
Nice to hear that a lot of people have similar probs ;-)
What I have done now, deleted all of my connetions features/partnerships and made all new.
For now (maybe until Monday...) it works, but now I dont get a folder on the desktop of my mobile device. Is this an optional setting? Can someone tell my how to do?
I dont believe that NOBODY has an help for this problem.
As of today, no Active Sync in any ways is possible with my phone. Even not if I make a new installation.
Also; I made sure that all Anti Virus and Firewalls do allow all 3 Active Sync Files.
What can I do else???
Another try for the specialists:
I have copied now my Outlook.pst to a different Desktop, installed there the Active Sync. I worked w/o prob. That means, the problem got to be with the Desktop.
Last try: Who can help?
drdurango said:
Another try for the specialists:
I have copied now my Outlook.pst to a different Desktop, installed there the Active Sync. I worked w/o prob. That means, the problem got to be with the Desktop.
Last try: Who can help?
Click to expand...
Click to collapse
Looks like you are on your way to finding the root cause. I would try the same computer but a different user to see if it is related to the user setting.
This is what I have done last night. 2nd user, installed OL new and also Active Sync.
Nothing. Same problems.
I restarted the Desktop AND the device several times.
Nothing.
But, when I came this morning, it worked the first time.
The second it failed. I will go and purchase a new Desktop for the thanks of Mr. Microsoft!
has anyone found a real solution for this problem?? mmy computer recognizes the phone a a disk drive bt active sync does nothing. any help would be greatly apprecated
I'm getting this too. Sometimes ActiveSync works, sometimes it doesn't. I can't figure out what causes it to work and not work...
Theres only two possible solutions I know of from all I've ever heard of the problem:
1. Settings-->Connections-->USB to PC. Also, I know the prompt asking you if you would like to use as a disk drive comes up if you've set your phone to be read as an sd card reader. If the pop up annoys you, try removing the SD card and trying again.
2. Hard reset.
Sorry if it doesn't seem favorable to you guys.
Hi all,
Here's the thing, my Polaris never worked perfectly in what concerns the USB Sync, most of the times I used to get the "USB Device Not Recognized" message from Windows (BTW I'm using Vista 64 Home Premium) but eventually with no apparent reason it synced.
Last week, in one of these rare occasions when the sync worked, I updated it with the official ROM from HTC to WM6.1. And then looking at the forum and the custom ROMs I've decided to try another ROM.
But since then I've never got to make the sync work again AND when I tried to use the Bluetooth, by turning it ON, now a got a message that says "Error: Problem with Bluetooth hardware". And BT used to work just fine in my old ROM.
I've already looked every possible forum thread I could find, tested it with three different cables (even bought a new one from Belkin), hard reseted it several times and I simply don't know what else to do. I can't even return to the previous ROM since my Polaris won't USB sync.
Any help would be very appreciated. Tks in advance!
have you tried disabling any antivirus/firewall software? if still get the same result i think you may have to install a 32 bit edition of windows
Hi everybody
I have an HTC Fuze (ATT). The ROM I used was NATF v5. series. I tried a couple of days ago to sync it with my computer but it gave me an "USB device not recognized" message. I did a hard reset but it didn't change anything. I changed the "Energy" rom, but I had the same problem. I tried now to sync the phone with another laptop but I have the same message, so something happened with the phone. What I noticed was the fact that actually when I hard reseted, I still had the NATF 5.series screen shot, even if the rom was the energy one. I appreciate each answer as I don't know what I can do more.
Adriciu
adriciu said:
Hi everybody
I have an HTC Fuze (ATT). The ROM I used was NATF v5. series. I tried a couple of days ago to sync it with my computer but it gave me an "USB device not recognized" message. I did a hard reset but it didn't change anything. I changed the "Energy" rom, but I had the same problem. I tried now to sync the phone with another laptop but I have the same message, so something happened with the phone. What I noticed was the fact that actually when I hard reseted, I still had the NATF 5.series screen shot, even if the rom was the energy one. I appreciate each answer as I don't know what I can do more.
Adriciu
Click to expand...
Click to collapse
Had you try other cables Sir?
NATF splash screen will remain there, because when you flash Energy ROM, it didn't contain splash screen, so it wouldn't be replaced.
I tried a different cable, as well as a different computer. On the new computer there was no previous activesync installed. This led me to belive that there is a problem in the registry somewhere, but I don't know what to change. I also installed the Activesync 4.5 several times. on the ald and new computer, but nothing helps. No firewall active.
Adriciu
<- same problem
Anybody has any ideas?
What about using other phones, if it's okay then the problem was on Your phone, vice versa.
In my opinion, to get phone connected, we must have Activesync (for Win XP) or WMDC (for Vista) installed, good cable (original preferred) and good phone condition (H/W or S/W)
Hope You solve it soon Sir.
I have reinstalled the ATT rom, but is still gives me a "USB device not recognized" message. So I think something is wrong with my phone. Is there any way where I can clean up the whole registry and start from a clean fresh phone?
Still not working.
I had a simmilar problem a long time back.... How I fixed it was I deleted that connection setting for that phone in activesync... Then rebooted...Try to connect it then... If it still doesn;t work, UNINSTALL activesync... reboot... reboot again for good measure.. then reinstall it... reboot... Then try to connect again.... a lot of steps, but it worked for me when I put a diffrent on an old phone I had...
OK, some updates. I tried syncing with another laptop and it is not working. I tried doing the same thing with an Apple comp and it doesn't even see it as an usb device. However I tried syncing wifi with my gmail account and it is giving me the following error message: "The configuration on your Exchange server prevents you from synchronizing. Support code: 0x85010004". So I think there is a setting I don't know how to change.