Netfront 3.5 Connection Problem (SOLVED) - Tilt, TyTN II, MDA Vario III Windows Mobile ROM De

Any get NetFront 3.5 to work on wm 6.1 over wifi? it works over my 3g connection but not over wifi but when i try pIE over wifi it works fine. i tried 26 WM 6.1 Professional.v2 WWE and WM6.1 based v3.0 Sleuth. Haven't tried any wm6 roms yet want to ask if anyone with wm 6.1 has it working on wifi?

Hi,
via an usb connection to my laptop, to be able to surf, i had to desactivate the "auto proxy discovering" AND "use proxy"
in menu/tools/browser setting/menu/network proxy button
i didnt try to browse with my carrier data plan else wifi yet
regards

I tried that it didnt work then i disabled both and it works fine so thanks for leading me in the right direction

Related

Will the universal rom work for me?

i have a Qtek 9000 but still what to use some of my programs from my WM5
does this work?
Exchange Mail support
TOMTOM
TOMTOM Bluetooth GPS
Bluetooth
and Sync with Outlook from XP or Vista
if any can confirm this works with WM6 than i´ll go for it
i never use Video calls so that does´t matter.
Can any recommend a ROM for me?
Yep they all work.
Except if you are going to use Direct Push mail with Exchange, with a constantly active connection, you will probably have issues with your data connection hanging. The only way to resolve it is to enable/disable the radio (sometimes works) or soft reset.
To stop it happening in the first place, selecting GSM only (ie not 3G) in the Radio options does the job..

Internet Sharing with WM 6.1 (Cingular 8925)

Hi,
I upgraded to stock HTC WM 6.1 rom. Now when I try to use Internet Sharing I can't connect to internet.
It seems to establish network connect wit the phone and I can even ping the phone IP address, however I can't reach anywhere beyond the phone. Vista network center says that network connection is "Local Only".
I use MediaNet with all proxies disabled.
Any advice?
Thanks
Hmmm... I know there is a driver issue with Vista that affects many connections with both ports & usb from what I've read. Unfortunately I use XP & SLeuth & it works fine. Try searcing google for Vista ICS errors or issues.

Unable to connect to W/L Router

I am running L26 Kaiser Diamond V6, which is running great, except that I cannot connect to my wireless router. I have other HTC devices which are connecting ok, whereas my kaiser detects the network but will not connect.
I have upgraded the Radio to 1.65.20.29 and installed MSVC 1.6 ontop of L26 Diamond V6.
I have downgraded the radio, but this does not make any difference ...
icek said:
I am running L26 Kaiser Diamond V6, which is running great, except that I cannot connect to my wireless router.
Click to expand...
Click to collapse
I have a similar problem in that I can connect, but only get access to the network if the WLAN power setting is on "Best Performance". Does that setting also not work for you?
If that doesn't help, then more info could be useful. Do you get an ip address assigned if you're set on auto (dhcp)?
My problem is the same.
Coming from a Dutty Rom, loading hardSPL 3.29 and then moving to Laurentius V8 with radio 1.58.25.17 I can't connect to my home wireless lan. As with other roms this connection problem never was an item, I thought perhaps a stubborn byte could be the culprit. So I did hard reset the Kaiser and reinstalled the V8 twice.
Settings on handheld 'Best Performance'. Even removed the security keys from the wlan. No result. Strange, because many people don't have the slightest problem with it.
I have changed the setting to best performance, but it makes no difference, HTC is set to dhcp, I will try fixed IP and see if that makes any difference.
I have got a result ( not ideal ), the wireless connection now connects, but only when the radio is switched of (Phone) within comm manager. From this I would say that the problem lies with the Radio ROM / CAB part of this ROM, maybe Larentius could look into it.... I will try someother Radio version to see it we can resolve this...
icek said:
I have got a result ( not ideal ), the wireless connection now connects, but only when the radio is switched of (Phone) within comm manager. From this I would say that the problem lies with the Radio ROM / CAB part of this ROM, maybe Larentius could look into it.... I will try someother Radio version to see it we can resolve this...
Click to expand...
Click to collapse
Experimented with that already: No difference here.
I have also noticed that, if the Phone is switched on within in Comm Manager once the wireless connection has connected, then it remains ON. If the W/L is switched off and on again it does not connect. I will test further and report back
Sthpnz, try it like this, cause its works for me :-
Switch OFF phone
Switch ON Bluetooth
Switch ON Wireless
Switch ON Phone
ALL three, above, stay ON, until your pda goes into standby and you lose Wifi again.
I am running L26 Kaiser Diamond V8 and am able to connect to wlan easy enough, however when i connect to another wlan and then try to reconnect to my home hub at a later date it asks me to re enter my network key, tries to connect and never actually suceeds. It seems to forget the network key i constantly and tries to randomly connect through gprs??? I managed to find a way to do it by soft reseting my phone, the kaiser would then find the network on its own and connect after the network key is entered. Why it does this i don't know. I find that the radio that comes with this rom is the best i've used yet, but maybe this is its one flaw?
oh by the way the radio i'm using is 1.58.25.17
I have downgraded my Radio to 1.64.08.21, which appears to work better, if I change WiFi to best performance. However, it is now causing a problem with MS voice Command, so I will uninstall and reinstall MSVC to if I can keep this radio and MSVC working.
icek said:
Sthpnz, try it like this, cause its works for me :-
Switch OFF phone
Switch ON Bluetooth
Switch ON Wireless
Switch ON Phone
ALL three, above, stay ON, until your pda goes into standby and you lose Wifi again.
Click to expand...
Click to collapse
@isek: nope, the wlan will not connect using this recipe. Thinking about downgrading the radio. Report back later.
I'm on wlan again!
Simply by going back to Dutty's April 26 Rom with fitting radio. No problems anymore.
So what is changed:
I had Laurentius V8 with radio 1.58.25.17 and HardSPL 3.29.
Now I have Dutty's April 29th lite rom with radio 1.65.14.06 and still HardSPL 3.29
I reflashed a few roms, some worked with WiFi but then failed with MSVC. After some more searching I came across L26 Diamond V5 which has voice command and a radio which gives me WiFi & VC (both Work together). I think that the newer ROMS which have Radios that work with Wifi for me failed on MSVC because of the version of MSVC it has to be 1.6.19213 and L26 diamond V5 has this built in.
Now I have to find a MSVC 1.6.192113 CAB and try on a newer ROM..
shthpnz said:
I'm on wlan again!
Simply by going back to Dutty's April 26 Rom with fitting radio. No problems anymore.
So what is changed:
I had Laurentius V8 with radio 1.58.25.17 and HardSPL 3.29.
Now I have Dutty's April 29th lite rom with radio 1.65.14.06 and still HardSPL 3.29
Click to expand...
Click to collapse
My euphoria was not long lasting. After the first up- and downloads the kaiser could not connect anymore with the wlan. Oh yes the signal is available and strong, but it will not connect.
The only option now is to change hardspl 3.19 for an older one. I'll try that later. Now my job waits.
After alot of messing around, I now have wifi working without any issues.
My original settings for my router were a hidden network, WPA2 PSK using TKIP, I have changed TKIP to AES and my kaiser connects much more quickly and most of the time. Will this help others ? i really don't know, however, I would strongly suggest changing settings on you router as it certainly helped me.
hey guys I had a problem with l26 v9 as well turns out it don't pick up certain wifi channels being 12,13,6,5, check http://forum.xda-developers.com/showthread.php?t=405737 for more info

Internet Sharing Error?

Dear users,
I'm having trouble setting up 'Internet Sharing'.
Device informatie:
Wizard G3, T-Mobile NL, WM6 NL.
As all other programs work with my GPRS connection, Internet sharing won't connect. When I click 'connect' @ internet sharing, A balloon pops up to tell it cannot connect for unknown reason.
I had this problem with some other ROM's I tried, however, T-mobile WM5 (original) works...
Bytheway; I'm using Windows7 (won't work at XP too, already tried that) =)
Thanks for helping me out!
-- Edit --
Could'nt find anything on the net, getting full backup of my device now and trying Wm5 again within 60 minutes =)
-- > WORKED <--
@ WM5
Why not at WM6?
Which ROM do you have on your Wizard?
I have Xions WM6.1 ROM Build 20273 and I have the same problem. If I tell "Internet Sharing" to make a GPRS connection it fails. Any other program can make a GPRS connection.
Is this a Build 20273 specific problem or can it be fixed? Xions ROM is a kitchen ROM so changes can be done.
No mine is connected to GPRS but cannot connect due to a unknown error.
To solve your problem:
Settings -> Connections -> Manage existing (the gprs connection e.g. T-mobile Internet) -> Dropdown and select 'Connect'
Try again to use ICS
It does not matter if a GPRS connection is established or not. When I start "Internet Sharing" the status is alwyas disconnected. When I tell him to connect I get a bubblehelp that a connection cannot be established.
I tried it with no GPRS connection and I tried it with an established GPRS connection (discribed in your last posting). Always status: disconected!
I already build a vanaílla ROM to be sure that it is not an other software that makes the trouble.

VyprVPN on WM 6.1

hi all,
I'm trying to set up a vpn connection on my WM 6.1 device, using Giganews' VyprVPN, but I can't seem to make it work at all.
On wifi, it shows as Connected but my IP isn't changed. On 3g, it doesn't connect at all so far (french operator Bouygues)
Has anyone already used this successfully ? It is supposed to be working with WM (PPTP)
Thanks,
Moved as not software release.

Categories

Resources