[REQ]Hard to find, Help Wanted ORIGINAL ELFIN ROM - Touch GSM ROM Development

I would like to know if someboy knows an original rom with this combination:
DEVICE ID: ELF010052
CID ID: HTC_001
DEVICE SHOWS AT BOOT-LOADER SCREEN:
IPL: 1.14.0002
SPL: 1.14.0000
DEVICE HARDWARE:
ELFIN 128/256
I was trying almost everything to revive a dead ELFIN flashed with RUU_Elf_DOPOD_AU_1.14.710.2_4.1.13.46_02.97.90_BLUE_Ship.
ROMS TESTED:
ELFIN:
HTC_Touch_WWE_ME_2.20.456.1R.exe---------------------------------------------ERROR [294] : INVALID VENDER ID
HTC_Touch_WWE_ME_2.20.456.1B.exe---------------------------------------------ERROR [244] : INVALID MODEL ID
RUU_Elfin_DOPOD_AU_2.20.710.2B_4.1.13.51_03.07.90_BLUE_Ship-------------------ERROR [244] : INVALID MODEL ID
RUU_Elfin_DOPODASIA_WWE_2.20.707.1B_4.1.13.51_03.07.90_BLUE_Ship_Reduced---ERROR [244] : INVALID MODEL ID
RUU_Elfin_DOPODASIA_WWE_2.20.707.1G_4.1.13.51_03.07.90_GREEN_Ship_Reduced-ERROR [244] : INVALID MODEL ID
RUU_Elfin_DOPODASIA_WWE_2.20.707.1R_4.1.13.51_03.07.90_RED_Ship_Reduced----ERROR [294] : INVALID VENDER ID
RUU_Elfin_HTC_RUS_2.20.411.2B_4.1.13.51_03.07.90_BLUE_Ship_Reduced-----------ERROR [244] : INVALID MODEL ID
RUU_Elfin_CHT_OPEN_2.20.753.1B_4.1.13.51_03.07.90_BLUE_Ship_Reduced----------ERROR [244] : INVALID MODEL ID
xdanova-update (O2 ROM UPDATE)------------------------------------------------ERROR [244] : INVALID MODEL ID
ELF:
RUU_Elf_DOPOD_AU_1.14.710.2_4.1.13.46_02.97.90_BLUE_Ship----------------ERROR [244] : INVALID MODEL ID
RUU_Elf_DOPODASIA_CHT_1.15.708.3B_4.1.13.46_02.97.90_BLUE_Ship---------ERROR [244] : INVALID MODEL ID
RUU_Elf_HTC_WWE_1.11.405.1B_4.1.13.42_02.93.90_Ship---------------------ERROR [244] : INVALID MODEL ID
RUU_Elf_DOPODASIA_WWE_1.17.707.2B_4.1.13.46_02.97.90_BLUE_Ship--------ERROR [244] : INVALID MODEL ID
RUU_Elf_DOPODASIA_WWE_1.17.707.2G_4.1.13.46_02.97.90_GREEN_Ship------ERROR [244] : INVALID MODEL ID
RUU_Elf_HTC_Asia_HK_WWE_1.15.721.3B_4.1.13.46_02.97.90_BLUE_Ship------ERROR [244] : INVALID MODEL ID
RUU_Elf_HTC_RUS_1.15.411.1B_4.1.13.42_02.93.90_Ship----------------------ERROR [244] : INVALID MODEL ID
Thnx in advance.

How you managed to get cid? Also because I find in your same situation.
tnx
maddream.

Get Cid Id
maddream said:
How you managed to get cid? Also because I find in your same situation.
tnx
maddream.
Click to expand...
Click to collapse
Read here, u will find how to get it.
http://forum.xda-developers.com/showthread.php?p=1969448#post1969448
Good Luck.

Still searching...

I can try and make a custom rom ut with your.
DEVICE ID: ELF010052
Edit you are allready trying that.
Good Luck. I really wouldn't know what to say.
I Am an Elfin Virgin. On Elf i would e a lot more confident.

Noonski said:
I can try and make a custom rom ut with your.
DEVICE ID: ELF010052
Edit you are allready trying that.
Good Luck. I really wouldn't know what to say.
I Am an Elfin Virgin. On Elf i would e a lot more confident.
Click to expand...
Click to collapse
Thanx, i was trying to edit with a hex editor but when i run the installer it says that the image is corrupted.

CyZeeK said:
Thanx, i was trying to edit with a hex editor but when i run the installer it says that the image is corrupted.
Click to expand...
Click to collapse
Why edit with a hex editor?
I meant with HTCRT.Exe from Development and hacking thread.
Wait i'll attach it.
But you will need to extract the .nb file first from the .nbh in the rom.
Then try and put it together again but entering the correct country ID and Stuff..

Noonski said:
Why edit with a hex editor?
I meant with HTCRT.Exe from Development and hacking thread.
Wait i'll attach it.
But you will need to extract the .nb file first from the .nbh in the rom.
Then try and put it together again but entering the correct country ID and Stuff..
Click to expand...
Click to collapse
Thanx a lot, ill give it a try, coz i did an edition with this tool, buuut, i cant remember if i used as a base rom the RUU_Elfin_DOPODASIA_WWE_2.20.707.1R_4.1.13.51_03.0 7.90_RED_Ship_Reduced, that is, actually, my closer option to get a success flash.
Thanx again... working... ill post results.

RESULTS: BAD NEWS
Ok, i did that edition, i only changed CID ID, coz this is the problem in this ROM.
CHANGES:
Original CID ID: DOPOD001
NEW CID ID: HTC_001

The same problems :
DEVICE ID: ELF010052
CID ID: HTC__001
I can not find ROM, after htcrt - image corrupted.
please help

Just to clarify - htcrt is a great tool for building nbh files but it doesn't sign them with the correct certificate for your phone - it uses it's own certificate. You can only flash an nbh built with this tool to a phone that has certificate checking disabled.
If your phone is stuck in bootloader mode and you have the standard SPL, you have to get a genuine signed ROM - and believe me, I sympathise with you. My HTC is stuck in bootloader and the original signed ROM is nowhere to be found...

It seems has understood, it is necessary to search ROM for ELF010052

http://www.dopodasia.com/download/R...07.1R_4.1.13.51_03.07.90_RED_Ship_Reduced.exe
DEVICE ELF0100*2 (Ok)
CID DOPOD001 - not work
I search
RUU_Elfin_HTC_WWE_2.XX.XXX.XR

pjukwork said:
The same problems :
DEVICE ID: ELF010052
CID ID: HTC__001
I can not find ROM, after htcrt - image corrupted.
please help
Click to expand...
Click to collapse
...And wich was that ROM?
marsdaddy said:
Just to clarify - htcrt is a great tool for building nbh files but it doesn't sign them with the correct certificate for your phone - it uses it's own certificate. You can only flash an nbh built with this tool to a phone that has certificate checking disabled.
If your phone is stuck in bootloader mode and you have the standard SPL, you have to get a genuine signed ROM - and believe me, I sympathise with you. My HTC is stuck in bootloader and the original signed ROM is nowhere to be found...
Click to expand...
Click to collapse
...So... at this moment we dont have any clue or other way to revive it?
i brought this champagne P3452 already corrupted thinking that could be easy reflash and fix the problem butttt oh surprise. Actually i have an other P3452, a black one working with its original ROM.
Thanx for your answers. Still searching.

dead elf
i ve dead elf 0101 i tried to flash boot with medusa i manged to bring it back to tricolor but without ruu on screen after that i tried to do matty or original ruu but still no luck
any suggestion

Related

Touchflo roms in T-Mobile MDA Vario Problem

Hey guys,
I am a new comer in this forum. I have been trying to update my T-mobile MDA vario for quite sometime now. I have read almost all the guides and instructions in this site. But I don't know what problem I am having. I tried both TNT.1437.Wizard.Touch and TNT.1921_Wizard_TouchFLO roms. In both case the flashing got stuck at 99% and then showed an error 302. then I had to get back to my shipped 2.21 original rom and try again. I also tried XM6r3 rom. I don't understand what I am doing wrong. Please can anybody help me!!! in the guide I was told to flash with 2.26 rom. But whenever I try it it shows invalid vendor id error. ???? What to do now. Is it impossible to upgrade to WM6 in T-Mobile MDA vario. (I CID unlocked my phone following the guide) Any help will be highly appreciated. thanks
MDA vario comes CID locked.. Unlock CID..search for WST... wizard service tool and unlock CID first.
irisiris is mostly right, if you get the invalid vendor id error then you're probably still CID lock. You said that you CID unlocked it already, but it might not have taken. The part he was wrong about though is that WST can't CID unlock your phone, you need lokiwiz to do that which I'm assuming you already knew. However, WST can tell you if you're CID unlocked or not. Just run it on your computer and click the CID actions button and it will tell you if you're CID unlocked or not for sure.
EDIT: Actually I was wrong, mestrini did add CID unlocking to the latest version of WST. Sorry irisiris.
you guys are right I finally CID unlocked my device. I checked it with WST and it said it is unlocked. Now I am in XDA mini rom with IPL/SPL 1.05. now I tried to flash with official tmobile 2.26 rom. but I still get the invalid vendor error. Now what to do????
In case you haven't solved your problem yet, download this file. If the T-Mobile 2.26 is still in the single executable type file that it was when you downloaded it, use either winzip or winrar to extract it to it's individual components then extract this file and allow it to replace the file it needs to replace in the folder you extracted the t-mobile ROM to. Then, just double click on the file to start the flash. Just in case, the name of the file you're going to double click on is named ROMUpdateUtility_Wizard_NoID. This should solve the invalid vendor error.

How to see what VID

Is there a way to find out Vender ID?
I have a bricked Qtek S200 (G4) and Think there is a solution to unbrick the device, I need the original ROM that it came with.
Problem is the rom I think it had (Swedish) says invalid vender ID.
So I wonder,., Can I read vender ID while in BootLoader?
Is there a way to un-vender ID the ROM's I have?
Thanks
The simplest way is to flash a ROM without checking the VendorID! earch over the Prophet forum for "NVID" or similar!

Bricked my vox, please help

Hi there,
I have bricked my vox whilst flashing it using Jocky's USPL utility, the cable fell out and now all that the vox will do is boot up to the HTC splash screen and then hang.
I can get the phone to the bootloader screen but I can't flash a new ROM as it is previously a Vodafone branded v1415 so I get Invalid Vender ID no matter what ROM I use.
I guess I need the official VF UK one but I have searched the web for hours now and I am unable to source it.
Is it possible to get round the Invalid Vender ID in any way from the bootloader screen as I obviously can't boot it to be able to use the SDA unlocker.
Any information would be greatly appreciated.
Thanks
Bunter12345
I don't know where you can find vodafone rom for 1415 but you can try with this swiss rom for their XPA v1415 version of VOX.
Look here:
http://www.swisscom-mobile.ch/scm/d...dm=Detail&pa=0x0x0x0x0x0x0x166x0&odg=Software
matrix77 said:
I don't know where you can find vodafone rom for 1415 but you can try with this swiss rom for their XPA v1415 version of VOX.
Look here:
http://www.swisscom-mobile.ch/scm/d...dm=Detail&pa=0x0x0x0x0x0x0x166x0&odg=Software
Click to expand...
Click to collapse
Hi there,
Still get the same invalid vendor id with that rom as well unfortunately, thanks for your help though.
did u find any solution as i have the same problem
mrushabh said:
did u find any solution as i have the same problem
Click to expand...
Click to collapse
Guys have you tried removing the Operator ID from the nbh file before flashing it ?
You can use TyphoonNBFTools to do that.. If you remove the operator field completely you should be able to flash the rom you want with a locked SPL..
But there is just the problem that it is a NBH file and TyphoonNBFTools can only, as the name suggests, only open NBF file.. So you need to find some tool to convert a NBH file to NBF, remove the operator field, and convert back again, and flash..
Or what about flashing the new SPL while in Bootloader with a RUU? But be aware i do not know if that could brick your device forever..
Da9L said:
Guys have you tried removing the Operator ID from the nbh file before flashing it ?
You can use TyphoonNBFTools to do that.. If you remove the operator field completely you should be able to flash the rom you want with a locked SPL..
But there is just the problem that it is a NBH file and TyphoonNBFTools can only, as the name suggests, only open NBF file.. So you need to find some tool to convert a NBH file to NBF, remove the operator field, and convert back again, and flash..
Click to expand...
Click to collapse
This is complete bull****. In another thread I already once explained that this doesn't work.

How Unlock CID only by bootloader?

Hi,
I have SPV E650 with demaged Windows Mobile and I need to reinstall it.
But it's problem...i have a CID lock and I must unlock it.
Problem is becouse I can connect my VOX to PC only via bootloader.
Can I unlock CID using bootloader mode?
How I can do it?
Thanks for reply;
Bye
Thanks for reply
Is this impossible?
Or Nobody knows how it's make?
As i know, you can not flash sspl without bypass.
which model of vox are you using ?
you can find some roms that match your CID at xda ftp server.
Read third word of my first post
SPV E650.
I can't find rom, which match my CID :<
Can you give me link to this?
Very thanks;
check ftp://xda:[email protected]/Uploads/Smartphone/Vox/ROMs/Shipped/
i am not sure which one will match your cid
maybe the RUU_Vox_HTC_FRA_1.34.406.1_4.1.13.54_03.10.90_Ship.exe ?
I tried all from this page...and all stopped at 3% flashing
Before loading WM I see Orange logo.
Okay...
that must be this one: http://forum.xda-developers.com/showthread.php?t=402619
Ok, but this link is valid
http://www.business.orange.co.uk/ser...90_Ship.exe"
Ok...i downloaded it from:
http://www.business.orange.co.uk/se...1135315302196&extarg2=SPV+E650&extarg4=select
And...I cant instal this on my phone too
Update 3% and ERROR [294] : Invalid Vender ID
I have lock for Poland Orange GSM...
dakki said:
Ok, but this link is valid
http://www.business.orange.co.uk/ser...90_Ship.exe"
Ok...i downloaded it from:
http://www.business.orange.co.uk/se...1135315302196&extarg2=SPV+E650&extarg4=select
And...I cant instal this on my phone too
Update 3% and ERROR [294] : Invalid Vender ID
I have lock for Poland Orange GSM...
Click to expand...
Click to collapse
from PL - too
did U have flashed any rom from this forum ? like frt neo ?
dakki said:
Hi,
I have SPV E650 with demaged Windows Mobile and I need to reinstall it.
But it's problem...i have a CID lock and I must unlock it.
Problem is becouse I can connect my VOX to PC only via bootloader.
Can I unlock CID using bootloader mode?
How I can do it?
Thanks for reply;
Bye
Click to expand...
Click to collapse
I have same problem . phone in bootloader mode. and upgrade rom give vendor id error.
cid bypass uspl 1.16 cannot detect phone.
guide me.
br.
Present Not Solution ! Plz Wait !
I use HTC EXCA100 Tmobile

[Q] Mango rom invalid vendor id

Hello !
I just tried to flash my Vodafone HTC Trophy ( runs NODO 7.0.7392.0 ) with the new Mango rom RUU Spark and so on but i get everytime the error INVALID VENDOR ID.
Did i have to flash my device befor with an other rom ???
Or what could be the matter
thx in advance for help
I had a problem too
SERIAL was on the Bootloader screen after RSPL --> Error260
I pulled the usb cable and reconnected it.
USB was on the Bootloader screen --> Update worked
thx for response but this wasnt the problem.
get the error message : ERROR[294] INVALID VENDOR ID
USB is connected and also shown on the display.
Before I go further with updating to the RUU_Schubert_S_HTC_Europe_4.05.401.02_Radio_5.69.09.29a_22.50.50.21_Signed_SCHUBERT_RELEASE release on my NoDo TMOUS HD7 I want to confirm a few things.
My current phone shows
SPL-3.1.2250
MicroP(LED)
Touch S1
Do I need to use the DFT tool and install the HSPL in order to bypass the invalid vendor id message?
Thanks.
jarbro said:
Before I go further with updating to the RUU_Schubert_S_HTC_Europe_4.05.401.02_Radio_5.69.09.29a_22.50.50.21_Signed_SCHUBERT_RELEASE release on my NoDo TMOUS HD7 I want to confirm a few things.
My current phone shows
SPL-3.1.2250
MicroP(LED)
Touch S1
Do I need to use the DFT tool and install the HSPL in order to bypass the invalid vendor id message?
Thanks.
Click to expand...
Click to collapse
Yes...OP, you need it too in order to flash.
thatboydrae said:
Yes...OP, you need it too in order to flash.
Click to expand...
Click to collapse
I thought when you flash to mango under hspl your device will be damaged ??? Or did i misunderstood something ???
Look into this thread : http://forum.xda-developers.com/showthread.php?t=1195647
Thnx thatboydrae - Update is going although its been stuck at 7% for a bit then through a ERROR [262]: UPDATE ERROR Communication Errors.
I went through the recovery on screen, and when it tried to flash it I got the Invalid Vendor ID again, but now my phone shows
SPL-4.5.2250 and the DFT-RSPL wont work now.
Trying to restore my phone via Zune and try again.
Schewadnaze said:
I thought when you flash to mango under hspl your device will be damaged ??? Or did i misunderstood something ???
Look into this thread : http://forum.xda-developers.com/showthread.php?t=1195647
Click to expand...
Click to collapse
From my understanding it only affects Mozart devices... I have Schubert.
Thanks for this.. I've updated my US Tmo HD7 to the Euro ROM successfully.
Below are the steps if anyone is interested...
- I have SPL 3.1
- I flashed RSPL
- I flashed HSPL
- Extracted the Euro ROM and deleted 'SPL_signed.nbh'
- Ran the ROM update utility and flashed the ROM.
Successful...
jarbro said:
Thnx thatboydrae - Update is going although its been stuck at 7% for a bit then through a ERROR [262]: UPDATE ERROR Communication Errors.
I went through the recovery on screen, and when it tried to flash it I got the Invalid Vendor ID again, but now my phone shows
SPL-4.5.2250 and the DFT-RSPL wont work now.
Trying to restore my phone via Zune and try again.
Click to expand...
Click to collapse
Jarbro, do what Vizagdude posted...it's exactly what I did for my HD7
The easiest way is gold card. The new sol that comes with the rom makes the Os load instantly. Flash with gold card, and no worries
Sent from my HD7 using XDA Windows Phone 7 App
jarbro said:
From my understanding it only affects Mozart devices... I have Schubert.
Click to expand...
Click to collapse
RSPL/HSPL will brick your device if your spl version is 4.XX, one that comes with the new RUU!
Still not able to flash my device.....
Got an HTC Trophy :
SPL-1.22.2250.0(119397)
MicroP(LED) 0x09
TOUCH A1(v10,20)
when i try to flash the Mango Rom :
RUU_Spark_S_HTC_Europe_4.06.401.00_5.69.09_RELEASE .exe
i get this message :
ERROR[294] : INVALID VENDOR ID
is there no one who can help me ????
Schewadnaze said:
Hello !
I just tried to flash my Vodafone HTC Trophy ( runs NODO 7.0.7392.0 ) with the new Mango rom RUU Spark and so on but i get everytime the error INVALID VENDOR ID.
Did i have to flash my device befor with an other rom ???
Or what could be the matter
thx in advance for help
Click to expand...
Click to collapse
Have a look at this forum: http://forum.xda-developers.com/showthread.php?p=17455211 - solved all my issues
Sweet, I'm all mango'd out now. Gotta love it!

Categories

Resources