I tried this with 3 different wm6/6.1 roms, but everything works except the phone. I cannot unlock the sim card. It complains "unknown sim status", I know this sim card works, because I tried it in another phone. I have a vodafone dual sim card and if I swap them around, it always works in my motorola phone, but never in my wizard 9100.
Here is some info
IP/SPL2.26 2.26
gsm 0.2.47.11
11.0.1.0
rom version 11.0.0.2 WWE
protocol 4.1.13.24
I am pretty sure my sim lock is removed, but to make sure I reran the lokiwiz, which did not seem to matter.
Does anyone have a clue ?
Same deal to me, and with a Vodafone SIM too
The unlock code works and then when I type the PIN, the "Unknown SIM status" is always appearing.. grrr
If anyone with a vodafone card found out the solution, please let me (or us) know
Here vodafone sim works fine. No issues of phone, pin or whatever. Did you try with another vodafone SIM?
Related
Am not really new to flashing as have sucessfully flashed handfuls of ROMs but I do appear to have caused a small hiccup with my SIM.
I successfully upgraded my radio to a win mobile 6.1 compatible one and then flashed a version of 6.1 with no problems at all.
Decided then to revert back to mobile 6 and a different radio to the default radio I was using. (12.29) after putting on 12.32 and rebooting I get the "NETWORK IS LOCKED" message "Please input unlock code"
Is my only option out of this to call my provider (Orange) Or will the SIM unlocker (stickied at the top of this forum)work after a SIM has been locked??? I guess that is its function but it does not qualify that.
Thanks Guys and girls
Network lock needs to be removed with a code from Orange, just tell them y ou are going overseas and need to use a forigen sim in it
Hello,
a few days ago i got my HD2.
Now the problem i have is to switch between the two numbers of my dual SIM card.
I installed Dual SIMToday.
But this doesn't work with HTC Sense or SPB Mobile Shell.
does anyone has an idea which sw i can use?
thanks in advance
Esip (newbee)
hi.
Where did u get dual simcard?
Hello,
i use a dual SIM from Vodafone with two different nummers
(company and Privat)
Does this Matters?
Esip
Dual Sim's
Usually, Dual Sim Card's have their own chip embedded selection menu, which can be accesed from the phone menu...you should look in the Start menu or Settings area for a new icon called soemething like "Dual Sim Card" or "SIM Toolkit" or such...if you can't find any, then most probably you have the STK Service turned of on youre phone.
The easiest eay to verify the STK Service Status is to install BSB Tweaks 1.6, and just check the menu for "STK Service" if it's turned off, enable it, reboot youre phone..and you should have the Sim Change Icon Appear.
Dual SIM
Hello,
i only have one SIM Card with two numbers.
No Dual SIM adapter between.
So there is no SW for the Duals SIM adapter on the phone.
Regards
Esip
No settings icon?!...nowhere?
There should have been an option somewere in the phone menu for the dual sim card. (i Know it's not a "Hardware Adapter" Dual sim..nevertheless it uses the same principle so it's should act as one)
In Vodafone Greece for example there is an icon called Vodafone 2gether that allows for an easy way to swap the primary number.
Read this for more info: http://www.vodafone.gr/portal/client/cms/viewCmsPage.action?pageId=1278
No settings icon?!...nowhere?
Hello redman8x8
in Germany Vodafone doesn's have these options.
there is no SW on the HD2 (no Branding)
and you don't get any Software when you get the Dual SIM.
thanks for the info anyway.
I had to do a factory reset on my SGS after the wifi kept switching itself off and was advised that was the only solution. I had unlocked my phone from Orange to put an O2 sim in it - now I am getting a Sim Network Unlock message and it will not accept the original code I used (I have rechecked it again and again) - can anybody tell me what I am doing wrong? My phone was working fine until I removed my sim and put it back in. Now I seem to be locked out! Thanks in advance!
Hello people, I'm trying to use a Claro sim card on my Personal phone (both carriers are argentinian), but can't get it to work.
The Claro card works on other phones. Mi xt925 is running CM 10.1.3 and the correct baseband (100700.220.62.33p).
It even showed me the gsm menu from Claro but no option worked, and still have no signal and get "Network not available" error.
I get something about the sim can be registered in Claro Argentina (as I said, the sim is working with no problem on other phones) when tryng to choose network.
I already have and unlock code, and don't have another sim (from a different carrier) to test it.
Is there anyway to force the phone to ask for the code?
EDIT: In case someones gets to this post, I fixed it going back to stock rom by using http://forum.xda-developers.com/showthread.php?p=38190729.
I put my sim card in and automatically asked me for the code.
I purchased a S6 on EE a week ago. Has been working fine with an ee sim, however I have not made any calls or texts yet, just using the phone for Internet on wifi etc.
I have a regular three sim which I would like to use so I have trimmed it down with scissors and this made me cut part of the gold contact bit off (I read online this shouldnt affect the sim).
I'm guessing this phone is locked as when I insert the sim it detects a new sim has been inserted, it makes me restart too. Upon booting up however it says no sim card/ emergency calls only however I see a solid connection. I cannot make any calls as it says not registered to a network or something.
Now my question is that is the phone picking up the sim card? If yes why is it not prompting me with a sim unlock code screen? Secondly is my phone not detecting the sim card at all? Is that the reason why I am not prompted with a unlock code screen? All help is appreciated. Thank you.
Go onto settings, then onto Mobile Networks, then Network Operators, then Search Networks then click the Three carrier. It will take a few mins to search for all the networks so do not back out.