EQO Mobile - HTC Tornado

Not sure how many are familiar with this program, but i just found it and it works great on my Tornado. It can connect to AIM/ICQ/MSN/GTalk/Jabber/Yahoo and it even has a very comfortable Home Screen Plugin and works great from what i've seen and can Hide Offline users. Something that Fring seriously lacks!
My Only "Issues" so far are Skype support which i need and i like having groups.
But that's just been picky
EQO Mobile for Symbian and WM(Smartphone/PDA)
You might also like to try Parlingo, which seems to have the same features, minus Home Scree which i didn't find.
Parlingo

Hmm.. looks nice! Do you know if this can connect through a WAN APN? That's the only connection I have, and all chat clients seem to want a direct connection to the internet (and not through a WAN proxy).

According to the website it should be able to connect thru WAP and WiFi, but as i don't have WAP settings for my cell phone network, so can't test it

Related

Problem with DNS?!

Hi there, I'm having problem connecting to the internet using WIFI on my Tornado smartphone (SP5m)... it always connects but takes a while to locate the url, it says "Locating..." in Internet Explorer for a long time and then finally open up the url. To me, it looks like a DNS issue?!
And that's using my own WIFI router at home with a DSL line (5 Mbits), no firewall on it, etc.
But whenever I'm connected to any other WIFI access point (e.g. coffee shops, etc), web pages and other internet stuff would load and open as quick as any WIFI laptop, any thoughts??
Thank you all for your time,
highmighty
I'm having similar problem on my home wifi with 128bit WEP shared key - but i never get over loading...
But I discovered that if I run Skype on the phone, it can connect and since then internet works OK (even mail through POP etc...). I have no idea how to fix it :/, it works excelently with a free wifi networks...
Yep, could it be because my personal wifi connection uses wpa encryption as oppose to no encryption at all (like in coffee shops or elsewhere)?
Try assigning IP manually.
Where would I change that? I'm running WM6 on a SP5m and I don't see where I would modify the way IP address are assigned, either auto or manual?
Thank you for your time
To threadstarter, check your router settings, are you using WEP or WPA which you did not configure on your phone.
Then check to see if you have any MAC filtering included, also ensure DHCP is enabled on your router.
Last resort, if you are using Andot's Perfect English Edition v6, there should be a WLAN IP manager in it under Accesories
You know what? I installed Opera Mini and without changing any wifi settings (router & phone), it now works ultra fast, it locates the proper URL as quick as anywhere else... Internet Explorer for mobile seems to be the problem here?!
Here you go: http://www.modaco.com/WLAN-IP-Manager-t251147.html
You can change IP, gates, DNS and so on.
IE for mobile is slow...
How come IE for mobile is taking forever to "locate" the URL while Opera Mini locates it super fast? Does IE for mobile uses a proxy to render those pages? If so, can I disable that? What other tests could I ran to isolate the issue?
I'd like to find a permanent fix because I'd like to use IE for mobile, which works fine with youtube videos... thanks to you all!

Treo 750 WM6 T-Mobile and VPN

Hi all
I recently purchased an unlocked Treo 750 with use on T-Mobile. This replaced my 700w on Verizon.
I have internet working fine, MMS reprogrammed and working. However I seem to be having problems with VPN on the phone itself.
If I tether the treo to my laptop and use it as my internet connection, I can initiate the VPN client on my laptop and all is fine.
The problem is the VPN on the phone itself when using trying to use applications directly on the phone requiring VPN (ie without the laptop). I configured it, it connects fine, however when trying to use IE or remote desktop it fails to connect.
I get a 503 error in IE on each url I try through the VPN. Makes me think it's trying to hit a proxy of some kind outside of the connection manager.
I've also tried using internet2.voicestream.com as opposed to the default wap.voicestream.com... both function identical and at same speeds. I have the total internet add-on data package.
Remote desktop fails with network not found... which kind of hints at a proxy also.
Note that I do not have any proxies set in the Connections manager, makes me think there is something hard coded.
I have checked the registry for the AutoEnable thing for proxies, but in WM6 this is already set to a value of 1.
Any advice is welcomed
If it is a PPTP VPN connection you are probably screwed, it is slowly emerging that there is a problem with the implementation of MPPE used in WM for PPTP VPN connections. I.e. VPN connects but NO traffic Tx/Rx.
Best bet, try and get your IT to setup the PIX to use L2TP/IPsec I have heard numerous reports that there are no problems with the implementation standard of that VPN connection in WM5/6/6.1.

Active sync through bluetooth

Hi Guys,
complete newby, know-nothing-boy here.
Got my xda orbit and just trying to get it all set up the way I want it to work. this is not easy given that I am a complete technophobe so everything's a massive learning curve.....
.....so, I got my orbit 2 connected to my works pc through Active sync and it talks to the calendar and everything appears to be fine and I've set up a bluetooth connection and can beam a file from my laptop to the phone. However, I cannot get my calendar/emails to up-date through bluetooth and neither me nor our IT guy can figure out why not!!!!
Can any guru on here help please.
Thanks,
David
Have you downloaded the new Mobile Device Center? Is your Laptop running XP or Vista? When I last sync'd with an XP machine via bluetooth, I could not sync contacts etc either, only worked with Vista for me.
namaste74 said:
Have you downloaded the new Mobile Device Center? Is your Laptop running XP or Vista? When I last sync'd with an XP machine via bluetooth, I could not sync contacts etc either, only worked with Vista for me.
Click to expand...
Click to collapse
I'm on XP and I have not downloaded the new mobile device centre. where should I ge tit from??
Thanks,
David
Is this possible or is it a severe problem???
Does windows mobile centre only work with vista????
Cheers,
David
Hi David,
1. You have to pair your Touch with XP
2. Create a incoming port.
3. select the incoming port in active sync for connection
4. start activesync on touch
if you need further info please use the search function.
Best Regards
Yoshi
david_miller70 said:
Is this possible or is it a severe problem???
Does windows mobile centre only work with vista????
Cheers,
David
Click to expand...
Click to collapse
Windows mobile device center works only with Vista
David,
I feel for you sir.
I've been a PDA / Pocket PC user for a LONG time. I've used a Kyocera 6035 (Palm-based Cell/PDA), Sprint 6601, Sprint 6700, AT&T 8525, and even a BlackJack II. So I've used Windows XP with a Pocket PC LOTS of times, but *I* had trouble while in Chicago this week.
A co-worker lent me his Sony VGX-UX280 for that trip. It's a Ultra Portable "laptop" with Bluetooth, Wireless, and Windows XP loaded. Having setup my phone to "tether" (aka provided an Internet Connection) to my Dell Inspiron 9400, a MacBook Pro, a MacBook, and other laptops... I didn't have any concerns about using my phone for Internet on the road. Boy, was that a mistake.
So I'm on the road, and I try to use Internet Sharing on my cell to provide a connection the laptop. It seems to connect, and the laptop tries to pull an IP connection over bluetooth, but it NEVER got a private IP address... so it assigns itself a 169 address that as many know isn't a "connected" IP for most network situations. It's a fallback, when a network device can't find a DHCP server to provide an IP address. Instead, it assigns one to itself, but it's offline.
I confirm that the "sharing" is part of the problem by running Internet Explorer. When "sharing" is connected", I couldn't get to a web page on the phone. If I disconnect, everything works as it should. So I'm like WTF?
I came out to this site and others from my phone browser, and one post said I needed ActiveSync connected between the phone and laptop to tether. So I tried setting up ActiveSync over bluetooth, but try as I might if would NEVER connect.
I then downloaded WMWifi something or other. It basically turns your WM phone into a Wireless AP so laptops and other devices can connect to the Internet. But similar to the Bluetooth problem, I couldn't pull an IP. This was VERY odd, because the Wifi program let you configure which IP numbers you wanted to use. Several options were available, such as 192.168.0.x, 192.168.1.x, up to 192.168.3.x. And there was another range as well, but none of these worked. Not even when I set a static IP address in the proper range on the laptop, or turned off the IP setting in the Wifi program, as suggested in their documentation.
So while trying to "fix" things, I tried deleting my existing Activesync profile. BAD idea, as that deleted all my contacts and such from the phone. So then I'm in Chicago, 2000 miles from home, and the only phone numbers I have with NO names is what is in my call history.
At this point, I figure I have one of two problems.
1) The config to the AT&T network on my cell is wrong, which is why the connection isn't working as it had in the past. I do know that while the AT&T settings auto-configured by the Touch Cruise weren't perfect after the wizard ran. I went out to AT&T's web site, and customized my settings to match the Tilt recommended configure. I also configured a "standard" GPRS setting that DOES NOT use the AT&T Proxy Server. That's been the ONLY way I can use Skype .6, as it can't connect to their website through Media Net.
2) One of the many programs I've installed on my phone has fouled the registry/config of my phone. I made a list of all the apps I've installed on my phone, and I suppose any one of these could have screwed up my ability to tether...
Skyfire .6
Flash Player Active X
CoreCodec Coreplayer
HTC HTC Home - Schen 2.10
MS Remote Desktop
Bluefire
Total Commander
PM Registry Editor
iNav iGuidance
Franson GpsGate 2.0
Google Maps
With the above, I can navigate anywhere in the US, connect to my work network with VPN, control my computer there like I was in my chair, and much more. But obviously not being able to get to the Internet on the road is unacceptable.
Probably will hard reset the phone this morning, and take it from there.
Sorry if it seems like I took over your thread. But like you, I had NO luck connecting ActiveSync through Bluetooth.
(Quick note: Even when I borrowed a USB Cable on the road, and tried to tether my laptop to my phone for Internet... I STILL couldn't get IE to connect to websites via my phone. I COULD use Activesync, but by then I'd already lost my contacts, etc. So I'll get that back on the phone now that I'm home.)

Remote Desktop via direct Wifi

Is there a program or way i can use remote desktop without having a router connect to my laptop. So using the built in wifi on the laptop to connect to my HD2.
Or even bluetooth..
Just an idea as I can't have a router here at uni.
are you trying to basically surf the web from your laptop using your HD2?
you need something like internet sharing which is available on the Device itself (its a standard Windows thing). you need to set it up though, and of course make sure your device has internet access (GPRS/whatever connection methods).
Nah not using the internet, but to view and control my pc from my phone over wifi.
gotcha. why would you wanna do that?
but anyway...dont think it is possible like that as the wireless on the laptop will not act as a DHCP (like a router does) to give an IP to clients who are connecting to it.
It would be cool though to be able to use it as a remote control to perhaps skip or play music etc. But connecting through wifi would be impossible i think.
I recall with my old old old sony ericsson phone I could connect to my computer using a bluetooth dongle and control music and even the mouse cursor...such an awesome feature. A bluetooth program for the HD2 would be good providing you have a bluetooth dongle.
funny you should mention an app like that as I developed an app a few years ago which does just that called WMP Remote.
basically, you connect it via bluetooth or wireless (as long as you get an activesync connection going, or even wireless with a router) and then get a list of files from a certain directly, play/pause/vol up/down from the Mobile application and play files in full screen and so on....
haven't updated it in a LONG time but was a big hit back then.
also developed another app called DAR~ling, which is a Digital Audio Recorder
firehawk2010 said:
funny you should mention an app like that as I developed an app a few years ago which does just that called WMP Remote.
Click to expand...
Click to collapse
Firehawk
It looks an awesome App, but does not work with WM6.5 & Windows 7 (not sure which one cause the issue).
IMHO worth some re-development and putting on Windows Market Place $$$ I'd buy.
Ben
aww, thats encouraging mate! Thanks!
not sure why it doesnt run on your devices? I ran it on my Samsung omnia which runs WM 6.1 - works fine.
I've also got a WM5 device...works fine on that. the issues are just the screen display!
I have been meaning to "start" the project again but just had no time at all. been so busy.
HELLO
T2 REMOTE TOUCH
Very nice program. I use it to do anything to my computer because I'm too lazy to get down of the bed. I use it when it was beta and the only bad thing was that he only had color mode for free
Anyway if you can manage to create a wireless network connection (AD-HOC) with designeted IP's it's going to work. I don't know about the port dough.
Anyway, I have windows XP, and I don't know very much about win7's configuration.
GOOD LUCK

Browsers can't connect over:80 while on gsm, however i can create traffic on :80

Hello.
I'm having an issue browsing the web 80 connections) with any browser (tried so far stock, dolphin, galapagos, miren), except opera mobile, while connected to the mobile network. The issue goes away when connected via WiFi. I believe the reason why opera works is because they use an intermediate caching server on all the mobile browsers, which probably uses compression and a non-standard port.
If I try other types of connections, for example ssh or irc, it works. Google maps, various games requiring online activity, twitter, album art downloading, aldiko online library also work.
If I configure the phone to act as a router (with the internet connection through the mobile network), I can connect with my laptop and other wifi devices to the internet and browse the web, and initiate any sort of :80 connections, but I'm still not able to do it from the phone.
I have even tried connecting over :80 with connect cat (netcat like utility) and sending GET requests. It works. So apparently, only the actual browsers don't work.
I'm on a htc desire bought from vodafone romania, with a vanilla kernel (stock android 2.2).
Not really sure what to do, #android on freenode told me to ask here.
bump bump bump.
Still an issue. Nobody has even a slight idea what might be wrong?

Categories

Resources