Hi
just flashed my TyTn II with the official HTC WM 6.1 by Updating the HardSPL and am having soft reset issues with it, it des not soft reset until the softreset switch is presed, if it asks for a reset after a software is installed it just shuts off instead of resetting.
Please help
pyk said:
Hi
just flashed my TyTn II with the official HTC WM 6.1 by Updating the HardSPL and am having soft reset issues with it, it des not soft reset until the softreset switch is presed, if it asks for a reset after a software is installed it just shuts off instead of resetting.
Please help
Click to expand...
Click to collapse
This issue has already been reported numerous times already.
http://www.google.com/advanced_search?hl=en
did the search but no help. can u help me?
pyk said:
did the search but no help. can u help me?
Click to expand...
Click to collapse
XDA Developer Search Try that.
tried but cant find any solution
pls help
pyk said:
Hi
just flashed my TyTn II with the official HTC WM 6.1 by Updating the HardSPL and am having soft reset issues with it, it des not soft reset until the softreset switch is presed, if it asks for a reset after a software is installed it just shuts off instead of resetting.
Please help
Click to expand...
Click to collapse
In future, please use either Google Search or the search provided in the forum. Will save, most importantly, you the time and hassle even if you just look through the threads
http://forum.xda-developers.com/showthread.php?t=349375
All issues regarding ROMS/Radios are posted here
pyk said:
tried but cant find any solution
pls help
Click to expand...
Click to collapse
it's a known bug, no solution.
Related
Hello everybody!!!
I need help with my Himalaya... Tried to upgrade it to WM5, successful for a while but after a soft reset, it wont boot up properly. It stays stuck on the Windows Mobile boot screen, with both the bluetooth and power/signal light turning on/off alternately. Hard resetting it does not help, the same symptoms are still happening. I had to reinstall the WM5 ROM several times but the same problem now occurs everytime I have to soft reset the unit. I had to downgrade to wm2003, ROM 1.72.00WWE, Radio v1.17.00, extROM v1.72.181.
Can anybody help me on this? Thanks!
how is it possible to update from wm2003 to wm2005?
www.buzzdev.net
get a rom and
a howto is in the zip
Recover crashed device.
seph1978 said:
Hello everybody!!!
I need help with my Himalaya... Tried to upgrade it to WM5, successful for a while but after a soft reset, it wont boot up properly. It stays stuck on the Windows Mobile boot screen, with both the bluetooth and power/signal light turning on/off alternately. Hard resetting it does not help, the same symptoms are still happening. I had to reinstall the WM5 ROM several times but the same problem now occurs everytime I have to soft reset the unit. I had to downgrade to wm2003, ROM 1.72.00WWE, Radio v1.17.00, extROM v1.72.181.
Can anybody help me on this? Thanks!
Click to expand...
Click to collapse
After upgrade, ensure you clear registry and format the storage. You may try to redo this by following the instructions in the last part of the installation document, as pasted below:
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
Click to expand...
Click to collapse
Also be aware that many backup software can corrupt an installation after recovery, even those that have a "Upgrade or Migration" feature. It is best to use PPCBckpContacts to restore your contacts and to use SMS BackupSoftware for your sms's, both can be found on this forum and both use standard databases instead of proprietary formats that could corrupt the WM5 databases.
on topic: i will have to bookmark this page in case i get the same problem when i upgrade
off topic:thanx rudega, u dnt know how amazed i am...just signed up to the forum cus i wanted to get the WM6 theme for my xda, then it said i needed wm5 so i cried abit, the i saw this post and laughed ha u cant update O2 website havent said anything...then i looked around this whole forum and realised i could. this is amazing really pleased. no more old looking 2003.
that post i wrote ealier must be amusing to all since everyone here knows u can upgrade to wm2005. i kinda regret it being my 1st ever post here.
thnx again. (hope this upgrade business isn't to dificult to do)
wow! lots of great responses to my thread... thanks a lot guys! i will try all the things that you instructed here. i will report what happens... you guys are the best!!!
it is working as of now!!! yahoo! thanks a lot pneuma! i've decided to use chandra shenkar's ROM... it IS a lot faster than the original WM5 that i've previously used. will give a heads up if things go wrong again!
hi i hav KROME NAVIGATOR wit win 2003 ROM version 1.72.00wwe radio version 1.17.00 well i hav tried to upgrade it manny times to wm05 & also 2003se but it gives error.. i used unlocker software from here in dowloads but it says its already unlocked .. plz any1 help me how to flash wm05 on ma PDA... i got it somtime ago.. i also hav a spv c550 smartphone too which i did upgrade to wm059 i used super CID tool to unlock the ROM for Flashin, but i can't get through this one plz help.. it be very helpfull... thanks in advance...
"well i hav tried to upgrade it manny times to wm05 & also 2003se but it gives error"
you may want to elaborate a bit on that
sheesh
Just did a soft reset and the problem just happened again. something must be wrong with my hardware! i had to do a hard reset to get back up again. comments anyone?
wow i remember this post i made month ago. since then my phone broke, was stuck with an acient nokia, no camera, not even a colour screen. luckily im back with a new windows mobile phone. anyway no one is gonna read this, but i thought i should take a trip down memory lane
Friends,
I mistakenly upgraded my HTC S710 with corrupt ROM. Now i am stuck at boot-loader but everytime in get INVALID VENDOR ID, how to bypass this.
I can't run USPL because it does not connect with activesync
skchattha said:
Friends,
I mistakenly upgraded my HTC S710 with corrupt ROM. Now i am stuck at boot-loader but everytime in get INVALID VENDOR ID, how to bypass this.
I can't run USPL because it does not connect with activesync
Click to expand...
Click to collapse
just hard reset your phone. and then try reflashing.
I tried hard reset several times but does not work.
Friends,
is it possible, if i can check vendor ID and somebody expert on ROMs cooking can give me any ROM wih that vendor ID so atleast i can flash it 100% once
Later i will flash it with latest ROM.
Pls help!!!!!!!!
skchattha said:
I tried hard reset several times but does not work.
Click to expand...
Click to collapse
Its strange that are not able to git it through a hard reset. may be ur not doing the hard reset properly. u have to switch it off and then press power key along with the two soft keys for five seconds and then leave the soft keys but not the power key. keep pressing the power key for 5 to 10 seconds and when u see the message press green (call) key.
corrupted rom
most of the roms i downloaded from this site are corrupted, could anyone help me with a good htc s710 rom
Amyral82 said:
most of the roms i downloaded from this site are corrupted, could anyone help me with a good htc s710 rom
Click to expand...
Click to collapse
if so you try looking at http://shipped-roms.com/index.php?category=windows mobile&model=Vox
Amyral82 said:
most of the roms i downloaded from this site are corrupted, could anyone help me with a good htc s710 rom
Click to expand...
Click to collapse
You picked up a 3 year old thread. Which are your problems? Solutions much depend on the state of your device. Just tell as detailed as possible:
- your device
- the boot-status
- what you want to achieve
- what you have tried already
Mind that not all ROMs can be put on all devices (CID lock) so if a ROM does not upload the device it is not "corrupted" - it is just discovered to be "non matching". Cooked/custom ROMs cannot recover from a non-booting device. Starting with the shipped ROMs site is the best approach if you find the original one for YOUR device. If not, then more sophisticated methods may have to apply - depending on your problem.
I am a Newbee and need some help.
My Dopod 818 pro died today. I don't know what happened.
I installed
((RUU_WIZARD_10.2.0.8_2.61.11_PV_FIX2))
And now it wont start or soft reset or even hard reset.
It Only keeps blinking the screen,
can anyone help me here? PLEASE
Thank you.
Staycat said:
I am a Newbee and need some help.
My Dopod 818 pro died today. I don't know what happened.
I installed
((RUU_WIZARD_10.2.0.8_2.61.11_PV_FIX2))
And now it wont start or soft reset or even hard reset.
It Only keeps blinking the screen,
can anyone help me here? PLEASE
Thank you.
Click to expand...
Click to collapse
1. did you really flash a Prophet with a rom for Wizard?
............. too sad,
2. try to recover you rom with NVID flashing and force bootloader method ( if it still can ...)
go here
http://forum.xda-developers.com/showthread.php?t=353547
FORCE BOOTLOADER MODE
not possible
I must be an Idiot. But thanks a lot
Staycat said:
FORCE BOOTLOADER MODE
not possible
I must be an Idiot. But thanks a lot
Click to expand...
Click to collapse
Hello Again
Now I bought a new one .I will take care of this one. and not to make a fool of my self. i will not do anything without asking others first
Staycat said:
Hello Again
Now I bought a new one .I will take care of this one. and not to make a fool of my self. i will not do anything without asking others first
Click to expand...
Click to collapse
how ur old 818 pro?
the housing u selling or not?
Searched the forum but did not find anything, hopefully someone can help:
I upgraded from Tomal's ROM 8.2 to 8.5 and everything went fine. I got the message to do a hard reset which I did. Got the clear storage screen (press 0 to clear) but since I pressed 0 my piece is dead. Cant enter boot loaded, laptop wont recognise it either. Tried reading up on mtty tools but it requires atleast the bootloader screen. Someone please help!!
blingin said:
Searched the forum but did not find anything, hopefully someone can help:
I upgraded from Tomal's ROM 8.2 to 8.5 and everything went fine. I got the message to do a hard reset which I did. Got the clear storage screen (press 0 to clear) but since I pressed 0 my piece is dead. Cant enter boot loaded, laptop wont recognise it either. Tried reading up on mtty tools but it requires atleast the bootloader screen. Someone please help!!
Click to expand...
Click to collapse
At the risk of appearing stupid.....Is your battery flat???? do you have another one to try or tried charging it? Coz I have never heard of this one.
Jay
responderman said:
At the risk of appearing stupid.....Is your battery flat???? do you have another one to try or tried charging it? Coz I have never heard of this one.
Jay
Click to expand...
Click to collapse
took the battery out and kept it for about a day -- when I re-installed it started working -- weird...
Thanks for the suggestion (sorta) responderman!!
blingin said:
took the battery out and kept it for about a day -- when I re-installed it started working -- weird...
Thanks for the suggestion (sorta) responderman!!
Click to expand...
Click to collapse
Glad it helped
How to upgrade XDA Exec from WM 5 to WM6 or 6.1
I am really new to this. Need help on upgrading my XDA Exec, can someone tell me the steps to do it...
Many Thanks in advance
aroaratarun1984 said:
I am really new to this. Need help on upgrading my XDA Exec, can someone tell me the steps to do it...
Many Thanks in advance
Click to expand...
Click to collapse
Welcome to the forum
Please READ here: http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
You´ll find all you need to upgrade to 6.1
Good luck,
i upgraded my o2 xda exec from wimdows 5 to windows 6.1. but now the problem is i can not use my hardware keyboard and the buttons around it. so how can i fix this problem? or is there anywhere i can get a downgrade??
please help...
thank you..
Welcoe to the forum
Try to hard reset before thinking to go back
then flash another rom and by last chance downgrade
more info on the Wiki
Good luck,
i have tried to hard reset but with the keyboard not working... i can not even hard reset. any other solutions... please..
thanks
Have you read the wiki?
flash another ROM
yes i have... not very helpful..
Very strange... can you enter in bootloader mode ??? if yes try to flash another rom...and see if use stable roms like tomal's 8.7 or 8.5... try hard resetting by going to settings and select "clearmemory" it should do a hard reset...