Related
Hello I have done all the Faria tutorial and got it unlocked and IPL AND SPL 3.08, but when I tried flashing a WM6 rom the process stuck at 6% and the update program gave me a "conection failure" error and then started a step by step recovery process... I have done it and now i´m with the 3 colors screen (red green blue) but I´m trying to flash a rom to it without success. why is that? can someone help me?
you need to read this thread
http://forum.xda-developers.com/showthread.php?t=314646
I hope you weren't flashing with vista. I think it requires the shell tool.
no, no vista.
I have followed EVERY instruction in the VIPPIE: http://forum.xda-developers.com/showthread.php?t=298613 and FARIA tutorials, the problem was that when flashing it gave me a connection problem at 6% and then is not stuck in the bootloader screen. I hope my phone is not damaged since i´m in brazil. But I´ve tried several roms without success... they say problems with version OR with connection. Why can that be?
it stays a long time in "verifying the information on your PDA phone..." and then it returns those errors I´ve mentioned.
flash the stock Cingular ROM from HTC's website it will flash for you from the RBG screen
http://www.america.htc.com/support/8125/software-downloads.html
n3rxs said:
flash the stock Cingular ROM from HTC's website it will flash for you from the RBG screen
http://www.america.htc.com/support/8125/software-downloads.html
Click to expand...
Click to collapse
thank you man!!! I will try that right away!!!
n3rxs said:
flash the stock Cingular ROM from HTC's website it will flash for you from the RBG screen
http://www.america.htc.com/support/8125/software-downloads.html
Click to expand...
Click to collapse
man, you are a life savier!!! worked flawlessly... now does I have to unlock the cid again or can I flash a Wm6 rom right away??
fscussel said:
man, you are a life savier!!! worked flawlessly... now does I have to unlock the cid again or can I flash a Wm6 rom right away??
Click to expand...
Click to collapse
Once unlock...always unlocked unless you reversed the procedure.
If your flash of a custom rom fails again, your device is probably not CID unlock and you need to go thru the unlocking process again.
ok after fixing the problem with the n3rxs help I´ve flashed the Wizard Love rom to prepare to flash a WM6 rom. The Wizard love rom i´ve used has a Italian instalation program, is that right? after I installed it the cell phone keeps reestarting I can´t do anything in it, it only loops restarting... what´s that?
found the solution, had to keep the camera button pressed and then reset the device so it enters in BootLoad mode then I flashed a original cingular bios and after that upgraded to WM6 without a glitch!!
Hi everyone,
I think I may have bricked my Kaiser. I've been following some similar threads but nothing seems to be working to fix the problem.
I was going through the process to flash a new Rom, starting with installing HardSPL following this thread I was. I was having problems, I think because I have the 1.82 ROM version.
Finally, I thought I had HardSPL installed, so I continued to run KaiserCustomRUU.exe. This completed (jumped from 0% to 100%) very quickly. However, I reset my phone and it is now stuck in the tri-color bootloader screen
The screen has the says:
KAIS130
SPL-1.82.0000
CPLD-8
and has the letters RUUNBH in the top right corner.
I've tried removing the battery and resetting, but the phone always goes back to this screen. I've also tried running mtty, but without success. The command 'readconfig' returned a result 'Command error !!!'.
does anyone know of anything else I can try?
Small bit of good news: if I issue the command 'boot' using mtty, my phone boots into my original ROM successfully, with the mtty output:
InitDisplay: Display_Chip=1
No card inserted
OSSIReadBack ++
Read SI data from flash success
tail signature match
Checksum match
UserStorageSIPreload ++
It takes a long time to boot (like a couple of minutes), but it does eventually boots up fine. When I reset, I'm back at the tri-color screen though
If your at the tri-color screen, just reflash a new rom
Im not an expert but when its at the tri colour screen, try to flash Hard SPL again, it should pick it up and flash i believe.
If that goes through ok, then do the same to flash another ROM.
Again no expert at unbricking but its definately worth a try
japher said:
Small bit of good news: if I issue the command 'boot' using mtty, my phone boots into my original ROM successfully, with the mtty output:
InitDisplay: Display_Chip=1
No card inserted
OSSIReadBack ++
Read SI data from flash success
tail signature match
Checksum match
UserStorageSIPreload ++
It takes a long time to boot (like a couple of minutes), but it does eventually boots up fine. When I reset, I'm back at the tri-color screen though
Click to expand...
Click to collapse
Try this.
1.) Open ActiveSync and navigate to File > Connection Settings - Uncheck Allow USB connections.
2.) Download this ROM http://rapidshare.com/files/5781641...dio_sign_22.45.88.07_1.27.12.11_Ship.rar.html and flash it to your device.
That should work for you.
hi alltheway. thanks for the advice!
I don't want to sound ungrateful, but are you sure the above is safe? I just don't want to make a wrong step now and totally screw up the device (now that I can successfully do a manual boot using mtty).
I know you can't guarantee it but is this what others who are stuck in the bootloader have done?
japher said:
hi alltheway. thanks for the advice!
I don't want to sound ungrateful, but are you sure the above is safe? I just don't want to make a wrong step now and totally screw up the device (now that I can successfully do a manual boot using mtty).
I know you can't guarantee it but is this what others who are stuck in the bootloader have done?
Click to expand...
Click to collapse
I had this problem about 2 weeks ago.
I was flashing one of Dutty's Great ROMs and I lost power at the house and shut down my computer when I was 46% done.
I had the same RUUNBH in the top right hand corner. All I did to fix this was flash a factory shipped ROM like the one I provided to you and it worked great. No issue thus far.
Honestly I can't gurantee 100% if this will totally fix your problem but I am 95% sure.
Unless some other users have an answer for you I think this will be your best solution. Regardless of what you do you will have to flash to a new ROM anyways.
Also, I'm a bit dubious on whether i will be able to flash to that ROM. I don't think I have the right HardSPL installed to flash roms (see what my boot-loader screen says in the first post).
I'm no expert though.... obviously
Thanks for all the info alltheway. I'm too tired now (will probably f*ck the thing up even further! ), so I'll try flashing this tomorrow.
Here's some more info I've collected using mtty (my phone is an O2 XDA Stellar):
Code:
Cmd>info 2
HTCSO2___001¯JG±HTCE
Cmd>getdevinfo
GetDevInfo: Get CID OK
HTCSKAIS1300O__0HTCE
New Thread
Read this:
http://forum.xda-developers.com/showthread.php?t=355910
Hi tqm. I've been following that post but as far as I can tell there is no solution there yet.
From what I can tell from that thread (and others), the only way stop the phone booting to the tri-color screen (in RUUNBH mode) is to flash with a ROM that matches the vendor. I think because I haven't been able to install HardSPL properly, my phone's version of SSPL will only load O2 ROMs (could be wrong here, but that's the picture I'm building ). Unfortunately no-one seems to have extracted the ROM from an XDA Stellar :\
I believe alltheway's solution above worked for him because he had HardSPL installed properly. He could load the stock ROM to fix the phone, because his SSPL version allowed different ROMs to be loaded. I'm not certain of this, and I'll probably try his suggested solution when I get home today... but I'm not too confident.
If only there was an mtty command to just get the phone out of 'RUUNBH' mode. I've seen the command 'task 8' mentioned on here, but it doesn't work when I try it. Does anyone know of a list of mtty commands for the Kaiser anywhere?
Definitely flash the original ROM, it will get your device to the default HTC shipped state.
Then sync phone with ActiveSync, install HardSPL again and then flash custom ROM.
I remember i had the same issue but the original rom is a lifesaver
You mean the original HTC ROM? or the original O2 ROM? (what my phone originally came with)
If I don't have one of the HardSPL versions posted on the forums (I believe they never installed properly, which is what caused all my problems I think), will I still be able to flash the stock HTC ROM:
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship.exe
Basically my questions is: is this stock HTC ROM flash-able to ALL kaisers? (even without downloading/installing HardSPL from the forums)
If not (i.e. I can't flash even the stock HTC ROM), is it expected that if I can't successfully install HardSPL, my Kaiser will only accept O2 ROMS?
japher said:
You mean the original HTC ROM? or the original O2 ROM? (what my phone originally came with)
If I don't have one of the HardSPL versions posted on the forums (I believe they never installed properly, which is what caused all my problems I think), will I still be able to flash the stock HTC ROM:
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship.exe
Basically my questions is: is this stock HTC ROM flash-able to ALL kaisers? (even without downloading/installing HardSPL from the forums)
If not (i.e. I can't flash even the stock HTC ROM), is it expected that if I can't successfully install HardSPL, my Kaiser will only accept O2 ROMS?
Click to expand...
Click to collapse
IMHO the HTC stock ROM should work even without HardSPL, at least for me it worked fine... but just for sure have your O2 stock ROM by hand.
jaso2005 said:
Im not an expert but when its at the tri colour screen, try to flash Hard SPL again, it should pick it up and flash i believe.
Click to expand...
Click to collapse
I don't thinks there's a way to flash HardSPL on tri-color scrren so far, coz activesync cannot connected to computer
the best way is trying to find the phone's offcial ship rom to flash
No luck trying to flash with the stock HTC ROM:
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship.exe
After getting to 1%, it reports an error:
Error [294] : Invalid Vender Id
As suspected, looks like this will only accept an O2 ROM Will have to wait until one is available.
Did you try installing HardSPL and then reflashing?
the stock HTC rom will not load onto your kaiser simply because it is still CID locked to O2's CID code. You HAVE to find the O2 rom that your device came with or any O2 ROM and reflash that and you will be good to go. You may also try and flash HardSPL but I dont think its going to work. But remember have a friend or someone on the forum dump and rebuild the O2 rom for you and just reflash the OS.nb or ROM only no radio!
It is very simple to dump and rebuild a rom so if you have a friend that has a kaiser have him over for an hour and dump his
thats your only shot at this point.
URPREY said:
Did you try installing HardSPL and then reflashing?
Click to expand...
Click to collapse
My current ROM version is 1.82. I don't think installing HardSPL has been solved for this ROM version, which I think is where all my problems started. I have tried, but no version of HardSPL (that I've found) will install correctly.
austinsnyc said:
You HAVE to find the O2 rom that your device came with or any O2 ROM... just reflash the OS.nb or ROM only no radio!
Click to expand...
Click to collapse
Thanks for the reply austinsnyc, this is what I'm hoping to do now, I'm watching this thread 'Has anyone dumped the o2 Stellar rom yet ?' closely Maybe I should reconstruct the ROM myself, I'm just a bit worried about arsing that up as well I'd rather someone experienced reconstructed and verified the ROM (on a phone that isn't already messed up).
Out of interest, would you be able to give me a succinct explanation of what is actually wrong with my phone at present? As far as I can tell, the only problem is that the boot-loader is stuck in RUUNBH mode. Has part of the ROM on the phone actually been destroyed?
I'm assuming right now that the point of flashing the O2 ROM is just to make the phone 'finish' a flash and get out of RUUNBH mode. Or is it actually to re-instate something that has been lost?
If it is to reinstate something that's at present lost, is this data definitely part of the os.nb?
If it's just to get the boot-loader out of RUUNBH mode, I'm REALLY gutted that there isn't just a mtty command to do this
Oh yeah, and perceptivepixel.com Ace!
Hi,
If i have to keep my original ROM as backup to use in case of serious failures, like i am only able to boot up to boot loader and avoid INVALID VENDOR ID (294) error to reflash sucessfully this ROM. (without using USPL)
do i need to do:
1. create part00.raw, part01.raw and part02.raw using pdocread of exiting phone ROM
2. rename .raw files to .nb
3. run Dutty nbh tool and then???
What i have to provide in:
IPL, SPL, First Splash, Second Splash, OS, Ext. ROM, Radio, Device, CID Type, version, langauge, Signature?
4. Produce RRU_Signed.nbh and use it to flash with ROMUpdateUtility
Am i doing right?
Please help!
Thanks in advance
You really don't need to dump your ROM! Most of the official ROMs are available. Tell me your original ROM and I'll give you a link to it!
frauhottelmann,
I asked this because i came across this situation recently when i mistakenly upgraded my HTC S710 ROM with ORANGE UK latest ROM and in last it said corrupeted. After that i tried every things but it got only stuck at boot-loader.
From bootloader, i tried every ROM from FTP xda but everytime it was INVALID VENDOR ID or Corrupt ROM image. and worst part was; i could not use USPL.
If i would have my original ROM with me, i could have come out of this.
I had to pay some bucks in cash to HTC service and then i got it corrected. They simple put my original ROM in it, nothing else.
Thats why i asked if i have to dump my unique ROM to avoid INVALID VENDOR ID, how can i do this?
frauhottelmann,
Sorry to disturb you, can u help me on this?
So do you have an HTC S710 or the Orange version of it?
its HTC S710
And now the original HTC ROMs don't flash properly? I gues the problem was the orange ROM, if you don't flash ROMs other then HTC (or cooked - they don't use an own SPL) then this should not be a problem any more. If you flash a Orange ROM, you still have to do USPL first, because it's gonna say "No, this is no Orange phone" BUt then it still might screw up the SPL and your stuck. So just be carefull with flashing ROMs from an specific carrier.
you mean,
if i have original default HTC S710 ROM in my phone and if i try to flash with original HTC ROM like "HTC S710 ROM version 1.34.405.1" from boot loader then i should not get any error.
Also if i have Gonzo or your ROM or similar cooked ROM and try to flash with "HTC S710 ROM version 1.34.405.1" from bootloader i should not get any error.
if i have Orange or similar ROM and try to flash with any HTC ROM, failure everytime
If it is true, it would still give enough relief.
This is what I meant! The same would happen with a Vodafone or Dopod ROM!
i have the Vodafone V1415 (which is the same as the rest of the vatious Vox's) and i recently flashed an orange rom to it and it worked fine
before the orange rom, i had Mr Gonzos 6.1 v1.1, and before that, whichever one came on the device
ive never come across anything like that :S
admitedly after finally getting everything right (after various problems with different things) and the phone worked fine, i then managed to drop my vox onto a soft seat in such a way that it bounced off and the screen broke as it hit the floot
Original Htc S710 Bt Rom
frauhottelmann said:
You really don't need to dump your ROM! Most of the official ROMs are available. Tell me your original ROM and I'll give you a link to it!
Click to expand...
Click to collapse
Can you kindly show me where to download original BT ROM for HTC S710?
You will save me.
YOSEFE
I see. There is no response to my quest.
I now have to send my phone to my SP, to avoid my dead end experience, how do I backup or do a ROM dump for my original ROM?
Cheers.
first of all sorry for y English...
Ive been read the threads about that, but ive this problem:
i ve a hardspl 3.29 and trying to downgrade to original rom the flashing process stops at 15%.
i can install only custom rom and so i cant reverting back to original rom and spl.
ive been tried to flash first the spl but not working...
someone can help me please?
thx!!
wow, I don't think I've ever haleard it this way before. Usually you can't upgrade to a cooked ROM, not the other way around.
So, you get no errors while installing a cooked ROM, but it stops at 15% when trying to downgrade...
I know that some shipped ROMs flash the SPL at 15%, so this must be the problem.
Undortunately, I am a lucky one who has never had anything bad happen to me while flashing (besides my laptop running out of battery), so I don't really have much advice to give you, but I'm sure somebody else will.
Sorry, hope it all goes well for you
HardSPL prevents itself from being replaced. You need to run JumpSPL or SSPL-KAIS on the phone when it is running WM as normal, which will switch you to triciolor screen, where you can flash the original SPL.
This should be detailed in the "How to revert to factory state" page in the wiki.
thx but ive been done all and now my kaiser it's brick on bootloader:
dont allow to flash hard spl
dont allow to flash custom rom
dont allow to flsh original rom
Help PLease!!!!!!!
tried with mtty but nothing...USB PORT CAN NOT OPEN
Try that sticky thread? http://forum.xda-developers.com/showthread.php?t=423486
kilrah said:
Try that sticky thread? http://forum.xda-developers.com/showthread.php?t=423486
Click to expand...
Click to collapse
tried but no chance...
my suggestion is to search this forum for "stuck in bootloader"
you're sure to find something there
mbarvian said:
my suggestion is to search this forum for "stuck in bootloader"
you're sure to find something there
Click to expand...
Click to collapse
now...
solved the stuck problem on bootloaderwith mtty for Vista, but with hardspl it's impossible to flash an original rom on the device (flsh stops at 15% error 226-flash error- wath is?)
so...i want to flash an original rom: waht can i do? help needed please...thx!!!
always prpblem in falshing original update...flashing process stops at 15%. ive downgraded at wm6 with spl 3.07.
ERROR 226
I have an old Prophet that refuses to boot to the Operating system. I see the Orange Logo screen with:
IPL 2.20.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.10.1.22
I don't know if (a long time ago) I flashed a G3 phone with a G4 rom or what (would this be the result????).
I have also tried flashing all sorts of ROMs found on this site and even gone onto WIN 6 but it always halts the booting at this screen...
Can anyone help before this phone ends up in the bin!!!!!!!!!!!!!!
First you must flashed an WM5 Rom. Search for Qtek hier and read so many treads about this prob.
Thanks 4 the reply... I will have a go and see what happens.
I have now re-flashed a Qtec rom and still stuck on the boot screen with...
IPL 2.20.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.20.7.34
Is there anyone out there with any idea how to get this phone back from the dead ??????
You have read the wiki ?
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
You have download and flashed the qtek rom from this side ?
I don`t mean you do that.
NEO130 said:
You have read the wiki ?
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
You have download and flashed the qtek rom from this side ?
I don`t mean you do that.
Click to expand...
Click to collapse
I have followed the instructions on this site to recover my M600 but it STILL refuses to boot up....
I have tried various ROMs ect to no avail............
Can anyone out there resolve this ?????
Don`t cry like a little girl. What rom exactly have you flashed now ?
http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs
Are your battery over 50 % to flash ?
Battery is fully charged and the last ROM flashed was:
RUU_Prophet_220734_2207114_024721_NVID.exe
I have also tried this one:
Original-Shipped-ROMs/OrangeUK/Prophet_Orange_UK_ROM.zip
They both have the same result.
You start your phone - bring it in the bootloader modus -connect to pc - flashed the qtec rom you have - If this doesn`t go, I am on the end to help, and you are the first guy it doesn`t go. Sorry
P.S. Dissable Active Sync - Flash only with XP, no VISTA. No USB Hub - If you connect the device you must see in the left down corner USB and than flash
NEO130 said:
You start your phone - bring it in the bootloader modus -connect to pc - flashed the qtec rom you have - If this doesn`t go, I am on the end to help, and you are the first guy it doesn`t go. Sorry
P.S. Dissable Active Sync - Flash only with XP, no VISTA. No USB Hub - If you connect the device you must see in the left down corner USB and than flash
Click to expand...
Click to collapse
NEO.. I have done this and it will still not boot, maybe it's a hardware problem and it is well and truly "bricked"...
Thanks for your help and replies..... I will keep trying...
I had a similar Problem, have you tried a other ROM without IPL/SPL
xtrafletch said:
NEO.. I have done this and it will still not boot, maybe it's a hardware problem and it is well and truly "bricked"...
Thanks for your help and replies..... I will keep trying...
Click to expand...
Click to collapse
Hello there,
I think I had a similar Problem, once I flashed some signed roms via
softspl (Neo Shadow 1.0), everything went okay till then.
I forgot the missing HardSPL on one of my Prophets and
Flashed with RUU Bikertibis 6.5 23007 wich worked fine
after flashing. Even with no hardspl it worked till flashing
the next rom...bricked.
Stucking in bootloader and even the Shiped WWE Rom with NVID
was not working. Stucking in the 3 color screen.
My Prophet was sold as TC-500 from german telekom,
so it had spl 2.56.001 wich only allowed Roms signet
by the vendor, also the NVID Rom you tried didn't worked.
but i kept trying and flashed RUU_Prophet_220739_2207119_021921_QTEK_GER_Ship_NO_IPL_SPL.exe
don't know why, but it booted up with this rom.
After this i made a HardSPL and everthing is fine now.
if i read correct you have SPL 2.20.0001 so use G4 RUU.
Try flashing on XP X68! It's easier this way.
I use XP64 wich works to. disable powersaving
and everthing else what could interfer flashing.
good luck !