Database Info

Tmobile MDA compact problem

Hi
I got a problem i tried to update a rom to my MDA compact but the device lost power. Now its does nothing anymore, i just goes on boot mode and says USB and at the bottom v1.0
Does anybody know how i can make it work agian. If have searched on the net a lot but i cant seem to find a solution and my mda is down for a month now
Tnx
Greetzz Mark

:roll: if it still has the bootloader it should be possible :roll:
:roll: get the MAupgradeUT_noID.exe (from ftp)
:arrow: take a shipped rom you wish to flash (unpack the exe with winrar )
rename MAupgradeUT_noID.exe >to< MAupgradeUT.exe
copy it into folder with extracted rom replace original one
and run the update through serial/usb cable
good luck

Okey i'm kind of a leek but i cant seem to figure out how to get on the ftp
i got cuteftp but how do i log in??

ftp://[email protected]/Uploads/Magician/
username :xda
password: xda
and browse the ftp for the files you want
good luck again

Okey this is getting better and better. I now have managed to put on a qtek s100 rom but the device reconize its an illigal rom and now it all it does is switches on and off by it self !! :evil: what can i do about it!

Unplug any USB devices you do not need. Specially printers etc. I have had some problems in the past doing upgrades that were always solved with less USB devices connected.

Okey this is getting better and better. I now have managed to put on a qtek s100 rom but the device reconize its an illigal rom and now it all it does is switches on and off by it self !! what can i do about it!

Up!

You need to try a different rom and make sure only the phone is plugged into the usb slot.

Yeah but because it keeps on switching on and off i cant get it connected so i cant upload a new rom! can't i just somehow Format my mda?

run the update file again and avoid to touch anything else it should be ok even if you have to run the update rom file more than once

:wink: mark just do the following to get the bootloader :lol:
press the Camera and the power buttons Reset with stylus while holding buttons will drop you in bootloader screen
then flash your device with another rom (the one in the modded section 1.11 noid one was a good one for me first time )

Okey i got it back in the boot menu. 8) but now i cant get on the Upload link you gave me its just empty. where can i download the rom you told me about?

this one worked for me first time
ftp://xda:[email protected]/Magician/Modified_ROMs/WWE_111.132_NoIDmod.zip
its an Imate rom but it works
again good luck

Hey everything worked out this time it all seems to work !
tnx!! :lol:

I can't get on this ftp-server
I can't get on this ftp-server.
Where als can I get this image for the mda compact??
Please help

you should be able to get on the server. but in germany Tmobile already gave out an update themself , so look on the Deutsch tmobile site you can download it there.

Wiro i got an other question for you. I see you have the Dutch tmobile as well, Is there any i can get my GPRS to work on the tmobile network?
thank in advance

mda compact
I thought this would be Linux for mda compact! Why would t-mobile distribute this?

No it is a normal update for the mda compact. it should work properly

Orange SPV M600 (HTC Prophet) Stuck in Bootloader

Guys,
I wonder if you can help. I have trawled this and many other forums and found many people that are having problems with their HTC Prophet or variations of the same device.
I have the Orange SPV M600, it was in my pocket and when I took it out to turn it on, it was displaying the bootloader screen after seemingly soft resetting itself. It is displaying the tri-colour bootloader with the following IPL/SPL
- IPL 2.10.0001 - SPL 2.10.0001
I have tried the following things that I have found in the forums:
1. Taking the battery out for 10 minutes ~ Still the same.
2. Hard Reset ~ I get the "Press SEND button to factory restore" message
but nothing happens when I push the call button.
3. Reflashing the ROM ~ I am unable to do this. I only have Vista and
WMDC does not see the phone in bootloader mode.
Is the phone dead? If so how could this have happened?
If anyone could help I would be eternally greatful. Oh and to add another complication the phone is still CID Locked
Thanks in advance
Barry

well if you where is south africa i would of helped you im sure if you have it runing on xp it will work my jamin did the same and all i did was push the camera button and reseted it got into tri colour mode and reflashed it
sorry that i could not help you but like i said if you in SA we could of tried it on my mashine

Any progress ?
did you ever get this sorted out ? Surely all you're gonna need is a PC with XP and active sync....
If I was closer you could have sent the phone to me and I would have had a go at reflashing the rom, but I'm at the other end of the country....

Hello guy here is a solution to flash under vista i have too a orange m600 and it works fine
http://www.modaco.com/RUU-Vista-done-u-t252977.html

help stuck on the bootlader screen?
guyz i have a jamin.. my cousin was flashin it and flashed the wrong software.. if i reset the phone it shows the boat loader screen!! and i cnat do anythin..caz u tell me which slftware to flash..and how to do it?? My freind told me all solution to my problem's will be solved here
hopin i will get my solution

First of all, download the NVID (no vender) AKU2.2 from here. http://rapidshare.com/files/17208693/RUU_Prophet_220734_2207114_024721_NVID.exe
Then, open activesync, select connection settings and UNCHECK the connect through USB option.
Then run the NVID file. It will take a while, and may seem to get stuck at 80% or 95%. Just leave it alone.
When that's done, you can either use it as it is, or load anyother ROM you want.

i have a bit similar problem
can some one plese guide me how to flash it with xp?????
Regards

First get a version of ActiveSync, any will do, but more recent is probably better. Then download the ROM (see above). In ActiveSync>Connection Settings uncheck the Connect through USB option. Then connect the Prophet.
Next Unzip the NVID file, and run RUU_PROPHET... This will flash your Prophet with a very basic ROM. If you then want to upgrade to a different ROM follow these steps: http://forum.xda-developers.com/showthread.php?t=310452

SD Problem Boot Up HTC TP

Hello,
Im New to this forum.
ive installed succesfully a new rom and radio.
it works fine and all.
but today when i wanted to turn the phone back on it stoped on the HTC screen.
i rebooted a couple of time ( remove battery ) but still nothing.
then i removed the SD card then it boots up to windows mobile and everything is ok.
what is the problem ?
i dont want te remove the SD card everytime i reboot or startup the phone.
also i just managed the SD card how i want everything so i also dont want to format it again ( or backup and do all )
is there a fix ?
Thanks In Advance.
P.S im on Natf 4.4 and Radio 1.12.25.19 (also GPS doesnt work that good but internet connection is great )
another question.
how can i let the HTC TP automaticly connect to the internet (3g) now i need to got to maneger all the time and enable it.

Stuck en bootloader

Maybe its in a forum,but I have looked everywere.I just sold my S200
(i bought a HD) and the S200 died...... It is in the bootloader and I have tried everything.
1. Pressing all buttons = Format failed
2. Spl can be loaded again, but no with a exe.
3.All roms can be instaled (but not al exe). If a rom installed 1
file (exe) it doest not work. I installed al least 20 rom (wm5,wm6 ect...)
All can be installed and at the end you get 100 % and finished......
I opened the S200 and the button on/of seems to be ok.
4. In the bootloader sceen I get :
IPL2.09.001
SPL 2.G4.4PDA
I am desperared because I am fixing it since a few weeks with....no result.
PLEASE, I NEED SOME HELP
(PD I am from Belgium and living in Spain)

Please need some help ( a lot)

beastmichel said:
Maybe its in a forum,but I have looked everywere.I just sold my S200
(i bought a HD) and the S200 died...... It is in the bootloader and I have tried everything.
1. Pressing all buttons = Format failed
2. Spl can be loaded again, but no with a exe.
3.All roms can be instaled (but not al exe). If a rom installed 1
file (exe) it doest not work. I installed al least 20 rom (wm5,wm6 ect...)
All can be installed and at the end you get 100 % and finished......
I opened the S200 and the button on/of seems to be ok.
4. In the bootloader sceen I get :
IPL2.09.001
SPL 2.G4.4PDA
I am desperared because I am fixing it since a few weeks with....no result.
PLEASE, I NEED SOME HELP
(PD I am from Belgium and living in Spain)
Click to expand...
Click to collapse
Try to flash the NVID from Here http://forum.xda-developers.com/showthread.php?t=353547,
if your Prophet works fine after that, you may flash any rom you like ,
...try to read my thread and....Good luck and

Dear Dioxda2.
Thanks for your comments but I think that I do not understand it all.
My S200 is in the bootlader and I did the following (your manual) :
The pda goes automaticly in the bootloader when on, with the USB words
in the screen :
1.When I try to to inslall a spl , it stays in a green screen with ipl and spl data.Nothing can be installed until baterie is removed
2. Tried to install the NVID but stops ant 80 % with error 326.
3. Tried to install Lazy tool : I put the nbf file in the lib file and install the rom
100 % and I reboot in the bootscreen (fustrating)
4. Tried to insall WM5 and the same like the lazy tool instalation.
Never activesync is connect.That why (I think) that somo roms can not be installed, like a wm5 only os.
Any sugestion ??

beastmichel said:
Dear Dioxda2.
Thanks for your comments but I think that I do not understand it all.
My S200 is in the bootlader and I did the following (your manual) :
The pda goes automaticly in the bootloader when on, with the USB words
in the screen :
1.When I try to to inslall a spl , it stays in a green screen with ipl and spl data.Nothing can be installed until baterie is removed
2. Tried to install the NVID but stops ant 80 % with error 326.
3. Tried to install Lazy tool : I put the nbf file in the lib file and install the rom
100 % and I reboot in the bootscreen (fustrating)
4. Tried to insall WM5 and the same like the lazy tool instalation.
Never activesync is connect.That why (I think) that somo roms can not be installed, like a wm5 only os.
Any sugestion ??
Click to expand...
Click to collapse
1. you may safe your prophet ONLY if you successfully flash the NVID, (just don't look at the connection status between PC and Prophet, as it was forced to bootloader mode, just run the NVID and flash dtraight until it ends, be awared that, NVID needs time to flash, sometimes needs more than 5 minutes, so ... wait for it ! )
2. I hope you can make it or you need to bring your prophet to factory due to abnormal flashing (wrong flashing)...
Good luck
PS.
[size=+3]Lazytool......[/size]
you should place your favourite XXX.nbf file next to the "LazyTool-Start.cmd" or "upgrade.cmd", but [size=+3]NOT[/size] in the LIB folder.... +_+
+_+ +_+ +_+ +_+

too bad (
Dear dioxda2..
i think this is the same problem as my S200 (
mine wasnt on the software prob but hardware...
to: Threadstarter )
try bringing your Mobile to any qualified technician near your place.. something might have been wrong inside... like mine its the comm and cam buttons that are grounded thats why its always in bootloader.. no matter what software i flash its still the same...
hope this helps
Mark

Dear Marekplph,
Can you explain me what do you mean with grounded. Do you mean a
short circuit (negative). Is it dificult and expensive to fix ?
Thanks,very helpfull

dioxda2 said:
Try to flash the NVID from Here http://forum.xda-developers.com/showthread.php?t=353547,
if your Prophet works fine after that, you may flash any rom you like ,
...try to read my thread and....Good luck and
Click to expand...
Click to collapse
I have tried pretty much all the Lazu Guides and prohpet tools.
Most of the time I get the Invalid update tool error.
Maybe the person in this thread has the same problem I have.
I have a G3 Prophet (Qtek S200), that has been flashed with a G4 Rom.
Not it is stuck in tri-color screen and nothing seems to help.
the prohpet tools I downloaded gives me errors and there is little documentation of where to put rom files etc. Maybe you know?

noonas said:
I have tried pretty much all the Lazu Guides and prohpet tools.
Most of the time I get the Invalid update tool error.
Maybe the person in this thread has the same problem I have.
I have a G3 Prophet (Qtek S200), that has been flashed with a G4 Rom.
Not it is stuck in tri-color screen and nothing seems to help.
the prohpet tools I downloaded gives me errors and there is little documentation of where to put rom files etc. Maybe you know?
Click to expand...
Click to collapse
if you want to make a fast move, bring it to the factory....
mess up upgrade code (G3 and G4) ... sorry... doomed.

back again
yes in my country its cheap.. coz something inside short circuited and that keeps my camera button pressed and taking pictures of his own < scary > if you cant fix this try to visit an authorized technician that can fix this for you...

ok, will send the s200 to the SAT (repair). I don´t have other options.

HERM100 (hermes) Unlocking problem

Hello,
I have HTC Hermes locked to Docomo Japan network, I run AUTO_Unlock_v3a for CID and SIM unlock , it went well so i was able to flash the device with and english window 6.5 custom rom , but when i inserted another carriers sim a message displays on the screen that ( you have tried 10 times , please wait until timeout)
I run RUU_HERM_Unlock_v3a and copied Herm_Unlock_v3 to the device and run it but still same message that ( you have tried 10 times , please wait until timeout)
What should i do please?