How to recover old style of SMS in wm6.1? I dont like threated sms!
Thnks.
Slow, heavy on ram and buggy.
On a similar note, does anybody know how of a way to restore 6.0 SMSs into 6.1? I used to use the Jeyo Backup, but this won't restore into 6.1 properly.
Cheers,
Steve.
Please use this cab file
StevePritchard said:
On a similar note, does anybody know how of a way to restore 6.0 SMSs into 6.1? I used to use the Jeyo Backup, but this won't restore into 6.1 properly.
Cheers,
Steve.
Click to expand...
Click to collapse
I use Pimbackup ( using since version 1.5) and in WM6.1 it restored(not 100%).
But me also don´t like WM61 style.
It´s confusing....
gaiolo said:
I use Pimbackup ( using since version 1.5) and in WM6.1 it restored(not 100%).
But me also don´t like WM61 style.
It´s confusing....
Click to expand...
Click to collapse
Sounds like 'I don't like change!'
I found this:
[HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings]
"SMSAvailable"=dword:1
Change 1 -> 0
Works, but not sounds.
Better sounds then style!
dodadent said:
I found this:
[HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings]
"SMSAvailable"=dword:1
Change 1 -> 0
Works, but not sounds.
Better sounds then style!
Click to expand...
Click to collapse
It works!!
Here it is:
If you have already done this :
"HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settin gs\SMSAvailable
Change dword value from 1 to 0 "
you will have to turn back the SMSAvailable dword from 0 to 1 (its orgiginal alue)
then
create a folder named OEM in HKEY_CURRENT_USER\Software\Microsoft\Inbox\Setting s
Then in the new named OEM folder, create a DWORD key called
SMSInboxThreadingDisabled
with a value of 1
Crédits to : ziadah
al_3sjad said:
Please use this cab file
Click to expand...
Click to collapse
Don´t works c4arab SMSMode.cab in Ranju ROM...
Try this cab.
Or could anyone share that threadsms as cab from 6.1 here?
I love it madly yet I have to stick with a 6.0 Rom.
Thanks truly lots.
Thanks for speed200 provided a very useful cab file.
May I know how to make the "Message Sent!" box appear after a SMS sent? (Just like the WM5/WM6)
i'm also very happy with this cab
danke, thanks, merci
btw: since 6.1 i can't get messages from inbox with jeyo mobile extender 2.5! outbox will be synchronized.
please help me!
nb: i've installed 2.0 then deinstalled, installed 2.5 again, the problem also persists
How could I use SMS like WM6.1 in WM5.0 or 6.0?
Thanks
Good job..Thank you so much dude..
Thank you so much speed, now i can read all my old messages again......
Can't get back to Threaded after disabling it!!!!!!!
Ok So I disabled Threaded text by adding the Reg entry and changing the value to 1. Now I am trying to get my threaded text back but when I change the Reg entry to 0 the program won't open and my contacts won't load!!!!
I have also gotten a message when trying to open any other programs that states:
"Cannot open 'tmail'. (or any other program I try to Open) A critical component is either missing or cannot start because program memory is unavailable.
When i change the 0 back to a 1 my texts are displayed fine and eveything is normal. Am I stuck with non threaded text forever?!?!
Sprite backup , Jeyo mobile and PIM Backup all fail when trying to restore the text data, if that helps at all. I have a lot of texts that I don't want to delete and I don't want to hard reset my device. Anyone going through the same?
Quote:Originally Posted by DaveShaw
I think I've found a fix fr using this with WM6.1. I have done this twice and it seems to work. Can someone else please confirm this works?
My Process:
Backup Everything except Contacts, Appts and Tasks.
Flash ROM (Dutty Private Beta 2 and 3, any 6.1 should do)
Restore All from PIM
Go into SMS/MMS, Menu, Tools, Clear SMS/MMS
Close (not minimize) SMS/MMS.
Go into PIM backup, turn on Verbose. (Dont think verbose helps, but its what I did).
Restore just the Messages, nothing else (Leave the option as "Delete all existing...")
Re-open SMS/MMS.
Wait for Messaging To Create the threads.
Hope this helps.
Go To Advanced Configuration
in advanced configuration, go to messaging where u can switch between standard ( not threaded) and threaded mode, it's built in in Tomal's ROM, u don't need any other stuff or application, and it's reversible, As for the backup use the PIMbackup it works with 6.1 like a charm
Cheers
Related
Hello guys I would like to ask what software can be use just to upload my SMS text from my pocket pc to my Desktop? Just to have a personal SMS Text Archive right now a have a total of 2k SMS Text stored on my PDA and I would like to secure it before not to late.
jeyo mobile companion can do that
oldsap said:
jeyo mobile companion can do that
Click to expand...
Click to collapse
The Jeyo mobile extender as well as conpanion have a basic flaw. It stores the message text in the "subject" field istead of body. As a result it can store only 255 characters in it. If the message id largert than 255 characters then the message is truncated and excess part is lost.
SMSOrganizer will help.
It has Full SMS Backup feature + Export (which will create file-based folders structure of your SMS account & each sms on a seperate file)
Its free, get it from here:
http://www.zedsoft.net/
tnx
thanks alot guys it help me from what i need
ezzkht said:
SMSOrganizer will help.
It has Full SMS Backup feature + Export (which will create file-based folders structure of your SMS account & each sms on a seperate file)
Its free, get it from here:
http://www.zedsoft.net/
Click to expand...
Click to collapse
SMS organiser does not work on WM5. It is working only on WM2003.
Ok then use Spb Backup or Sprite Backup
Sprite Backup lets u backup your SMS & restore them at any time.
Spb Backup does the same also.
But when I did my last hard reset, smsOrganizer & Sprite Backup both failed to restore my SMS messages
Spb Backup to the rescue! :wink: It has restored all of my SMS messages without any troubles
hi, it works on WM5 devices?
smsOrganizer for WM2005 is avaiable now!
c_shekhar said:
SMS organiser does not work on WM5. It is working only on WM2003.
Click to expand...
Click to collapse
smsOrganizer for WM2005 is avaiable now!
anevemkovacs, nice to hear! I'll add this title to my recommendations.
BTW, guys: follow my articles, I've written about SMS exporting and linked in a local XDA-Dev thread explicitly. Please see http://forum.xda-developers.com/showthread.php?t=283080
does any1 know how this guy makes his program send u a msg telling to the d/l the latest version when you try using the program?
ie i went to start smsorganizer today, and it doesnt start, but comes up with a pop up asking to check the website for the latest version...
how does anevemkovacs get the program to do that ?
does he have access to control the program even though i haven't been online for months...
I have received the MDA Vario III this week and started to backup all SMS, etc from my old Vario I.
Before that, I have simunlocked my Vario III and put on the official WM6.1 ROM (ROM 3.03.405.0.WWE, Radio 1.64.06.04),
I have backupped my old SMS, etc on the Vario I with PIM Backup (but also used HTC Data Backup) and trasfered the backup-file to my Vario III.
There I did a restore.
Contacts, call history, etc was restored fine.
Only problem is that not all my SMS was restored.
PIM Backup said to have restored 25 SMS (which is correct), but on the Vario III is shows only like 10 SMS in my inbox.
Does the Vario III automatically hide some SMS or something ?
Someone had the same problem ?
This has been discussed on the PIM backup thread. Have a look there for answers. http://forum.xda-developers.com/showthread.php?t=299705
I had to restore twice. Once missed half of the messages I received. The second time they all appeared. I think I used the SMS/MMS software to clear all messages before the second restore.
Thanks for pointing me in the right direction....I guess I completely overlooked it
I have tried several restores already, even only messages restore (or even only inbox restore), but I keep having only 10 messages where the database clearly says that 25 messages are in it.....
Strange....but I will discuss this further in the right thread.
change the sms WM6.1
DaveShaw said:
This has been discussed on the PIM backup thread. Have a look there for answers. http://forum.xda-developers.com/showthread.php?t=299705
I had to restore twice. Once missed half of the messages I received. The second time they all appeared. I think I used the SMS/MMS software to clear all messages before the second restore.
Click to expand...
Click to collapse
this is only my personal opinion, for me the performance of WM6.1 is superb however the only thing i feel disadvantange/a little disappointed about WM6.1 is the way of sms program showing the message. i still like the old one style. really appreciated if you have the software to change it to the old one.
amzary said:
this is only my personal opinion, for me the performance of WM6.1 is superb however the only thing i feel disadvantange/a little disappointed about WM6.1 is the way of sms program showing the message. i still like the old one style. really appreciated if you have the software to change it to the old one.
Click to expand...
Click to collapse
I've posted a suggested fix for the message restore on the PIM backup post.
here is how to disable threading in 6.1 http://forum.xda-developers.com/showpost.php?p=1903034&postcount=746
thanks dude!!!...
no ringtone for new message
DaveShaw said:
I've posted a suggested fix for the message restore on the PIM backup post.
here is how to disable threading in 6.1 http://forum.xda-developers.com/showpost.php?p=1903034&postcount=746
Click to expand...
Click to collapse
a little help here...once i change the key, its working fine and i like it. but the only thing problem now is there is now ringtone for new incoming message.i've tried to change other ringtone but it wont work too but it will work if i change back to original key by WM6.1..will ya help me out..
Ok I'm having some problems with this. Ive tried to use PIM backup and it sort of works. It backups and restores (sort of) all of my sms's but none of my contacts.
The sort of part is that the sms window is really slow and its not threading together the messages. When I turn off threaded messaging all is well.
when I went from wm5 to wm6.1 on my tytn I used spb backup and it worked perfect all the messages threaded no issues, it took a few mins but when it was all done all was well.
Ive tried the spb backup again but SPB dosent allow you to use a backup from one device on another type of device.
On the contacts issue I did the same thing on my tytn when I went from wm5 to wm6.1 I used spb backup and like magic they were all there with pictures and other info.
So you gurus out there any ideas?
Many thanks in advance!!
Try Sprite backup....or activesync
blackangst said:
Try Sprite backup....or activesync
Click to expand...
Click to collapse
Activesync will do that? It has a use?! I thought it was just some annoying program I had to use to install non cab file programs, thanks I never thought about it.
Will also look for sprite, thanks!
also u can copy over the pim.vol file from the tytn to the fuze thats fool proof illl provide u with a link to do it
ilikepu said:
also u can copy over the pim.vol file from the tytn to the fuze thats fool proof illl provide u with a link to do it
Click to expand...
Click to collapse
Does this copy SMS messages too?
Is it possible to copy over non-threaded SMS to threaded with any of these programs? I've got an 8525 with WM6 going to a FUZE.
Nautme said:
Is it possible to copy over non-threaded SMS to threaded with any of these programs? I've got an 8525 with WM6 going to a FUZE.
Click to expand...
Click to collapse
copy the pim.vol to the storage card or to the comp get the new phone RENAME the pim.vol on the NEW phone and put the OLD pim.vol file in soft reset and boom your done
and yes pim backup n sprite does t
ok guys all is well now thanks for the help!
ilikepu said:
copy the pim.vol to the storage card or to the comp get the new phone RENAME the pim.vol on the NEW phone and put the OLD pim.vol file in soft reset and boom your done
and yes pim backup n sprite does t
Click to expand...
Click to collapse
Yeah... Didn't work for me. I copied pim.vol (4.5MB) from my 8525 to my MicroSD card, then put it in the Fuze, renamed the Fuze pim.vol to pim.vol.fuze and copied the 8525 in its place (using total commander). I shut down and restarted as well as pushing the soft reset. No SMS messages show up.
Did I do something wrong or miss something?
[Edit]
I guess it's called patience. It looks like they just take forever to load or thread or whatever. I ended up using PIM Backup though as I only needed the messages. Also, there's no "Multimedia Messages" folder to copy to on the Fuze. I'll have to move those somewhere else.
there is no mms folder with threaded turned on if you turn it off there will be a folder. the mms messages are threaded too
Can I go back and forth (non-threaded to move them then threaded to join them)? If not, is there another way to get the MMS messages from one to the other?
hondaguyjoe said:
there is no mms folder with threaded turned on if you turn it off there will be a folder. the mms messages are threaded too
Click to expand...
Click to collapse
Okay, I took the plunge and tried turning it off and on again (using SMS Tweaker 1.5). I didn't lose any messages, but the Multimedia Messages folder never shows up. I'd really like to keep my old MMS messages. Anyone got any suggestions?
I used PIM Backup to backup my text messages before hard resetting my phone... this is an example of a threaded message before:
Code:
Me 1/1/8: Hey mate how's it going?
Bob 2/2/8: Good, whats been happening?
Me 3/3/8: Not much ... just work
Bob 4/4/8: Ahh ... that sux
When I restored the messages they appeared as follows:
Code:
Bob 2/2/8: Good, whats been happening?
Bob 4/4/8: Ahh ... that sux
Me 1/1/8: Hey mate how's it going?
Me 3/3/8: Not much ... just work
... I use PIM Backup 2.8
... this really sux.. is there anyway to "reindex" the messages or something to get them back in order?
Let me know if this has happend to you or how we can fix it.
Much appriciated,
Kris
Same happened to me and I solved it the following way:
You need a registry editor, I use resco, but anyone should work.
In "HKCU\Software\Microsoft\Setting" you create a folder called OEM where you make a non threaded SMS setting, (reg attached to save you the hazzle) when that is done, softreset and restore the messages with PIM Backup, remember to set it to delete all previous messages and now you have all your messages the old fashion way with no threading.
Then you go to "HKCU\Software\Microsoft\Setting" and delete the OEM folder created before, softreset and voila your messages is back to threaded format with right order.
a little work but apparently the PIM Backup for whatever reason cannot put them in right order when restoring
Garcia said:
Same happened to me and I solved it the following way:
You need a registry editor, I use resco, but anyone should work.
In "HKCU\Software\Microsoft\Setting" you create a folder called OEM where you make a non threaded SMS setting, (reg attached to save you the hazzle) when that is done, softreset and restore the messages with PIM Backup, remember to set it to delete all previous messages and now you have all your messages the old fashion way with no threading.
Then you go to "HKCU\Software\Microsoft\Setting" and delete the OEM folder created before, softreset and voila your messages is back to threaded format with right order.
a little work but apparently the PIM Backup for whatever reason cannot put them in right order when restoring
Click to expand...
Click to collapse
My registry doesnt have the setting folder ("HKCU\Software\Microsoft\Setting") has "HKCU\Software\Microsoft" though ... am i missing something?!
Thanks,
Kris
No, you didn't miss anything, it was me that was too quick when writing, it should be:
HKCU\software\Microsoft\inbox\settings
I forgot the inbox, sorry
Garcia
thanks alot
So many whoas solved in such little words.
Dude, I know this is an old thread, but this worked like a charm. Thanks so much!
Maybe someone should update the PIMBackup official thread to edit this in so other people having the same problem have something to refer to.
also, the key for those that don't want to install the .reg file:
Code:
[HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings\OEM]
"SMSInboxThreadingDisabled"=dword:00000001
Hey friends
Is there any possibility that to change the default sms manager with vito smschat app?
ThreadMoved
Thanks for warning and still waiting the answer
you want to load vitosms when you click on Messaging instead of loading Poutlook?
nir36 said:
you want to load vitosms when you click on Messaging instead of loading Poutlook?
Click to expand...
Click to collapse
Yes i want vito sms as default
Me too
Hey all,
I'm looking for the same answer. I'm running DCD 3.3.4 and cannot get threaded SMS to work, though Vito Chat works well. Vito will intercept any incoming SMS, but I want to use it with my HTC Home and cannot figure it out.
Thanks in advance, F
mortscript can help you with this.. if you want to change the default messaging app.
i suggest you search in the MortScript Examples thread..
http://forum.xda-developers.com/showthread.php?t=289197
if you can't find a script for this there, you can post a request in this section for a script to change it... i'm sure someone would help you out.
You must have a registry editor!
go to:
HKLM\Software\Microsoft\Shell\Rai\:MSINBOX
in the string "1" write
"\Program File\VITO\SMS-Chat\SMSChat.exe"
ps. you have to write the "
gfandrea said:
You must have a registry editor!
go to:
HKLM\Software\Microsoft\Shell\Rai\:MSINBOX
in the string "1" write
"\Program File\VITO\SMS-Chat\SMSChat.exe"
ps. you have to write the "
Click to expand...
Click to collapse
Hi, i test this way but it doesnt work for me, i can see in the string "0" the word TMAIL its mean something ?? i hope your opinion my friend
hi!
i have TMAIL in 0 to...
i dont now why it doest work for you... check the spelling in 1, and remember to add the "
and if you installed vito sms chat on storage card you have to change the link...
gfandrea said:
hi!
i have TMAIL in 0 to...
i dont now why it doest work for you... check the spelling in 1, and remember to add the "
and if you installed vito sms chat on storage card you have to change the link...
Click to expand...
Click to collapse
It worked for me (Thank you) with TWO DIFFERENCES:
- I didn't write the ""
- I have a German ROM so the path is \Programme\VITO\SMS-CHAT\SMSChat.exe
CU
Hi, i try again this configuration, but it doesnt work, i try with "" amd without "" and nothing, i have instaled the program in my HTC no in the storage card, but i see when i write this the messaging icon change like undetifine, well i hope others suggestion and thanks for your help.
Note: could you show some images, i wanna sms-chat by default for work to spb mobile shell 3
I post a screenshoot! hope will help
BTW in my ppc mobileshell point to vito sms chat with this change on the registry!
This .reg hack works for me with the "" but the path is \program files\ (with an s) not \program file\, so check that if it's not working for you.
And thanks grandrae, this make ms3 just a little better. Do you know any other ms3 .reg hacks? I would like to launch g-alarm from my clock.
Hi, i have a HTC Titan, and i am using SPB Mobile Shell 3, when i try this register change and i press the SMS botton nothing happens, my vito sms-chat is no default sms program, i check letter by letter all its ok, but i dont know why dont works for me, y wait yours tips please..!
uniqueboy said:
This .reg hack works for me with the "" but the path is \program files\ (with an s) not \program file\, so check that if it's not working for you.
And thanks grandrae, this make ms3 just a little better. Do you know any other ms3 .reg hacks? I would like to launch g-alarm from my clock.
Click to expand...
Click to collapse
This is not a mobileshell 3 hack... you change the default sms manager for all the windows mobile system, i dont now ms3, so i dont now other hack for it, sorry.
imohtep said:
Hi, i have a HTC Titan, and i am using SPB Mobile Shell 3, when i try this register change and i press the SMS botton nothing happens, my vito sms-chat is no default sms program, i check letter by letter all its ok, but i dont know why dont works for me, y wait yours tips please..!
Click to expand...
Click to collapse
If when you push the sms button, nothing happend, the problem is that you write wrong the path to sms chat; check if it work with or without te " and if you have sms chat installed in an other directory.
Partially working
Hi. I'm also using Spb Shell 3, and it is starting Vito SMS very well. It's just a matter of making sure that the app path is ok. As a suggestion, what I use to do is in the PC with Windows Explorer I navigate all the way to the executable, and the copy the path from the explorer and paste it on the registry (directly on the phone via MyMobiler, or on the PC using CERegEditor). So, on the main screen, when I press the SMS button it goes directly to SMS-Chat.
What is not working is, when I go to the Contacts panel and press the "Send SMS" button, it goes to the app, but not directly composing a message, so I have to browse and select the contact. Is it possible to start composing directly from the contact panel?
Thanks in advance.
rafaelegomezb said:
What is not working is, when I go to the Contacts panel and press the "Send SMS" button, it goes to the app, but not directly composing a message, so I have to browse and select the contact. Is it possible to start composing directly from the contact panel?
Thanks in advance.
Click to expand...
Click to collapse
This may or may not work for the Contacts panel, but try modifying the registry key and append open:%s outside of the quotes.
HKLM\Software\Microsoft\Shell\Rai\:MSINBOX
1 -> "\Program Files\Vito\SMS-Chat\SMSChat.exe" open:%s
Seemed to work for me in MS2 Contacts. The unfortunate side-effect of doing this though, is when you select the SMS icon on the Now screen, it goes to the compose window (and addresses it to some unknown string like "Service...").
i changed this registry entry
HKLM\Software\Microsoft\Shell\Rai\:MSINBOX
1 -> "\Program Files\Vito\SMS-Chat\SMSChat.exe"
from the now screen it opens sms-chat(good)
from the contacts it opens sms-chat(good)
from the map messages in spb3 when i select messages it selects sms-chat(good)
from the map messages in spb3 when i select compose new message it selects THE ORIGINAL WM program NOT GOOD.
were is that second entry located in the registry?
it seems 2 entries are used, one for messages and one for compose new message