Database Info

Desperate QTek owner.

Hi guys.
I did it... i screwed up my QTek S100! I tried to upgrade it, maybe the wrong files, dunno... now it is *dead* ! I only get a dark screen with "SERIAL V1.00" or "USB V1.00" if docked (should be bootloader mode). Nothing else.
Would you please be so kind as to help me in recovering from the disaster ? I do not have any backup, nor ROMs. I own a 512 MMC.
I would need English Roms... pleeeese !!
Thanks a lot.
Silver

Do you still have the files you used to upgrade? What's the name of the file?
Also, leave the info on your previous ROM.

I had the same problem with my Qtek S100 when upgrading it with the new firmware. The upgrade process stopped/crashed the first time leaving my unit in the same state you're describing. But, what I did was simply to run the upgrade utility again and then it worked fine the second time.
I don't know where you're from but if you have a swedish unit like me you can get the latest upgrade utlity from this adress:
http://www.smartmobile.se/upgrade/upgrade.aspx

Here is my previous (and gone) configuration. It's hard to believe I can't re-flash it again. English ROM is my best wish...
I wish you could help me...
Oh! I have tried all "QTEK ROM WORKS" recent methods. I always get that Country Code Error and I do not saved the previous GetDeviceData output.

slvrbllt said:
Here is my previous (and gone) configuration. It's hard to believe I can't re-flash it again. English ROM is my best wish...
I wish you could help me...
Oh! I have tried all "QTEK ROM WORKS" recent methods. I always get that Country Code Error and I do not saved the previous GetDeviceData output.
Click to expand...
Click to collapse
Looks like the same happened to me. Try to open battery cover (or remove battery for several second. Then put everything back and push Power button. Does it turns on (with hard reset)?

Nope buddy! The OS is gone! Whatever I try to do, it always starts in Bootloader mode (Serial V1.00/USB V1.00).

Try removing the battery for 30 minutes (or whatever time it takes for the backup battery to discharge). That should recover your previous configuration although I haven't tested it.

Thanks for your reply, macrinus, but, exactly, how do you believe the 'vanishing' OS is supposed to reapper ?
We must be talking about spiritism in here...

slvrbllt said:
Thanks for your reply, macrinus, but, exactly, how do you believe the 'vanishing' OS is supposed to reapper ?
We must be talking about spiritism in here...
Click to expand...
Click to collapse
I would like to try upgrading my JAM...but now I`m affraid a little bit... :roll: Have U tried to update with the latest S100 ROM...the swedish one?...or the I-mate JAM WWE ROM...?
Regards,
Primoz

Backup ROM
Is there a way to make a backup of my rom?
I have the qtek s100 with english rom.
Purchased seperate.
rom 1.03.00 WWE
radio 1.05.00 (upgraded)
extrom 1.03.100 WWE
Had the same issue with my radio version upgrade.
Scared the hell out of me ...
Backlight did not lit up ...
And an error apeared on my pc ...
But I was able to upload it when I tried again and the sync program of ms was killed.
If anyone knows how to make a working back-up ...
I like to help.
Think it's interesting to see how everything works.
And ofcourse, if you worked it out already, let me know how ...
And what macrinus said wont work.
When you do a hard reset, you do exactly the same.
So I think it's all gone.

why not dump the os to sd card, ntrw to pc and then put the nb1 fille in the ftp........

Tell me how ...
Tell me how, and I will ...
Sounds like chinese to me buddy.
Just got this pocket pc for 3 days.
First time I use a ppc.
Is that with xbackup?
Then choose all data?
Or do you mean another way?
What is ntrw?
And how do I get it from the backup?
And also, how is he suposed to upload it to his ppc?
Am asking this all to get to know it for myself.
Need the basic information before I can actually do all this ...

ok, sorry, if you are new to this forum, maybe its time now to browse this forum using the "Search" . There are hundreds or maybe thousands really good topics / advices available in this forum, posted by experts.
I and hundreds others I think, have really learn a lot from this forum.
On this specific topic you can search for :
- dump rom
- bootloader / bootloading.
You can also go to this forums ftp : ftp://xda:[email protected]/
to download all the necessary files
pls be patient and enjoy the tour......

AT&T Tilt Stuck in Boot Loader

First off I'd like to apologize for what must seem like a duplication of a thousand other "stuck in boot loader" threads, but I've got what appears to be a fairly unique situation here and none of the fixes I've found searching the forum have worked for me.
Yesterday I flashed Dutty's WM6.1 ROM using JumpSPL, everything went fine. Today I went to install one of Niki's radios using JumpSPL again, but it got stuck at 99%. I went through the recovery process (several times) and each time after that got stuck at 0%. I've tried soft and hard resets, every time it comes back to the tricolor boot loader. MTTY doesn't give me the USB port option, even if I disable any and all tasks related to Mobile Device Center. Stock AT&T ROM won't load, says "This update utility cannot be used for your PDA phone." I can't flash HardSPL, after I hit enter it doesn't do anything. I tried the Vista fix available on Modaco, but it's not compatible with 64-bit Vista so I'm SOL there too. I'm really at wits end here, could someone please point me in the right direction? I've read time and time again here that as long as you still get the tricolor screen your phone is not bricked, but I seem to be all out of options and nothing has helped.
The boot screen displays the following:
RUUNBH (Top right corner)
KAIS1*0
SPL-1.56.0000
CPLD-8
Please, any and all help would be greatly appreciated!

I don't believe JumpSPL is intended for radio flashing. Flash HardSPL and reflash with a shipped AT&T ROM.

I can't flash HardSPL for some reason, when I press enter in the prompt it brings up nothing happens.

Good job there slick! Did you purposefully ignore all the posts about safely flashing your device?
If you don't mind a little berating & a ton of sarcasm, I may be compelled to take an interest in helping you to fix the device (or to see how badly you've f'd it up & if it can be salvaged at least). Anyway, find me on MSN IM if you want & I'll walk you thru the steps for diagnostics & if possible, recovery.
You'll have to promise not to rush into doing any more stupid things though.
MSN/Live IM: ([email protected])
Yeah, yeah, gung ho, help the newbie, man this is getting old.

for I friend
Hi there ...
a friend of my has a same problem with his Vodafone VPA compact V, can I give him your hotmail ?
Or can you my little tutorial ?
thanks in advance .
Srdjank
T- Mobile MDA Vario
owner , when I am big I will have Tytn II

Managed to get it straightened out, for some reason MTTY 1.42 wasn't working properly with my system but 1.16 did the trick- Rebooted through there and flashed HardSPL then loaded my ROM without a hitch. Thank you everyone for being so responsive and helpful!

srdjank said:
Hi there ...
a friend of my has a same problem with his Vodafone VPA compact V, can I give him your hotmail ?
Or can you my little tutorial ?
thanks in advance .
Srdjank
T- Mobile MDA Vario
owner , when I am big I will have Tytn II
Click to expand...
Click to collapse
Ahhh, one more staisfied customer! Glad I could help out srdjank. Just remember that you can't treat a Kaiser like it's a Wizard. Similar yes, but there are different processes for safely flashing.
So far I've seen that Flashing Radios with JumpSPL is a sure recipe for bad memory blocks. Always, ALWAYS, HardSPL!

i also had the same problem when i tried to sim unlock my mda vario iii in progress screen the progress stuck at 95%. i would appreciate any help to recover the phone. thanks in advance

RUU error (262) update error

Hello guys...
Iam not new, and i have already flashed my first(it was wasted not by my fault)KAISER, it was one year ago and i did it with HARDSLPv1, and lately added some new roms cooked by sakajati(respect)...
Yesterday i bought new one(but one year old) so i tried to flash him as well, i have used HARDSPL 1.93, and then i tried to put Sakajati"s 4th feb ROM, but i come across one big trouble, everytime i try to put it on i encounter the same RUU error:
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue. Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
what to do...????
i am very afraid that i destroyed my Kaiser...???
what it means that Wince is destroyed...
Please help me, i am desperate...

Iam not new,
Click to expand...
Click to collapse
But the solution could be found here (search)
If you see the tri color screen everythng is ok, just win mobile is destroyed. Try to flash a rom from your sd card

Thank you very much...
I hope it will work, i really did search for about an hour and tried to put rom on sevral times, but i didnt find nothing 100% secure, i dont want to indanger the unit any more that i did...
thanks again, i will try it tommorow morning at my job, thats where my SD card is...
)))

greganovak said:
Thank you very much...
I hope it will work, i really did search for about an hour and tried to put rom on sevral times, but i didnt find nothing 100% secure, i dont want to indanger the unit any more that i did...
thanks again, i will try it tommorow morning at my job, thats where my SD card is...
)))
Click to expand...
Click to collapse
Part of the problem is that 1.93 is a jump spl and should be used to upgrade to Hard spl 3.29 or 3.56, not as an spl on its own. You need to run jump spl 1.93 from your device and make sure you are connected to your computer, when you see the bootloader you need to unplug your USB, count to 10 and plug your USB back in then flash a hard spl to your phone! Again 1.93 is not a Hard Spl by itself, it is only a middle man to flash a Hard Spl.

I think the best would be to flash a stock rom at first, cause therefore you don't need an other bootloader. Then flash Hardspl (3.29 if you have a kaiser or 3.56 if you have a tilt) and then flash any rom you want

i obviusly have a lot to learn, mate how do I asses if I have TILT or KAISER, what is the main difference...
[email protected]: i have already DL the stock rom before i posted the tread, i hoped on that resolution if there were no answer...
in about 10 hours from now i will get my hands on my tilt/kaiser and hope to arranged the mess i done; I drop by in any case at that time and notify you about condition and my successes...
p.s.:sorry for my poor english...

greganovak said:
i obviusly have a lot to learn, mate how do I asses if I have TILT or KAISER, what is the main difference...
[email protected]: i have already DL the stock rom before i posted the tread, i hoped on that resolution if there were no answer...
in about 10 hours from now i will get my hands on my tilt/kaiser and hope to arranged the mess i done; I drop by in any case at that time and notify you about condition and my successes...
p.s.:sorry for my poor english...
Click to expand...
Click to collapse
It realy doesnt make that much of a difference, I have a tilt and I use 3.29 and I would recomend it to anyone over 3.56 so flash either one, they will both work! And your english is great so no need to say sorry!

greganovak said:
i obviusly have a lot to learn, mate how do I asses if I have TILT or KAISER, what is the main difference...
[email protected]: i have already DL the stock rom before i posted the tread, i hoped on that resolution if there were no answer...
in about 10 hours from now i will get my hands on my tilt/kaiser and hope to arranged the mess i done; I drop by in any case at that time and notify you about condition and my successes...
p.s.:sorry for my poor english...
Click to expand...
Click to collapse
A Tilt is a At$T branded Kaiser, a TyNT II is a HTC branded Kaiser. Tilt has a different keyboard and OEM rom., only differences. People say use 3.56 if you have a Tilt because that is an AT$T Spl, but I use 3.29 on My Tilt and it works great so it doesn't really matter.

hey...
nothing seems to work...
I have tried to put default rom dl from here: http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs but the problem is that it is not bootable from SD, that has to be because the USB conection isnt on (i selected the 3.34.721.2) so i given up that way
Then i flashed the HARD spl 3.29(have kaiser) via SD steb by step first with this instruction: http://forum.xda-developers.com/showthread.php?t=433835; and it dint go through
so i tried with this instruction: http://forum.xda-developers.com/showthread.php?t=420683
it didnt work either, they are the same I know(noticed later);
So problem is that i stuck at WHITE screen that says "LOADING..."
nothig else...???

finally i manage to load/boot the htc rom from xda-wiki site, but i have to chose another one

I have tried to put default rom dl from here: http://wiki.xda-developers.com/index...me=Kaiser_ROMs but the problem is that it is not bootable from SD, that has to be because the USB conection isnt on (i selected the 3.34.721.2) so i given up that way
Click to expand...
Click to collapse
Hey man, nice to see that your device rewakes, you can flash every rom from sd card, simply rename the nbh file to kaisimg.nbh than restart into bootloader and it will automatically take the one from the card

Unfortanly, althought i would like you to be right, you are not. When i tried to do it via SD, i stuck at white screen saying LOADING...(blue) and nothih further... and i tried also the Cmonex_s Hard SPL3.29_SD which also stucks at same screen
So now (after updatig with default rom) that i have basicly normal working device i startet from the top. Using @mskip"[email protected] tutorial called: Flasing your first rom (for noobs); it all goes well, till i start to update RUU(sakajati 4 feb) if it matters, and i tried both (spls 1.56 and 1.93), it stops updatig at 17% and notrhin else then works just puting back the HTC default rom from wikiXDA side(thank god for that)
i am thinking of MTTY, although i dont know what it does guys here almoste all say it fix bad rom flash, but i am not sure if thats my main problem, i rahter think it has something with spls...
if someone has some good advice i will be very grateful...

greganovak said:
Unfortanly, althought i would like you to be right, you are not. When i tried to do it via SD, i stuck at white screen saying LOADING...(blue) and nothih further... and i tried also the Cmonex_s Hard SPL3.29_SD which also stucks at same screen
So now (after updatig with default rom) that i have basicly normal working device i startet from the top. Using @mskip"[email protected] tutorial called: Flasing your first rom (for noobs); it all goes well, till i start to update RUU(sakajati 4 feb) if it matters, and i tried both (spls 1.56 and 1.93), it stops updatig at 17% and notrhin else then works just puting back the HTC default rom from wikiXDA side(thank god for that)
i am thinking of MTTY, although i dont know what it does guys here almoste all say it fix bad rom flash, but i am not sure if thats my main problem, i rahter think it has something with spls...
if someone has some good advice i will be very grateful...
Click to expand...
Click to collapse
Hi,
I couldn´t flash my Kaiser via SD at the first time and tried something that worked.
The SD´s are formatted in Fat16 usually, try to format to Fat32... It seems like a stupid thing, but worked for me.
Reagards and good luck.

SD must be formated FAT32, to work, also I sugest a smal card, 512 or something like that, SHDC usual doesn't work

I have 1GB SD and its not shdc, so thats ok.and i have done it right now, like you two guys said so i formated it with FAT32 but still no succes.
I guess that this tree lines in red/green/blue screen arent right:
KAIS130
SPL-3.02.0000
CPLD-8
i thing this SPL has to da something to do with all this mess a have done
I have flashed a couple of roms( i had three devices) and i flashed a few for my friends and all was OK till now, and i dont know what else to do...

greganovak said:
I have 1GB SD and its not shdc, so thats ok.and i have done it right now, like you two guys said so i formated it with FAT32 but still no succes.
I guess that this tree lines in red/green/blue screen arent right:
KAIS130
SPL-3.02.0000
CPLD-8
i thing this SPL has to da something to do with all this mess a have done
I have flashed a couple of roms( i had three devices) and i flashed a few for my friends and all was OK till now, and i dont know what else to do...
Click to expand...
Click to collapse
Yes, you still have a stock spl on there. It needs to be hard spl'd before you flash anymore. Check out the stickies at the top of the forum.

hi again...
Well, I respect the "rules" of forum, thats why i wouldnt ask for insructions that are already written(thanks for the authors) with that i mean stickys, because i read them, almost all...
But I still tried once again, and I came across the same thing, i stuck at 17% when loading RUU or if i choose the VIA SD i stuck at white screen with blue text saying (LOADING...)...
nothing else helps than loading the dafault ROM by HTC... as i already said once again...
if i manage to solve the problem i will be in touch; what do you thing about MTTY
Edit 1:
i have done everything as it says in the instruction, and just like some of you "replyed" me...
but i always stuck at 17%when loading RUU, when i flash it with SPL 1.56 or 1.93 i never get stuck at white screen it always apeare the mentioned SPLs nimbers and some other text in yellow but when i then load RUUs i stuck at excatly 17% nothing less nothing more
edit 2:
yupi....yupi
i made it...
http://forum.xda-developers.com/showthread.php?t=354061 here is my lifesavior...
those instruction were the one that helped my problem...
it is very nice to ba a part of this community....

Clock problem with imate jama

i know it may sound weird but the clock on my imate jama has stopped working and since it got stuck, i cannot use the power button to turn the device on. However the power button does work while the device is turned on and i can turn it off as well. I have tried soft and hard reset. Please help me out this problem since its warranty expired last month. Does it have like a backup battery cell that needs to be replaced? or is it like a software problem...BTW im running windows mobile 6 on it which i got upgraded from the vendor while it was in warranty...................
Please help...

Wierd, is the clock stuck on a certain time? Are you sure your hard reset was sucussful?
If it definately did a hard reset, i would recomend flashing a cooked rom, or flashing an official wm6 rom.
Use the wiki or relevant forum to see what suits you best.

thanks for replying...yes the clock is stuck at whatever time i either manually change or the time of the last sync with the pc...I dont have any experience with flashing roms but i have found one rom, i guess the only one there is on the net for this device (http://forum.xda-developers.com/archive/index.php/t-393307.html). i couldn't find wiki for imata jama. please help me find the wiki and let me know if there is another rom for this device that i can flash it with aswell...

if i flash the wm6 rom on my jama would it flash since i already have wm6 installed? and i also found a wm6.5 rom.. it has some issues and incase i wana go back to wm6 would it be possible as well? please help me out with this...........

hey the 6.5 rom was here as u probably know ; http://forum.xda-developers.com/showthread.php?t=492981&page=3 but seems buggy as you say. You'll have to look on imate website to see if you can download original wm6.0 for your phone as i cant see it on here.
I dont know if you can flash magician roms to ur fone, they are similar hardware and lots of threads asking about jama end up in magician? i dont know....
id stick with 6.0 if you cant find anything else.

Thanks so much marsh for ur help... imate has the worst customer support ive come across therefore i'm planning to switch to htc.. i have done some extensive research and found that the 6.5 rom on that chinese site is being constantly updated with new versions coming out every now and then..and the good news is that im downloading a stable version of WM6.1 for me imate as i type.. I will post it at here at xda after i successfully flash it...
fingers crossed

Well the 6.1 rom turned out to be in chinese so i had no choice but to flash the Wm 6.5..It looks very good but none of the buttons work and i cant view messages or send them. Also it does not connect to the pc using using active sync but shows that some storage device has been connected to pc and no proper drivers found for it. One good thing happended though, i came to know what the problem with the clock could be...Wm 6.5 showed on startup that my back up battery is very low and that i need to replace it..I'll get it replaced from the service center now....But im looking for a WM 6.1 english rom.... Can any body help me find it please?

Flashing HardSPL Sprint HTC Snap (s511)

Ok, I'm kind of at my wits end. I've already bricked a Sprint Snap, and I'm trying to get HARD to display on my tri-color instead of 0000 before I try ookba's rom again.
But I can't. I've done everything correct. SDA application unlocker - auto.bat from the JockyW thread, JumpSPL and boot Rom Update Utility. Every time it goes to a 100%, but once I reboot and then hold volume down I still get
CEDA200
SPL-0.34.0000
MicroP-Willow#C (LED) v58B.
No luck. I've tried hard resetting my phone with brand new factory settings (my old 6.1 was heavily modded). I've tried XP and Vista. No luck. When I confirm jumpSPL my screen goes black. Then I run RomUpdateUtility while the screen is black. Is that right? Please advise me, I'd love to have 6.5 on my snap.

Please use the correct version of Hard SPL, suitable for your phone!(S 511). Above all use Jump SPL (depending on your SPL version) and follow the prompts in the DOS window. Just press space bar. On your phone, screen will turn black this is NORMAL!Then free to interact in any way with the phone and without disconnecting the phone from the PC will need to run Hard SPL.Again attention, according to your platform (S511).After all this if all is well you should install the favorite ROM .
Good Luck!!!

i have followed these steps
I have started the romupdateutility with the black screen and it completes to a 100 percent. however my tricolor splash screen doesn't change.

Strange ...Something is wrong there.Try on another PC, make sure Active Sync or Windows Mobile Device Center is working properly.But most importantly try another JumpSPL and HardSPL, those you have now may have errors or can be corrupt file.Had happened to me with my old Diamond.

what is supposed to happen?
The .0000 should say .HARD if the flash was successful right? If a phone is HARDSPL then it won't change after a hard reset right? I really can't get this to work... is there a newer jumpspl I should try? Everytime RomUpdateUtility completes with the black screen my phone reboots and nothing has changed

DAMN
I just bricked my second snap by trying a different version of JumpSPL, really really upsetting. I can't believe I did that again, all I wanted was my device to be HardSPL and now its a paperweight. UGHHHH no phone certainly isn't better than stock 6.1... I'm probably done trying to 6.5 this damn thing. I'm going to replace it and never mess with it again. Thank you for trying to help.

Sorry man, really sorry. And I agree with you, 6.5 is nothing better than 6.1 and I think so.I have 6.5 and do not see an obvious improvement or an addition to performance.Perhaps a higher consumption of resources.I think it depends on preference.In your case maybe not everything is lost.Read this very very very carefully: "Flashing and Unbricking your Maple" by Ookba.Even if they refer to Maple, can help you.Good luck!

yay!
After getting a new s511, I attempted this for the third time
Well, It worked like magic. .Hard is now visible on my tri-color screen. SO!
Now I can flash the ROM? Do I just turn my phone on to its homescreen and plug it in to run RomUpdateUtility? Any other precautions I should take?
@Johny, thanks so much man for all of your help i appreciate it.

Yes, theoretically should work without problems now.Turn on the phone then start running RomUpdateUtility. If Hard is visible, you are insured in case of failure to update the ROM. In my case...I did not succeed the first time this.Even if I did HardSPL, I could not install 6.5, an error occurs...All they have resolved JumpSPL.If you have problems post here. Good luck!

Johnny_BV said:
Yes, theoretically should work without problems now.Turn on the phone then start running RomUpdateUtility. If Hard is visible, you are insured in case of failure to update the ROM. In my case...I did not succeed the first time this.Even if I did HardSPL, I could not install 6.5, an error occurs...All they have resolved JumpSPL.If you have problems post here. Good luck!
Click to expand...
Click to collapse
salut Johnny . putem vorbi de telefon?

drc38 said:
salut Johnny . putem vorbi de telefon?
Click to expand...
Click to collapse
Please provide an english translation, since this is a english forum

Device Help
I have a HTC Snap 511 from a Wireless Carrier in Puerto Rico it works just as fine as Sprint's. Actually its the same phone under another carrier. I tried Updating the rom i got lucky it boots 6.5 but i downloaded the wrong rom because its for a GSM phone not CDMA now its asking me for SIM and i can't updated to the one it goes ( that i downloaded sometime later )... Tri-Color Says:
CEDA200
SPL-0.39.0000
MicroP-Willow#C (LED) v 58B
i tried putting the s511 Sprint ROM but says at upgrade communication error.
I think its because im downgrading roms?
CEDA is 2.00.XXXX
WILL is 1.50.XXX
Any comments are aprreciated.
PS-
SIM Failure
The SIM card is missing or is not valid.You can still make emergency calls if your service providers supports it.
--##_- 240x320 Fun! -_##--

Which Un RAR arhivator complete work on this device (Snap S511) ???
I`m test all and not working nothing. WM 6.5 and WM 6.1
Not description for Icons in the SYSTEM(WM 6.5) menu... Baaaaad.