Hi All,
I am havin Orange branded Kaiser.
All of sudden Sync not workin, so cant connect to computer, so I have decided to send it for repair.
But now problem is cant revertin back to soft SPL, Guys any Idea I can flash SPL through the MicroSD.
I am really stucked pls help me, will really appreciate
Thank you
sounds like your **** out of luck did you read the sticky on the top that explains how to do so? and maybe the rom you flashed was causing active sync not to work? was the phone charging? did you have the settings set correct seems like a strange thing to send a phone in for repair for to me
Can't sync is usaly a setting issue. Hard-Reset device first. If it still does not sync, send it back.
xmoo said:
Can't sync is usaly a setting issue. Hard-Reset device first. If it still does not sync, send it back.
Click to expand...
Click to collapse
I completely agree, try other USB ports and try another computer.....
Thank you 4 yr responses Guys
I already have tried with diff. sync cables and diff. computers. I tried diff ROMs(includin HTC original shipped) as well but nothing happen.
It does charge the device perfectly but One thing is bit weired it is when you enter in bootloader mode(Camera+Power+Reset) on the top in tri color screen it shows the info abt SPL version and at the bottom it shows "Serial" and when you connect to PC with sync cable it shows "USB" and if you connect with power cable only it stays with "Serial" so at least device itself recognise connection type which is normal but doesnt connect with PC, there must be something blocking the connection in the device, what I think there could be a virus.
I am really in trouble, I desperately need original SPL to revert back 4 warranty
Pls help me
Thanx
Related
I use AthenaUnlocker to unlock my Dopod 900, it seems going fine but after unlock my Dopod's screen goes off and never come back on, since then, no response to any button, reset , even can't go into bootloader, someone help me please!....
LaureateLee said:
I use AthenaUnlocker to unlock my Dopod 900, it seems going fine but after unlock my Dopod's screen goes off and never come back on, seemd then, no response to any button, reset power, even can't go into bootloader, someone help me please!....
Click to expand...
Click to collapse
have you tried a hard reset or this http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
no luck, nothing on the screen, but when remove battery the chagre light on, but with battery on universal, the chagre light off, guys any ideal?
Hi,
did you try to put device into bootloader?
which operatin system are you using? vista or xp?
can you access your device over mtty?
No! mtty said USB Port can not open,XP SP3 is my OS
Try a hard reset taking out your sd card and sim card
If works now you can reflash
Also check your battery,perhaps is too old now...
Hope it helped,
No luck still!, it can't go into bootloader at all, no matter what i do, it just don't response.
LaureateLee said:
No! mtty said USB Port can not open,XP SP3 is my OS
Click to expand...
Click to collapse
have you uncheck the "allow usb connections" in the connection settings?
you means in ActiveSync, connect right ?
YES I did.
I think you have a dead device...
Take a look on Universal UNIVERSAL_ SERVICE_ MANUAL
There is a flowchart of resolution.. (9.FTA (Faulty Tree Analysis)) on pag 77
It say's :
No led indication -> motherboard defec
red & amber ligh -> motherboard defect...
Try to go HTC services and see what they say....
as title,
how to solve this problem? i've been having that problem for about 2 month.
i wanted to flash my wm again so i need to get this fixed before i can do so.
can anyone please give me some advice to solve the problem? thankyou.
Hi, I have the same problem , take a look at the usb plug , in my case some pin is broken and now I unable to connect to pc but luckily I can recharge.
claustrox said:
Hi, I have the same problem , take a look at the usb plug , in my case some pin is broken and now I unable to connect to pc but luckily I can recharge.
Click to expand...
Click to collapse
yeh i've checked everything. i even use the different port. and cable. also tried on the other two laptop, which is the same thing T____T, i can't even charge my phone from the computer, which is the saddest.
anyone know how to fix it? i tried some way, which is from the windowsXP help and support center. i've done everything but still the same. i took it to some stalls and asked if they can fix it,and they have no clue D:
HELP HELP T_T
Ummm, I guess you tried soft reset?
And / or hard reset?
So its not recoginised at all then. Um try going to device manager and then uninstalling the driver and then press scan for new hardware and see it will reinstall correctly.
Before this reboot the computer and phone and try again as Bodisson said, that normally does it tbh
Ummmm.... maybe you could also try reinstalling ActiveSync on PC.... before SR/HR...
I have the exact same problem. I can charge but no data connection.
Tried on different computers and OSes. No luck.
I'll try to check if any pin got damaged.
where can i get the drivers for it?
If problem is only on your PC, try following:
Uninstall ActiveSync. Reboot PC. Reinstall ActiveSync (ver 4.5 - do NOT keep any previous settings for it).
That should normally be enough.
Also be careful: Similar thing can occur if you're syncing with more than one PC!
Device is sometimes recognized, but you can't sync at any time.
If problem occurs on other PCs too, then I'm afraid you have to go trough hard reset procedure.
If even that does not help, I'm afraid it's repair center time...
I had this problem, the only way for me to solve it was to have it sent to the repair centre, they changed the mainboard, and since you say that you have flashed it you havn't got any Warranty left.
I have an official Windows 7 PRO, and I use it since july with Win 7 RC and I don't know why but I have the exact same problem for 2 days now !!!
It worked fine and then, out of nowhere, now i got usb connection problem !!!
I did at least 10 hard reset, and it's the same problem on the lab top of my wife!!
Hi everybody
I have an HTC Fuze (ATT). The ROM I used was NATF v5. series. I tried a couple of days ago to sync it with my computer but it gave me an "USB device not recognized" message. I did a hard reset but it didn't change anything. I changed the "Energy" rom, but I had the same problem. I tried now to sync the phone with another laptop but I have the same message, so something happened with the phone. What I noticed was the fact that actually when I hard reseted, I still had the NATF 5.series screen shot, even if the rom was the energy one. I appreciate each answer as I don't know what I can do more.
Adriciu
adriciu said:
Hi everybody
I have an HTC Fuze (ATT). The ROM I used was NATF v5. series. I tried a couple of days ago to sync it with my computer but it gave me an "USB device not recognized" message. I did a hard reset but it didn't change anything. I changed the "Energy" rom, but I had the same problem. I tried now to sync the phone with another laptop but I have the same message, so something happened with the phone. What I noticed was the fact that actually when I hard reseted, I still had the NATF 5.series screen shot, even if the rom was the energy one. I appreciate each answer as I don't know what I can do more.
Adriciu
Click to expand...
Click to collapse
Had you try other cables Sir?
NATF splash screen will remain there, because when you flash Energy ROM, it didn't contain splash screen, so it wouldn't be replaced.
I tried a different cable, as well as a different computer. On the new computer there was no previous activesync installed. This led me to belive that there is a problem in the registry somewhere, but I don't know what to change. I also installed the Activesync 4.5 several times. on the ald and new computer, but nothing helps. No firewall active.
Adriciu
<- same problem
Anybody has any ideas?
What about using other phones, if it's okay then the problem was on Your phone, vice versa.
In my opinion, to get phone connected, we must have Activesync (for Win XP) or WMDC (for Vista) installed, good cable (original preferred) and good phone condition (H/W or S/W)
Hope You solve it soon Sir.
I have reinstalled the ATT rom, but is still gives me a "USB device not recognized" message. So I think something is wrong with my phone. Is there any way where I can clean up the whole registry and start from a clean fresh phone?
Still not working.
I had a simmilar problem a long time back.... How I fixed it was I deleted that connection setting for that phone in activesync... Then rebooted...Try to connect it then... If it still doesn;t work, UNINSTALL activesync... reboot... reboot again for good measure.. then reinstall it... reboot... Then try to connect again.... a lot of steps, but it worked for me when I put a diffrent on an old phone I had...
OK, some updates. I tried syncing with another laptop and it is not working. I tried doing the same thing with an Apple comp and it doesn't even see it as an usb device. However I tried syncing wifi with my gmail account and it is giving me the following error message: "The configuration on your Exchange server prevents you from synchronizing. Support code: 0x85010004". So I think there is a setting I don't know how to change.
Hai people,
Im new here and i got a problem with my HTC Hero. Ive got it rooted to FroydVillain through this site and it worked fine for quite a while. But since thursday my phone flipped.
My trackball keeps lighted on, whatever i do. My battery runs low in like 6 hours...normally i did a whole day with it.
When i plug the usb cable it doesnt connect to my computer, it only starts powering up the battery. If its connected with my usb cable and i remove the battery the trackball starts flickering instead off burning all the time.
I didnt know what was going on, so i tried to do a nand restore in the root menu. After that i still had problems with the trackball and it still doesnt connect to my pc. Then i tried a factory reset in the root menu, but the problems are still there.
It doesnt let me get into the mobile network settings either. It doesnt find my provider and cant change it, so at the moment my whole phone is useless
Im quite new with this whole rooting thing, so i might have messed it up now? I hope some people know a solution for this. Please dont throw to geeky stuff to me, because i might not understand it
My software settings are this according to the phone:
Firmwareversion: 2.1 update1
Smallbandversion: 63.18.55.06PU_6.35.15.11
Kernel-version: 2.6.29-063c4d24 htc-kernel(at)and18-2 #1
Build number: 3.32.405.2 CL 191507 release-keys
Softwarenumber: 3.32.405.2
Browserversion: webkit 3.1
Any help is welcome! Thanks in advance
I have tried to fix it myself cause i didnt get any responds yet, but without succes. I got it to restart again in the original htc version, and get the setup menu where u can set your country, wifi connection etc...
It doesnt recognize my sim card though, and doesnt find a provider because of that. When its finished with the setup menu its at the 'normal' home screen. But as soon as it turns black as the screen saver i cant get the screen on again.
The trackball also still keeps burning.
I went to my local phone repair point, but they dont do androids :S its for nerds he said -_-
Im getting hopeless...plx could some1 tell me what to do. I want a whole reset off the phone...i dont care losing information on it. But because i cant connect it with my computer i have no idea how to flash a rom on it
hello
i have a galaxy s6 root and run xsterolite rom. when i plug my phone to my windows 10 pc or macbook nether one of them recognize my galaxy. it say charging but nothing else. i update the driver and so on but nothing helps. even putting it in download mode and starting odin nothing? also google it and there was nothing. any ideas what to do?
What kernel are you using? It seems like the phone is in a charge only "state"?. You don't say what S6 you have? 920F? If so, try to flash Hacker kernel from here . See if that will help.
I have the same problem.. no recognition on pc only charging.. slow charging...
When i connect a usb otg hub then no recognition for the hub.. only thing pops up in the notification bar is: usb controller connected and then nothing.. tried everything.. secret codes for usb.. all seems right.. but no recognition only verry slow changing.. and damn i realy want to connect with odin for fixing but.. you can fill the rest for your self in..
Try download Shortcut master lite from playstore, run secret code explorer in it, then code 0808, and set AP and MTP+ADB to see phone as disk in windows, this helped me, hope it will help you.
Offcourse you can also try dial *#0808# and see if that works (rom dependant)
Thank you for answering!
To bad that i already tried it.. and still nothing happens
StuifzandNL said:
Thank you for answering!
To bad that i already tried it.. and still nothing happens
Click to expand...
Click to collapse
Send it back to Samsung for a warranty repair. Seems like your usb-board and/or mainboard has a problem. I had exactly the same problem, only slow charging. Got it back with a swapped mainboard and new USB-board.
Thank you! Now i know it for sure! I go to samsung with the device! Thx
I have the same problem. I send it in for repair under warranty but Samsung told me that "every change of the original software (it doesn't matter if the problem occurred because of the software change) leads to loss of the warranty." They wanted to charge me 490$ to fix the problem. I denied and changed my daughterboard by myself but the error is still there.
I think somehow we f*cked our Mainboards up.