Database Info

Camera problem

My camera suddenly stopped working, I took pictures yesterday as usual but this morning when I tried to take some, well the camera just doesn't want to launch itself..
I tried to go back to official roms and such but it didn't change a thing, is there a solution please I don't wanna say goodbye to my qtek9100 camera function

Anyone please? I really need some help

yo, anyone alive please?

you haven't given much information. Does the camera app start with a black screen? Have you tried to start the app via the shortcut instead of the button. If the camera was bad i'd think the software would still run. Could your button be bad?

No nothing works, it's not even recognized by the pda anymore, I tried to launch it with any way possible, I tried to reflash but it's still not recognized. I also looked if the camera was ok (inside the pda, dunno how to say) but it was still in place, it suddenly stopped being recognized after flashing a rom radio

I didn't really get more answer lol

Anyone please?

if you have problems with camera after flshing original rom, then your hardware is broken.

camera problems?

I've just acquired a 8125 G3 and I immediately flashed the rom to WizFlo. I'm not too familiar with the 8125 (other devices I have are 2125's, HP H6315, Dell X30's) so I don't know how it worked with the original ROM. I see there is an LED next to the camera, but nothing I do ever lights it up. Plus the camera is always too dark...the auto white balance is always too dark. Are these normal problems? Are they related to the WizFlo ROM? I also tried the Touch HD 0.6 ROM and the camera was the same. Is there a camera upgrade to fix this? Or do I have a hardware problem?
I used LikiWiz to unlock the phone and ran the t-mobile 2.26 IPL/SPL.
Thanks

There is a Flash Button Next to the Capture Button in your Software , i my slef found that out after one moth of my use lol

Where? I have 1 button on the side that opens the camera app and takes a picture. I can use the center button on the nav control to shoot a picture. On screen I have 3 icons...album, camera mode, ad settings....none have a flash control or button.

My camera software is HTC Camera 6.13 and my phone is a Cingular 8125.

tonyzoc said:
My camera software is HTC Camera 6.13 and my phone is a Cingular 8125.
Click to expand...
Click to collapse
The 6.1.2.1 WizFlo was purely an experimental release. New camera and few fiddly bits so we can test it. I have not managed to get the camera workin 100%. Flash back to 6.1.2.0.

Ok, Thanks. Since I didn't spend any time looking at the original ROM when I got it, I wasn't sure if I had a hardware problem of this was a ROM issue. I like the WizFlo 2D ROM and I don't care about the camera functions...If you want any feedback on bugs I find I'd be happy to let you know.

erm i meant in the software, when u start the camera, there are 3 buttons on the right hand, the first one has a red line on it, press it and the flash will be activated

ather90 said:
erm i meant in the software, when u start the camera, there are 3 buttons on the right hand, the first one has a red line on it, press it and the flash will be activated
Click to expand...
Click to collapse
I also have the same problem as reported.
When you install the version Wizflo I do not have the option of activating the flash of the camera ... how can I fix this?

cornelha said:
The 6.1.2.1 WizFlo was purely an experimental release. New camera and few fiddly bits so we can test it. I have not managed to get the camera workin 100%. Flash back to 6.1.2.0.
Click to expand...
Click to collapse
theres your answer

Panorama not working

When i switch to panorama on my phone and attempt to take a photo it says, "Camera: Unable to capture photo. Disk full." I'm using 3GB of my 8GB card, so I know there is room on my card. I also tried saving it to main memory with no luck. I also tried switching it to the lowest quality and resolution, all with the same results. Any help would be appreciated.

:Bump: ANyone know of a possible solution>?

Got panorama to take pics, but can't stitch. No ghost image comes up. It just allows me to take 3 pictures, or however many i have the stitch counter set to. Does anyone know which P# folder in the registry and which settings enable the ghost image to enable stitching???
Thanks in advance.

I just noticed that I have this same problem, I think its when I edited the P3 reg.
edit: I changed the settings back to normal and still cannot take panoramic pictures...

Ya i'm having this issue too. I'm not sure what I did to get to this point? I installed NATF v4, I did a radio thingy. I did some GPS tweaks.
Anyone do any of that recently? Maybe we can try to isolate the issue?

I also enabled the FPS counter in the camera, you guys have that enabled?

07accordEX said:
I also enabled the FPS counter in the camera, you guys have that enabled?
Click to expand...
Click to collapse
hmm I don't believe I've done that

when I record video, it shows an icon saying that sound cannot be recorded also, weird...

07accordEX said:
when I record video, it shows an icon saying that sound cannot be recorded also, weird...
Click to expand...
Click to collapse
Yea I initially had that as well. I fixed it by going into the settings and adjusting the sound. Hope that helps at least.

Camera not saving picture

Hey all,
I just got (and totally love) the Fuze. I've already flashed it to NATF's 2.2 and it's just amazing. The only problem is that somewhere between yesterday and today, the camera has totally flaked out on me :-(.
I'll take a picture (and regardless of if its set to store on the memory card or internal mem) and once I opt to save it, the Fuze just hangs with the "Windows thinking" ball spinning. After a while it goes back to "Albums" and the recently shot picture isn't there.
I implemented the GPS fix and have been toying in Advance Config -- but I don't think any of those changes should have affected the camera. Even weirder, the picture counter is incrementing and I do have open storage on both the card and internal.
Any ideas?
- Matt

same thing happened to me.
Turns out autoconfig has a bug for the fuze.
For the camera options in autocofig
there's something called portrait, and was initially disabled.
changing it to enable breaks the camera.
took me days to figure that out...l o l

funnysam said:
same thing happened to me.
Turns out autoconfig has a bug for the fuze.
For the camera options in autocofig
there's something called portrait, and was initially disabled.
changing it to enable breaks the camera.
took me days to figure that out...l o l
Click to expand...
Click to collapse
Thanks! That was the problem and now the camera works fine! Is there a FAQ or something this should go into? Without your help I would never have found that.
- Matt

haa..np at all..just sharing something that i've found out after hours of hard resetting, flashing, installing, etc... l ol
maybe tomorrow'll be you helping me...
cheers!
-sam

Thanks!
I had this problem too, on both my Sprint Touch Pro and AT&T Fuze. Wouldn't save in photo mode (though video, contacts photo, panorama etc. modes were okay). There was no error message on the Fuze so I didn't realize there was a problem until I went looking for some pictures and couldn't find them. After I figured out what has going on I checked the Sprint version to see if it had the same problem. The Sprint Pro at least gives an error message about not being able to save the file.
I had installed Advanced Config on both devices, so I thought it might be one of the settings in there that had killed the camera. However, telling AC to restore all settings didn't fix it so I've been tearing my hair out looking for other causes. Fortunately I found this thread before rendering myself completely bald.
Is this a bug in AC, or was I wrong in my assumption that "restore all settings" would restore everything to default?
I wonder how many people with Fuzes have this problem but don't know about it due to the lack of an error message.
Cheers,
Elizabeth

Thanks, saved me hours. My pictures would save sometimes, but only half of the picture. Works perfectly again now.

glad someone helped you out!

funnysam said:
same thing happened to me.
Turns out autoconfig has a bug for the fuze.
For the camera options in autocofig
there's something called portrait, and was initially disabled.
changing it to enable breaks the camera.
took me days to figure that out...l o l
Click to expand...
Click to collapse
Thank you for sharing. Can't say how much time you saved me but you did!
Some searches I used to find this were:
raphael camera issue
raphael camera pause
raphael camera saving problem
touch camera issue
touch camera pause
touch camera saving problem

omg! this has bugged for the last month or so, and i've been too busy to do a good search on it! i thought i didn't try the right combination. i don't remember changing anything with AC, still thanks so much for the solution funnysam

Does new Autoconfig version fix the bug?
The latest version is 3.3.0.0.
Does anyone know if that bug was fixed?
I ask (instead of providing feedback from my own experience) because I had the older version installed first, and then installed the new version over it, so maybe the bug persisted.

AdvConfig 3.3 doesn't list the option for portrait now.
AdvConfig 3.3 doesn't list the option for portrait now.

Hmm, interesting.
I performed a "Reset all settings" did a soft reset, and the option for the Portrait is now visible, with "Enabled (default)" selected.
Once I disabled that option, camera is working great.

bwb8771 said:
...Option for the Portrait is now visible, with "Enabled (default)" selected.
Once I disabled that option, camera is working great.
Click to expand...
Click to collapse
Same problems, and this works for me
Thanks, Bros

I'm using AC3.3 and have some weird camera issues. The closest option I can see in AC3.3 is to "Encode photos in portrait mode" and have NO selected. Is this the option you guys are talking about?

Yes. That's the option.
For me, that fixed the issue of the camera taking *forever* to save the picture and then display the options buttons. Even if I left the camera to finish, the picture never saved.
And, it didn't matter whether the shot was landscape or portrait - with that option enabled, the problem persisted until that setting was disabled.
Too bad, because that would be a nice feature!

Thank you!!!
This problem has been plaguing me for the last 2 days. Seems that whenever I get my Fuze working just the way I like, something else happens to irritate the crap outta me. Thanks for posting this!

Hm.. I'm using Advanced Config 3.3 as well and it doesn't display the portrait option. Does anybody know the registry setting this is modifying?

I am glad I stumbled across this series of posts. My experience with the Autocofig Bug gave me several days worth of heartburn. Thank you for the help!! It was much appreciated!!!

HELP My camera won't save pictures! Video included

Hello and please help!
My camera won't save photos, It just gets stuck! The phone has Romeos, and the camera worked fine until last week. Romeos is like 9 months old or something.
I can't post links because I'm new here but you can find it by going to youtube.com/watch?v=M6dwOhGWLNE

I have been through the same situation, and the problem was solved.
Thread
funnysam said:
same thing happened to me.
Turns out autoconfig has a bug for the fuze.
For the camera options in advanced cofig
there's something called portrait, and was initially disabled.
changing it to enable breaks the camera.
took me days to figure that out...l o l
Click to expand...
Click to collapse