Installed Jaguar 4 ROM still have the T-Mobile Splash Screen - 8125, K-JAM, P4300, MDA Vario ROM Development

Hello I Just Installed the Jaguar 4.0 WM6 ROM on My Orange SPV M3000. Everything went well thanks to the tutorial, but when I power on my Wizard It shows the T-Mobile splash screen for about 8 seconds. After that It shows the WM6 screen for some seconds.
Can anyone tell me how I can remove/replace the T-Mobile Splash screen ?
Thanks!

Find badbertˇs splash screens and there are instructions to install it. The splash screen has 3 pictures and it is about 2mb .nkb file. U need RUU and in ruu u place .nkb splash screen file. Same procedure as flashing rom.

^ Thanks a lot. Not only are the pics extra top class, but it is so easy and fast to change them.
Peace

Related

Help

I did upgrade in my O2 Neo, but after upgrade rom i´ts don´t turn on
What i cam do ?
O2 Neo is not a Magician, it is a Prophet (I think)
Anyway, we need more infor. What you do use to upgrade, where did you get it from, how do you perform your upgrade, any error message during upgrade, what's the sign now, all dark, hang on a particular screen, etc.
My Pocket is PM300 HTC
I did upgrade, and this show 100% and reset the pocket after upgrade, by this dont work, the screen splash blink only and turn off.
The led Red and Blue is blinks.
I used RomUpdateUtility HTC and the rom image i used Xda_Minis_Upgrade_v2.21.4.101
You used the ROM of a XDA-miniS (aka `Wizard`) to upgrade your `Prophet`. You are seriously screwed. You may have made yourself the most expensive paper weight you ever had.
Anyway, try see if you can boot into bootloader mode (3 colour screen). If you can do that, there are still hope.
My Pocket is PM300 HTC died
This show
IPL 2.21.0001
SPL 2.21.0001
and turn off i can´t update the rom.
What can i do ?
gmarcel said:
This show
IPL 2.21.0001
SPL 2.21.0001
and turn off i can´t update the rom.
What can i do ?
Click to expand...
Click to collapse
I need more details. That do you mean by `This show`? Where is these information shown? in the bootloader (3 colour screen) or the initial screen where your phone freeze. If you were able to get into the bootloader, you might able to get your Prophet ROM into it. Just start on bootloader mode, and plug in the USB. Activesync will not tell you anything, but you ought to able to still upgrade/refresh a Prophet ROM into it (eg running those ROM with EXE).
Can someone confirm if the ROM he used has IPL/SPL in or not?
Mod, can you move this to Prophet section.
More detail
These information shown in the bootloader (3 colour screen)
the initial screen show only O2.
i cant get bootloader, the Prophet only flashes.
The Activesync not tell anything.
I need move this for Prophet ?
gmarcel said:
These information shown in the bootloader (3 colour screen)
the initial screen show only O2.
i cant get bootloader, the Prophet only flashes.
The Activesync not tell anything.
I need move this for Prophet ?
Click to expand...
Click to collapse
Your statements are contradicting. You said you get these information from bootloader screen but you said you can get bootloader?
Anyway, if can get the bootloader screen. Just stay there. Connect it to your PC. And choose a *Prophet* ROM with EXE extension to run on your PC. It works most of the time. For step by step instruction, do a search here. I bet there are lots of similiar cases.
I can´t get bootloader
The screen with three coulours show about 3 seconds and this turn off.
I hope I'm wrong, but if your bootloader is gone, you device is gone. Hope others can help.

Help! My SDA won't boot after flashing radio rom!

I had the Iphone rom and romupdated it with the 8310 raio only rom. Now it only flashes the splashscreen and it turns off. I can't even activesync it to reflash the rom. What can I do??? Please help.
jacknjill said:
I had the Iphone rom and romupdated it with the 8310 raio only rom. Now it only flashes the splashscreen and it turns off. I can't even activesync it to reflash the rom. What can I do??? Please help.
Click to expand...
Click to collapse
can you still get to bootloader?
No more bootloader screen, just a blank white screen.
I had the bootloader screen b4 and tried to reflash it, even though flash was successful, it still turns off after splash screen. So I tried one of the Qtech bootloader roms and flash that, now it's worse than before. I only get a blank white screen when I load the bootloader.
jacknjill said:
No more bootloader screen, just a blank white screen.
I had the bootloader screen b4 and tried to reflash it, even though flash was successful, it still turns off after splash screen. So I tried one of the Qtech bootloader roms and flash that, now it's worse than before. I only get a blank white screen when I load the bootloader.
Click to expand...
Click to collapse
i also got the problem with my sda, it also happened while flashing, do u already found a solution
Guys, are you speek about one subj? Bootloader mode is activated when you start your device with camera button pressed. There is NO white screen - in bootloader mode OS is NOT loading at all! But - you can start re-flashing process as usual
If it works, I recommend you to flash back your native ROM and then check the device. If everything is fine - you know what to do If not - let's continue thread...
And one more thing - are you sure, that your SDA is based on Tornado platform? AFFAIN SDA has two reincarnations - one of them is based on Typhoon platform, other one - on Tornado one. There are a LOT of cases, when people flased Tornado ROM to the first one and had a dead device after it Be VERY carefull!!! And read this thread http://forum.xda-developers.com/showthread.php?t=288498
ZlydenGL said:
Guys, are you speek about one subj? Bootloader mode is activated when you start your device with camera button pressed. There is NO white screen - in bootloader mode OS is NOT loading at all! But - you can start re-flashing process as usual
If it works, I recommend you to flash back your native ROM and then check the device. If everything is fine - you know what to do If not - let's continue thread...
And one more thing - are you sure, that your SDA is based on Tornado platform? AFFAIN SDA has two reincarnations - one of them is based on Typhoon platform, other one - on Tornado one. There are a LOT of cases, when people flased Tornado ROM to the first one and had a dead device after it Be VERY carefull!!! And read this thread http://forum.xda-developers.com/showthread.php?t=288498
Click to expand...
Click to collapse
so in this case, it seems like it's mine, just got a white screen and no bootloader mode
I would be lucky if I can still get into bootloader mode which means there is life left. Now, all I get is a white screen on the Tornado( it's a T-mobile SDA-silver color with bump). I am looking to see if the dealer would be able to revive it. I got a MDA now
About get into bootloader there's enough hints from peoples above. Simply hold camera button while you press the power button, and soon you will see a three color stripped screen, without normal booting splash like "DOPOD". Then you'll be able to flash as you like with RUU of MTTY.
I'm just guessing you've been flashed a Radio version over 02.00.09. As I know, you have to upgrade your IPL version to 2.00 as well as a SPL upgrade to version 2.00.00, for the new RADIO to work. Just a hint you may not noticed.
there's nothing you can do. I had similar experience, went to bunch of services, no one could fix it.
Some one can repair it by "change the code lib", I don't know how to say it in english. But apparantly someone in my city can do it without touch your phone.
ccl13 said:
Some one can repair it by "change the code lib", I don't know how to say it in english. But apparantly someone in my city can do it without touch your phone.
Click to expand...
Click to collapse
That means I have to wait till next year when I head to Guangzhou to do it then.

Did I Brick my Kaiser ?

Hello all
I followed all the instructions as per the post " HardSPL will not install - WHITE SCREEN: SOLVED (UPDATE 01. March 2008)"
I upgraded the rom to Mobile Vista 1.1 and it worked fine. I then wanted to check out Laurentan's , Sleuth's and Dutty's Roms.
I Loaded the JumpSPL1.56-KAIS.exe on the Phone and proceeded to load L26_WM_6.1_PRO.V6. At 17 Percent I received an Error and went through the recovery process but afterwards it would would display tree color screen and as soon as i update it changes the screen to the white one with the p;rogress bar at the top. It however stays on 0 percent. I then tried to update via the Micro SD Card and it briefly displays the Tri color screen and then a white screen with Loading.... . It then remains there indefinitely
On the tri Color screen i have the following
Top Right RUUNBH
Left KAIS130
Left SPL-1.93.0000
Left CPLD-8
Mosquito007 said:
Hello all
I followed all the instructions as per the post " HardSPL will not install - WHITE SCREEN: SOLVED (UPDATE 01. March 2008)"
I upgraded the rom to Mobile Vista 1.1 and it worked fine. I then wanted to check out Laurentan's , Sleuth's and Dutty's Roms.
I Loaded the JumpSPL1.56-KAIS.exe on the Phone and proceeded to load L26_WM_6.1_PRO.V6. At 17 Percent I received an Error and went through the recovery process but afterwards it would would display tree color screen and as soon as i update it changes the screen to the white one with the p;rogress bar at the top. It however stays on 0 percent. I then tried to update via the Micro SD Card and it briefly displays the Tri color screen and then a white screen with Loading.... . It then remains there indefinitely
On the tri Color screen i have the following
Top Right RUUNBH
Left KAIS130
Left SPL-1.93.0000
Left CPLD-8
Click to expand...
Click to collapse
My suggestion would be to flash back to the original shipped ROM. Doesn't look like you have a HardSPL done. Anybody else have any input?
Thx All The Way
Can i load the original by renaming it to KAISIMG.nbh and running it from my SD card?
Is this the correct rom to load?
http://rapidshare.com/files/5781641....5_radio_sign_22.45.88.07_1.27.12.11_Ship.rar (64063 KB).
I just need to make sure I download the correct one as i have a really crappy internet connection and a download 60 Mb download wastes 5 hours
Thanks again
Mosquito
Mosquito007 said:
Thx All The Way
Can i load the original by renaming it to KAISIMG.nbh and running it from my SD card?
Is this the correct rom to load?
http://rapidshare.com/files/5781641....5_radio_sign_22.45.88.07_1.27.12.11_Ship.rar (64063 KB).
I just need to make sure I download the correct one as i have a really crappy internet connection and a download 60 Mb download wastes 5 hours
Thanks again
Mosquito
Click to expand...
Click to collapse
I would say that's correct but do you remember what ROM version / radio who had when you received the phone.
No unfortunately I don't. I had fingers in first and brains in neutral when the downloads finished
Mosquito007 said:
No unfortunately I don't. I had fingers in first and brains in neutral when the downloads finished
Click to expand...
Click to collapse
Try flashing to the ROM you posted via your SD Card.
Thank for the help. The Kaiser Lives again. I understand that if i dont Hard SPL I have to Load an Image and before I can load the next cooked Image I have to revert back to the original and then only load the next Cooked one.
Cheers
Newbie - On a learning curve
Click this thread, it worked for me!
http://forum.ppcgeeks.com/showthread.php?t=17623
Not sure if I'm allowed to link to another website but if it helps a fellow Kaiser user!
You need to download MTTY, then follow the instructions, if it works your Kaiser will reboot to the original ROM.
Good luck!
I wouldn't reccomend newbie to play with MTTY. It's a very dangerous toy to play with.
Read the follwoing thread" http://forum.xda-developers.com/showthread.php?t=372497&highlight=mtty
BE CAREFUL!
Amir.

Screen turn black after flash

I used Olipof to HardSPL.
The boot (tri-color) show me the information below:
- KAS1*0 MFG
- SPL-1.0.OliPof
- CPLD-8
I'm still stuck after OS boot. Windows can not be shown on the screen after AT&T and 3G appeared (Im using original Rom of AT&T). The screen turn black then...
What should I do
Lagz0ne said:
I used Olipof to HardSPL.
The boot (tri-color) show me the information below:
- KAS1*0 MFG
- SPL-1.0.OliPof
- CPLD-8
I'm still stuck after OS boot. Windows can not be shown on the screen after AT&T and 3G appeared (Im using original Rom of AT&T). The screen turn black then...
What should I do
Click to expand...
Click to collapse
flash the phone with a ROM that includes a compatible radio - like L26 or Sleuth. If you feel you've bricked your phone, I'll give you $50 for it.
As a complete noob I ran into this as well. There are threads on here that describe the solution so you may need to search for it(spoken like a true veteran ). I flashed Dutty's 6.1 rom and continued on my merry way.
No biggy, just search for "black screen".
...2nd in line if you bricked it.
<startnoob_mode>
.. searching "blank screen"
.. showing results 1 to 25 of 204. Search took 1.29 seconds.
.. (looking for something interesting...)
.. (looking)
.. (looking)
.. (still looking)
.. ah! something interesting!
.. clicking This how i bought my 8925 from black screen
..
<endnoob_mode>
Nice XML but actually it should be </startnoob_mode>
Thanks all you guy. Actually I've been affected buy white screen error .

messed up splash screen

i tried changing it with some splash flasher program and it said just use for converting files but i used it change splash screen and it made it all black except for the top it looks like tv static .... everything else works but its just that but i dont want it too be like this forever.. i tried flashing a different rom and it didnt work
im gonna unroot and flash to stock do i have to or is there a another way
please help, thanks
You can flash a new splash screen in hboot.
ok how
im new sry
Check out this thread There are instructions & a bunch of cool splash screens.

Categories

Resources