Related
I have been attempting to add Interenet Calling to Faria's WM6 ROM by adding the necessary files and registry changes and re-cooking the ROM but I am getting nowhere fast. I have managed to add some files to the original ROM, make a couple of registry changes fine and change some settings in the initflashfiles.dat file to remove some shortcuts I don't want and I can get this to work fine, however re-adding the IP Phone stuff is a bit more of a task.......
I have extracted the files (or modules) from the MB ROM and added the regsistry changes and the ROM cooks just fine. When I flash the Wizard though it completes sucessfully and then reboots. I get the 1st splash screen but then when the 2nd splashscreen should appear I get a white screen. The Wizard is working as I can hear the bleep when it asks you to 'tap the screen to set up the device'. It also powers on and off OK, but I only ever get this white screen.
I have tried this about 4 times now and I am convinced the registry changes and required files are correct, but each time I get this white screen. Any ideas?
Andy
http://forum.xda-developers.com/showthread.php?t=290786
Read this... especially towards the end.
trojan9x said:
http://forum.xda-developers.com/showthread.php?t=290786
Read this... especially towards the end.
Click to expand...
Click to collapse
Already read it..... I can get Internet Calling back if I launch the VoIP.CAB that is included in that thread after installation, however I want these to be integrated into the ROM like they were originally (Faria has removed them). As I said I have had some sucess with adding other files and other registry changes it is just this bit that I am stuck on.
I did manage to get a bit further but ended up with a corrupt Today screen, no idea what happened there though
Andy
What are you stuck on?... you said you didn't have it, but now you said you can get internet calling... what exactly are you trying to do?
Faria has said that his rom takes up almost the entire space alotted. Have you tried removing some files from the rom to clear up room for the VoIP files?
trojan9x said:
What are you stuck on?... you said you didn't have it, but now you said you can get internet calling... what exactly are you trying to do?
Click to expand...
Click to collapse
I want to restore the Internet Calling option in Faria's WM6 ROM - pretty simple to understand really
I can add it manually via the VoIP.cab file but this obviously takes up RAM and can be removed via 'Remove Programs'. I would like to add the files that are missing and make the necessary registry changes then re-cook the ROM. I would prefer to keep Faria's base ROM.
I haven't tried removing anything from Faria's ROM so far, I didn't realise it was near the limit - I thought we had 128MB to play with on the Wizard, are we near that already?
Andy
Listen.. that cab only does registry fixes and puts in the NECESSARY files for the current voip functionality. it does not install anything that is not needed. Extract the cab and look at the xml file. it will tell you exactly what it does...Pretty simple concept
trojan9x said:
Listen.. that cab only does registry fixes and puts in the NECESSARY files for the current voip functionality. it does not install anything that is not needed. Extract the cab and look at the xml file. it will tell you exactly what it does...Pretty simple concept
Click to expand...
Click to collapse
Yep, already done that, hence my original post.....
I have added the necessary registry changes/additions and proof-read them several times, however once the ROM is cooked and installed the thing reboots, I get the 1st splash screen OK, then the white screen when the 2nd splash screen should appear and that's it.
I will have a look at how bloated the DUMP directory is with the additional files in there and see if I am going over 128MB.
Andy
The DUMP folder is apparently 122MB (128,512,401 Bytes) but is taking up 132MB (139,141,120) on the disk on my PC. Does anyone know if this is too big? If it is what is safe to remove?
Thanks
Andy
Done it.......
If anyone is interested I managed to get Internet Calling back into Faria's ROM.....
What I did originally was correct, however the file (or modules) that are needed for Internet Calling total about 3.5MB, which I think was slightly too much and would make the ROM bigger than 128MB (I think Faria must have realised this when developing his ROM and removed them to save space). I have been through the installed applications and files and have removed some stuff that I don't use. I then re-built the ROM and low and behold it worked first time and Internet Calling is now an option...
It still doesn't work however but that is just because it needs a provisioning XML file from a provider. Hopefully when WM6 devices appear we will be able to extract a provisioning XML file and dig deeper........
And no, the ROM is not available since this is Faria's work and not mine.
Andy
Nice,
I’m new to this and the only thing that I need from WM6 is the “Internet Calling”
I have no ides how to make the voip work. But I fond this at Microsoft.
http://msdn2.microsoft.com/en-us/library/ms898226.aspx
I really would like to test this with my “asterisk server” (http://www.asterisk.org/)
/joad
Where did you find the "Internet Calling total about 3.5MB" module?
Or maby you have changed your mind and feel like chairing your ”build” of WM6
joad said:
Nice,
I’m new to this and the only thing that I need from WM6 is the “Internet Calling”
I have no ides how to make the voip work. But I fond this at Microsoft.
http://msdn2.microsoft.com/en-us/library/ms898226.aspx
I really would like to test this with my “asterisk server” (http://www.asterisk.org/)
/joad
Click to expand...
Click to collapse
I have exactly the same intentions, joad. I've got wm6 on my O2 XDA mini so I can try and connect to my Asterisk server as well!
Let's hope his eventually works.
N
joad said:
Where did you find the "Internet Calling total about 3.5MB" module?
Or maby you have changed your mind and feel like chairing your ”build” of WM6
Click to expand...
Click to collapse
You need to add the following files into the ROM (the 1st 3 are actually modules and are in directories with the same name):
dnsapi.dll
rtcdll.dll
voipphonecanvas.dll
ipdialplan.xml
ringback.wma
You also need to add the registry entries to the default.hv and user.hv that are contained in the '_setup.xml' file from the VoIP.CAB file (or extract them from another ROM that already contains Internet Calling).
HTH
Andy
joad said:
Where did you find the "Internet Calling total about 3.5MB" module?
Or maby you have changed your mind and feel like chairing your ”build” of WM6
Click to expand...
Click to collapse
Joad,
I agree with you. The 3.5 Mb footprint is inflated.
It's only 1.75 MB (remember if you are using recmod when you are unpacking the ROM with viewimgfs, you have two copies of the files that are stored as modules: the module version and a file copy!.
--eluth.
eluth, I knew that somebody out there would have done the right job. Congratulation! Would you mind making your rom available to us?
Thank you
Gio2003
Pleaaaaaaaaaaaaase !!!!!!
There are so many people wanting to do this now - and I have a MAJOR need for this on a Hermes -- I have a solid SIP provider and can get to it with my other apps but integration I can't test ---
I am trying soooo hard to pin this down. I have not found a single ROM yet that has the "complete" add-in of what you mention here.
It would be GREATLY APPRECIATED.
Thanks
gio2003 said:
eluth, I knew that somebody out there would have done the right job. Congratulation! Would you mind making your rom available to us?
Thank you
Gio2003
Click to expand...
Click to collapse
ckolibab said:
There are so many people wanting to do this now - and I have a MAJOR need for this on a Hermes -- I have a solid SIP provider and can get to it with my other apps but integration I can't test ---
I am trying soooo hard to pin this down. I have not found a single ROM yet that has the "complete" add-in of what you mention here.
It would be GREATLY APPRECIATED.
Thanks
Click to expand...
Click to collapse
This .CAB worked on my Wizard with Faria's WM6 real thing ROM that had the VoIP stuff removed:
http://forum.xda-developers.com/showpost.php?p=1147821&postcount=138
I then added the files and registry settings back and re-cooked the ROM.
HTH
Andy
Is there instructions on creating a post-flash (or hard reset) install script? I'd like to have it run the cingular WAP cab, and maybe a couple others. I think I've been all over, but haven't seen anything...
Thanks!
Also - does anyone have a package or cab for camera 3.3???
Hi Matt... there are a couple of options...
First off, you could go the route that Faria does in his kitchen - effectively an Extended ROM folder under Windows. When the ROM install has finished and you've done the screen align, it runs the Extended ROM contents - just like the customisations you get in most operator ROMs. The advantage of doing it from a subfolder under Windows is that it works for G4 users as well as G3.
The other alternative is to actually flash your Extended ROM (this is what I've done, as mine is G3).
With the right files in Windows and Windows\Startup (CheckAutoRun.exe and CheckAutoRun.lnk respectively) and the registry entries set up for the appropriate location (I can tell you what these need to be), it will run no problem.
Is this what you're looking for? Faria also has a nice couple of utils that run during customisation and let you choose which operator's settings (GPRS and MMS) you wish to install. I guess these just run the appropriate CAB file based on your choice.
I am happy to help you set this up if it would be of assistance, having spent the last couple of days trying to get all this stuff up and running.
JoelC said:
Hi Matt... there are a couple of options...
First off, you could go the route that Faria does in his kitchen - effectively an Extended ROM folder under Windows. When the ROM install has finished and you've done the screen align, it runs the Extended ROM contents - just like the customisations you get in most operator ROMs. The advantage of doing it from a subfolder under Windows is that it works for G4 users as well as G3.
The other alternative is to actually flash your Extended ROM (this is what I've done, as mine is G3).
With the right files in Windows and Windows\Startup (CheckAutoRun.exe and CheckAutoRun.lnk respectively) and the registry entries set up for the appropriate location (I can tell you what these need to be), it will run no problem.
Is this what you're looking for? Faria also has a nice couple of utils that run during customisation and let you choose which operator's settings (GPRS and MMS) you wish to install. I guess these just run the appropriate CAB file based on your choice.
I am happy to help you set this up if it would be of assistance, having spent the last couple of days trying to get all this stuff up and running.
Click to expand...
Click to collapse
It sounds like your first point is what I was looking for - but up till now I've avoided adding / manipulating the extended rom to prevent issues related to it's use. I guess I'll have to cross that bridge sooner than later!
Is there a "howto" anywhere on it? I'd like to add the option for users to select post installation packages to run, in a nice and "foolproof" way - such as themes, WAP cabs, or whatever. Kinda like "drop your post install cabs in this folder" and it'll go ahead and add them during the rom build, then execute the install after flashing.
Thanks!
mattk_r said:
It sounds like your first point is what I was looking for - but up till now I've avoided adding / manipulating the extended rom to prevent issues related to it's use. I guess I'll have to cross that bridge sooner than later!
Is there a "howto" anywhere on it? I'd like to add the option for users to select post installation packages to run, in a nice and "foolproof" way - such as themes, WAP cabs, or whatever. Kinda like "drop your post install cabs in this folder" and it'll go ahead and add them during the rom build, then execute the install after flashing.
Thanks!
Click to expand...
Click to collapse
search lol i'll try and dig it up for you since i should probably do the same thing
try this of course editing it to where you want it to point:
Code:
[HKEY_LOCAL_MACHINE\Comm]
"AutoRunCFG"="\\Extended_ROM\\config.txt"
"AutoRun"="\\Extended_ROM\\autorun.exe"
notyourdaddy said:
search lol i'll try and dig it up for you since i should probably do the same thing
try this of course editing it to where you want it to point:
Code:
[HKEY_LOCAL_MACHINE\Comm]
"AutoRunCFG"="\\Extended_ROM\\config.txt"
"AutoRun"="\\Extended_ROM\\autorun.exe"
Click to expand...
Click to collapse
I just found this link that has an extended rom in it. It makes a lot of sense, especially the txt file that directs the installation and then initiates a reset. Getting warmer!
http://forum.xda-developers.com/showthread.php?t=309922
So here's what I'm thinking - just initial thoughts:
Have a folder with the base applications that are used every time like AutoRun.exe.
The user places the cab(s) in the "add files to ext rom" folder.
They run an exe that reads the directory file contents, verifies file type, copies the files to the extended rom folder, and displays the list. I'd write it in VB, since I'm most comfortable with file system operations in that language...
They change the list based on the order they want them installed using up and down arrows to sort priority.
The click OK, and it creates the config.txt file, including all necessary commands such as reset and whatnot.
That way when they build, it's all good to go.
Any thoughts?
Slightly off topic but does anyone have a .CAB for TomTom6 (or know how to edit/make one) that doesn't require user input during the installation?
I am not looking for a hacked version of TomTom, just how to prevent it asking me where to install. .CABs that run from the Extended ROM can't ask for user input or it will crash the extended ROM installation as we know; I just don't know how to edit the ttn.cab to stop it asking.
Thanks
Andy
Hi Matt,
It does sound like the first option is the best - it's also the only way to get G4 compatibility. I think your idea to write a VB app is a good one - let the user choose which CABs to install to ExtRom, but I think u need to be very clear what you want to achieve. As this `ExtRom` is not actually in the proper extended Rom, but just a folder under Windows, you gain nothing really by installing programs from here, best just keeping it for operator specific settings and such.
The other issue with extended Rom installations, of any type, is that the config file must run to completion. if you put in cab files that require user input, the install will fail (at least from a proper extRom, maybe ok in this scenario, I don't know); likewise cabs that require or initiate a soft reset will cause an ExtRom install to crash. So, this sorts of limits what cabs can be used. mine puts in personal reg settings; no operator settings as I use wifi not gprs or mms.
Also - and I hope I'm not out of line here, or misunderstanding you - Faria has something that does exactly what u need in his fake ExtRom... u cld always ask him nicely for use of it, or r u looking forward to the coding?
My only other thought is the extra support burden a complex fake extrom scenario would generate, especially if ppl don't understand its purpose and stick stuff in that causes problems...
I hope this has made some sense - past my bedtime and I'm knackered LOL. Just my 2 cents, y'know?
Good work and all the best
JoelC said:
Hi Matt,
It does sound like the first option is the best - it's also the only way to get G4 compatibility. I think your idea to write a VB app is a good one - let the user choose which CABs to install to ExtRom, but I think u need to be very clear what you want to achieve. As this `ExtRom` is not actually in the proper extended Rom, but just a folder under Windows, you gain nothing really by installing programs from here, best just keeping it for operator specific settings and such.
The other issue with extended Rom installations, of any type, is that the config file must run to completion. if you put in cab files that require user input, the install will fail (at least from a proper extRom, maybe ok in this scenario, I don't know); likewise cabs that require or initiate a soft reset will cause an ExtRom install to crash. So, this sorts of limits what cabs can be used. mine puts in personal reg settings; no operator settings as I use wifi not gprs or mms.
Also - and I hope I'm not out of line here, or misunderstanding you - Faria has something that does exactly what u need in his fake ExtRom... u cld always ask him nicely for use of it, or r u looking forward to the coding?
My only other thought is the extra support burden a complex fake extrom scenario would generate, especially if ppl don't understand its purpose and stick stuff in that causes problems...
I hope this has made some sense - past my bedtime and I'm knackered LOL. Just my 2 cents, y'know?
Good work and all the best
Click to expand...
Click to collapse
That's really good info, because I'm climbing the learning curve as fast as I can here to get a good grasp on what the extended rom is, as well as how to use it. I appreciate the conditional warnings... better to know ahead of time than find out following a problem.
I'd rather use the true extended rom (as I understand it anyway), so I don't loose any additional space for the BuildOS programs. That is, assuming the extended rom is a seperate memory location than the base...
In another thread, someone is going to post that tool. I'm really interested in how it works.
If I can get all the concepts together, I hope to get a solid tool that will improve functionality in the ROM, without adding complexity or trouble... and I greatly appreciate the help!
Interesting thread...guys, you just gave me some new ideas.
Before that...there's one thing that's bothering me...
Can we use ExtendedRom on a G4 or not...lol I thought not, until me an Boto made a clean one from a G4 ExtRom and when Boto flashed it it worked , and he has a G4. Why we always say that we don't use an Extended Rom for G4 users ?
Normaly, a G4 should/would brick when flashing IPL/SPL not Extended Rom, am I right ?
We are shrinking the OS space to integrate features of the ExtendedRom in order to all people use it but is it that true ?
Ok, now back to my idea .. I want that in my next rom to include an extended rom, of course and make it that way so when you first start your PDA, it will act like when installing windows on the PC , asking you which apps or what options you want to use. I think i can manage to do that...still the question remains ...will G4 users be able to use it ?
Sorry for the delay writing back... I've been over in the G4 subforum trying to find out if they can flash Extended Rom. Some ppl have reported success using Faria's tutorial. Hopefully this is the case - what u said about IPL/SPL flashing is right, this seems to be a real problem, but if u can flash a radio-only Rom, why not Extended Rom?
What did u and Boto flash onto his G4? Blank Extrom or a cooked one?
Perhaps what we need is a guinea pig to try this out for us...!
JoelC said:
Sorry for the delay writing back... I've been over in the G4 subforum trying to find out if they can flash Extended Rom. Some ppl have reported success using Faria's tutorial. Hopefully this is the case - what u said about IPL/SPL flashing is right, this seems to be a real problem, but if u can flash a radio-only Rom, why not Extended Rom?
What did u and Boto flash onto his G4? Blank Extrom or a cooked one?
Perhaps what we need is a guinea pig to try this out for us...!
Click to expand...
Click to collapse
I took the Ext Rom from the Wizard Love Rom and i edited the config.txt and deleted cabs ...that's it
Well, if it flashed OK... sounds like it might be usable after all But tell me, is Boto's G4 CID locked or unlocked? It's all very uncertain, but some of the G4 posts lead me to believe this may make a difference
ADB100 said:
Slightly off topic but does anyone have a .CAB for TomTom6 (or know how to edit/make one) that doesn't require user input during the installation?
I am not looking for a hacked version of TomTom, just how to prevent it asking me where to install. .CABs that run from the Extended ROM can't ask for user input or it will crash the extended ROM installation as we know; I just don't know how to edit the ttn.cab to stop it asking.
Thanks
Andy
Click to expand...
Click to collapse
All I did for TomTom is install as normal and then copy the Navigator directory and My Documents\TomTomto my storage card where the maps, postcodes etc. are located. After any ROM upgrade all I need to do is create a shortcut in the start menu pointing at \Storage Card\Navigator\TomTom Navigator.exe No user input needed other than to pair the bluetooth gps and define a serial port.Hope this helps, it has worked for me after every change in ROM which has been quite a lot recently.
wizzzard said:
All I did for TomTom is install as normal and then copy the Navigator directory and My Documents\TomTomto my storage card where the maps, postcodes etc. are located. After any ROM upgrade all I need to do is create a shortcut in the start menu pointing at \Storage Card\Navigator\TomTom Navigator.exe No user input needed other than to pair the bluetooth gps and define a serial port.Hope this helps, it has worked for me after every change in ROM which has been quite a lot recently.
Click to expand...
Click to collapse
Thanks for that but it isn't what I was really after.... I am just trying to automate everything. I have flashed my ROM that many times recently and going through the install of TomTom each time is a bit of a pain. I have got a couple of .CABs in the Extended ROM OK and these work fine, I just thought it would be nice if I could get TomTom in there as well.
Andy
I didn't want this to turn into a "how-to" thread, but I'm still scratching for hard info on the extended rom, and as many questions out there, it might be a good one to clarify some details...
As I understand it now, there's two forms of "extended ROM":
1. The true extended rom "similar to the radio ROM"
There is some "trigger" that runs the contents of the extended rom, such as AutoRun.exe?
2. The 'psuedo' extended rom that is basically a post install script to run cabs.
The contents of the folder under windows are run from a trigger that resides in the startup folder - similar to a runonce in Windows on first boot?
Does this sound close?
Also, where does the 'true' extended rom reside? Does it use the portion of memory reserved for the OS, or is there another portion just for it? (so if by adding applications to the extended rom, your available storage memory will remain unchanged - less the installed application?)
I'm presuming then by the 'psuedo' extended rom, that it does consume ROM space, but simplifies post-flash cab installations - assuming you follow the rules...
From what I see, by using the 'psuedo' ER, you waste space by keeping the installation files in addition to the installed application files.
If I'm wasting space and time by asking these questions and you know of a good extended rom tutorial, please direct me to it. I have spend some time tonight searching, but a definitive guide still eludes me... Thanks!
Sorry, coming into this thread late, but you have seen this thread, right?
http://forum.xda-developers.com/showthread.php?p=968417
While it may not directly answer some of the questions, the tools and info in the tutorial may shed some light on this subject (or give you a direction to start digging further).
mfrazzz said:
Sorry, coming into this thread late, but you have seen this thread, right?
http://forum.xda-developers.com/showthread.php?p=968417
While it may not directly answer some of the questions, the tools and info in the tutorial may shed some light on this subject (or give you a direction to start digging further).
Click to expand...
Click to collapse
OMG, I'm getting senile... I came across this months ago, but at that point didn't know what I was looking at... and didn't see it just now in any stickies... thanks man.
mattk_r said:
OMG, I'm getting senile... I came across this months ago, but at that point didn't know what I was looking at... and didn't see it just now in any stickies... thanks man.
Click to expand...
Click to collapse
Yeah, never figured out why that one was never made a sticky. I just know to go look at Faria's sig and it (and a few other good links) are in there
So today before work I installed the Kavana 6.1 rom onto my Dash. Awesome with the exception of the keypad not being mapped the way i was used to. So I read forums about this and decided to download the t9 mapping. I unzipped the files on my computer and transfered them into a newly created folder inside of the windows folder....thats where things went bad. Now when I hit the start menu no icons load up, only the name of the program or application, and when i attempt to select it, i am prompted "error opening the shortcut or locating the filename. In essence the only thing I can do on my phone is text, call, or utilize any feature which is on the home screen. The worst part is I cannot syn to my computer as the usbstorage.ink is under the start program I screwed up royally, and I could use some insight from anyone who might be able to help me. Thank you in advance.
sabiandrums3 said:
So today before work I installed the Kavana 6.1 rom onto my Dash. Awesome with the exception of the keypad not being mapped the way i was used to. So I read forums about this and decided to download the t9 mapping. I unzipped the files on my computer and transfered them into a newly created folder inside of the windows folder....thats where things went bad. Now when I hit the start menu no icons load up, only the name of the program or application, and when i attempt to select it, i am prompted "error opening the shortcut or locating the filename. In essence the only thing I can do on my phone is text, call, or utilize any feature which is on the home screen. The worst part is I cannot syn to my computer as the usbstorage.ink is under the start program I screwed up royally, and I could use some insight from anyone who might be able to help me. Thank you in advance.
Click to expand...
Click to collapse
Was the file a zip or a cab?
On further inspection I found that you can sync the phone from the home screen, so I tried installing the Kavana rom again, but it keeps saying there is no device connected. It shows up on "my computer" as drive F. You can explore folders on it and such but I would ultimatly like to figure out how to redownload this OS, and not screw it up lol. Again any help is greatly appreciated
dashmaster1000 said:
Was the file a zip or a cab?
Click to expand...
Click to collapse
It was a cab, but the unzip option was there so i did... is this my original error?
sabiandrums3 said:
It was a cab, but the unzip option was there so i did... is this my original error?
Click to expand...
Click to collapse
Yea! Its cool though! You can go into settings and select clear storage instead of re-flashing and it will restore it to new ROM state and much safer then just copy paste the cab file into you device or storage card and click on the cab and it will install and do all the work for you! A cab is just a program that is sett up to install itself! Biggest thing to learn here is, dont be discouraged, read alot and learn as much as you can about your device! I started with a Dash and moved on to a Wing, now I have a Tilt running on T-Mobile! And i I remember correctly, I unzipped and installed a cab once too!
Now I am starting to cook my own ROMs and its only been a few months! Sorry. Ramling. Just wanted to encourage you! Hope I helped you out!
dashmaster1000 said:
Yea! Its cool though! You can go into settings and select clear storage instead of re-flashing and it will restore it to new ROM state and much safer then just copy paste the cab file into you device or storage card and click on the cab and it will install and do all the work for you! A cab is just a program that is sett up to install itself! Biggest thing to learn here is, dont be discouraged, read alot and learn as much as you can about your device! I started with a Dash and moved on to a Wing, now I have a Tilt running on T-Mobile! And i I remember correctly, I unzipped and installed a cab once too!
Now I am starting to cook my own ROMs and its only been a few months! Sorry. Ramling. Just wanted to encourage you! Hope I helped you out!
Click to expand...
Click to collapse
Your post is definitely inspiring me, unfortunately I cannot access the clear storage feature from the home screen, its one of the things i need the start menu for. I know theres got to be a way around this... but at least i learned something new about cab files!
sabiandrums3 said:
Your post is definitely inspiring me, unfortunately I cannot access the clear storage feature from the home screen, its one of the things i need the start menu for. I know theres got to be a way around this... but at least i learned something new about cab files!
Click to expand...
Click to collapse
No problem, just do a hard reset, same as clear storage! Click this link and follow intructions!
http://www.mobileviews.com/blog/2008/05/12/hard-reset-my-t-mobile-dash/comment-page-1/
Oh and dont worry! This guy makes it seem worse than it is, its perfectly safe!
Here is another link, more thorough!
http://www.good.com/faq/17957.html
dashmaster1000 said:
No problem, just do a hard reset, same as clear storage! Click this link and follow intructions!
http://www.mobileviews.com/blog/2008/05/12/hard-reset-my-t-mobile-dash/comment-page-1/
Oh and dont worry! This guy makes it seem worse than it is, its perfectly safe!
Here is another link, more thorough!
http://www.good.com/faq/17957.html
Click to expand...
Click to collapse
Thank you Dashmaster! its getting late here on the East Cost so im going to try this tomorrow and ill post what happens...again thank you so much!
sabiandrums3 said:
Thank you Dashmaster! its getting late here on the East Cost so im going to try this tomorrow and ill post what happens...again thank you so much!
Click to expand...
Click to collapse
You are very welcome! Glad I could help!
dashmaster1000 said:
You are very welcome! Glad I could help!
Click to expand...
Click to collapse
so i got ansy and couldnt wait for the morning....I hard reset the device, and everything worked perfectly! Better still I installed the cab and now I have a sweet new OS which looks and functions amazing, and now has the full keyboard working! I can see why you have chosen the posting name that you did thanks a bunch and happy holidays!
Some ROM chefs post a list of what they have cooked into their roms, some don't. But if I like a certain application/software cooked in and I don't know the name, like for example a battery meter that looks cool, how do I find out what it's called to get a cab of it on my own? This brings me to a point, is there a way to decompile a ROM and get a list of pre-installed/cooked applications, and then from there either find a cab for that particular application or make your own from the ROM you just decompiled? Just wondering, sorry if this has been posted already. Thanks.
Reverse engineering is what we do here in XDA LOL. Anyhow, if you like something, go to explorer and look for file name u think it might be! Its a WAG, but it works, and then go to the link in my sign and search! Good luck.
Yeah well I tried searching for it via explorer, no luck finding it lol. Thanks however. Plus I would want the version number on the app too. Is it possible to decompile a rom and get a list of installed apps? Like the chefs post when they release?
Short answer is yes, as a ROM contains a collection of various packages. Grab any one of the kitchens and give it whirl.
What happens if the rom I want to decompile doesn't have its kitchen released?
Use dumprom, however I think youre best shot is to use the ROM tread and ask there.
kickindrummerkid said:
What happens if the rom I want to decompile doesn't have its kitchen released?
Click to expand...
Click to collapse
No worries, most any kitchen can dump a ROM. ImgfsTools is actually what you seek, but the kitchens paint a bigger picture if you're not already familiar with the cooking process.
Ok so I dumped the rom however, how do I tell out of all the dll's and exe's in "dump_imgfs" folder which one is the battery icon OEM. Also, how do I make a cab out of it?
There isn't going to be a big, flashy "This is the battery monitory" sign.
Your first step would be to guess, based on the names of the files. Something that includes "Bat" and "Mon" is a great candidate. Put your guesses in google and see what you find.
If that doesn't work, you're gonna have to guess based on some other criteria. For example, MS will often set the operating system DLLs to the same date. If that date was preserved when the ROM was cooked, you can eliminate all the OS ones and google the rest.
Now, there's 2 methods that may be a lot easier and get you a faster response:
1. PM/email the author of the ROM and ask. Be polite and thankful, and let them know you appreciate their work.
2. Google "Windows CE Battery Monitor" and look through the results.
I found out by looking up an OEM package for another battery and found out the registry settings for it and went to my registry on my ROM and found out what DLL it pointed to. Then I created a CAB and flashed a new ROM and then installed the CAB and it worked . However, is there any way to edit the DLL and change how it looks? I tried hex editing but that's no luck for a picture.
kickindrummerkid said:
Ok so I dumped the rom however, how do I tell out of all the dll's and exe's in "dump_imgfs" folder which one is the battery icon OEM. Also, how do I make a cab out of it?
Click to expand...
Click to collapse
Now that you have figured out the details. Can you please write step-by-step procedure how new ones in this arena can accomplish this?
hi.
everytime i install a new ROM (every couple of days) i need to install around 5 cabs on the new ROM.
is it possible to package those cabs into 1 cab that will install them all?
how do i do this?
this is a great idea
would be great as a back to install all you apps in one go..
dvdscr said:
hi.
everytime i install a new ROM (every couple of days) i need to install around 5 cabs on the new ROM.
is it possible to package those cabs into 1 cab that will install them all?
how do i do this?
Click to expand...
Click to collapse
Never mind 5 cabs, I have 80 or so programmes on my TD2, mostly in cab format, some .exe's and some manila! This is an excellent idea. It takes me half a day to flash a single rom.
mitsi said:
Never mind 5 cabs, I have 80 or so programmes on my TD2, mostly in cab format, some .exe's and some manila! This is an excellent idea. It takes me half a day to flash a single rom.
Click to expand...
Click to collapse
80!
Come on give us a list, what am i missing out on
I have 252 cabs installed in main storage, why my device is so slow?
Just joking
Ok, ok - I deserved that
http://forum.xda-developers.com/showthread.php?t=524224
udK talks about 'autoinstall'
Marco2009 said:
http://forum.xda-developers.com/showthread.php?t=524224
udK talks about 'autoinstall'
Click to expand...
Click to collapse
and this is good only for guys that uses the UDK ROM.
i remember in the past when the manila was just release and composed from 12 cabs, someone archived all of them to 1 cab and then i could install them at once, i wonder how to do it myself.
I am looking forward to the answer too!
I don't know. But I have an idea........
Use Winrar to unrar the files in the cabs.
Put all the files from the cabs in one folder.
Make one big cab file from that folder.
Good luck and do it on your own risk!
would it really be that simple ?
take a look in here
http://forum.xda-developers.com/showthread.php?t=366337
thanks to sleuth
there is 'UC' and there is 'sashmi' (spelling could be wrong) - but for me the most easiest seems to be using the feature of SKTools - I have to admit though, have not used any of them...
I think, here is solution for you. And youtube link with video.
That looks like the business, has anyone tried it out yet?
I would but got everything I need installed at the moment, don't think installing a cab or two would test it!
Certainly looks the simplest solution, no text/config files to change.
the thing I think sounds nice with SK is - it creates cabs from installed programs (including settings made stored in ini-files or registry settings) - although this I guess would not be good when changing ROM-languages or doing huge version-jums with WiMo.
I am thinking about this as I would like to change my ROM again - guess as soon as I find something suitable I will go for a combination of SK and Install Express.
Steeve24 said:
That looks like the business, has anyone tried it out yet?
I would but got everything I need installed at the moment, don't think installing a cab or two would test it!
Certainly looks the simplest solution, no text/config files to change.
Click to expand...
Click to collapse
so finally i've tried it with three cabs and works well