Wakeup display during call - General Topics

I am aware of the EnableFastDormantDisplayDuringCall registry setting, but what I would really like is to be able to wake the display up during a call (it doesn't have to be on all the time).
This is the way my previous SonyEricsson phones worked.
If I touched the screen or pressed a button during a call, the display wakes up.
On the TC, scrolling the wheel would be a nice way to wake up the display without the risk of performing an action by accident.
Thank's for reading! Any hack for this out there..?

There's a program called screen lock by palmarysoft or something like that... maybe that will do it?

Thank's! Seems right, pity it's not free, though.

unless i miss-understand what you want? the power button does it

lol, that was too easy.. I missed that.. Thank's!!

Related

Wakeup display just to show the time when pressing a button

Hi all,
Sorry for the cross-post, but I just realized that this is probably the best forum for my question..
I normally don't carry a watch, so I look at my TC to get the time. I would like this funtionality mapped to one of the hardware buttons:
Wakeup the display and show a big clock for a second or two, then turn off the display again. (Preferably, the device should still be locked throughout this.)
Is there any similar software?
Thank's in advance!
Edit/Delete Message
hi
i have an x7500 and i use the app called slide 2 unlock. that's the iphone program developed for ppcs. what happens is when i press the power button, the screen comes alive and the 2 most prominent features on the screen are the time (large display) and the slide to unlock the device. i then press the power button again or i leave it to power down on it's own. the same thing happens when a call comes through. i have a bt headset and the screen comes alive. but no app can be launched because the slide 2 unlock button will in fact lock the screen. the only way to unlock it is by unlocking it using the slider.
other's in the forum could have other apps as well. but so far that works for me.
just my 2 cents
Thank you very much, Robson!
Based on your description, I'll keep looking for something that will not interfere when a call comes. Thank's anyway, though!
Anyone else with any ideas?
simpan said:
Thank you very much, Robson!
Based on your description, I'll keep looking for something that will not interfere when a call comes. Thank's anyway, though!
Anyone else with any ideas?
Click to expand...
Click to collapse
You can disable the phone options in S2U2 if you want
Thank's, DocteurN! That's pretty close, except if set to 5secs it will turn off the phone after five all the time, not just when Ive pressed the power-button to get the time. Nearly there..
SPB Mobile Shell does this with its now screen. OR SPB Time can do it with its screensaver !
Both must haves anyway imho !
Dave
Thank you dmj1973! I'm trying with the SPB apps now.
The SPB apps are great but there is no keylock, as far as I can see..?
Basically, from sleep mode, I just want to push a button to see the today screen or at least the time for a second or two, without unlocking the device.
Which is exactly what I do with S2U2 - I press the power button, glance at the time, then hit it again... Perfect!

Lock touchscreen during call???

I searched for about 30 minutes before posting this.. in both diamond and touch pro forums and all over here.. I figure this is a common issue, but still found nothing.
Is there any way to lock the touch screen during a call? I keep doing things with my cheek. I've written notes, assigned pictures to contacts, etc.!!! It's getting old. Anyway to fix that???
Press the standby button.
I intsalled the reg edit No_Sleep_Raph this stops the phone going into standby for voicemail or phone banking.
The phone will blank the screen depending on the power settings I have or standbye button.
If I accpet a call I normally press teh answer button and while putting it to my ear press the standby button
That maybe a solution...
I would think they would've done something like the treo phones..
They've got a setting to lock the screen during a phone call until you press a physical button... Or something like that. Worked great.
How difficult it would be to program something like that?
Have you tried this?
http://forum.xda-developers.com/showthread.php?t=425650
I haven't tried that yet. From what I read it seems like it will be good for not answering the phone inside your pocket... I didn't see anything about it locking
during a call... But I may have overlooked that, and I would assume it is one of the settings.
Can anyone confirm whether this program will allow you to lock the screen during a call and allow you to unlock it with a physical button?
Sorry, can't help you with that as it doesn't seem to work with the latest ROMeOS rom but IIRC you had to remove the stylus in order to use the touchscreen.
wrong post, sorry.

One button ONLY to wake up/unlock

Is there a program so that when your screen is locked, you can assign one button only to wake your screen and have access to the unlock slider? Now, if any of the 4 hard buttons are pressed, it brings up the unlock screen. The problem is, when the phone is in my pocket, any one of the 4 buttons, if accidentally pressed, wakes up the screen. Then of course, I hear my phone in my pocket clicking because the heat from my leg is "tapping" the screen. I just want to have the right hard button wake the phone up.
I cant find an option in the settings for this, nor any threads that discuss it.
Thanks.
I really admire you if you're able to slide the slider with the phone in your pocket.
LOL. No, I dont slide it. Just that when in my pocket, when any one of the 4 hard buttons are pressed(accidentally), i have to press the power button to lock the screen again. A pain in the butt. I what the phone to have only one hard button, not 4, that will shut off the screen when the phone is locked.
I'd like it too.
Maybe even some old school unlocking shortcut that uses hardware key combination (e.g. Home + Vol Down), rather than slide.
The Diamond, or was it the HD, had a button on the top to wake the phone up. That was nice because it was hard to accidentally press that button when it was in your pocket.
I use pocketshield for automatically unlocking my phone when the light sensor senses light coming in. An added benefit for this is that when the phone is in my pocket and I accidentally press any button, the screen will automatically shut itself off again after 10 seconds since there is no incoming light. This tool has really made my life so much easier as it gets rid of the stupid slider thing as well; you can use the lightsensor, the motion sensor and an old school sliding mechanism to unlock your phone- brilliant stuff!
Iarapilot might have meant something else indeed. Most of WM6.1-WM6.5 have a tab in the Start->Settings->Buttons screen that allows you to choose which kind of wake-up you need: waking up by pressing the Pw-ON button or waking up pressing whatever button you want. Sudden power-on is very boring, even thought you can't make your device work as you need to slide the screen. But this is a power comsuption anyway and I wonder why previous version had this chance regardless the home screen features. I do want it!!
I think it's a matter of regkeys, somebody of us who's used to "playing" with regkeys should figure out how this feature could be resumed.
Hope you help us!!
Maybe I didnt make my point very well. I just would like to have only the R hardware key, when pressed, wake up the screen so as to be able to slide to unlock. Not 4 buttons, that when any of those are pressed, wake up the screen.
I also have the problem, I only want to have only one key to wake up not other key
Please help us
Since it's free, I add myself to the request queue Having the screen wake up only on powerbutton press could be useful to reduce to 25% the probabilityof screen turning on by accident when buttons are pressed inside the pocket. Battery saver for sure.
Same here. I've been looking for this since I first got the phone! My old kaiser could do this, surely it wouldn't be too hard to implement on the HD2?
edit: nevermind, posted in the wrong thread
I don't think any software can control that as key presses send electrical signals direct to the chip/power unit, where the "power on" circuits reside. What software can do is turn it off again if not unlocked within a specific amount of time, so battery is saved. Screen touches shouldn't be an issue either if using a lock screen.
les_paulde said:
I use pocketshield for automatically unlocking my phone when the light sensor senses light coming in. An added benefit for this is that when the phone is in my pocket and I accidentally press any button, the screen will automatically shut itself off again after 10 seconds since there is no incoming light. This tool has really made my life so much easier as it gets rid of the stupid slider thing as well; you can use the lightsensor, the motion sensor and an old school sliding mechanism to unlock your phone- brilliant stuff!
Click to expand...
Click to collapse
and doesnt create any problem in normal use? u ask because if u are in call and let some other app start while talk (maybe with earphones) its quietly impossible use portrait mode because left hand always cover light sensor and screen shut down.. its the same with that app?
Did someone already found a solution? I would like such a option too. wake up only by centerbutton for instance....

[REQ] A way to desactivate call button ?

I personally never use the hard call button to make a call, and it is still often a source of accidental calls.
I use Exidler's Hd2ProximityScreenOff, so i don't need in theory a screen lock. Very, very usefull. Some accidental calls have been made though.
Here is what i found so far :
- Vangrieg InCall Lock is great, but works only when a call is received.
- Aebutton plus doesn't help for long press on call button.
- I searched on whole registry for "cprog.exe" (The dialer processus) without interesting founds.
I would be so grateful if someone find a way to remove this call function when pressing the button, if possible using with no process in background ...
Why dont you just enable the lock screen that way you cant accidentally make a call when it comes on.
thank for your reply optiknerv.
with hd2proximityscreenoff, I think we are in a new and intuitive way to use phones, something apple did not patent already ! ;-)
we dont need anymore a screen lock, but kind of key lock can be, in very rare cases, useful.
I guess it is impossible to map this button ...
Have you ever tried AEBPlus??
It locks every kind of key - software keys too - and make them addressable to other application
You'll find it on http://ae.inc.ru
Sichroteph said:
thank for your reply optiknerv.
with hd2proximityscreenoff, I think we are in a new and intuitive way to use phones, something apple did not patent already ! ;-)
we dont need anymore a screen lock, but kind of key lock can be, in very rare cases, useful.
I guess it is impossible to map this button ...
Click to expand...
Click to collapse
Why insist to map the button? Screen lock solves your problem. Try S2U2 or TLP. They will make sure you don't press the green hard key by accident. If you use proximity to auto unlock, there is no extra action on your side. The green hard key (and the phone) is locked whenever the phone is in your bag or pocket.
thanks you very much alex. touch lock pro solved my problem and can use well proximity sensor after some settings.

Lock Screen during calls

Greetings all.
Does anyone know of a good way of locking the screen while making a phone call? I've tried proximity sensor, which does not work on my phone. I currently have my time out setting at 15 seconds, but that does not work either. Any help would be greatly appreciated, I'm sick of face dialing/hanging up.
Proximity sensor does not work at all for me, either. I have been begging and begging people on the forum to help come up with a way to remove or disable the huge "End call" button, as I am constantly hanging up on people with my face.
It is the number one suckiest thing about my Hero right now.
oh, i am looking for this kind of software but found nothing
Probably one of the best "answer/hang up" functions I saw was with SIPdroid. Slide up to answer, slide down to hang up. Of course, the data service is not good enough to always use that though.....
I put the notification bar down down, but it seems almost buggy, sometimes the notification bar stays down and sometimes it just moves up by itself again.
Hit the home button to get out of the dialer window...
Nanan00 said:
Hit the home button to get out of the dialer window...
Click to expand...
Click to collapse
And, then, enjoy the vibrations as you move your homescreen icons around with your face.
Why is there so much resistance to figuring out how to either lock the screen during a call or just disable or remove the stupid soft "End call" button?
Is it significantly more difficult than changing the button color or creating a ROM?
doojer said:
And, then, enjoy the vibrations as you move your homescreen icons around with your face.
Why is there so much resistance to figuring out how to either lock the screen during a call or just disable or remove the stupid soft "End call" button?
Is it significantly more difficult than changing the button color or creating a ROM?
Click to expand...
Click to collapse
Home button is cool if you happen to only touch the end call button and never anything else. I personally called a friend and sent 4 blank texts to someone, don't ask me how....
Home button will cause as many problems. Notification bar coming down is the best way I've found....
an even better way. hold the menu button down.
the keyboard is a great shield.
Avalaunchmods said:
an even better way. hold the menu button down.
the keyboard is a great shield.
Click to expand...
Click to collapse
I will try that one. Seems like it could work, thanks.
Well, google is my friend, i don't know why I doubted ye...
Screen Suite does it for me. The app is $1.99, but it has a setting where it automatically locks the screen on calls.
A bluetooth headset negates that problem completely......
muppetman462 said:
Well, google is my friend, i don't know why I doubted ye...
Screen Suite does it for me. The app is $1.99, but it has a setting where it automatically locks the screen on calls.
Click to expand...
Click to collapse
How do you like it? I found it and it seemed kind of bloated with a lot of features I don't need. Does it eat up memory/power?
I am interested....
I don't get why you guys are having so many issues with this, my phone screen locks at the default of 30s when in calls, it has done this as long as I have had the phone.
Nanan00 said:
I don't get why you guys are having so many issues with this, my phone screen locks at the default of 30s when in calls, it has done this as long as I have had the phone.
Click to expand...
Click to collapse
Mine usually does. Unless it thinks I'm pressing things with my face, which keeps it awake.
That is... if my face doesn't end the call by the time the 30 seconds is up. My guess? It's probably the shape of our faces?
I just try to hold the bottom part of the screen away from my face. Once the screen turns off I've never hung up on someone.
mrcharlesiv said:
I just try to hold the bottom part of the screen away from my face. Once the screen turns off I've never hung up on someone.
Click to expand...
Click to collapse
I do this too. It's very annoying.
Avalaunchmods said:
an even better way. hold the menu button down.
the keyboard is a great shield.
Click to expand...
Click to collapse
Hmm another good one! Any keyboard presses do anything nasty? I'm on swype but I wonder if hitting the mic button on the hacked keyboard would do anything annoying.
Thanks for the tip!
My main problem is when my wife calls, and wants to talk to my son. His face is a lot smaller, and well, everything get screwed up when he uses the phone. As for the program, it does have a lot of features, but all I did was have it set to auto-lock on phone calls. I still have my default vanilla lock screen.
Lack of a both a proximity sensor and dedicated screen-off button is this phone's single unforgivable flaw.
I will never again buy a touchscreen device without at least one of these.

Categories

Resources