Hi there, I'm having problem connecting to the internet using WIFI on my Tornado smartphone (SP5m)... it always connects but takes a while to locate the url, it says "Locating..." in Internet Explorer for a long time and then finally open up the url. To me, it looks like a DNS issue?!
And that's using my own WIFI router at home with a DSL line (5 Mbits), no firewall on it, etc.
But whenever I'm connected to any other WIFI access point (e.g. coffee shops, etc), web pages and other internet stuff would load and open as quick as any WIFI laptop, any thoughts??
Thank you all for your time,
highmighty
I'm having similar problem on my home wifi with 128bit WEP shared key - but i never get over loading...
But I discovered that if I run Skype on the phone, it can connect and since then internet works OK (even mail through POP etc...). I have no idea how to fix it :/, it works excelently with a free wifi networks...
Yep, could it be because my personal wifi connection uses wpa encryption as oppose to no encryption at all (like in coffee shops or elsewhere)?
Try assigning IP manually.
Where would I change that? I'm running WM6 on a SP5m and I don't see where I would modify the way IP address are assigned, either auto or manual?
Thank you for your time
To threadstarter, check your router settings, are you using WEP or WPA which you did not configure on your phone.
Then check to see if you have any MAC filtering included, also ensure DHCP is enabled on your router.
Last resort, if you are using Andot's Perfect English Edition v6, there should be a WLAN IP manager in it under Accesories
You know what? I installed Opera Mini and without changing any wifi settings (router & phone), it now works ultra fast, it locates the proper URL as quick as anywhere else... Internet Explorer for mobile seems to be the problem here?!
Here you go: http://www.modaco.com/WLAN-IP-Manager-t251147.html
You can change IP, gates, DNS and so on.
IE for mobile is slow...
How come IE for mobile is taking forever to "locate" the URL while Opera Mini locates it super fast? Does IE for mobile uses a proxy to render those pages? If so, can I disable that? What other tests could I ran to isolate the issue?
I'd like to find a permanent fix because I'd like to use IE for mobile, which works fine with youtube videos... thanks to you all!
Related
Hi!
Lately, it seems that its not possible to view my home IP cameras through Dynamic DNS using either WiFi or GPRS when outside
Anybody faced this problem? Is DynDNS having some problem or are they not providing this feature for free anymore?
Thanks
Mine OK. Using View Commander on my Atom thru GPRS or Wifi.
Try checking if DynDns updates your Dynamic Ip address.
If all else fails....reset your IP Cam.
RE
Hi Jor,
Previously I was using ViewCommmander for viewing on my O2 XDA II when my OS was WM2003SE
Now I use the latest WM5 compatible version 3.22 of the ViewCommander Mobile on my QTEK 9000 (running WM5) but fail to get any picture while outdoor using WiFi or GPRS
There's no problem when I'm using my home network through WiFi
HI FOSA,
Have you tried using your laptop for viewing when you're outside? If the lap top works fine, then it must be the PPC connection settings...
When you;re outside, are you able the surf the web with your PPC?
If yes, likely the problem is with VCM settings. double check the settings, eg ip address, userid pw. Or create another camera setting in VCM.
Last resort....re-install VCM.
RE
Hi Jor
I'm able to connect to other people's public address but not mine, dyndns
RE
Hi jor,
Finally, I managed to use GPRS to access my home IP cameras
I changed my dyndns host to another one and re-set my router and cameras settings
Thanks for your suggestions
:lol:
I'm connecting with my HTC S710 to a WiFi with a static IP. The WiFi connection is set, I can ping other devices within the network but I can't view web pages and synchronize mails. I did lot of tests and I found that the problem is DNS! When I use IP address instead of www.something.com I can view the WWW site!
Does anybody know how to set DNS in my smartphone? DNS address is the same as gateway's in my case.
There's no possibility. Either you activate DHCP on your WiFi Gateway or you use a third party software that allows you to define WiFi profiles.
Does this one work for you? http://www.freewarepocketpc.net/ppc-download-wifi-profiles-v0-0-2.html (although it is originally designed for PPCs)
Hallo fwmone,
thanks for your post!
I have just installed the Wifi Profile program but it's for PPC so there are problems with filling in the right values. I hope I'll be able to figure out how to use it. Anyway the programmer is also Czech so I've wrote him an email asking whether he plans to build Smartphone version..
The wifi I connect to is a local provider and unfortunately he uses static IPs
I'm really surprised that Vox doesn't have such a simple thing like DNS manual settings.
Yeah, the static IP functionality is quite useless without the possibility to set a DNS server.
Means "local provider" you're using some type of wireless internet at home or is it at a location where you can't control the situation? As long as you're using the service at home, you might install a WAP that works as a repeater for the WAN and offers DHCP functionality.
Hi fwmone!
So the problem is solved! The application WiFi Profiles v0.0.5 helped. Despite it's for PPCs it is possible to use it and to set all network configuration including DNS. After applying the profile the connection works fine! GREAT!!
Thanks for your hint!
FYI: that local provider covers our street and I don't control the router/access point. But you're right WAP repeater would be also a solution.
Nice that it worked!
My VOX has stopped communicating to my router. This appears to have happened since I accidently deleted profile but that could be co-incidence..
It sees my network...
Settings VOX
Net type INTERNET
Auth WPA 2
AES
USE IEEE 802.1x YES
AEP type: Smart Card or certificate
Settings WAG200G nothing really relevent here except to say AES as above.
My phone seems to connect WITHOUT encryption but when I add encryption (with real simple password) this is where the phone can't connect for some reason... My laptop is still connected to the router without any problems there is no MAC filter or anything like that.
Anyone please help!
BTW tried hard reset not helped.
i have the exactly same problem. i tried other kinds of config on my router but nothing worked.without encripton or password it connects...
Not connecting to WIFI
Seems more people have this problem?
WPA2 does seem to be a problem. Personally I also use fixed IP, but never got my phone connected to my home network.
@work I use WEP and DHCP, no problem connecting.
@home I use, as mentioned, WPA2, AES, Fixed IP, router.
If anybody got a simple answer...?
btw, I got this problem after using other roms(for almost a year now). Basic HTC rom (WM 6.0 :-( ) seems to work fine.
Half connected in fact
Hi, I'm also getting a wifi problem after installing the RUU_Vox_HTC_FRA_1.34.406.1_4.1.13.54_03.10.90_Ship ROM (and thus resetting everything in the profile), but I wonder if it's really the same thing.
My phone connects to the wifi, gets an IP (both the phone and the router show the same IP attributed), but PIE and Outlook Pocket can not use the network. It's just like they couldn't see the network. But they don't use Edge either to connect, so they probably somehow try to send data to the network,but they fail.
Oh, and WEP encryption changes nothing. And I can't test with fully removing the encryption, as I use an internet box, not a standard router.
What I don't get is that I was browsing just fine on this ROM and the same config in my router I wish someone with more knowledge would spare a minute to help us out here or at least point us in the right direction
Solved
I upgraded the firmware on my router... :d thx
Has anyone had a problem with the Captivate when in both WIFI and 3G coverage the phone will not download or open a webpage? If I shut off one or the other it works but if both are active it hangs up and doesnt download.
Is this by chance on an enterprise wifi access point? Such as one of those expensive cisco APs you find in schools and enterprise class networks? If so, there is currently a driver problem with the captivate connecting to it, but not trasnfering data. Whether the netwrok is encrypted or open doesnt seems to matter. Personally, I find this a bigger problem than the GPS issue. I had to use wifi static to manually set IP, subnet, etc. This is a workaround, not a fix.
jhannaman82 said:
Is this by chance on an enterprise wifi access point? Such as one of those expensive cisco APs you find in schools and enterprise class networks? If so, there is currently a driver problem with the captivate connecting to it, but not trasnfering data. Whether the netwrok is encrypted or open doesnt seems to matter. Personally, I find this a bigger problem than the GPS issue. I had to use wifi static to manually set IP, subnet, etc. This is a workaround, not a fix.
Click to expand...
Click to collapse
Hey, I think I'm running into this issue at my workplace (we definitely use those Cisco APs, I see them all around). I'm connected, I have an IP, but I can't browse anywhere.
Here's the weird thing though: I can connect to the company's wifi in any other building (I guess different APs?) than the one I'm in and wifi works fine. It's just the building my cubicle's in that doesn't work and it's infuriating!
well thats dumb.
I had that happen once since I bought the phone on launch. I restarted my phone and it went away.
I've had this problem as well, usually my phone switches to only wifi pretty quickly though, so I don't notice much. The phone acts like it is using the 3G connection because the arrows are both indicating data coming and going, but nothing actually happens unless only one or the other is on.
i need to check this at more places but at home i have a standard dlink dl-624 router with no security over comcast. i think my issue initially was because of the wifi sleep policy (see below) but now i am just getting really really slow speeds. pages seem to load slower than 3G....(i mean really cinemaxHD is showing last of the mohicans in pan and scan)....also the pages time out very very frequently.....
Anyone having problems check out the advanced setting for wifi. The phone has a WIFI sleep policy. my default setting was to disconnect from wifi after the screen locks. my screen locks after 30 seconds. so basically it always looking for my network. you can change it to never.
I want to reiterate our findings again. There are multiple threads on other forums concerning this as well. When it comes to wifi, the captivate has a major problem. DHCP does not work on enterprise networks. Period. It is a driver issue. The network can be open or using any form of encryption, the results are thr same. I had numerous software, hardware and network analyst tackling this issue all week in my department. It is related in part to most enterprise networks not using a default subnet mask of 255.255.255.0. There is a workaround, but it is not a fix. You can either set a static from your static pool of ip's in wifi settings, or, if u connect to multiple networks, use wifi static from the market to remember and apply seperate static configs accross multiple networks which is what were having to do currently. This affects all captivates, one which we consider a major problem with deploying this phone to our other users.
Sent from my SAMSUNG-SGH-I897 using XDA App
I had the same problem and this is how a turn around the problem when I'm connected but cannot browse.
-Use Wifi Static
- DNS from google 8.8.8.8,8.8.4.4
- switch to airplane mode
- activate wifi
- test my conection (open the browser and surf)
- switch to phone mode
Hope it help
floppy__ said:
I had the same problem and this is how a turn around the problem when I'm connected but cannot browse.
-Use Wifi Static
- DNS from google 8.8.8.8,8.8.4.4
- switch to airplane mode
- activate wifi
- test my conection (open the browser and surf)
- switch to phone mode
Hope it help
Click to expand...
Click to collapse
Did this, Wifi Static was being used previously to bypass dhcp, and it correctly assigned the IP settings, used the static I assigned from our static pool of addresses. Still no data transfer over Cisco APs at work.
jhannaman82 said:
Did this, Wifi Static was being used previously to bypass dhcp, and it correctly assigned the IP settings, used the static I assigned from our static pool of addresses. Still no data transfer over Cisco APs at work.
Click to expand...
Click to collapse
are you able to access a website thru his IP address? in this case it's a DNS problem, try the Google DNS 8.8.8.8 - 8.8.4.4
floppy__ said:
are you able to access a website thru his IP address? in this case it's a DNS problem, try the Google DNS 8.8.8.8 - 8.8.4.4
Click to expand...
Click to collapse
Its hit or miss really, seems the wifi radio stack locks up and stops responding according to our trace logs. yes i have tried both our internal DNS server's as well as googles. Everywhere else works perfectly. But at work with our Cisco open (no security) APs, it doesnt work most of the time. Through whos ip address??? I have a static set from our static pool to make sure dhcp was not the culprit. Its def the device, and not my netwrok. I have over 100 of these APs deployed here.
Wifi works great everywhere else (at home with WPA2, etc). There is def a problem with enterprise cisco APs.
Netmask issue and cisco AP's
Posted this over in development thread.
http://forum.xda-developers.com/showpost.php?p=7698066&postcount=410
Make sure your netmask is correct.
Thanks jhannaman82
I just wanted to give a big thanks to jhannaman82 for posting his company's findings with these wifi issues. My wifi works 100% at home on my linksys tomato router (of course, with a netmask 255.255.255.0). But on my college campus they use an enterprise router setup with 255.255.0.0 and I have been going NUTS trying to figure out if it is my captivate or the network.
I can sometimes get a few minutes of working connection, but it always seems to crap out within 1 or 2 minutes.
I will attempt to fiddle around with switching the dhcp to static IP, and will post my results. Thanks!
edit: no luck with static IP fiddling so far. from my laptop (connected wirelessly), I gathered that the netmask is actually 255.255.248.0... when I set my captivate's netmask to anything other than 255.255.0.0, it does not connect. It says "connected" when I set the netmask to 255.255.0.0, but as usual no data will transfer (it seems). I'm at a loss. *shrug* Hopefully there's a driver update or something.
Thanks jhannaman82!
I just wrote a script with the GScript app: "ifconfig eth0 netmask 255.255.255.0", and have a shortcut on homescreen. The problem was that the netmask was wrongly set to 255.255.0.0 on my office wifi. Now all I need to do is tap on this shortcut at office, and the connection works!
Has anyone contacted Samsung about this ?
I'm hoping this gets fixed soon... This refuses to stay connected at my school. Huge pain.
I entered in an IP address and 255.255.252.0 for my netmask after seeing what it was on my computer and turn on flight mode and tested the wifi and now it's working. I'm not sure if it's just one of those fluke connections that I get... but we'll see.
I have a 16-node network (used mostly as a cluster computer for meteorological work), Ethernet, 3 switches, all through an ActionTec DSL gateway/router. There is an edge machine with dnsmasq for dns cache'ing and firewall. My ISP assigns three IP addresses, one of which is my network's gateway address. The ActionTec has DHCP turned "on" although I use SNAT, DNAT, and masquerading on my side. I use my internal network to serve an Apache Web site as well.
The Wi-Fi (and other reception, for that matter) is not very good here, so I bought a TrendNet TEW-636APB Wireless Access Point. It's plugged into one of the switches. The Linux hosts and hosts_files are correctly configured and dnsmasq is configured to assign an IP Address to the TEW-636APB based on its MAC.
Everything works just fine, but most importantly, the HTC One (T-mobile) has no Internet connectivity, even though I can read the IP Address assigned to the phone. Everything is on the same subnet, by the way.
Any suggestions to get Internet up and running? I regularly use bash and c-shell as well as other languages but this one has me stumped. Any suggestions?
Mike
Minneapolis, Minnesota
Additional Info for Wi-Fi Issue
I ruled out some issues in the meantime. The TEW-636APB seems to work fine. I changed each of the config options: same problem. BUT, a laptop connected using Wi-Fi for data works just fine!
On the smartphone (that HTC One), the only URL that connects is on my own network, that is, the Web site served on my subnet and inside my network works just fine. Anything outside of my network fails.
When I turn off Wi-Fi on the cell phone (and use T-Mobile), the Web works just fine.
Very confusing. Any suggestions?
Michael
Might be a DNS problem...
wxmanmichael644 said:
I ruled out some issues in the meantime. The TEW-636APB seems to work fine. I changed each of the config options: same problem. BUT, a laptop connected using Wi-Fi for data works just fine!
On the smartphone (that HTC One), the only URL that connects is on my own network, that is, the Web site served on my subnet and inside my network works just fine. Anything outside of my network fails.
When I turn off Wi-Fi on the cell phone (and use T-Mobile), the Web works just fine.
Very confusing. Any suggestions?
Michael
Click to expand...
Click to collapse
Hi Michael,
It seems to me like this a DNS problem, you should try opening google using it's ip address ( try using http ://173.194.35.132/ ) to check connectivity. Also if your phone is rooted you should be able to use some terminal like tool and try to ping some hosts to rule out the dns problem.
Cheers,
Stefan.
P.S.: please use thanks if information was helpful